--- parser3/Attic/buildall-with-xml	2007/02/03 18:15:22	1.5
+++ parser3/Attic/buildall-with-xml	2012/06/12 21:12:23	1.48
@@ -1,9 +1,12 @@
 #!/bin/sh
 
-# $Id: buildall-with-xml,v 1.5 2007/02/03 18:15:22 misha Exp $
+# $Id: buildall-with-xml,v 1.48 2012/06/12 21:12:23 moko Exp $
 
 install_directory=$HOME/parser3install
 sendmail_command="/usr/sbin/sendmail -i -t -f postmaster"
+download="wget -c --passive-ftp"
+cflags=""
+cflags="CFLAGS=-fPIC CXXFLAGS=-fPIC" #required for apache module on x64
 
 echo "buildall-with-xml"
 echo "Script author: Alexander Petrosian <paf@design.ru> (http://paf.design.ru)"
@@ -17,73 +20,153 @@ mkdir src >/dev/null 2>&1
 
 if test ! -f "$project_directory/gc/lib/libgc.a"; then
   cd $project_directory/src
-  echo "Downloading libgc [1 lib of 3]..."
-  wget -c http://www.hpl.hp.com/personal/Hans_Boehm/gc/gc_source/gc6.6.tar.gz
-  echo "Unpacking..."
-  gunzip -c gc6.6.tar.gz | tar vxf - >/dev/null
-  cd gc6.6
-  echo "Configuring libgc..."
-  CPPFLAGS="-DUSE_LIBC_PRIVATES -DUSE_MMAP -DUSE_MUNMAP" \
-  ./configure --prefix=$project_directory/gc --disable-threads --disable-shared --silent
-  echo "Building libgc..."
+# libgc="gc6.8" # FreeBSD 4.X is not supported in newer gc version
+  libgc="gc-7.1"
+  if test ! -f "$libgc.tar.gz"; then
+    echo "Downloading gc [1 lib of 4]..."
+    $download http://www.hpl.hp.com/personal/Hans_Boehm/gc/gc_source/$libgc.tar.gz
+  fi
+  echo "Unpacking gc..."
+  rm -rf $libgc
+  gunzip -c $libgc.tar.gz | tar vxf - >/dev/null
+  cd $libgc
+  echo "Configuring gc..."
+  CPPFLAGS="-DUSE_LIBC_PRIVATES -DUSE_MMAP -DDONT_ADD_BYTE_AT_END" \
+  ./configure --prefix=$project_directory/gc \
+    --disable-threads \
+    --disable-shared \
+    --silent $cflags
+  echo "Building gc..."
   make
   make install
+  cd ..
+  rm -rf $libgc
 fi
 
+if test ! -f "$project_directory/pcre/lib/libpcre.a"; then
+  cd $project_directory/src
+  libpcre="pcre-8.30"
+  if test ! -f "$libpcre.tar.gz"; then
+    echo "Downloading pcre [2 lib of 4]..."
+    $download ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/$libpcre.tar.gz
+  fi
+  echo "Unpacking pcre..."
+  rm -rf $libpcre
+  gunzip -c $libpcre.tar.gz | tar vxf - >/dev/null
+  cd $libpcre
+  current_dir=`pwd`
+  echo "Configuring pcre..."
+  ./configure --prefix="$project_directory/pcre" \
+    --with-match-limit=10000 \
+    --with-match-limit-recursion=10000 \
+    --enable-utf8 \
+    --enable-unicode-properties \
+    --disable-shared \
+    --disable-cpp \
+    --disable-pcregrep-libz \
+    --disable-pcregrep-libbz2 \
+    --silent $cflags
+  echo "Building pcre..."
+  make install
+  cd ..
+  rm -rf $libpcre
+fi
 
 if test ! -f "$project_directory/gnome/lib/libxml2.a"; then
   cd $project_directory/src
-  echo "Downloading libxml [2 lib of 3]..."
-  wget -c --passive-ftp ftp://xmlsoft.org/libxml2/libxml2-2.6.27.tar.gz
-  echo "Unpacking... (be patient)"
-  gunzip -c libxml2-2.6.27.tar.gz | tar vxf - >/dev/null
-  cd libxml2-2.6.27
-  #sax1, output, tree, xinclude[in libxslt], html[in libxslt, mode=html?] xptr[xinclude]-- needed!
+  libxml2="libxml2-2.8.0"
+  if test ! -f "$libxml2.tar.gz"; then
+    echo "Downloading libxml [3 lib of 4]..."
+    $download ftp://xmlsoft.org/libxml2/$libxml2.tar.gz
+  fi
+  echo "Unpacking libxml2... (be patient)"
+  rm -rf $libxml2
+  gunzip -c $libxml2.tar.gz | tar vxf - >/dev/null
+  cd $libxml2
+  #sax1, output, tree, xinclude[in libxslt], html[in libxslt, mode=html?], xptr[xinclude], pattern -- needed!
   echo "Configuring libxml..."
   ./configure --prefix=$project_directory/gnome \
-    --without-iconv --without-threads --without-debug \
-    --without-iso8859x --without-legacy \
-    --without-pattern --without-push --without-python \
-    --without-reader --without-writer --without-readline --without-regexps \
-    --without-schemas --without-schematron \
+    --without-catalog \
+    --without-iconv \
+    --without-threads \
+    --without-debug \
+    --without-iso8859x \
+    --without-legacy \
+    --without-push \
+    --without-python \
+    --without-reader \
+    --without-writer \
+    --without-readline \
+    --without-regexps \
+    --without-schemas \
+    --without-schematron \
     --without-modules \
+    --without-ftp \
+    --without-http \
+    --without-docbook \
     --without-zlib \
-    --disable-shared --silent
+    --without-lzma \
+    --disable-shared \
+    --silent $cflags
   echo "int main(){return 0;}">testapi.c
   echo "int main(){return 0;}">runtest.c
   echo "Building libxml..."
   make
   make install
+  cd ..
+  rm -rf $libxml2
 fi
 
 if test ! -f "$project_directory/gnome/lib/libxslt.a"; then
   cd $project_directory/src
-  echo "Downloading libxslt [3 lib of 3]..."
-  wget -c --passive-ftp ftp://xmlsoft.org/libxslt/libxslt-1.1.20.tar.gz
-  echo "Unpacking... (be patient)"
-  gunzip -c libxslt-1.1.20.tar.gz | tar vxf - >/dev/null
-  cd libxslt-1.1.20
+  libxslt="libxslt-1.1.26"
+  if test ! -f "$libxslt.tar.gz"; then
+    echo "Downloading libxslt [4 lib of 4]..."
+    $download ftp://xmlsoft.org/libxslt/$libxslt.tar.gz
+  fi
+  echo "Unpacking libxslt... (be patient)"
+  rm -rf $libxslt
+  gunzip -c $libxslt.tar.gz | tar vxf - >/dev/null
+  cd $libxslt
   echo "Configuring libxslt..."
   ./configure --prefix=$project_directory/gnome \
      --with-libxml-prefix=$project_directory/gnome \
-     --without-debug --without-debugger --without-crypto --without-plugins --disable-shared  --silent
+     --without-debug \
+     --without-debugger \
+     --without-crypto \
+     --without-plugins \
+     --disable-shared \
+     --silent $cflags
   echo "Building libxslt..."
   make
   make install
+  cd ..
+  rm -rf $libxslt
 fi
 
 cd $parser3_directory
 
 if test ! -f "Makefile"; then
+  options="$@"
+  options="$options --with-static-gc=$project_directory/gc/lib"
+  options="$options --with-static-pcre=$project_directory/pcre"
+  options="$options --with-static-xml=$project_directory/gnome"
+#  options="$options --with-apache"
+#  options="$options --disable-safe-mode"
+#  options="$options --disable-stringstream"
+  options="$options --with-included-ltdl"
+  options="$options --silent $cflags"
   echo "Configuring parser3..."
-  ./configure --prefix=$install_directory \
-     "--with-sendmail=$sendmail_command" \
-     --with-static-gc=$project_directory/gc/lib \
-     --with-static-xml=$project_directory/gnome \
-     --silent
+  ./configure --prefix=$install_directory "--with-sendmail=$sendmail_command" $options
 fi
+
 echo "Building parser3..."
 make install
+if test $? -ne 0; then exit 1; fi
+
+# remove debug info
+# strip ${install_directory}/bin/parser3
+
 echo "DONE"
 
 echo