--- parser3/Attic/buildall-with-xml	2009/04/21 10:25:01	1.26
+++ parser3/Attic/buildall-with-xml	2012/06/13 21:44:40	1.50
@@ -1,9 +1,12 @@
 #!/bin/sh
 
-# $Id: buildall-with-xml,v 1.26 2009/04/21 10:25:01 misha Exp $
+# $Id: buildall-with-xml,v 1.50 2012/06/13 21:44:40 moko Exp $
 
 install_directory=$HOME/parser3install
 sendmail_command="/usr/sbin/sendmail -i -t -f postmaster"
+download="wget -c --passive-ftp"
+cflags=""
+#cflags="--with-pic" #required for apache module on x64
 
 echo "buildall-with-xml"
 echo "Script author: Alexander Petrosian <paf@design.ru> (http://paf.design.ru)"
@@ -17,21 +20,22 @@ mkdir src >/dev/null 2>&1
 
 if test ! -f "$project_directory/gc/lib/libgc.a"; then
   cd $project_directory/src
-  libgc="gc6.8"
+# libgc="gc6.8" # FreeBSD 4.X is not supported in newer gc version
+  libgc="gc-7.1"
   if test ! -f "$libgc.tar.gz"; then
     echo "Downloading gc [1 lib of 4]..."
-    wget -c http://www.hpl.hp.com/personal/Hans_Boehm/gc/gc_source/$libgc.tar.gz
+    $download http://www.hpl.hp.com/personal/Hans_Boehm/gc/gc_source/$libgc.tar.gz
   fi
   echo "Unpacking gc..."
   rm -rf $libgc
   gunzip -c $libgc.tar.gz | tar vxf - >/dev/null
   cd $libgc
   echo "Configuring gc..."
-  CPPFLAGS="-DUSE_LIBC_PRIVATES -DUSE_MMAP -DUSE_MUNMAP" \
+  CPPFLAGS="-DUSE_LIBC_PRIVATES -DUSE_MMAP -DDONT_ADD_BYTE_AT_END" \
   ./configure --prefix=$project_directory/gc \
     --disable-threads \
     --disable-shared \
-    --silent
+    --silent $cflags
   echo "Building gc..."
   make
   make install
@@ -39,13 +43,12 @@ if test ! -f "$project_directory/gc/lib/
   rm -rf $libgc
 fi
 
-
 if test ! -f "$project_directory/pcre/lib/libpcre.a"; then
   cd $project_directory/src
-  libpcre="pcre-7.9"
+  libpcre="pcre-8.30"
   if test ! -f "$libpcre.tar.gz"; then
     echo "Downloading pcre [2 lib of 4]..."
-    wget -c ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/$libpcre.tar.gz
+    $download ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/$libpcre.tar.gz
   fi
   echo "Unpacking pcre..."
   rm -rf $libpcre
@@ -54,29 +57,27 @@ if test ! -f "$project_directory/pcre/li
   current_dir=`pwd`
   echo "Configuring pcre..."
   ./configure --prefix="$project_directory/pcre" \
+    --with-match-limit=10000 \
+    --with-match-limit-recursion=10000 \
     --enable-utf8 \
     --enable-unicode-properties \
     --disable-shared \
     --disable-cpp \
     --disable-pcregrep-libz \
-    --disable-pcregrep-libz2 \
-    --silent
+    --disable-pcregrep-libbz2 \
+    --silent $cflags
   echo "Building pcre..."
-  make
   make install
-  echo "Copying required files (Parser3 uses some PCRE internals)..."
-  cp pcre_internal.h ucp.h $project_directory/pcre/include
   cd ..
   rm -rf $libpcre
 fi
 
-
 if test ! -f "$project_directory/gnome/lib/libxml2.a"; then
   cd $project_directory/src
-  libxml2="libxml2-2.6.32"
+  libxml2="libxml2-2.8.0"
   if test ! -f "$libxml2.tar.gz"; then
     echo "Downloading libxml [3 lib of 4]..."
-    wget -c --passive-ftp ftp://xmlsoft.org/libxml2/$libxml2.tar.gz
+    $download ftp://xmlsoft.org/libxml2/$libxml2.tar.gz
   fi
   echo "Unpacking libxml2... (be patient)"
   rm -rf $libxml2
@@ -85,6 +86,7 @@ if test ! -f "$project_directory/gnome/l
   #sax1, output, tree, xinclude[in libxslt], html[in libxslt, mode=html?], xptr[xinclude], pattern -- needed!
   echo "Configuring libxml..."
   ./configure --prefix=$project_directory/gnome \
+    --without-catalog \
     --without-iconv \
     --without-threads \
     --without-debug \
@@ -103,8 +105,9 @@ if test ! -f "$project_directory/gnome/l
     --without-http \
     --without-docbook \
     --without-zlib \
+    --without-lzma \
     --disable-shared \
-    --silent
+    --silent $cflags
   echo "int main(){return 0;}">testapi.c
   echo "int main(){return 0;}">runtest.c
   echo "Building libxml..."
@@ -116,10 +119,10 @@ fi
 
 if test ! -f "$project_directory/gnome/lib/libxslt.a"; then
   cd $project_directory/src
-  libxslt="libxslt-1.1.24"
+  libxslt="libxslt-1.1.26"
   if test ! -f "$libxslt.tar.gz"; then
     echo "Downloading libxslt [4 lib of 4]..."
-    wget -c --passive-ftp ftp://xmlsoft.org/libxslt/$libxslt.tar.gz
+    $download ftp://xmlsoft.org/libxslt/$libxslt.tar.gz
   fi
   echo "Unpacking libxslt... (be patient)"
   rm -rf $libxslt
@@ -133,7 +136,7 @@ if test ! -f "$project_directory/gnome/l
      --without-crypto \
      --without-plugins \
      --disable-shared \
-     --silent
+     --silent $cflags
   echo "Building libxslt..."
   make
   make install
@@ -141,25 +144,25 @@ if test ! -f "$project_directory/gnome/l
   rm -rf $libxslt
 fi
 
-
 cd $parser3_directory
 
-
 if test ! -f "Makefile"; then
-  options=""
-  options="$options --with-static-gc=$project_directory/gc/lib"
-  options="$options --with-static-pcre=$project_directory/pcre"
-  options="$options --with-static-xml=$project_directory/gnome"
+  options="$@"
+  options="$options --with-gc=$project_directory/gc/lib"
+  options="$options --with-pcre=$project_directory/pcre"
+  options="$options --with-xml=$project_directory/gnome"
+#  options="$options --with-apache"
 #  options="$options --disable-safe-mode"
-#  options="$options --with-dynamic-stdcpp"
 #  options="$options --disable-stringstream"
-  options="$options --silent"
-
+  options="$options --with-included-ltdl"
+  options="$options --silent $cflags"
   echo "Configuring parser3..."
   ./configure --prefix=$install_directory "--with-sendmail=$sendmail_command" $options
 fi
+
 echo "Building parser3..."
 make install
+if test $? -ne 0; then exit 1; fi
 
 # remove debug info
 # strip ${install_directory}/bin/parser3
@@ -169,9 +172,8 @@ echo "DONE"
 echo
 echo
 echo "********************************************************************************************************"
-echo "Now you can copy $install_directory with subdirectories"
+echo "Now you can copy $install_directory/bin to your cgi-bin directory"
 echo "  -Parser3 with XML support-"
-echo "to your cgi-bin directory"
 echo "Read more about installing Parser here:"
 echo "  http://www.parser.ru/en/docs/lang/install4apachecgi.htm in English"
 echo "  http://www.parser.ru/docs/lang/install4apachecgi.htm in Russian"