--- parser3/INSTALL 2002/02/13 13:04:33 1.5 +++ parser3/INSTALL 2005/12/16 10:19:38 1.48 @@ -1,24 +1,58 @@ -0.Assuming your perform your builds in $D directory +0.Assuming your perform your builds in $HOME directory and suggested subdirectories. -1.What is the process to compile Parser3? +1.What is the process to compile Parser3? + + First, you must have LIBGC installed (conservative garbage collector for C++). + libgc >= 6.6 + + Installation sequence of this library: + + mkdir $HOME/parser3project + mkdir $HOME/parser3project/src + cd $HOME/parser3project/src + wget http://www.hpl.hp.com/personal/Hans_Boehm/gc/gc_source/gc6.6.tar.gz + gunzip -c gc6.6.tar.gz | tar vxf - + cd gc6.6 + CPPFLAGS=USE_LIBC_PRIVATES \ + ./configure --prefix=$HOME/parser3project/gc --disable-threads --disable-shared --silent + make install + + Then you can use these Parser3 configure options to use that statically compiled gc: + --with-static-gc=$HOME/parser3project/gc/lib + In case you already have libgc.so and want to link parser against it, + you can this Parser3 configure option: + --with-shared-gc=/path/to/gc/lib + + NOTE: + On some platforms there is special version of libgc patched to support some + local piece of subtlety. + Official libgc does not work there, use special version instead. + (OpenBSD reported to be one of those) As most UNIX programs Parser3 follows the "standard": - mkdir $D/parser3project - cd $D/parser3project + mkdir $HOME/parser3project + cd $HOME/parser3project gunzip -c parser3-x.x.tar.gz | tar xvf - mv parser3-x.x parser3 cd parser3 - ./configure --prefix=/usr/local + ./configure --prefix=$HOME/parser3install --silent make That renaming is needed for SQL drivers to be able to find necessary include-file in Parser3 sources. + NOTE: + On some system you should run 'gmake'. + + NOTE: By default your would get 'parser3' binary without support of these features: - * cache(hashfile class) - * xml(xdoc and xnode classes) + * xml(xdoc and xnode classes) + Read section (3) on getting xml-abled parser. + + + Read section (4) on configure options. 2.What is the process to install Parser3? @@ -27,102 +61,168 @@ Installation layout: $prefix/bin/ parser3 -- CGI and command line Parser3 interpreter + auto.p.dist -- configuration file sample, + copy it to auto.p and adjust to your needs $prefix/etc/ - parser3.conf -- main configuration file parser3.charsets/ -- charset definition files koi8-r.cfg -- cyrillic charset [KOI8-R encoding] windows-1250.cfg -- central europian charset [windows-1250 encoding] windows-1251.cfg -- cyrillic charset [windows-1251 encoding] windows-1257.cfg -- baltic charset [windows-1257 encoding] - NOTE: - For subsequent compilations+installs - to prevent configuration files to be overwritten use - - make install-exec - - it will update parser3 binary only. - -2.What other libraries are needed to compile/install libxml ? - - * You can compile and use parser without any additional libraries. - That would be 'basic' version of it. - - - * In case you wish cache(hashfile class) support you need library - libdb 2.x.x >= 2.7.7 - on your system, and specify it to Parser3 configure script. +3.What other libraries are needed to compile/install parser? - Installation sequence of this library to $D/BerkeleyDB: - cd db-2.x.x - cd build_unix - ../dist/configure --prefix=$D - make install +3a. In case you wish XML(xdoc and xnode classes) support, you need libraries + libxml2 >= 2.6.22 + libxslt >= 1.1.15 + on your system, and specify path to them to Parser3 configure script. + Sources of libgdome library must be patched prior to compile. [library author bug confirmation pending] - Parser3 configure option is --with-db2=$D/BerkeleyDB + Installation sequence of these libraries to $HOME/parser3project/gnome: + libxml2: - * In case you wish xml(xdoc and xnode classes) support you need libraries - libxml2 >= 2.3.6 - libxslt >= 1.0.9 - glib >= 1.2.10 - gdome2 >= 0.7.0 - on your system, and specify path to them to Parser3 configure script. - - Sources of these two libraries must be patched prior to compile: - * libxml2 - * libxslt - - Installation sequence of these libraries to $D/gnome: - - libxml2: - - cd libxml2-x.x.x - patch -p0 < $D/parser3project/parser3/src/patches/libxml_error_column_tab.patch - patch -p0 < $D/parser3project/parser3/src/patches/libxml_htmloutput_of_xslemptyattr_emptyquotes.patch - patch -p0 < $D/parser3project/parser3/src/patches/libxml_transcoder_context1.patch - patch -p0 < $D/parser3project/parser3/src/patches/libxml_transcoder_context2.patch - patch -p0 < $D/parser3project/parser3/src/patches/libxml_transcoder_context3.patch - patch -p0 < $D/parser3project/parser3/src/patches/libxml_transcoder_context4.patch - ./configure --prefix=$D/gnome + cd $HOME/parser3project/src + mkdir $HOME/parser3project + wget --passive-ftp ftp://xmlsoft.org/libxml2-2.6.22.tar.gz + gunzip -c libxml2-2.6.22.tar.gz | tar vxf - + cd libxml2-2.6.22 + #sax1, output, tree, xinclude[in libxslt], html[in libxslt, mode=html?] xptr[xinclude]-- needed! + ./configure --prefix=$HOME/parser3project/gnome \ + --without-iconv --without-threads --without-debug \ + --without-iso8859x --without-legacy \ + --without-pattern --without-push --without-python \ + --without-reader --without-writer --without-readline --without-regexps \ + --without-schemas --without-schematron \ + --without-modules \ + --without-zlib \ + --disable-shared --silent + echo "int main(){return 0;}">testapi.c + echo "int main(){return 0;}">runtest.c make install libxslt: - cd libxslt-x.x.x - patch -p0 < $D/parser3project/parser3/src/patches/libxslt_html_output_no_charset_meta.patch - ./configure --with-libxml-prefix=$D/gnome --prefix=$D/gnome --without-debug --without-debugger + cd $HOME/parser3project/src + wget --passive-ftp ftp://xmlsoft.org/libxslt-1.1.15.tar.gz + gunzip -c libxslt-1.1.15.tar.gz | tar vxf - + cd libxslt-1.1.15 + ./configure --with-libxml-prefix=$HOME/parser3project/gnome --prefix=$HOME/parser3project/gnome --without-debug --without-debugger --without-crypto --without-plugins --disable-shared --silent make install - glib: [ftp://ftp.gtk.org/pub/gtk/v1.2/glib-1.2.10.tar.gz] - cd glib-x.x.x - ./configure --prefix=$D/gnome - make install + Parser3 configure options, choose whether you need static or dynamic linkage with xml libs: + --with-static-xml=$HOME/parser3project/gnome + --with-shared-xml=$HOME/parser3project/gnome + + NOTE: + In case you are using SHARED xml libraries, you may want to link in direct path to them, + use this key to specify which linker key to use do do that: + --with-pathlink=LKEY put dynamic libraries paths to binary + using linker key (-R, -rpath-link) + + Sample: + cd $HOME/parser3project/parser3 + ./configure --prefix=$HOME/parser3install \ + --with-static-gc=$HOME/parser3project/gc/lib \ + --with-static-xml=$HOME/parser3project/gnome \ + --with-sendmail="/usr/sbin/sendmail -i -t -f postmaster" \ + --silent + make install + +3b. In case you wish $mail:receive support you need libraries + glib >= 1.2.10 + gmime >= 1.0.1 [http://spruce.sourceforge.net/gmime/sources/v1.0/gmime-1.0.8.tar.gz] + on your system, and specify path to them to Parser3 configure script. - gdome2: + glib: - ./configure --with-glib-prefix=$D/gnome --disable-glibtest --with-libxml-prefix=$D/gnome --prefix=$D/gnome + cd $HOME/parser3project/src + #on freebsd5 this is reported to work: ftp://ftp.gtk.org/pub/gtk/v1.1/glib-1.1.16.tar.gz + wget --passive-ftp ftp://ftp.gtk.org/pub/gtk/v1.2/glib-1.2.10.tar.gz + gunzip -c glib-1.2.10.tar.gz | tar vxf - + cd glib-1.2.10 + ./configure --prefix=$HOME/parser3project/gnome --silent make install - And patch+copy these additional headers into install includes directory + gmime: - patch -p0 < $D/parser3project/parser3/src/patches/libgdome_cpp_syntax1.patch - patch -p0 < $D/parser3project/parser3/src/patches/libgdome_cpp_syntax2.patch - mkdir $D/gnome/include/libgdome/gdomecore - cp libgdome/gdomecore/gdome-xml-node.h $D/gnome/include/libgdome/gdomecore - cp libgdome/gdomecore/gdome-xml-document.h $D/gnome/include/libgdome/gdomecore - + cd gmime-x.x.x + ./configure --prefix=$HOME/parser3project/gnome + make install - Parser3 configure option: - --with-gnome-xml=$D/gnome + Parser3 configure options, choose whether you need static or dynamic linkage with xml libs: + --with-static-mailreceive=$HOME/parser3project/gnome + --with-shared-mailreceive=$HOME/parser3project/gnome NOTE: In case your glib as installed into some other prefix, specify it's configuration file with --with-glib-config=/path/to/your/glib-config - + NOTE: + In case you are using SHARED mime library, you may want to link in direct path to it, + use this key to specify which linker key to use do do that: + --with-pathlink=LKEY put dynamic libraries paths to binary + using linker key (-R, -rpath-link) + +4. + + In case you're not root on machine you're installing Parser, + we recommend you to do: + ./configure --prefix=$HOME/parser3install + and afterwards copy $HOME/parser3install/bin/parser3 to your CGI directory + or make a symlink [if your web server configured to follow symlinks]. + + You can disable any exec operations by setting + --disable-execs + option to configure. + file::exec, file::cgi and mail:send (unix version) methods would be disabled. + + You can enable reading and executing files, not belonging to group+user + other then effective by setting + --disable-safe-mode + option to configure. + + You can disable user-configured sendmail commands by forcing it, setting + --with=sendmail="COMMAND" + option to configure, for example: + --with-sendmail="/usr/sbin/sendmail -i -t -f postmaster" + + In case you are experiencing problem with gcc runtime exception handling, + try to configure with + --with-sjlj-exceptions + option. + + By default libstdc++ is linked statically, you can re-enable dynamic libstdc++ linkage by specifying + --with-dynamic-stdcpp + option to configure. + + + Some root config options can be specified at configure time, and would override autodetects. + + List of enabled charsets: + --with-charsets=CHARSET[,CHARSET,...] Enables charsets in root config (windows-1251, + windows-1250 windows-1257 koi8-r; Default is windows-1251) + SQL clients: + --with-mysql-client=mysqlclientlib?params + --with-pgsql-client=pgsqlclientlib?params + --with-oracle-client=oracleclientlib?params + +5. + If you need to build apache 1.3 parser module, get source distribution of apache 1.3, + run configure there, then run parser configure with one more option: + --with-apache13=Apache13 source distribution directory + after 'make' go to that directory and run + + ./p3runConfigure + + example: + ./p3runConfigure --prefix=$HOME/apache13install --enable-module=rewrite + + WARNING: if you want to use apache configure option --enable-shared=max, do this: + ./p3runConfigure --enable-shared=max --disable-shared=mod_parser3.c + Alexandr Petrosian (http://paf.design.ru) -$Id: INSTALL,v 1.5 2002/02/13 13:04:33 paf Exp $ +$Id: INSTALL,v 1.48 2005/12/16 10:19:38 paf Exp $