[BACK]Return to missing CVS log [TXT] [DIR] Up to [parser3project] / parser3

Diff for /parser3/missing between versions 1.1 and 1.4

version 1.1, 2002/01/31 10:20:14 version 1.4, 2017/05/25 12:16:08
Line 1 Line 1
 #! /bin/sh  #! /bin/sh
 # Common stub for a few missing GNU programs while installing.  # Common wrapper for a few potentially missing GNU programs.
 # Copyright (C) 1996, 1997 Free Software Foundation, Inc.  
 # Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996.  scriptversion=2013-10-28.13; # UTC
   
   # Copyright (C) 1996-2014 Free Software Foundation, Inc.
   # Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
   
 # This program is free software; you can redistribute it and/or modify  # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by  # it under the terms of the GNU General Public License as published by
Line 14 Line 17
 # GNU General Public License for more details.  # GNU General Public License for more details.
   
 # You should have received a copy of the GNU General Public License  # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software  # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  
 # 02111-1307, USA.  # As a special exception to the GNU General Public License, if you
   # distribute this file as part of a program that contains a
   # configuration script generated by Autoconf, you may include it under
   # the same distribution terms that you use for the rest of that program.
   
 if test $# -eq 0; then  if test $# -eq 0; then
   echo 1>&2 "Try \`$0 --help' for more information"    echo 1>&2 "Try '$0 --help' for more information"
   exit 1    exit 1
 fi  fi
   
 case "$1" in  case $1 in
   
     --is-lightweight)
       # Used by our autoconf macros to check whether the available missing
       # script is modern enough.
       exit 0
       ;;
   
     --run)
       # Back-compat with the calling convention used by older automake.
       shift
       ;;
   
   -h|--h|--he|--hel|--help)    -h|--h|--he|--hel|--help)
     echo "\      echo "\
 $0 [OPTION]... PROGRAM [ARGUMENT]...  $0 [OPTION]... PROGRAM [ARGUMENT]...
   
 Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an  Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
 error status if there is no known handling for PROGRAM.  to PROGRAM being missing or too old.
   
 Options:  Options:
   -h, --help      display this help and exit    -h, --help      display this help and exit
   -v, --version   output version information and exit    -v, --version   output version information and exit
   
 Supported PROGRAM values:  Supported PROGRAM values:
   aclocal      touch file \`aclocal.m4'    aclocal   autoconf  autoheader   autom4te  automake  makeinfo
   autoconf     touch file \`configure'    bison     yacc      flex         lex       help2man
   autoheader   touch file \`config.h.in'  
   automake     touch all \`Makefile.in' files  Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
   bison        create \`y.tab.[ch]', if possible, from existing .[ch]  'g' are ignored when checking the name.
   flex         create \`lex.yy.c', if possible, from existing .c  
   lex          create \`lex.yy.c', if possible, from existing .c  Send bug reports to <bug-automake@gnu.org>."
   makeinfo     touch the output file      exit $?
   yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"  
     ;;      ;;
   
   -v|--v|--ve|--ver|--vers|--versi|--versio|--version)    -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
     echo "missing - GNU libit 0.0"      echo "missing $scriptversion (GNU Automake)"
       exit $?
     ;;      ;;
   
   -*)    -*)
     echo 1>&2 "$0: Unknown \`$1' option"      echo 1>&2 "$0: unknown '$1' option"
     echo 1>&2 "Try \`$0 --help' for more information"      echo 1>&2 "Try '$0 --help' for more information"
     exit 1      exit 1
     ;;      ;;
   
   aclocal)  
     echo 1>&2 "\  
 WARNING: \`$1' is missing on your system.  You should only need it if  
          you modified \`acinclude.m4' or \`configure.in'.  You might want  
          to install the \`Automake' and \`Perl' packages.  Grab them from  
          any GNU archive site."  
     touch aclocal.m4  
     ;;  
   
   autoconf)  
     echo 1>&2 "\  
 WARNING: \`$1' is missing on your system.  You should only need it if  
          you modified \`configure.in'.  You might want to install the  
          \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU  
          archive site."  
     touch configure  
     ;;  
   
   autoheader)  
     echo 1>&2 "\  
 WARNING: \`$1' is missing on your system.  You should only need it if  
          you modified \`acconfig.h' or \`configure.in'.  You might want  
          to install the \`Autoconf' and \`GNU m4' packages.  Grab them  
          from any GNU archive site."  
     files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' configure.in`  
     test -z "$files" && files="config.h"  
     touch_files=  
     for f in $files; do  
       case "$f" in  
       *:*) touch_files="$touch_files "`echo "$f" |  
                                        sed -e 's/^[^:]*://' -e 's/:.*//'`;;  
       *) touch_files="$touch_files $f.in";;  
       esac  
     done  
     touch $touch_files  
     ;;  
   
   automake)  
     echo 1>&2 "\  
 WARNING: \`$1' is missing on your system.  You should only need it if  
          you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.  
          You might want to install the \`Automake' and \`Perl' packages.  
          Grab them from any GNU archive site."  
     find . -type f -name Makefile.am -print |  
            sed 's/\.am$/.in/' |  
            while read f; do touch "$f"; done  
     ;;  
   
   bison|yacc)  
     echo 1>&2 "\  
 WARNING: \`$1' is missing on your system.  You should only need it if  
          you modified a \`.y' file.  You may need the \`Bison' package  
          in order for those modifications to take effect.  You can get  
          \`Bison' from any GNU archive site."  
     rm -f y.tab.c y.tab.h  
     if [ $# -ne 1 ]; then  
         eval LASTARG="\${$#}"  
         case "$LASTARG" in  
         *.y)  
             SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`  
             if [ -f "$SRCFILE" ]; then  
                  cp "$SRCFILE" y.tab.c  
             fi  
             SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`  
             if [ -f "$SRCFILE" ]; then  
                  cp "$SRCFILE" y.tab.h  
             fi  
           ;;  
         esac  
     fi  
     if [ ! -f y.tab.h ]; then  
         echo >y.tab.h  
     fi  
     if [ ! -f y.tab.c ]; then  
         echo 'main() { return 0; }' >y.tab.c  
     fi  
     ;;  
   
   lex|flex)  
     echo 1>&2 "\  
 WARNING: \`$1' is missing on your system.  You should only need it if  
          you modified a \`.l' file.  You may need the \`Flex' package  
          in order for those modifications to take effect.  You can get  
          \`Flex' from any GNU archive site."  
     rm -f lex.yy.c  
     if [ $# -ne 1 ]; then  
         eval LASTARG="\${$#}"  
         case "$LASTARG" in  
         *.l)  
             SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`  
             if [ -f "$SRCFILE" ]; then  
                  cp "$SRCFILE" lex.yy.c  
             fi  
           ;;  
         esac  
     fi  
     if [ ! -f lex.yy.c ]; then  
         echo 'main() { return 0; }' >lex.yy.c  
     fi  
     ;;  
   
   makeinfo)  
     echo 1>&2 "\  
 WARNING: \`$1' is missing on your system.  You should only need it if  
          you modified a \`.texi' or \`.texinfo' file, or any other file  
          indirectly affecting the aspect of the manual.  The spurious  
          call might also be the consequence of using a buggy \`make' (AIX,  
          DU, IRIX).  You might want to install the \`Texinfo' package or  
          the \`GNU make' package.  Grab either from any GNU archive site."  
     file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`  
     if test -z "$file"; then  
       file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`  
       file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`  
     fi  
     touch $file  
     ;;  
   
   *)  
     echo 1>&2 "\  
 WARNING: \`$1' is needed, and you do not seem to have it handy on your  
          system.  You might have modified some files without having the  
          proper tools for further handling them.  Check the \`README' file,  
          it often tells you about the needed prerequirements for installing  
          this package.  You may also peek at any GNU archive site, in case  
          some other package would contain this missing \`$1' program."  
     exit 1  
     ;;  
 esac  esac
   
 exit 0  # Run the given program, remember its exit status.
   "$@"; st=$?
   
   # If it succeeded, we are done.
   test $st -eq 0 && exit 0
   
   # Also exit now if we it failed (or wasn't found), and '--version' was
   # passed; such an option is passed most likely to detect whether the
   # program is present and works.
   case $2 in --version|--help) exit $st;; esac
   
   # Exit code 63 means version mismatch.  This often happens when the user
   # tries to use an ancient version of a tool on a file that requires a
   # minimum version.
   if test $st -eq 63; then
     msg="probably too old"
   elif test $st -eq 127; then
     # Program was missing.
     msg="missing on your system"
   else
     # Program was found and executed, but failed.  Give up.
     exit $st
   fi
   
   perl_URL=http://www.perl.org/
   flex_URL=http://flex.sourceforge.net/
   gnu_software_URL=http://www.gnu.org/software
   
   program_details ()
   {
     case $1 in
       aclocal|automake)
         echo "The '$1' program is part of the GNU Automake package:"
         echo "<$gnu_software_URL/automake>"
         echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
         echo "<$gnu_software_URL/autoconf>"
         echo "<$gnu_software_URL/m4/>"
         echo "<$perl_URL>"
         ;;
       autoconf|autom4te|autoheader)
         echo "The '$1' program is part of the GNU Autoconf package:"
         echo "<$gnu_software_URL/autoconf/>"
         echo "It also requires GNU m4 and Perl in order to run:"
         echo "<$gnu_software_URL/m4/>"
         echo "<$perl_URL>"
         ;;
     esac
   }
   
   give_advice ()
   {
     # Normalize program name to check for.
     normalized_program=`echo "$1" | sed '
       s/^gnu-//; t
       s/^gnu//; t
       s/^g//; t'`
   
     printf '%s\n' "'$1' is $msg."
   
     configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
     case $normalized_program in
       autoconf*)
         echo "You should only need it if you modified 'configure.ac',"
         echo "or m4 files included by it."
         program_details 'autoconf'
         ;;
       autoheader*)
         echo "You should only need it if you modified 'acconfig.h' or"
         echo "$configure_deps."
         program_details 'autoheader'
         ;;
       automake*)
         echo "You should only need it if you modified 'Makefile.am' or"
         echo "$configure_deps."
         program_details 'automake'
         ;;
       aclocal*)
         echo "You should only need it if you modified 'acinclude.m4' or"
         echo "$configure_deps."
         program_details 'aclocal'
         ;;
      autom4te*)
         echo "You might have modified some maintainer files that require"
         echo "the 'autom4te' program to be rebuilt."
         program_details 'autom4te'
         ;;
       bison*|yacc*)
         echo "You should only need it if you modified a '.y' file."
         echo "You may want to install the GNU Bison package:"
         echo "<$gnu_software_URL/bison/>"
         ;;
       lex*|flex*)
         echo "You should only need it if you modified a '.l' file."
         echo "You may want to install the Fast Lexical Analyzer package:"
         echo "<$flex_URL>"
         ;;
       help2man*)
         echo "You should only need it if you modified a dependency" \
              "of a man page."
         echo "You may want to install the GNU Help2man package:"
         echo "<$gnu_software_URL/help2man/>"
       ;;
       makeinfo*)
         echo "You should only need it if you modified a '.texi' file, or"
         echo "any other file indirectly affecting the aspect of the manual."
         echo "You might want to install the Texinfo package:"
         echo "<$gnu_software_URL/texinfo/>"
         echo "The spurious makeinfo call might also be the consequence of"
         echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
         echo "want to install GNU make:"
         echo "<$gnu_software_URL/make/>"
         ;;
       *)
         echo "You might have modified some files without having the proper"
         echo "tools for further handling them.  Check the 'README' file, it"
         echo "often tells you about the needed prerequisites for installing"
         echo "this package.  You may also peek at any GNU archive site, in"
         echo "case some other package contains this missing '$1' program."
         ;;
     esac
   }
   
   give_advice "$1" | sed -e '1s/^/WARNING: /' \
                          -e '2,$s/^/         /' >&2
   
   # Propagate the correct exit status (expected to be 127 for a program
   # not found, 63 for a program that failed due to version mismatch).
   exit $st
   
   # Local variables:
   # eval: (add-hook 'write-file-hooks 'time-stamp)
   # time-stamp-start: "scriptversion="
   # time-stamp-format: "%:y-%02m-%02d.%02H"
   # time-stamp-time-zone: "UTC"
   # time-stamp-end: "; # UTC"
   # End:
Removed from v.1.1  
changed lines
  Added in v.1.4

E-mail: