parser3/configure - diff

Return to configure CVS log

Up to [parser3project] / parser3

Diff for /parser3/configure between versions 1.4 and 1.38

-version 1.4, 2002/02/06 16:15:50
+version 1.38, 2002/09/04 15:20:53
  Line 12  ac_help=
  ac_default_prefix=/usr/local
  # Any additions from configure.in:
  ac_help="$ac_help
+   --disable-link-libstdcpp to disable libstdc++ linkage,
+                           if you belive you do not need one"
+ ac_help="$ac_help
    --disable-string-origins to switch off string origin tracking"
  ac_help="$ac_help
-   --with-apache13[=D]     D is the Apache13 source distribution directory
+   --disable-execs         to disable any execs
-                           builds library for apache_module using that dir
+                           (file::exec, file::cgi, unix mail:send)"
-                           (do not add /src)"
+ ac_help="$ac_help
+   --disable-foreign-group-files to disable read and executing
+                           files belonging to group other then effective"
+ ac_help="$ac_help
+   --with-charsets=CHARSET[,CHARSET,...]  Enables charsets in root config (windows-1251,
+                           windows-1250 windows-1257 koi8-r; Default is windows-1251)"
+ ac_help="$ac_help
+   --with-mysql-client=mysqlclientlib?withparams
+                           MySQL client dynamic library to root config"
  ac_help="$ac_help
-   --with-pathlink[=LKEY]  put dynamic libraries paths to binary
+   --with-pgsql-client=pgsqlclientlib?withparams
+                           PgSQL client dynamic library to root config"
+ ac_help="$ac_help
+   --with-oracle-client=oracleclientlib?withparams
+                           Oracle client dynamic library"
+ ac_help="$ac_help
+   --with-pathlink=LKEY    put dynamic libraries paths to binary
                            using linker key (-R, -rpath-link)"
  ac_help="$ac_help
-   --with-gnome-xml[=D]    D is the directory where
+   --with-sjlj-exceptions  enable simple 'throw' from dynamic library"
-                           Gnome XML libraries are installed"
+ ac_help="$ac_help
+   --with-glib-config=FILE FILE is glib library
+                           configuration file (search for glib*-config)"
  ac_help="$ac_help
-   --with-db2[=D]          D is the DB2 installation directory
+   --with-shared-xml=D     D is the directory where
-                           DO NOT FORGET TO COMPILE DB2 WITH EXCEPTIONS SUPPORT!"
+                           Gnome XML libraries are installed (shared libs)"
  ac_help="$ac_help
-   --enable-shared[=PKGS]  build shared libraries [default=yes]"
+   --with-static-xml=D     D is the directory where
+                           Gnome XML libraries are installed (static libs)"
  ac_help="$ac_help
-   --enable-static[=PKGS]  build static libraries [default=yes]"
+   --with-shared-mailreceive=D is the directory where
+                                Gnome MIME library is installed (shared lib)"
  ac_help="$ac_help
-   --enable-fast-install[=PKGS]  optimize for fast installation [default=yes]"
+   --with-static-mailreceive=D is the directory where
+                           Gnome MIME library is installed (static lib)"
  ac_help="$ac_help
-   --with-gnu-ld           assume the C compiler uses GNU ld [default=no]"
+   \"--with-sendmail=COMMAND\" forces this command to send mail.
+                           example: \"--with-sendmail=/usr/sbin/sendmail -t\"
+                           (makes parser ignore user-defined sendmail commands)"
  ac_help="$ac_help
-   --disable-libtool-lock  avoid locking (might break parallel builds)"
+   --with-apache13=D       D is the Apache13 source distribution directory
+                           builds library for apache_module using that dir
+                           (do not add /src)"
  # Initialize some variables set by options.
  # The variables have the same names as the options, with
- Line 577  ac_configure=$ac_aux_dir/configure # Thi
+ Line 603  ac_configure=$ac_aux_dir/configure # Thi
  # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
  # ./install, which can be erroneously created by make from ./install.sh.
  echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
- echo "configure:581: checking for a BSD compatible install" >&5
+ echo "configure:607: checking for a BSD compatible install" >&5
  if test -z "$INSTALL"; then
  if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
- Line 630  test -z "$INSTALL_SCRIPT" && INSTALL_SCR
+ Line 656  test -z "$INSTALL_SCRIPT" && INSTALL_SCR
  test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
  echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
- echo "configure:634: checking whether build environment is sane" >&5
+ echo "configure:660: checking whether build environment is sane" >&5
  # Just in case
  sleep 1
  echo timestamp > conftestfile
- Line 687  test "$program_suffix" != NONE &&
+ Line 713  test "$program_suffix" != NONE &&
  test "$program_transform_name" = "" && program_transform_name="s,x,x,"
  echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
- echo "configure:691: checking whether ${MAKE-make} sets \${MAKE}" >&5
+ echo "configure:717: checking whether ${MAKE-make} sets \${MAKE}" >&5
  set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
  if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
- Line 716  fi
+ Line 742  fi
  PACKAGE=parser
- VERSION=3.0b
+ VERSION=3.0.HEAD
  if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
    { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
- Line 726  fi
+ Line 752  fi
  missing_dir=`cd $ac_aux_dir && pwd`
  echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
- echo "configure:730: checking for working aclocal" >&5
+ echo "configure:756: checking for working aclocal" >&5
  # Run test in a subshell; some versions of sh will print an error if
  # an executable is not found, even if stderr is redirected.
  # Redirect stdin to placate older versions of autoconf.  Sigh.
- Line 739  else
+ Line 765  else
  fi
  echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
- echo "configure:743: checking for working autoconf" >&5
+ echo "configure:769: checking for working autoconf" >&5
  # Run test in a subshell; some versions of sh will print an error if
  # an executable is not found, even if stderr is redirected.
  # Redirect stdin to placate older versions of autoconf.  Sigh.
- Line 752  else
+ Line 778  else
  fi
  echo $ac_n "checking for working automake""... $ac_c" 1>&6
- echo "configure:756: checking for working automake" >&5
+ echo "configure:782: checking for working automake" >&5
  # Run test in a subshell; some versions of sh will print an error if
  # an executable is not found, even if stderr is redirected.
  # Redirect stdin to placate older versions of autoconf.  Sigh.
- Line 765  else
+ Line 791  else
  fi
  echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
- echo "configure:769: checking for working autoheader" >&5
+ echo "configure:795: checking for working autoheader" >&5
  # Run test in a subshell; some versions of sh will print an error if
  # an executable is not found, even if stderr is redirected.
  # Redirect stdin to placate older versions of autoconf.  Sigh.
- Line 778  else
+ Line 804  else
  fi
  echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
- echo "configure:782: checking for working makeinfo" >&5
+ echo "configure:808: checking for working makeinfo" >&5
  # Run test in a subshell; some versions of sh will print an error if
  # an executable is not found, even if stderr is redirected.
  # Redirect stdin to placate older versions of autoconf.  Sigh.
- Line 792  fi
+ Line 818  fi
- P3S=`pwd`
+ P3S=`cd $srcdir/src ; pwd`
  PARSER_VERSION=$VERSION
- echo "/* automatically generated by configure */" > src/include/pa_version.h.new
+ echo "/* automatically generated by configure */" > $srcdir/src/include/pa_version.h.new
- echo "/* edit configure.in to change version number */" >> src/include/pa_version.h.new
+ echo "/* edit configure.in to change version number */" >> $srcdir/src/include/pa_version.h.new
- echo "#define PARSER_VERSION \"$PARSER_VERSION\"" >> src/include/pa_version.h.new
+ echo "#define PARSER_VERSION \"$PARSER_VERSION\"" >> $srcdir/src/include/pa_version.h.new
- cmp src/include/pa_version.h.new src/include/pa_version.h >/dev/null 2>&1
+ cmp $srcdir/src/include/pa_version.h.new $srcdir/src/include/pa_version.h >/dev/null 2>&1
  if test $? -ne 0 ; then
-     rm -f src/include/pa_version.h && mv src/include/pa_version.h.new src/include/pa_version.h && \
+     rm -f $srcdir/src/include/pa_version.h && mv $srcdir/src/include/pa_version.h.new $srcdir/src/include/pa_version.h && \
-     echo 'Updated src/include/pa_version.h'
+     echo Updated $srcdir/src/include/pa_version.h
  else
-         rm -f src/include/pa_version.h.new
+         rm -f $srcdir/src/include/pa_version.h.new
  fi
  # Find a good install program.  We prefer a C program (faster),
- Line 819  fi
+ Line 845  fi
  # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
  # ./install, which can be erroneously created by make from ./install.sh.
  echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
- echo "configure:823: checking for a BSD compatible install" >&5
+ echo "configure:849: checking for a BSD compatible install" >&5
  if test -z "$INSTALL"; then
  if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
- Line 874  test -z "$INSTALL_DATA" && INSTALL_DATA=
+ Line 900  test -z "$INSTALL_DATA" && INSTALL_DATA=
  # Extract the first word of "gcc", so it can be a program name with args.
  set dummy gcc; ac_word=$2
  echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
- echo "configure:878: checking for $ac_word" >&5
+ echo "configure:904: checking for $ac_word" >&5
  if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
- Line 904  if test -z "$CC"; then
+ Line 930  if test -z "$CC"; then
    # Extract the first word of "cc", so it can be a program name with args.
  set dummy cc; ac_word=$2
  echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
- echo "configure:908: checking for $ac_word" >&5
+ echo "configure:934: checking for $ac_word" >&5
  if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
- Line 955  fi
+ Line 981  fi
        # Extract the first word of "cl", so it can be a program name with args.
  set dummy cl; ac_word=$2
  echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
- echo "configure:959: checking for $ac_word" >&5
+ echo "configure:985: checking for $ac_word" >&5
  if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
- Line 987  fi
+ Line 1013  fi
  fi
  echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
- echo "configure:991: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+ echo "configure:1017: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
  ac_ext=c
  # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
- Line 998  cross_compiling=$ac_cv_prog_cc_cross
+ Line 1024  cross_compiling=$ac_cv_prog_cc_cross
  cat > conftest.$ac_ext << EOF
- #line 1002 "configure"
+ #line 1028 "configure"
  #include "confdefs.h"
  main(){return(0);}
  EOF
- if { (eval echo configure:1007: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ if { (eval echo configure:1033: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
    ac_cv_prog_cc_works=yes
    # If we can't run a trivial program, we are probably using a cross compiler.
    if (./conftest; exit) 2>/dev/null; then
- Line 1029  if test $ac_cv_prog_cc_works = no; then
+ Line 1055  if test $ac_cv_prog_cc_works = no; then
    { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
  fi
  echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
- echo "configure:1033: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+ echo "configure:1059: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
  echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
  cross_compiling=$ac_cv_prog_cc_cross
  echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
- echo "configure:1038: checking whether we are using GNU C" >&5
+ echo "configure:1064: checking whether we are using GNU C" >&5
  if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
- Line 1043  else
+ Line 1069  else
    yes;
  #endif
  EOF
- if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1047: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1073: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
    ac_cv_prog_gcc=yes
  else
    ac_cv_prog_gcc=no
- Line 1062  ac_test_CFLAGS="${CFLAGS+set}"
+ Line 1088  ac_test_CFLAGS="${CFLAGS+set}"
  ac_save_CFLAGS="$CFLAGS"
  CFLAGS=
  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
- echo "configure:1066: checking whether ${CC-cc} accepts -g" >&5
+ echo "configure:1092: checking whether ${CC-cc} accepts -g" >&5
  if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
- Line 1100  ac_compile='${CC-cc} -c $CFLAGS $CPPFLAG
+ Line 1126  ac_compile='${CC-cc} -c $CFLAGS $CPPFLAG
  ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
  cross_compiling=$ac_cv_prog_cc_cross
   echo $ac_n "checking for inline""... $ac_c" 1>&6
- echo "configure:1104: checking for inline" >&5
+ echo "configure:1130: checking for inline" >&5
  if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
    ac_cv_c_inline=no
  for ac_kw in inline __inline__ __inline; do
    cat > conftest.$ac_ext <<EOF
- #line 1111 "configure"
+ #line 1137 "configure"
  #include "confdefs.h"
  int main() {
  } $ac_kw foo() {
  ; return 0; }
  EOF
- if { (eval echo configure:1118: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ if { (eval echo configure:1144: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
    rm -rf conftest*
    ac_cv_c_inline=$ac_kw; break
  else
- Line 1144  do
+ Line 1170  do
  # Extract the first word of "$ac_prog", so it can be a program name with args.
  set dummy $ac_prog; ac_word=$2
  echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
- echo "configure:1148: checking for $ac_word" >&5
+ echo "configure:1174: checking for $ac_word" >&5
  if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
- Line 1176  test -n "$CXX" || CXX="gcc"
+ Line 1202  test -n "$CXX" || CXX="gcc"
  echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
- echo "configure:1180: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+ echo "configure:1206: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
  ac_ext=C
  # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
- Line 1187  cross_compiling=$ac_cv_prog_cxx_cross
+ Line 1213  cross_compiling=$ac_cv_prog_cxx_cross
  cat > conftest.$ac_ext << EOF
- #line 1191 "configure"
+ #line 1217 "configure"
  #include "confdefs.h"
  int main(){return(0);}
  EOF
- if { (eval echo configure:1196: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ if { (eval echo configure:1222: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
    ac_cv_prog_cxx_works=yes
    # If we can't run a trivial program, we are probably using a cross compiler.
    if (./conftest; exit) 2>/dev/null; then
- Line 1218  if test $ac_cv_prog_cxx_works = no; then
+ Line 1244  if test $ac_cv_prog_cxx_works = no; then
    { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
  fi
  echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
- echo "configure:1222: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+ echo "configure:1248: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
  echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
  cross_compiling=$ac_cv_prog_cxx_cross
  echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
- echo "configure:1227: checking whether we are using GNU C++" >&5
+ echo "configure:1253: checking whether we are using GNU C++" >&5
  if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
- Line 1232  else
+ Line 1258  else
    yes;
  #endif
  EOF
- if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1236: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1262: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
    ac_cv_prog_gxx=yes
  else
    ac_cv_prog_gxx=no
- Line 1251  ac_test_CXXFLAGS="${CXXFLAGS+set}"
+ Line 1277  ac_test_CXXFLAGS="${CXXFLAGS+set}"
  ac_save_CXXFLAGS="$CXXFLAGS"
  CXXFLAGS=
  echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
- echo "configure:1255: checking whether ${CXX-g++} accepts -g" >&5
+ echo "configure:1281: checking whether ${CXX-g++} accepts -g" >&5
  if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
- Line 1292  cross_compiling=$ac_cv_prog_cxx_cross
+ Line 1318  cross_compiling=$ac_cv_prog_cxx_cross
+ # Check whether --enable-link-libstdcpp or --disable-link-libstdcpp was given.
+ if test "${enable_link_libstdcpp+set}" = set; then
+   enableval="$enable_link_libstdcpp"
+ LINK_LIBSTDCPP_FLAG=$enableval
+ if test "$enableval" = "no"; then
+         echo "configure: warning: disabling libstdc++ linkage" 1>&2
+ fi
+ fi
+ if test "$LINK_LIBSTDCPP_FLAG" = "no"; then
+   DO_NOT_LINK_LIBSTDCPP_TRUE=
+   DO_NOT_LINK_LIBSTDCPP_FALSE='#'
+ else
+   DO_NOT_LINK_LIBSTDCPP_TRUE='#'
+   DO_NOT_LINK_LIBSTDCPP_FALSE=
+ fi
  # Check whether --enable-string-origins or --disable-string-origins was given.
  if test "${enable_string_origins+set}" = set; then
    enableval="$enable_string_origins"
  if test "$enableval" = "no"; then
+         echo "configure: warning: disabling string origin tracking" 1>&2
          cat >> confdefs.h <<\EOF
  #define NO_STRING_ORIGIN
  EOF
- Line 1307  fi
+ Line 1356  fi
  fi
- # Check whether --with-apache13 or --without-apache13 was given.
+ # Check whether --enable-execs or --disable-execs was given.
- if test "${with_apache13+set}" = set; then
+ if test "${enable_execs+set}" = set; then
-   withval="$with_apache13"
+   enableval="$enable_execs"
-   APACHE13=$withval
-     if test \! -f "$APACHE13/src/include/httpd.h"; then
+ if test "$enableval" = "no"; then
-         { echo "configure: error: $APACHE13 does not seem to be valid Apache13 source distribution directory" 1>&2; exit 1; }
+         echo "configure: warning: disabling file execs" 1>&2
-     fi
+         cat >> confdefs.h <<\EOF
+ #define NO_PA_EXECS
+ EOF
  fi
+ fi
+ # Check whether --enable-foreign-group-files or --disable-foreign-group-files was given.
+ if test "${enable_foreign_group_files+set}" = set; then
+   enableval="$enable_foreign_group_files"
+ if test "$enableval" = "no"; then
+         echo "configure: warning: disabling reading of files belonging to group other then effective" 1>&2
+         cat >> confdefs.h <<\EOF
+ #define NO_FOREIGN_GROUP_FILES
+ EOF
+ fi
+ fi
+ srccharsetsdir=$srcdir/etc/parser3.charsets
+ CHARSETS_REQUESTED="windows-1251"
+ # Check whether --with-charsets or --without-charsets was given.
+ if test "${with_charsets+set}" = set; then
+   withval="$with_charsets"
+   CHARSETS_REQUESTED=`echo $withval | sed -e 's/,/ /g'`
+ fi
+ # Checking whether all requested charsets have corresponding .cfg files
+ for c in $CHARSETS_REQUESTED; do
+         if test \! -f $srccharsetsdir/$c.cfg; then
+                 { echo "configure: error: bad charset requested "$c" - file $srccharsetsdir/$c.cfg not found" 1>&2; exit 1; }
+         fi
+ done
+ # Switching on commentcharset_XXX='#'
+         commentcharset_windows1251='#'
+         for c in $CHARSETS_REQUESTED; do
+                 if test "windows-1251" = "$c"; then
+                         echo "configure: warning: Enabling charset windows-1251" 1>&2
+                         commentcharset_windows1251=
+                 fi
+         done
+         commentcharset_windows1250='#'
+         for c in $CHARSETS_REQUESTED; do
+                 if test "windows-1250" = "$c"; then
+                         echo "configure: warning: Enabling charset windows-1250" 1>&2
+                         commentcharset_windows1250=
+                 fi
+         done
+         commentcharset_windows1257='#'
+         for c in $CHARSETS_REQUESTED; do
+                 if test "windows-1257" = "$c"; then
+                         echo "configure: warning: Enabling charset windows-1257" 1>&2
+                         commentcharset_windows1257=
+                 fi
+         done
+         commentcharset_koi8r='#'
+         for c in $CHARSETS_REQUESTED; do
+                 if test "koi8-r" = "$c"; then
+                         echo "configure: warning: Enabling charset koi8-r" 1>&2
+                         commentcharset_koi8r=
+                 fi
+         done
+ # Check whether --with-mysql-client or --without-mysql-client was given.
+ if test "${with_mysql_client+set}" = set; then
+   withval="$with_mysql_client"
+   mysql_client=$withval
+ else
+   echo $ac_n "checking for mysql client""... $ac_c" 1>&6
+ echo "configure:1458: checking for mysql client" >&5
+         for lib in \
+                 /usr/local/lib/mysql/libmysqlclient.so \
+                 /usr/local/lib/libmysqlclient.so \
+                 /usr/lib/libmysqlclient.so; do
+                 if test -f $lib; then mysql_client=$lib; fi
+         done
+         if test -z "$mysql_client"; then
+                 mysql_client="-configure could not guess-"
+                 echo "configure: warning: could not guess mysql client" 1>&2
+         else
+                 echo "$ac_t""$mysql_client" 1>&6
+         fi
+ fi
+ # Check whether --with-pgsql-client or --without-pgsql-client was given.
+ if test "${with_pgsql_client+set}" = set; then
+   withval="$with_pgsql_client"
+   mysql_client=$withval
+ else
+   echo $ac_n "checking for pgsql client""... $ac_c" 1>&6
+ echo "configure:1485: checking for pgsql client" >&5
+         for lib in \
+                 /usr/local/pgsql/lib/libpq.so \
+                 /usr/local/lib/libpq.so \
+                 /usr/lib/libpq.so; do
+                 if test -f $lib; then pgsql_client=$lib; fi
+         done
+         if test -z "$pgsql_client"; then
+                 pgsql_client="-configure could not guess-"
+                 echo "configure: warning: could not guess pgsql client" 1>&2
+         else
+                 echo "$ac_t""$pgsql_client" 1>&6
+         fi
- if test -n "$APACHE13"; then
-   COMPILE_APACHE13_MODULE_TRUE=
-   COMPILE_APACHE13_MODULE_FALSE='#'
- else
-   COMPILE_APACHE13_MODULE_TRUE='#'
-   COMPILE_APACHE13_MODULE_FALSE=
  fi
+ # Check whether --with-oracle-client or --without-oracle-client was given.
+ if test "${with_oracle_client+set}" = set; then
+   withval="$with_oracle_client"
+   oracle_client=$withval
+ else
+   echo $ac_n "checking for oracle client""... $ac_c" 1>&6
+ echo "configure:1512: checking for oracle client" >&5
+         lib=$ORACLE_HOME/lib/libclntsh.so
+         if test -f $lib; then oracle_client=$lib; fi
+         if test -z "$oracle_client"; then
+                 oracle_client="-configure could not guess-"
+                 echo "configure: warning: could not guess oracle client" 1>&2
+         else
+                 oracle_client="$oracle_client?ORACLE_HOME=$ORACLE_HOME&ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data"
+                 echo "$ac_t""$oracle_client" 1>&6
+         fi
+ fi
  # Check whether --with-pathlink or --without-pathlink was given.
  if test "${with_pathlink+set}" = set; then
    withval="$with_pathlink"
- Line 1336  if test "${with_pathlink+set}" = set; th
+ Line 1534  if test "${with_pathlink+set}" = set; th
  fi
+ # Check whether --with-sjlj-exceptions or --without-sjlj-exceptions was given.
+ if test "${with_sjlj_exceptions+set}" = set; then
+   withval="$with_sjlj_exceptions"
+   cat >> confdefs.h <<\EOF
+ #define PA_WITH_SJLJ_EXCEPTIONS
+ EOF
+ fi
- # Check whether --with-gnome-xml or --without-gnome-xml was given.
- if test "${with_gnome_xml+set}" = set; then
+ # Check whether --with-glib-config or --without-glib-config was given.
-   withval="$with_gnome_xml"
+ if test "${with_glib_config+set}" = set; then
+   withval="$with_glib_config"
+   GLIB_CONFIG=$withval
+ fi
+ # Check whether --with-shared-xml or --without-shared-xml was given.
+ if test "${with_shared_xml+set}" = set; then
+   withval="$with_shared_xml"
      GNOME_XML=$withval
-     XMLBIN_DIR="$GNOME_XML/bin"
+     XMLBIN="$GNOME_XML/bin"
-     XMLINC_DIR="$GNOME_XML/include"
+     XMLINC="$GNOME_XML/include"
-     XMLLIB_DIR="$GNOME_XML/lib"
+     XMLLIB="$GNOME_XML/lib"
-     if test \! -d $XMLBIN_DIR -o \! -d $XMLINC_DIR -o \! -d $XMLLIB_DIR; then
+     if test \! -d $XMLBIN -o \! -d $XMLINC -o \! -d $XMLLIB; then
          { echo "configure: error: $GNOME_XML does not seem to be valid Gnome installation directory" 1>&2; exit 1; }
      fi
- Line 1355  if test "${with_gnome_xml+set}" = set; t
+ Line 1572  if test "${with_gnome_xml+set}" = set; t
  EOF
-     LIBXML2_SO_NAME=`cd $XMLLIB_DIR ; ls libxml2.?? libxml2.??? 2>/dev/null | grep -v \.la$ | sed 's/lib//' | sed 's/\..*//'`
+     LIBXML2_SO_NAME=`cd $XMLLIB ; ls libxml2.?? libxml2.??? 2>/dev/null | grep -v \.la$ | sed 's/lib//' | sed 's/\..*//'`
-     if test -z "$LIBXML2_SO_NAME"; then
+     LIBGDOME_SO_NAME=`cd $XMLLIB ; ls libgdome.?? libgdome.??? 2>/dev/null | grep -v \.la$ | sed 's/lib//' | sed 's/\..*//'`
-         { echo "configure: error: $LIBXML_DIR does not containt XML2 dynamic library" 1>&2; exit 1; }
+     LIBXSLT_SO_NAME=`cd $XMLLIB ; ls libxslt.?? libxslt.??? 2>/dev/null | grep -v \.la$ | sed 's/lib//' | sed 's/\..*//'`
-     fi
+     LIBEXSLT_SO_NAME=`cd $XMLLIB ; ls libexslt.?? libexslt.??? 2>/dev/null | grep -v \.la$ | sed 's/lib//' | sed 's/\..*//'`
-     LIBGDOME_SO_NAME=`cd $XMLLIB_DIR ; ls libgdome.?? libgdome.??? 2>/dev/null | grep -v \.la$ | sed 's/lib//' | sed 's/\..*//'`
-     if test -z "$LIBGDOME_SO_NAME"; then
+     if test -z "$GLIB_CONFIG"; then
-         { echo "configure: error: $LIBXML_DIR does not containt GDOME dynamic library" 1>&2; exit 1; }
+             GLIB_CONFIG=$XMLBIN/glib-config
-     fi
+             if test \! -x $GLIB_CONFIG; then
-     LIBXSLT_SO_NAME=`cd $XMLLIB_DIR ; ls libxslt.?? libxslt.??? 2>/dev/null | grep -v \.la$ | sed 's/lib//' | sed 's/\..*//'`
+                 GLIB_CONFIG=glib-config
-     if test -z "$LIBXSLT_SO_NAME"; then
+             fi
-         { echo "configure: error: $LIBXML_DIR does not containt XSLT dynamic library" 1>&2; exit 1; }
-     fi
-     LIBEXSLT_SO_NAME=`cd $XMLLIB_DIR ; ls libexslt.?? libexslt.??? 2>/dev/null | grep -v \.la$ | sed 's/lib//' | sed 's/\..*//'`
-     if test -z "$LIBEXSLT_SO_NAME"; then
-         { echo "configure: error: $LIBXML_DIR does not containt EXSLT dynamic library" 1>&2; exit 1; }
-     fi
-     GLIB_CONFIG=$XMLBIN_DIR/glib-config
-     if test \! -x $GLIB_CONFIG; then
-         GLIB_CONFIG=glib-config
      fi
      GLIB_CFLAGS=`$GLIB_CONFIG --cflags`
      GLIB_LIBS=`$GLIB_CONFIG --libs`
-     XML_INCLUDES="$GLIB_CFLAGS -I$XMLINC_DIR -I$XMLINC_DIR/libgdome -I$XMLINC_DIR/libxml2"
+     XML_INCLUDES="$GLIB_CFLAGS -I$XMLINC -I$XMLINC/libgdome -I$XMLINC/libxml2"
-     XML_LIBS="-L$XMLLIB_DIR -lglib -l$LIBXML2_SO_NAME -l$LIBGDOME_SO_NAME -l$LIBXSLT_SO_NAME -l$LIBEXSLT_SO_NAME"
+     XML_LIBS="$GLIB_LIBS -L$XMLLIB -l$LIBXML2_SO_NAME -l$LIBGDOME_SO_NAME -l$LIBXSLT_SO_NAME -l$LIBEXSLT_SO_NAME"
      if test \! -z "$LD_PATHLINK"; then
-         XML_LIBS="$XML_LIBS -Wl,$LD_PATHLINK -Wl,$XMLLIB_DIR"
+         XML_LIBS="$XML_LIBS -Wl,$LD_PATHLINK -Wl,$XMLLIB"
      fi
  fi
+ # Check whether --with-static-xml or --without-static-xml was given.
+ if test "${with_static_xml+set}" = set; then
+   withval="$with_static_xml"
+     GNOME_XML=$withval
+     XMLBIN="$GNOME_XML/bin"
+     XMLINC="$GNOME_XML/include"
+     XMLLIB="$GNOME_XML/lib"
+     if test \! -d $XMLBIN -o \! -d $XMLINC -o \! -d $XMLLIB; then
+         { echo "configure: error: $GNOME_XML does not seem to be valid Gnome installation directory" 1>&2; exit 1; }
+     fi
+     cat >> confdefs.h <<\EOF
+ #define XML
+ EOF
- # Check whether --with-db2 or --without-db2 was given.
+     if test -z "$GLIB_CONFIG"; then
- if test "${with_db2+set}" = set; then
+             GLIB_CONFIG=$XMLBIN/glib-config
-   withval="$with_db2"
+             if test \! -x $GLIB_CONFIG; then
-   DB2_INST=$withval
+                 GLIB_CONFIG=glib-config
-     if test \! -f "$DB2_INST/include/db.h"; then
+             fi
-         { echo "configure: error: $DB2_INST does not seem to be valid DB2 installation directory" 1>&2; exit 1; }
      fi
-     if test \! -f "$DB2_INST/lib/libdb.a"; then
+     GLIB_CFLAGS=`$GLIB_CONFIG --cflags`
-         { echo "configure: error: $DB2_INST does not seem to be valid DB2 installation directory" 1>&2; exit 1; }
+     GLIB_DIR=`$GLIB_CONFIG --libs | sed 's/.*-L\([^ ]*\).*/\1/'`
+     GLIB_NAME=`$GLIB_CONFIG --libs | sed 's/.*-l\([^ ]*\).*/\1/'`
+     XML_INCLUDES="$GLIB_CFLAGS -I$XMLINC -I$XMLINC/libgdome -I$XMLINC/libxml2"
+     XML_LIBS="$XMLLIB/libgdome.a $XMLLIB/libxslt.a $XMLLIB/libexslt.a $XMLLIB/libxml2.a $GLIB_DIR/lib$GLIB_NAME.a"
+ fi
+ # Check whether --with-shared-mailreceive or --without-shared-mailreceive was given.
+ if test "${with_shared_mailreceive+set}" = set; then
+   withval="$with_shared_mailreceive"
+     GNOME_MIME=$withval
+     MIMEBIN="$GNOME_MIME/bin"
+     MIMEINC="$GNOME_MIME/include"
+     MIMELIB="$GNOME_MIME/lib"
+     if test \! -d $MIMEBIN -o \! -d $MIMEINC -o \! -d $MIMELIB; then
+         { echo "configure: error: $GNOME_MIME does not seem to be valid Gnome installation directory" 1>&2; exit 1; }
      fi
-     echo $ac_n "checking version of LIBDB""... $ac_c" 1>&6
+     cat >> confdefs.h <<\EOF
- echo "configure:1406: checking version of LIBDB" >&5
+ #define WITH_MAILRECEIVE
-     cat > conftest.$ac_ext <<EOF
- #line 1408 "configure"
- #include "confdefs.h"
- #include <$DB2_INST/include/db.h>
- int main() {
- #ifdef DB_VERSION_MAJOR
-     #   if DB_VERSION_MAJOR!=2
-     #           error Parser needs LIBDB of 2.x.x version to compile
-     #   endif
-     #else
-     #   error DB_VERSION_MAJOR not defined
-     #endif
- ; return 0; }
  EOF
- if { (eval echo configure:1423: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-   rm -rf conftest*
+     LIBMIME_SO_NAME=`cd $MIMELIB ; ls libgmime.?? libgmime.??? 2>/dev/null | grep -v \.la$ | sed 's/lib//' | sed 's/\..*//'`
+     if test -z "$GLIB_CONFIG"; then
+             GLIB_CONFIG=$MIMEBIN/glib-config
+             if test \! -x $GLIB_CONFIG; then
+                 GLIB_CONFIG=glib-config
+             fi
+     fi
+     GLIB_CFLAGS=`$GLIB_CONFIG --cflags`
+     GLIB_LIBS=`$GLIB_CONFIG --libs`
+     MIME_INCLUDES="$GLIB_CFLAGS -I$MIMEINC/gmime"
+     MIME_LIBS="$GLIB_LIBS -L$MIMELIB -l$LIBMIME_SO_NAME"
+     if test \! -z "$LD_PATHLINK"; then
+         MIME_LIBS="$MIME_LIBS -Wl,$LD_PATHLINK -Wl,$MIMELIB"
+     fi
+ fi
+ # Check whether --with-static-mailreceive or --without-static-mailreceive was given.
+ if test "${with_static_mailreceive+set}" = set; then
+   withval="$with_static_mailreceive"
-         echo "$ac_t""ok" 1>&6
+     GNOME_MIME=$withval
-         DB2=1
+     MIMEBIN="$GNOME_MIME/bin"
-         cat >> confdefs.h <<\EOF
+     MIMEINC="$GNOME_MIME/include"
- #define DB2
+     MIMELIB="$GNOME_MIME/lib"
+     if test \! -d $MIMEBIN -o \! -d $MIMEINC -o \! -d $MIMELIB; then
+         { echo "configure: error: $GNOME_MIME does not seem to be valid Gnome installation directory" 1>&2; exit 1; }
+     fi
+     cat >> confdefs.h <<\EOF
+ #define WITH_MAILRECEIVE
  EOF
-         DB2_INCLUDES="-I$DB2_INST/include"
-         DB2_LIBS="-L$DB2_INST/lib -ldb"
+     if test -z "$GLIB_CONFIG"; then
+             GLIB_CONFIG=$MIMEBIN/glib-config
- else
+             if test \! -x $GLIB_CONFIG; then
-   echo "configure: failed program was:" >&5
+                 GLIB_CONFIG=glib-config
-   cat conftest.$ac_ext >&5
+             fi
-   rm -rf conftest*
+     fi
-   { echo "configure: error: bad" 1>&2; exit 1; }
+     GLIB_CFLAGS=`$GLIB_CONFIG --cflags`
+     GLIB_DIR=`$GLIB_CONFIG --libs | sed 's/.*-L\([^ ]*\).*/\1/'`
+     GLIB_NAME=`$GLIB_CONFIG --libs | sed 's/.*-l\([^ ]*\).*/\1/'`
+     MIME_INCLUDES="$GLIB_CFLAGS -I$MIMEINC/gmime"
+     MIME_LIBS="$MIMELIB/libgmime.a $GLIB_DIR/lib$GLIB_NAME.a"
+ fi
+ # Check whether --with-sendmail or --without-sendmail was given.
+ if test "${with_sendmail+set}" = set; then
+   withval="$with_sendmail"
+   cat >> confdefs.h <<EOF
+ #define PA_FORCED_SENDMAIL "$withval"
+ EOF
  fi
- rm -f conftest*
+ # Check whether --with-apache13 or --without-apache13 was given.
+ if test "${with_apache13+set}" = set; then
+   withval="$with_apache13"
+   APACHE13=$withval
+     if test \! -f "$APACHE13/src/include/httpd.h"; then
+         { echo "configure: error: $APACHE13 does not seem to be valid Apache13 source distribution directory" 1>&2; exit 1; }
+     fi
  fi
+ if test -n "$APACHE13"; then
+   COMPILE_APACHE13_MODULE_TRUE=
+   COMPILE_APACHE13_MODULE_FALSE='#'
+ else
+   COMPILE_APACHE13_MODULE_TRUE='#'
+   COMPILE_APACHE13_MODULE_FALSE=
+ fi
  # Make sure we can run config.sub.
  if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
- Line 1452  else { echo "configure: error: can not r
+ Line 1745  else { echo "configure: error: can not r
  fi
  echo $ac_n "checking host system type""... $ac_c" 1>&6
- echo "configure:1456: checking host system type" >&5
+ echo "configure:1749: checking host system type" >&5
  host_alias=$host
  case "$host_alias" in
- Line 1486  echo "$ac_t""$host" 1>&6
+ Line 1779  echo "$ac_t""$host" 1>&6
  # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
  # ./install, which can be erroneously created by make from ./install.sh.
  echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
- echo "configure:1490: checking for a BSD compatible install" >&5
+ echo "configure:1783: checking for a BSD compatible install" >&5
  if test -z "$INSTALL"; then
  if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
- Line 1539  test -z "$INSTALL_SCRIPT" && INSTALL_SCR
+ Line 1832  test -z "$INSTALL_SCRIPT" && INSTALL_SCR
  test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
  echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
- echo "configure:1543: checking whether ${MAKE-make} sets \${MAKE}" >&5
+ echo "configure:1836: checking whether ${MAKE-make} sets \${MAKE}" >&5
  set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
  if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
- Line 1568  fi
+ Line 1861  fi
  # Extract the first word of "ranlib", so it can be a program name with args.
  set dummy ranlib; ac_word=$2
  echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
- echo "configure:1572: checking for $ac_word" >&5
+ echo "configure:1865: checking for $ac_word" >&5
  if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
- Line 1600  do
+ Line 1893  do
  # Extract the first word of "$ac_prog", so it can be a program name with args.
  set dummy $ac_prog; ac_word=$2
  echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
- echo "configure:1604: checking for $ac_word" >&5
+ echo "configure:1897: checking for $ac_word" >&5
  if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
- Line 1635  do
+ Line 1928  do
  # Extract the first word of "$ac_prog", so it can be a program name with args.
  set dummy $ac_prog; ac_word=$2
  echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
- echo "configure:1639: checking for $ac_word" >&5
+ echo "configure:1932: checking for $ac_word" >&5
  if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
- Line 1669  if test "$YACC" != "bison -y"; then
+ Line 1962  if test "$YACC" != "bison -y"; then
      echo "configure: warning: to regenerate Parser grammar YOU WOULD NEED BISON" 1>&2
  else
      echo $ac_n "checking bison version""... $ac_c" 1>&6
- echo "configure:1673: checking bison version" >&5
+ echo "configure:1966: checking bison version" >&5
      oldIFS=$IFS; IFS=.
      set `bison -V | sed -e 's/^GNU Bison version //'`
      IFS=$oldIFS
- Line 1679  echo "configure:1673: checking bison ver
+ Line 1972  echo "configure:1673: checking bison ver
      echo "$ac_t""$1.$2 (ok)" 1>&6
  fi
-   LIBLTDL='${top_builddir}/'src/libltdl/libltdlc.la
+   LIBLTDL='${top_builddir}/'src/lib/libltdl/libltdlc.a
-   INCLTDL='-I${top_srcdir}/'src/libltdl
+   INCLTDL='-I${top_srcdir}/'src/lib/libltdl
- # Check whether --enable-shared or --disable-shared was given.
+ subdirs="src/lib/libltdl"
- if test "${enable_shared+set}" = set; then
-   enableval="$enable_shared"
-   p=${PACKAGE-default}
- case "$enableval" in
- yes) enable_shared=yes ;;
- no) enable_shared=no ;;
- *)
-   enable_shared=no
-   # Look at the argument we got.  We use all the common list separators.
-   IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-   for pkg in $enableval; do
-     if test "X$pkg" = "X$p"; then
-       enable_shared=yes
-     fi
-   done
-   IFS="$ac_save_ifs"
-   ;;
- esac
- else
-   enable_shared=yes
- fi
- # Check whether --enable-static or --disable-static was given.
+ LIBADD_DL=
- if test "${enable_static+set}" = set; then
+ echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-   enableval="$enable_static"
+ echo "configure:1986: checking for dlopen in -ldl" >&5
-   p=${PACKAGE-default}
+ ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
- case "$enableval" in
+ if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- yes) enable_static=yes ;;
+   echo $ac_n "(cached) $ac_c" 1>&6
- no) enable_static=no ;;
- *)
-   enable_static=no
-   # Look at the argument we got.  We use all the common list separators.
-   IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-   for pkg in $enableval; do
-     if test "X$pkg" = "X$p"; then
-       enable_static=yes
-     fi
-   done
-   IFS="$ac_save_ifs"
-   ;;
- esac
  else
-   enable_static=yes
+   ac_save_LIBS="$LIBS"
- fi
+ LIBS="-ldl  $LIBS"
+ cat > conftest.$ac_ext <<EOF
+ #line 1994 "configure"
+ #include "confdefs.h"
+ /* Override any gcc2 internal prototype to avoid an error.  */
+ #ifdef __cplusplus
+ extern "C"
+ #endif
+ /* We use char because int might match the return type of a gcc2
+     builtin and then its argument prototype would still apply.  */
+ char dlopen();
- # Check whether --enable-fast-install or --disable-fast-install was given.
+ int main() {
- if test "${enable_fast_install+set}" = set; then
+ dlopen()
-   enableval="$enable_fast_install"
+ ; return 0; }
-   p=${PACKAGE-default}
+ EOF
- case "$enableval" in
+ if { (eval echo configure:2008: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- yes) enable_fast_install=yes ;;
+   rm -rf conftest*
- no) enable_fast_install=no ;;
+   eval "ac_cv_lib_$ac_lib_var=yes"
- *)
-   enable_fast_install=no
-   # Look at the argument we got.  We use all the common list separators.
-   IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-   for pkg in $enableval; do
-     if test "X$pkg" = "X$p"; then
-       enable_fast_install=yes
-     fi
-   done
-   IFS="$ac_save_ifs"
-   ;;
- esac
  else
-   enable_fast_install=yes
+   echo "configure: failed program was:" >&5
+   cat conftest.$ac_ext >&5
+   rm -rf conftest*
+   eval "ac_cv_lib_$ac_lib_var=no"
  fi
+ rm -f conftest*
+ LIBS="$ac_save_LIBS"
- echo $ac_n "checking build system type""... $ac_c" 1>&6
- echo "configure:1759: checking build system type" >&5
- build_alias=$build
- case "$build_alias" in
- NONE)
-   case $nonopt in
-   NONE) build_alias=$host_alias ;;
-   *) build_alias=$nonopt ;;
-   esac ;;
- esac
- build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
- build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
- build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
- build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
- echo "$ac_t""$build" 1>&6
- # Check whether --with-gnu-ld or --without-gnu-ld was given.
- if test "${with_gnu_ld+set}" = set; then
-   withval="$with_gnu_ld"
-   test "$withval" = no || with_gnu_ld=yes
- else
-   with_gnu_ld=no
- fi
- ac_prog=ld
- if test "$ac_cv_prog_gcc" = yes; then
-   # Check if gcc -print-prog-name=ld gives a path.
-   echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
- echo "configure:1788: checking for ld used by GCC" >&5
-   ac_prog=`($CC -print-prog-name=ld) 2>&5`
-   case "$ac_prog" in
-     # Accept absolute paths.
-     [\\/]* | [A-Za-z]:[\\/]*)
-       re_direlt='/[^/][^/]*/\.\./'
-       # Canonicalize the path of ld
-       ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-       while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-         ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-       done
-       test -z "$LD" && LD="$ac_prog"
-       ;;
-   "")
-     # If it fails, then pretend we aren't using GCC.
-     ac_prog=ld
-     ;;
-   *)
-     # If it is relative, then search for the first ld in PATH.
-     with_gnu_ld=unknown
-     ;;
-   esac
- elif test "$with_gnu_ld" = yes; then
-   echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
- echo "configure:1812: checking for GNU ld" >&5
- else
-   echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
- echo "configure:1815: checking for non-GNU ld" >&5
  fi
- if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
+ if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+   echo "$ac_t""yes" 1>&6
+   cat >> confdefs.h <<\EOF
+ #define HAVE_LIBDL 1
+ EOF
+  LIBADD_DL="-ldl"
+ else
+   echo "$ac_t""no" 1>&6
+ echo $ac_n "checking for dlopen""... $ac_c" 1>&6
+ echo "configure:2030: checking for dlopen" >&5
+ if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
-   if test -z "$LD"; then
+   cat > conftest.$ac_ext <<EOF
-   IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ #line 2035 "configure"
-   for ac_dir in $PATH; do
+ #include "confdefs.h"
-     test -z "$ac_dir" && ac_dir=.
+ /* System header to define __stub macros and hopefully few prototypes,
-     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+     which can conflict with char dlopen(); below.  */
-       ac_cv_path_LD="$ac_dir/$ac_prog"
+ #include <assert.h>
-       # Check to see if the program is GNU ld.  I'd rather use --version,
+ /* Override any gcc2 internal prototype to avoid an error.  */
-       # but apparently some GNU ld's only accept -v.
+ #ifdef __cplusplus
-       # Break only if it was the GNU/non-GNU ld that we prefer.
+ extern "C"
-       if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ #endif
-         test "$with_gnu_ld" != no && break
+ /* We use char because int might match the return type of a gcc2
-       else
+     builtin and then its argument prototype would still apply.  */
-         test "$with_gnu_ld" != yes && break
+ char dlopen();
-       fi
-     fi
+ int main() {
-   done
-   IFS="$ac_save_ifs"
+ /* The GNU C library defines this for functions which it implements
+     to always fail with ENOSYS.  Some functions are actually named
+     something starting with __ and the normal name is an alias.  */
+ #if defined (__stub_dlopen) || defined (__stub___dlopen)
+ choke me
+ #else
+ dlopen();
+ #endif
+ ; return 0; }
+ EOF
+ if { (eval echo configure:2061: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+   rm -rf conftest*
+   eval "ac_cv_func_dlopen=yes"
  else
-   ac_cv_path_LD="$LD" # Let the user override the test with a path.
+   echo "configure: failed program was:" >&5
+   cat conftest.$ac_ext >&5
+   rm -rf conftest*
+   eval "ac_cv_func_dlopen=no"
  fi
+ rm -f conftest*
  fi
- LD="$ac_cv_path_LD"
+ if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
- if test -n "$LD"; then
+   echo "$ac_t""yes" 1>&6
-   echo "$ac_t""$LD" 1>&6
+   cat >> confdefs.h <<\EOF
+ #define HAVE_LIBDL 1
+ EOF
  else
    echo "$ac_t""no" 1>&6
  fi
- test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
- echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
+ fi
- echo "configure:1850: checking if the linker ($LD) is GNU ld" >&5
- if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
+ echo $ac_n "checking for shl_load""... $ac_c" 1>&6
+ echo "configure:2086: checking for shl_load" >&5
+ if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
-   # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+   cat > conftest.$ac_ext <<EOF
- if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ #line 2091 "configure"
-   ac_cv_prog_gnu_ld=yes
+ #include "confdefs.h"
- else
+ /* System header to define __stub macros and hopefully few prototypes,
-   ac_cv_prog_gnu_ld=no
+     which can conflict with char shl_load(); below.  */
- fi
+ #include <assert.h>
- fi
+ /* Override any gcc2 internal prototype to avoid an error.  */
+ #ifdef __cplusplus
+ extern "C"
+ #endif
+ /* We use char because int might match the return type of a gcc2
+     builtin and then its argument prototype would still apply.  */
+ char shl_load();
- echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
+ int main() {
+ /* The GNU C library defines this for functions which it implements
+     to always fail with ENOSYS.  Some functions are actually named
+     something starting with __ and the normal name is an alias.  */
+ #if defined (__stub_shl_load) || defined (__stub___shl_load)
+ choke me
+ #else
+ shl_load();
+ #endif
- echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
+ ; return 0; }
- echo "configure:1866: checking for BSD-compatible nm" >&5
+ EOF
- if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
+ if { (eval echo configure:2117: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-   echo $ac_n "(cached) $ac_c" 1>&6
+   rm -rf conftest*
- else
+   eval "ac_cv_func_shl_load=yes"
-   if test -n "$NM"; then
-   # Let the user override the test.
-   ac_cv_path_NM="$NM"
  else
-   IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+   echo "configure: failed program was:" >&5
-   for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+   cat conftest.$ac_ext >&5
-     test -z "$ac_dir" && ac_dir=.
+   rm -rf conftest*
-     if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
+   eval "ac_cv_func_shl_load=no"
-       # Check to see if the nm accepts a BSD-compat flag.
-       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-       #   nm: unknown option "B" ignored
-       if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-         ac_cv_path_NM="$ac_dir/nm -B"
-         break
-       elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-         ac_cv_path_NM="$ac_dir/nm -p"
-         break
-       else
-         ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
-         continue # so that we can try to find one that supports BSD flags
-       fi
-     fi
-   done
-   IFS="$ac_save_ifs"
-   test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
  fi
+ rm -f conftest*
  fi
- NM="$ac_cv_path_NM"
+ if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
- echo "$ac_t""$NM" 1>&6
+   echo "$ac_t""yes" 1>&6
+   cat >> confdefs.h <<\EOF
+ #define HAVE_SHL_LOAD 1
+ EOF
- echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+ else
- echo "configure:1902: checking whether ln -s works" >&5
+   echo "$ac_t""no" 1>&6
- if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+ echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
+ echo "configure:2138: checking for shl_load in -ldld" >&5
+ ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
+ if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
-   rm -f conftestdata
+   ac_save_LIBS="$LIBS"
- if ln -s X conftestdata 2>/dev/null
+ LIBS="-ldld  $LIBS"
- then
+ cat > conftest.$ac_ext <<EOF
-   rm -f conftestdata
+ #line 2146 "configure"
-   ac_cv_prog_LN_S="ln -s"
+ #include "confdefs.h"
+ /* Override any gcc2 internal prototype to avoid an error.  */
+ #ifdef __cplusplus
+ extern "C"
+ #endif
+ /* We use char because int might match the return type of a gcc2
+     builtin and then its argument prototype would still apply.  */
+ char shl_load();
+ int main() {
+ shl_load()
+ ; return 0; }
+ EOF
+ if { (eval echo configure:2160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+   rm -rf conftest*
+   eval "ac_cv_lib_$ac_lib_var=yes"
  else
-   ac_cv_prog_LN_S=ln
+   echo "configure: failed program was:" >&5
+   cat conftest.$ac_ext >&5
+   rm -rf conftest*
+   eval "ac_cv_lib_$ac_lib_var=no"
  fi
+ rm -f conftest*
+ LIBS="$ac_save_LIBS"
  fi
- LN_S="$ac_cv_prog_LN_S"
+ if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- if test "$ac_cv_prog_LN_S" = "ln -s"; then
    echo "$ac_t""yes" 1>&6
+   cat >> confdefs.h <<\EOF
+ #define HAVE_SHL_LOAD 1
+ EOF
+  LIBADD_DL="$LIBADD_DL -ldld"
  else
    echo "$ac_t""no" 1>&6
  fi
+ fi
- case "$target" in
+ echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
- NONE) lt_target="$host" ;;
+ echo "configure:2186: checking for dld_link in -ldld" >&5
- *) lt_target="$target" ;;
+ ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
- esac
+ if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+   echo $ac_n "(cached) $ac_c" 1>&6
- # Check for any special flags to pass to ltconfig.
+ else
- libtool_flags="--cache-file=$cache_file"
+   ac_save_LIBS="$LIBS"
- test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+ LIBS="-ldld  $LIBS"
- test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+ cat > conftest.$ac_ext <<EOF
- test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+ #line 2194 "configure"
- test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+ #include "confdefs.h"
- test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ /* Override any gcc2 internal prototype to avoid an error.  */
+ #ifdef __cplusplus
+ extern "C"
+ #endif
+ /* We use char because int might match the return type of a gcc2
+     builtin and then its argument prototype would still apply.  */
+ char dld_link();
+ int main() {
+ dld_link()
+ ; return 0; }
+ EOF
+ if { (eval echo configure:2208: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+   rm -rf conftest*
+   eval "ac_cv_lib_$ac_lib_var=yes"
+ else
+   echo "configure: failed program was:" >&5
+   cat conftest.$ac_ext >&5
+   rm -rf conftest*
+   eval "ac_cv_lib_$ac_lib_var=no"
+ fi
+ rm -f conftest*
+ LIBS="$ac_save_LIBS"
- # Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+ fi
- if test "${enable_libtool_lock+set}" = set; then
+ if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-   enableval="$enable_libtool_lock"
+   echo "$ac_t""yes" 1>&6
-   :
+   cat >> confdefs.h <<\EOF
+ #define HAVE_DLD 1
+ EOF
+ test "x$ac_cv_lib_dld_shl_load" = yes || LIBADD_DL="$LIBADD_DL -ldld"
+ else
+   echo "$ac_t""no" 1>&6
  fi
- test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
- test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
- # Some flags need to be propagated to the compiler or linker for good
- # libtool support.
- case "$lt_target" in
- *-*-irix6*)
-   # Find out which ABI we are using.
-   echo '#line 1951 "configure"' > conftest.$ac_ext
-   if { (eval echo configure:1952: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-     case "`/usr/bin/file conftest.o`" in
-     *32-bit*)
-       LD="${LD-ld} -32"
-       ;;
-     *N32*)
-       LD="${LD-ld} -n32"
-       ;;
-     *64-bit*)
-       LD="${LD-ld} -64"
-       ;;
-     esac
-   fi
-   rm -rf conftest*
-   ;;
- *-*-sco3.2v5*)
+ if test "x$ac_cv_func_dlopen" = xyes || test "x$ac_cv_lib_dl_dlopen" = xyes; then
-   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  LIBS_SAVE="$LIBS"
-   SAVE_CFLAGS="$CFLAGS"
+  LIBS="$LIBS $LIBADD_DL"
-   CFLAGS="$CFLAGS -belf"
+  for ac_func in dlerror
-   echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
+ do
- echo "configure:1973: checking whether the C compiler needs -belf" >&5
+ echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
- if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
+ echo "configure:2239: checking for $ac_func" >&5
+ if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
    cat > conftest.$ac_ext <<EOF
- #line 1978 "configure"
+ #line 2244 "configure"
  #include "confdefs.h"
+ /* System header to define __stub macros and hopefully few prototypes,
+     which can conflict with char $ac_func(); below.  */
+ #include <assert.h>
+ /* Override any gcc2 internal prototype to avoid an error.  */
+ #ifdef __cplusplus
+ extern "C"
+ #endif
+ /* We use char because int might match the return type of a gcc2
+     builtin and then its argument prototype would still apply.  */
+ char $ac_func();
  int main() {
+ /* The GNU C library defines this for functions which it implements
+     to always fail with ENOSYS.  Some functions are actually named
+     something starting with __ and the normal name is an alias.  */
+ #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+ choke me
+ #else
+ $ac_func();
+ #endif
  ; return 0; }
  EOF
- if { (eval echo configure:1985: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ if { (eval echo configure:2270: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
    rm -rf conftest*
-   lt_cv_cc_needs_belf=yes
+   eval "ac_cv_func_$ac_func=yes"
  else
    echo "configure: failed program was:" >&5
    cat conftest.$ac_ext >&5
    rm -rf conftest*
-   lt_cv_cc_needs_belf=no
+   eval "ac_cv_func_$ac_func=no"
  fi
  rm -f conftest*
  fi
- echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
+ if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-   if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+   echo "$ac_t""yes" 1>&6
-     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+     ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-     CFLAGS="$SAVE_CFLAGS"
+   cat >> confdefs.h <<EOF
-   fi
+ #define $ac_tr_func 1
-   ;;
- esac
- # Save cache, so that ltconfig can load it
- cat > confcache <<\EOF
- # This file is a shell script that caches the results of configure
- # tests run on this system so they can be shared between configure
- # scripts and configure runs.  It is not useful on other systems.
- # If it contains results you don't want to keep, you may remove or edit it.
- #
- # By default, configure uses ./config.cache as the cache file,
- # creating it if it does not exist already.  You can give configure
- # the --cache-file=FILE option to use a different cache file; that is
- # what configure does when it calls configure scripts in
- # subdirectories, so they share the cache.
- # Giving --cache-file=/dev/null disables caching, for debugging configure.
- # config.status only pays attention to the cache file if you give it the
- # --recheck option to rerun configure.
- #
  EOF
- # The following way of writing the cache mishandles newlines in values,
- # but we know of no workaround that is simple, portable, and efficient.
- # So, don't put newlines in cache variables' values.
- # Ultrix sh set writes to stderr and can't be redirected directly,
- # and sets the high bit in the cache file unless we assign to the vars.
- (set) 2>&1 |
-   case `(ac_space=' '; set | grep ac_space) 2>&1` in
-   *ac_space=\ *)
-     # `set' does not quote correctly, so add quotes (double-quote substitution
-     # turns \\\\ into \\, and sed turns \\ into \).
-     sed -n \
-       -e "s/'/'\\\\''/g" \
-       -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-     ;;
-   *)
-     # `set' quotes correctly as required by POSIX, so do not add quotes.
-     sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-     ;;
-   esac >> confcache
- if cmp -s $cache_file confcache; then
-   :
  else
-   if test -w $cache_file; then
+   echo "$ac_t""no" 1>&6
-     echo "updating cache $cache_file"
-     cat confcache > $cache_file
-   else
-     echo "not updating unwritable cache $cache_file"
-   fi
  fi
- rm -f confcache
+ done
- # Actually configure libtool.  ac_aux_dir is where install-sh is found.
- CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
- LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
- LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
- DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
- ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
- $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
- || { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
- # Reload cache, that may have been modified by ltconfig
+  LIBS="$LIBS_SAVE"
- if test -r "$cache_file"; then
-   echo "loading cache $cache_file"
-   . $cache_file
- else
-   echo "creating cache $cache_file"
-   > $cache_file
  fi
- # This can be used to rebuild libtool when needed
- LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
- # Always use our own libtool.
- LIBTOOL='$(SHELL) $(top_builddir)/libtool'
- # Redirect the config.log output again, so that the ltconfig log is not
- # clobbered by the next message.
- exec 5>>./config.log
- subdirs="src/libltdl"
  echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
- echo "configure:2093: checking how to run the C++ preprocessor" >&5
+ echo "configure:2299: checking how to run the C++ preprocessor" >&5
  if test -z "$CXXCPP"; then
  if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
- Line 2102  ac_link='${CXX-g++} -o conftest${ac_exee
+ Line 2308  ac_link='${CXX-g++} -o conftest${ac_exee
  cross_compiling=$ac_cv_prog_cxx_cross
    CXXCPP="${CXX-g++} -E"
    cat > conftest.$ac_ext <<EOF
- #line 2106 "configure"
+ #line 2312 "configure"
  #include "confdefs.h"
  #include <stdlib.h>
  EOF
  ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
- { (eval echo configure:2111: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ { (eval echo configure:2317: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
  ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
  if test -z "$ac_err"; then
    :
- Line 2132  CXXCPP="$ac_cv_prog_CXXCPP"
+ Line 2338  CXXCPP="$ac_cv_prog_CXXCPP"
  echo "$ac_t""$CXXCPP" 1>&6
  echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
- echo "configure:2136: checking for ANSI C header files" >&5
+ echo "configure:2342: checking for ANSI C header files" >&5
  if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
    cat > conftest.$ac_ext <<EOF
- #line 2141 "configure"
+ #line 2347 "configure"
  #include "confdefs.h"
  #include <stdlib.h>
  #include <stdarg.h>
- Line 2145  else
+ Line 2351  else
  #include <float.h>
  EOF
  ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
- { (eval echo configure:2149: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ { (eval echo configure:2355: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
  ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
  if test -z "$ac_err"; then
    rm -rf conftest*
- Line 2162  rm -f conftest*
+ Line 2368  rm -f conftest*
  if test $ac_cv_header_stdc = yes; then
    # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
  cat > conftest.$ac_ext <<EOF
- #line 2166 "configure"
+ #line 2372 "configure"
  #include "confdefs.h"
  #include <string.h>
  EOF
- Line 2180  fi
+ Line 2386  fi
  if test $ac_cv_header_stdc = yes; then
    # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
  cat > conftest.$ac_ext <<EOF
- #line 2184 "configure"
+ #line 2390 "configure"
  #include "confdefs.h"
  #include <stdlib.h>
  EOF
- Line 2201  if test "$cross_compiling" = yes; then
+ Line 2407  if test "$cross_compiling" = yes; then
    :
  else
    cat > conftest.$ac_ext <<EOF
- #line 2205 "configure"
+ #line 2411 "configure"
  #include "confdefs.h"
  #ifdef __cplusplus
  extern "C" void exit(int);
- Line 2215  if (XOR (islower (i), ISLOWER (i)) || to
+ Line 2421  if (XOR (islower (i), ISLOWER (i)) || to
  exit (0); }
  EOF
- if { (eval echo configure:2219: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+ if { (eval echo configure:2425: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
  then
    :
  else
- Line 2239  EOF
+ Line 2445  EOF
  fi
  echo $ac_n "checking for size_t""... $ac_c" 1>&6
- echo "configure:2243: checking for size_t" >&5
+ echo "configure:2449: checking for size_t" >&5
  if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
    cat > conftest.$ac_ext <<EOF
- #line 2248 "configure"
+ #line 2454 "configure"
  #include "confdefs.h"
  #include <sys/types.h>
  #if STDC_HEADERS
- Line 2271  EOF
+ Line 2477  EOF
  fi
+ echo $ac_n "checking for off_t""... $ac_c" 1>&6
+ echo "configure:2482: checking for off_t" >&5
+ if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
+   echo $ac_n "(cached) $ac_c" 1>&6
+ else
+   cat > conftest.$ac_ext <<EOF
+ #line 2487 "configure"
+ #include "confdefs.h"
+ #include <sys/types.h>
+ #if STDC_HEADERS
+ #include <stdlib.h>
+ #include <stddef.h>
+ #endif
+ EOF
+ if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+   egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+   rm -rf conftest*
+   ac_cv_type_off_t=yes
+ else
+   rm -rf conftest*
+   ac_cv_type_off_t=no
+ fi
+ rm -f conftest*
+ fi
+ echo "$ac_t""$ac_cv_type_off_t" 1>&6
+ if test $ac_cv_type_off_t = no; then
+   cat >> confdefs.h <<\EOF
+ #define off_t long
+ EOF
+ fi
+ echo $ac_n "checking for ssize_t""... $ac_c" 1>&6
+ echo "configure:2515: checking for ssize_t" >&5
+ if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then
+   echo $ac_n "(cached) $ac_c" 1>&6
+ else
+   cat > conftest.$ac_ext <<EOF
+ #line 2520 "configure"
+ #include "confdefs.h"
+ #include <sys/types.h>
+ #if STDC_HEADERS
+ #include <stdlib.h>
+ #include <stddef.h>
+ #endif
+ EOF
+ if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+   egrep "(^|[^a-zA-Z_0-9])ssize_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+   rm -rf conftest*
+   ac_cv_type_ssize_t=yes
+ else
+   rm -rf conftest*
+   ac_cv_type_ssize_t=no
+ fi
+ rm -f conftest*
+ fi
+ echo "$ac_t""$ac_cv_type_ssize_t" 1>&6
+ if test $ac_cv_type_ssize_t = no; then
+   cat >> confdefs.h <<\EOF
+ #define ssize_t int
+ EOF
+ fi
+ echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
+ echo "configure:2551: checking whether time.h and sys/time.h may both be included" >&5
+ if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
+   echo $ac_n "(cached) $ac_c" 1>&6
+ else
+   cat > conftest.$ac_ext <<EOF
+ #line 2556 "configure"
+ #include "confdefs.h"
+ #include <sys/types.h>
+ #include <sys/time.h>
+ #include <time.h>
+ int main() {
+ struct tm *tp;
+ ; return 0; }
+ EOF
+ if { (eval echo configure:2565: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+   rm -rf conftest*
+   ac_cv_header_time=yes
+ else
+   echo "configure: failed program was:" >&5
+   cat conftest.$ac_ext >&5
+   rm -rf conftest*
+   ac_cv_header_time=no
+ fi
+ rm -f conftest*
+ fi
+ echo "$ac_t""$ac_cv_header_time" 1>&6
+ if test $ac_cv_header_time = yes; then
+   cat >> confdefs.h <<\EOF
+ #define TIME_WITH_SYS_TIME 1
+ EOF
+ fi
  for ac_hdr in unistd.h \
- Line 2284  stdio.h \
+ Line 2593  stdio.h \
  errno.h \
  ctype.h \
  math.h \
+ crypt.h \
  time.h sys/time.h \
  stdlib.h \
  string.h \
- Line 2300  sys/resource.h
+ Line 2610  sys/resource.h
  do
  ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
  echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
- echo "configure:2304: checking for $ac_hdr" >&5
+ echo "configure:2614: checking for $ac_hdr" >&5
  if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
    cat > conftest.$ac_ext <<EOF
- #line 2309 "configure"
+ #line 2619 "configure"
  #include "confdefs.h"
  #include <$ac_hdr>
  EOF
  ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
- { (eval echo configure:2314: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ { (eval echo configure:2624: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
  ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
  if test -z "$ac_err"; then
    rm -rf conftest*
- Line 2341  done
+ Line 2651  done
  case "$host" in
    *-sunos5.6* | *-solaris2.6*)
        echo $ac_n "checking for main in -lxnet""... $ac_c" 1>&6
- echo "configure:2345: checking for main in -lxnet" >&5
+ echo "configure:2655: checking for main in -lxnet" >&5
  ac_lib_var=`echo xnet'_'main | sed 'y%./+-%__p_%'`
  if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
- Line 2349  else
+ Line 2659  else
    ac_save_LIBS="$LIBS"
  LIBS="-lxnet  $LIBS"
  cat > conftest.$ac_ext <<EOF
- #line 2353 "configure"
+ #line 2663 "configure"
  #include "confdefs.h"
  int main() {
  main()
  ; return 0; }
  EOF
- if { (eval echo configure:2360: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ if { (eval echo configure:2670: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
    rm -rf conftest*
    eval "ac_cv_lib_$ac_lib_var=yes"
  else
- Line 2386  fi
+ Line 2696  fi
    ;;
    *-sunos5* | *-solaris2*)
        echo $ac_n "checking for main in -lsocket""... $ac_c" 1>&6
- echo "configure:2390: checking for main in -lsocket" >&5
+ echo "configure:2700: checking for main in -lsocket" >&5
  ac_lib_var=`echo socket'_'main | sed 'y%./+-%__p_%'`
  if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
- Line 2394  else
+ Line 2704  else
    ac_save_LIBS="$LIBS"
  LIBS="-lsocket  $LIBS"
  cat > conftest.$ac_ext <<EOF
- #line 2398 "configure"
+ #line 2708 "configure"
  #include "confdefs.h"
  int main() {
  main()
  ; return 0; }
  EOF
- if { (eval echo configure:2405: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ if { (eval echo configure:2715: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
    rm -rf conftest*
    eval "ac_cv_lib_$ac_lib_var=yes"
  else
- Line 2429  else
+ Line 2739  else
  fi
        echo $ac_n "checking for main in -lnsl""... $ac_c" 1>&6
- echo "configure:2433: checking for main in -lnsl" >&5
+ echo "configure:2743: checking for main in -lnsl" >&5
  ac_lib_var=`echo nsl'_'main | sed 'y%./+-%__p_%'`
  if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
- Line 2437  else
+ Line 2747  else
    ac_save_LIBS="$LIBS"
  LIBS="-lnsl  $LIBS"
  cat > conftest.$ac_ext <<EOF
- #line 2441 "configure"
+ #line 2751 "configure"
  #include "confdefs.h"
  int main() {
  main()
  ; return 0; }
  EOF
- if { (eval echo configure:2448: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ if { (eval echo configure:2758: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
    rm -rf conftest*
    eval "ac_cv_lib_$ac_lib_var=yes"
  else
- Line 2474  fi
+ Line 2784  fi
    ;;
    *-nec-sysv4*)
        echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
- echo "configure:2478: checking for gethostbyname in -lnsl" >&5
+ echo "configure:2788: checking for gethostbyname in -lnsl" >&5
  ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
  if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
- Line 2482  else
+ Line 2792  else
    ac_save_LIBS="$LIBS"
  LIBS="-lnsl  $LIBS"
  cat > conftest.$ac_ext <<EOF
- #line 2486 "configure"
+ #line 2796 "configure"
  #include "confdefs.h"
  /* Override any gcc2 internal prototype to avoid an error.  */
  #ifdef __cplusplus
- Line 2496  int main() {
+ Line 2806  int main() {
  gethostbyname()
  ; return 0; }
  EOF
- if { (eval echo configure:2500: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ if { (eval echo configure:2810: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
    rm -rf conftest*
    eval "ac_cv_lib_$ac_lib_var=yes"
  else
- Line 2524  else
+ Line 2834  else
  fi
        echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6
- echo "configure:2528: checking for socket in -lsocket" >&5
+ echo "configure:2838: checking for socket in -lsocket" >&5
  ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'`
  if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
- Line 2532  else
+ Line 2842  else
    ac_save_LIBS="$LIBS"
  LIBS="-lsocket  $LIBS"
  cat > conftest.$ac_ext <<EOF
- #line 2536 "configure"
+ #line 2846 "configure"
  #include "confdefs.h"
  /* Override any gcc2 internal prototype to avoid an error.  */
  #ifdef __cplusplus
- Line 2546  int main() {
+ Line 2856  int main() {
  socket()
  ; return 0; }
  EOF
- if { (eval echo configure:2550: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ if { (eval echo configure:2860: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
    rm -rf conftest*
    eval "ac_cv_lib_$ac_lib_var=yes"
  else
- Line 2580  fi
+ Line 2890  fi
  EOF
        echo $ac_n "checking for socket in -lwsock32""... $ac_c" 1>&6
- echo "configure:2584: checking for socket in -lwsock32" >&5
+ echo "configure:2894: checking for socket in -lwsock32" >&5
  ac_lib_var=`echo wsock32'_'socket | sed 'y%./+-%__p_%'`
  if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
- Line 2588  else
+ Line 2898  else
    ac_save_LIBS="$LIBS"
  LIBS="-lwsock32  $LIBS"
  cat > conftest.$ac_ext <<EOF
- #line 2592 "configure"
+ #line 2902 "configure"
  #include "confdefs.h"
  /* Override any gcc2 internal prototype to avoid an error.  */
  #ifdef __cplusplus
- Line 2602  int main() {
+ Line 2912  int main() {
  socket()
  ; return 0; }
  EOF
- if { (eval echo configure:2606: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ if { (eval echo configure:2916: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
    rm -rf conftest*
    eval "ac_cv_lib_$ac_lib_var=yes"
  else
- Line 2630  else
+ Line 2940  else
  fi
    ;;
+ # never tested this, only theoretically by letter from demos about parser2 build
+   *-hpux*)
+       echo $ac_n "checking for main in -lnsl""... $ac_c" 1>&6
+ echo "configure:2947: checking for main in -lnsl" >&5
+ ac_lib_var=`echo nsl'_'main | sed 'y%./+-%__p_%'`
+ if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+   echo $ac_n "(cached) $ac_c" 1>&6
+ else
+   ac_save_LIBS="$LIBS"
+ LIBS="-lnsl  $LIBS"
+ cat > conftest.$ac_ext <<EOF
+ #line 2955 "configure"
+ #include "confdefs.h"
+ int main() {
+ main()
+ ; return 0; }
+ EOF
+ if { (eval echo configure:2962: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+   rm -rf conftest*
+   eval "ac_cv_lib_$ac_lib_var=yes"
+ else
+   echo "configure: failed program was:" >&5
+   cat conftest.$ac_ext >&5
+   rm -rf conftest*
+   eval "ac_cv_lib_$ac_lib_var=no"
+ fi
+ rm -f conftest*
+ LIBS="$ac_save_LIBS"
+ fi
+ if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+   echo "$ac_t""yes" 1>&6
+     ac_tr_lib=HAVE_LIB`echo nsl | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+     -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+   cat >> confdefs.h <<EOF
+ #define $ac_tr_lib 1
+ EOF
+   LIBS="-lnsl $LIBS"
+ else
+   echo "$ac_t""no" 1>&6
+ fi
+   ;;
  esac
  echo $ac_n "checking for sin in -lm""... $ac_c" 1>&6
- echo "configure:2637: checking for sin in -lm" >&5
+ echo "configure:2993: checking for sin in -lm" >&5
  ac_lib_var=`echo m'_'sin | sed 'y%./+-%__p_%'`
  if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
- Line 2641  else
+ Line 2997  else
    ac_save_LIBS="$LIBS"
  LIBS="-lm  $LIBS"
  cat > conftest.$ac_ext <<EOF
- #line 2645 "configure"
+ #line 3001 "configure"
  #include "confdefs.h"
  /* Override any gcc2 internal prototype to avoid an error.  */
  #ifdef __cplusplus
- Line 2655  int main() {
+ Line 3011  int main() {
  sin()
  ; return 0; }
  EOF
- if { (eval echo configure:2659: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ if { (eval echo configure:3015: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
    rm -rf conftest*
    eval "ac_cv_lib_$ac_lib_var=yes"
  else
- Line 2683  else
+ Line 3039  else
  fi
+ echo $ac_n "checking for crypt in -lcrypt""... $ac_c" 1>&6
+ echo "configure:3044: checking for crypt in -lcrypt" >&5
+ ac_lib_var=`echo crypt'_'crypt | sed 'y%./+-%__p_%'`
+ if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+   echo $ac_n "(cached) $ac_c" 1>&6
+ else
+   ac_save_LIBS="$LIBS"
+ LIBS="-lcrypt  $LIBS"
+ cat > conftest.$ac_ext <<EOF
+ #line 3052 "configure"
+ #include "confdefs.h"
+ /* Override any gcc2 internal prototype to avoid an error.  */
+ #ifdef __cplusplus
+ extern "C"
+ #endif
+ /* We use char because int might match the return type of a gcc2
+     builtin and then its argument prototype would still apply.  */
+ char crypt();
+ int main() {
+ crypt()
+ ; return 0; }
+ EOF
+ if { (eval echo configure:3066: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+   rm -rf conftest*
+   eval "ac_cv_lib_$ac_lib_var=yes"
+ else
+   echo "configure: failed program was:" >&5
+   cat conftest.$ac_ext >&5
+   rm -rf conftest*
+   eval "ac_cv_lib_$ac_lib_var=no"
+ fi
+ rm -f conftest*
+ LIBS="$ac_save_LIBS"
+ fi
+ if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+   echo "$ac_t""yes" 1>&6
+     ac_tr_lib=HAVE_LIB`echo crypt | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+     -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+   cat >> confdefs.h <<EOF
+ #define $ac_tr_lib 1
+ EOF
+   LIBS="-lcrypt $LIBS"
+ else
+   echo "$ac_t""no" 1>&6
+ fi
  for ac_func in trunc \
  round \
  sign \
  flock \
  _locking \
+ fcntl \
  lockf \
- getrusage
+ getrusage \
+ crypt
  do
  echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
- echo "configure:2698: checking for $ac_func" >&5
+ echo "configure:3107: checking for $ac_func" >&5
  if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
    cat > conftest.$ac_ext <<EOF
- #line 2703 "configure"
+ #line 3112 "configure"
  #include "confdefs.h"
  /* System header to define __stub macros and hopefully few prototypes,
      which can conflict with char $ac_func(); below.  */
- Line 2725  $ac_func();
+ Line 3134  $ac_func();
  ; return 0; }
  EOF
- if { (eval echo configure:2729: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ if { (eval echo configure:3138: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
    rm -rf conftest*
    eval "ac_cv_func_$ac_func=yes"
  else
- Line 2754  done
+ Line 3163  done
  for ac_func in qsort
  do
  echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
- echo "configure:2758: checking for $ac_func" >&5
+ echo "configure:3167: checking for $ac_func" >&5
  if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
    cat > conftest.$ac_ext <<EOF
- #line 2763 "configure"
+ #line 3172 "configure"
  #include "confdefs.h"
  /* System header to define __stub macros and hopefully few prototypes,
      which can conflict with char $ac_func(); below.  */
- Line 2785  $ac_func();
+ Line 3194  $ac_func();
  ; return 0; }
  EOF
- if { (eval echo configure:2789: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ if { (eval echo configure:3198: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
    rm -rf conftest*
    eval "ac_cv_func_$ac_func=yes"
  else
- Line 2813  done
+ Line 3222  done
  for ac_func in select
  do
  echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
- echo "configure:2817: checking for $ac_func" >&5
+ echo "configure:3226: checking for $ac_func" >&5
  if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
    echo $ac_n "(cached) $ac_c" 1>&6
  else
    cat > conftest.$ac_ext <<EOF
- #line 2822 "configure"
+ #line 3231 "configure"
  #include "confdefs.h"
  /* System header to define __stub macros and hopefully few prototypes,
      which can conflict with char $ac_func(); below.  */
- Line 2844  $ac_func();
+ Line 3253  $ac_func();
  ; return 0; }
  EOF
- if { (eval echo configure:2848: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ if { (eval echo configure:3257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
    rm -rf conftest*
    eval "ac_cv_func_$ac_func=yes"
  else
- Line 2871  done
+ Line 3280  done
  echo $ac_n "checking whether compiler supports pragma pack""... $ac_c" 1>&6
- echo "configure:2875: checking whether compiler supports pragma pack" >&5
+ echo "configure:3284: checking whether compiler supports pragma pack" >&5
  cat > conftest.$ac_ext <<EOF
- #line 2877 "configure"
+ #line 3286 "configure"
  #include "confdefs.h"
- int main() {
  #pragma pack(1)
- struct must_be_1_byte {
+ struct _1_byte {
          char c;
  };
  #pragma pack()
- if(sizeof(must_be_1_byte)!=1)
-         return 1;
+ int main() {
  ; return 0; }
  EOF
- if { (eval echo configure:2891: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ if { (eval echo configure:3298: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
    rm -rf conftest*
      echo "$ac_t""yes" 1>&6
- Line 2906  fi
+ Line 3313  fi
  rm -f conftest*
  echo $ac_n "checking for set_new_handler""... $ac_c" 1>&6
- echo "configure:2910: checking for set_new_handler" >&5
+ echo "configure:3317: checking for set_new_handler" >&5
  cat > conftest.$ac_ext <<EOF
- #line 2912 "configure"
+ #line 3319 "configure"
  #include "confdefs.h"
  #ifdef HAVE_NEW
  #include <new>
- Line 2920  std::set_new_handler(failed_new);
+ Line 3327  std::set_new_handler(failed_new);
  ; return 0; }
  EOF
- if { (eval echo configure:2924: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ if { (eval echo configure:3331: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
    rm -rf conftest*
      echo "$ac_t""yes" 1>&6
- Line 2940  rm -f conftest*
+ Line 3347  rm -f conftest*
- APACHE_LIBS=$LIBS
- echo $ac_n "checking for __builtin_new in -lstdc++""... $ac_c" 1>&6
- echo "configure:2946: checking for __builtin_new in -lstdc++" >&5
- ac_lib_var=`echo stdc++'_'__builtin_new | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
-   echo $ac_n "(cached) $ac_c" 1>&6
- else
-   ac_save_LIBS="$LIBS"
- LIBS="-lstdc++  $LIBS"
- cat > conftest.$ac_ext <<EOF
- #line 2954 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error.  */
- #ifdef __cplusplus
- extern "C"
- #endif
- /* We use char because int might match the return type of a gcc2
-     builtin and then its argument prototype would still apply.  */
- char __builtin_new();
- int main() {
- __builtin_new()
- ; return 0; }
- EOF
- if { (eval echo configure:2968: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-   rm -rf conftest*
-   eval "ac_cv_lib_$ac_lib_var=yes"
- else
-   echo "configure: failed program was:" >&5
-   cat conftest.$ac_ext >&5
-   rm -rf conftest*
-   eval "ac_cv_lib_$ac_lib_var=no"
- fi
- rm -f conftest*
- LIBS="$ac_save_LIBS"
- fi
- if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
-   echo "$ac_t""yes" 1>&6
-   APACHE_LIBS="$APACHE_LIBS -lstdc++"
- else
-   echo "$ac_t""no" 1>&6
- fi
+ APACHE_LIBS="$LIBS $LIBADD_DL"
- Line 2997  e_sysconfdir=$sysconfdir
+ Line 3361  e_sysconfdir=$sysconfdir
  test "$e_sysconfdir" = "\${prefix}/etc" && e_sysconfdir="${e_prefix}/etc"
- rootconfigdir=$e_sysconfdir
  charsetsdir=$e_sysconfdir/parser3.charsets
- Line 3010  if test "$e_libdir" = "\${exec_prefix}/l
+ Line 3370  if test "$e_libdir" = "\${exec_prefix}/l
      # Let make expand exec_prefix.
      e_exec_prefix=$exec_prefix
-     test "x$e_exec_prefix" = xNONE && e_exec_prefix=$prefix
+     test "x$e_exec_prefix" = xNONE && e_exec_prefix=$e_prefix
      # expand apostrophed
      test "$e_libdir" = "\${exec_prefix}/lib" && e_libdir="${e_exec_prefix}/lib"
- Line 3125  done
+ Line 3485  done
  ac_given_srcdir=$srcdir
  ac_given_INSTALL="$INSTALL"
- trap 'rm -fr `echo "Makefile src/Makefile src/libltdl/Makefile src/types/Makefile src/classes/Makefile src/classes/gd/Makefile src/main/Makefile src/pcre/Makefile src/targets/Makefile src/targets/cgi/pa_config_paths.h src/targets/cgi/Makefile src/targets/apache13/Makefile src/targets/apache13/p3runConfigure etc/parser3.charsets/Makefile etc/parser3.conf etc/Makefile src/include/pa_config_auto.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+ trap 'rm -fr `echo "Makefile src/Makefile src/types/Makefile src/classes/Makefile src/classes/gd/Makefile src/classes/smtp/Makefile src/include/Makefile src/main/Makefile src/sql/Makefile src/lib/Makefile src/lib/libltdl/Makefile src/lib/pcre/Makefile src/lib/md5/Makefile src/lib/patches/Makefile src/targets/Makefile src/targets/cgi/Makefile src/targets/apache13/Makefile src/targets/apache13/hook/Makefile src/targets/apache13/p3runConfigure src/targets/isapi/Makefile etc/Makefile etc/parser3.charsets/Makefile bin/Makefile bin/auto.p.dist src/include/pa_config_auto.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
  EOF
  cat >> $CONFIG_STATUS <<EOF
- Line 3171  s%@SET_MAKE@%$SET_MAKE%g
+ Line 3531  s%@SET_MAKE@%$SET_MAKE%g
  s%@P3S@%$P3S%g
  s%@CC@%$CC%g
  s%@CXX@%$CXX%g
+ s%@DO_NOT_LINK_LIBSTDCPP_TRUE@%$DO_NOT_LINK_LIBSTDCPP_TRUE%g
+ s%@DO_NOT_LINK_LIBSTDCPP_FALSE@%$DO_NOT_LINK_LIBSTDCPP_FALSE%g
+ s%@commentcharset_windows1251@%$commentcharset_windows1251%g
+ s%@commentcharset_windows1250@%$commentcharset_windows1250%g
+ s%@commentcharset_windows1257@%$commentcharset_windows1257%g
+ s%@commentcharset_koi8r@%$commentcharset_koi8r%g
+ s%@mysql_client@%$mysql_client%g
+ s%@pgsql_client@%$pgsql_client%g
+ s%@oracle_client@%$oracle_client%g
+ s%@XML_INCLUDES@%$XML_INCLUDES%g
+ s%@XML_LIBS@%$XML_LIBS%g
+ s%@MIME_INCLUDES@%$MIME_INCLUDES%g
+ s%@MIME_LIBS@%$MIME_LIBS%g
  s%@APACHE13@%$APACHE13%g
  s%@COMPILE_APACHE13_MODULE_TRUE@%$COMPILE_APACHE13_MODULE_TRUE%g
  s%@COMPILE_APACHE13_MODULE_FALSE@%$COMPILE_APACHE13_MODULE_FALSE%g
- s%@XML_INCLUDES@%$XML_INCLUDES%g
- s%@XML_LIBS@%$XML_LIBS%g
- s%@DB2_INCLUDES@%$DB2_INCLUDES%g
- s%@DB2_LIBS@%$DB2_LIBS%g
  s%@host@%$host%g
  s%@host_alias@%$host_alias%g
  s%@host_cpu@%$host_cpu%g
- Line 3188  s%@AWK@%$AWK%g
+ Line 3557  s%@AWK@%$AWK%g
  s%@YACC@%$YACC%g
  s%@INCLTDL@%$INCLTDL%g
  s%@LIBLTDL@%$LIBLTDL%g
- s%@LIBADD_DL@%$LIBADD_DL%g
- s%@build@%$build%g
- s%@build_alias@%$build_alias%g
- s%@build_cpu@%$build_cpu%g
- s%@build_vendor@%$build_vendor%g
- s%@build_os@%$build_os%g
- s%@LN_S@%$LN_S%g
- s%@LIBTOOL@%$LIBTOOL%g
- s%@LIBTOOL_DEPS@%$LIBTOOL_DEPS%g
  s%@subdirs@%$subdirs%g
+ s%@LIBADD_DL@%$LIBADD_DL%g
  s%@CXXCPP@%$CXXCPP%g
  s%@APACHE_LIBS@%$APACHE_LIBS%g
- s%@rootconfigdir@%$rootconfigdir%g
  s%@charsetsdir@%$charsetsdir%g
  s%@sqldriversdir@%$sqldriversdir%g
- Line 3244  EOF
+ Line 3604  EOF
  cat >> $CONFIG_STATUS <<EOF
- CONFIG_FILES=\${CONFIG_FILES-"Makefile src/Makefile src/libltdl/Makefile src/types/Makefile src/classes/Makefile src/classes/gd/Makefile src/main/Makefile src/pcre/Makefile src/targets/Makefile src/targets/cgi/pa_config_paths.h src/targets/cgi/Makefile src/targets/apache13/Makefile src/targets/apache13/p3runConfigure etc/parser3.charsets/Makefile etc/parser3.conf etc/Makefile"}
+ CONFIG_FILES=\${CONFIG_FILES-"Makefile src/Makefile src/types/Makefile src/classes/Makefile src/classes/gd/Makefile src/classes/smtp/Makefile src/include/Makefile src/main/Makefile src/sql/Makefile src/lib/Makefile src/lib/libltdl/Makefile src/lib/pcre/Makefile src/lib/md5/Makefile src/lib/patches/Makefile src/targets/Makefile src/targets/cgi/Makefile src/targets/apache13/Makefile src/targets/apache13/hook/Makefile src/targets/apache13/p3runConfigure src/targets/isapi/Makefile etc/Makefile etc/parser3.charsets/Makefile bin/Makefile bin/auto.p.dist"}
  EOF
  cat >> $CONFIG_STATUS <<\EOF
  for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
- Line 3449  if test "$no_recursion" != yes; then
+ Line 3809  if test "$no_recursion" != yes; then
      esac
    done
-   for ac_config_dir in src/libltdl; do
+   for ac_config_dir in src/lib/libltdl; do
      # Do not complain, so a configure script can configure whichever
      # parts of a large source tree are present.

E-mail:

Removed from v.1.4
changed lines
	Added in v.1.38