[BACK]Return to INSTALL CVS log [TXT] [DIR] Up to [parser3project] / parser3

Diff for /parser3/INSTALL between versions 1.15 and 1.48.2.1

version 1.15, 2002/03/25 11:36:23 version 1.48.2.1, 2005/12/28 16:45:36
Line 1 Line 1
 0.Assuming your perform your builds in $D directory   Alexander Petrosian <paf@design.ru> (http://paf.design.ru)
   and suggested subdirectories.  $Id$
   
 1.What is the process to compile Parser3?   
   
   As most UNIX programs Parser3 follows the "standard":  1.What is the process to compile Parser3?
   
   mkdir $D/parser3project    Just start ./buildall-with-xml script and you would get $HOME/parser3install/bin/parser3 binary.
   cd $D/parser3project    In case you do not need XML support, use ./buildall-without-xml
   gunzip -c parser3-x.x.tar.gz | tar xvf -  
   mv parser3-x.x parser3  
   cd parser3  
   ./configure --prefix=/usr/local  
   make  
     
   That renaming is needed for SQL drivers to be able to find   
   necessary include-file in Parser3 sources.  
   
   NOTE:  
   On some system you should run 'gmake'.  
   
   NOTE:    NOTE:
   By default your would get 'parser3' binary without support of these features:    On some platforms there is special version of libgc patched to support some
         * xml(xdoc and xnode classes)    local piece of subtlety.
   Read section (3) on getting xml-abled parser.    Official libgc does not work there, use special version instead.
     (OpenBSD reported to be one of those)
   NOTE:   
   In case you're not root on machine you're installing Parser,  
   we recommend you to do:  
   ./configure --prefix=/your/home/parser3install  
   and afterwards copy parser3install/bin/parser3 to your CGI directory  
   or make a symlink [if your web server configured to follow symlinks].  
   
   NOTE:    NOTE:
   You can disable libstdc++ linkage by setting    On some systems there are no "make" and you should run 'gmake', change buildall script accordingly then.
   --disable-link-libstdcpp  
   option to configure.    
   
   NOTE:  
   You can disable any exec operations by setting  
   --disable-execs  
   option to configure.  
   file::exec, file::cgi and mail:send (unix version) methods would be disabled.  
     
   NOTE:  
   You can disable reading and executing files, belonging to group   
   other then current by setting  
   --disable-foreign-group-files  
   option to configure.  
     
   
 2.What is the process to install Parser3?  2.What is the process to install Parser3?
   
Line 56 Line 23
   Installation layout:    Installation layout:
     $prefix/bin/      $prefix/bin/
       parser3             -- CGI and command line Parser3 interpreter        parser3             -- CGI and command line Parser3 interpreter
         auto.p.dist         -- configuration file sample, 
                                copy it to auto.p and adjust to your needs
     $prefix/etc/      $prefix/etc/
       parser3.conf        -- main configuration file  
       parser3.charsets/   -- charset definition files        parser3.charsets/   -- charset definition files
         koi8-r.cfg        -- cyrillic charset [KOI8-R encoding]          koi8-r.cfg        -- cyrillic charset [KOI8-R encoding]
         windows-1250.cfg  -- central europian charset [windows-1250 encoding]          windows-1250.cfg  -- central europian charset [windows-1250 encoding]
         windows-1251.cfg  -- cyrillic charset [windows-1251 encoding]          windows-1251.cfg  -- cyrillic charset [windows-1251 encoding]
         windows-1257.cfg  -- baltic charset [windows-1257 encoding]          windows-1257.cfg  -- baltic charset [windows-1257 encoding]
   
   NOTE:  3.I have heard about $mail:receive experimental support, how do I use it?
     For subsequent compilations+installs     You need two more libraries
     to prevent configuration files to be overwritten use  
     
     make install-exec  
       
     it will update parser3 binary only.  
   
 3.What other libraries are needed to compile/install parser?   
   
   * You can compile and use parser without any additional libraries.  
     That would be 'basic' version of it.  
   
   
   * In case you wish xml(xdoc and xnode classes) support you need libraries  
       libxml2 >= 2.3.6  
       libxslt >= 1.0.9  
       glib >= 1.2.10        glib >= 1.2.10
       gdome2 >= 0.7.0        gmime >= 1.0.1 [http://spruce.sourceforge.net/gmime/sources/v1.0/gmime-1.0.8.tar.gz]
     on your system, and specify path to them to Parser3 configure script.      on your system, and specify path to them to Parser3 configure script.
   
     Sources of these two libraries must be patched prior to compile:       glib:
       * libxml2  
       * libxslt  
   
     Installation sequence of these libraries to $D/gnome:  
   
     libxml2:  [ftp://ftp.gnome.org/pub/GNOME/stable/sources/libxml/libxml2-2.4.12.tar.gz]  
   
     cd libxml2-x.x.x  
     patch -p0 < $D/parser3project/parser3/src/patches/libxml_error_column_tab.patch  
     patch -p0 < $D/parser3project/parser3/src/patches/libxml_htmloutput_of_xslemptyattr_emptyquotes.patch  
     patch -p0 < $D/parser3project/parser3/src/patches/libxml_transcoder_context1.patch  
     patch -p0 < $D/parser3project/parser3/src/patches/libxml_transcoder_context2.patch  
     patch -p0 < $D/parser3project/parser3/src/patches/libxml_transcoder_context3.patch  
     patch -p0 < $D/parser3project/parser3/src/patches/libxml_transcoder_context4.patch  
     ./configure --prefix=$D/gnome --without-zlib  
     make install  
   
     libxslt:  [ftp://ftp.gnome.org/pub/GNOME/stable/sources/libxslt/libxslt-1.0.9.tar.gz]  
   
     cd libxslt-x.x.x      cd $HOME/parser3project/src
     patch -p0 < $D/parser3project/parser3/src/patches/libxslt_html_output_no_charset_meta.patch      #on freebsd5 this is reported to work: ftp://ftp.gtk.org/pub/gtk/v1.1/glib-1.1.16.tar.gz
     ./configure --with-libxml-prefix=$D/gnome --prefix=$D/gnome --without-debug --without-debugger      wget --passive-ftp ftp://ftp.gtk.org/pub/gtk/v1.2/glib-1.2.10.tar.gz
       gunzip -c glib-1.2.10.tar.gz | tar vxf -
       cd glib-1.2.10
       ./configure --prefix=$HOME/parser3project/gnome --silent
     make install      make install
   
     glib:  [ftp://ftp.gtk.org/pub/gtk/v1.2/glib-1.2.10.tar.gz]      gmime:
   
     cd glib-x.x.x      cd gmime-x.x.x
     ./configure --prefix=$D/gnome       ./configure --prefix=$HOME/parser3project/gnome
     make install      make install
   
     gdome2:  [http://phd.cs.unibo.it/gdome2/tarball/gdome2-0.7.0.tar.gz]      You need to change buildall script to add this to parser3 configure line:
           --with-static-mailreceive=$HOME/parser3project/gnome
     cd gdome2-x.x.x  
         patch -p0 < $D/parser3project/parser3/src/patches/libgdome_cpp_syntax1.patch  
         patch -p0 < $D/parser3project/parser3/src/patches/libgdome_cpp_syntax2.patch  
         patch -p0 < $D/parser3project/parser3/src/patches/libgdome_morestatic.patch  
     ./configure --with-glib-prefix=$D/gnome --disable-glibtest --with-libxml-prefix=$D/gnome --prefix=$D/gnome  
     make install  
   
     And copy these additional headers into install includes directory  
   
     mkdir $D/gnome/include/libgdome/gdomecore  
     cp libgdome/gdomecore/gdome-xml-node.h $D/gnome/include/libgdome/gdomecore  
     cp libgdome/gdomecore/gdome-xml-document.h $D/gnome/include/libgdome/gdomecore  
       
   
     Parser3 configure options, choose whether you need static or dynamic linkage with xml libs:  
         --with-static-xml=$D/gnome  
         --with-shared-xml=$D/gnome  
   
     NOTE:      NOTE:
     In case your glib as installed into some other prefix,      In case your glib as installed into some other prefix,
     specify it's configuration file with      specify it's configuration file with
         --with-glib-config=/path/to/your/glib-config          --with-glib-config=/path/to/your/glib-config
         NOTE:      NOTE:
         In case you are using SHARED xml libraries, you may want to link in direct path to them,      In case you are using SHARED mime library, you may want to link in direct path to it,
     use this key to specify which linker key to use do do that:      use this key to specify which linker key to use do do that:
         --with-pathlink=LKEY    put dynamic libraries paths to binary          --with-pathlink=LKEY    put dynamic libraries paths to binary
                                 using linker key (-R, -rpath-link)                                  using linker key (-R, -rpath-link)
   
    4.
 Alexandr Petrosian <paf@design.ru> (http://paf.design.ru)  
   
 $Id$    In case you're not root on machine you're installing Parser,
     we recommend you to do:
     ./configure --prefix=$HOME/parser3install
     and afterwards copy $HOME/parser3install/bin/parser3 to your CGI directory
     or make a symlink [if your web server configured to follow symlinks].
   
     You can disable any exec operations by setting
     --disable-execs
     option to configure.
     file::exec, file::cgi and mail:send (unix version) methods would be disabled.
   
     You can enable reading and executing files, not belonging to group+user 
     other then effective by setting
     --disable-safe-mode
     option to configure.
     
     You can disable user-configured sendmail commands by forcing it, setting
     --with=sendmail="COMMAND"
     option to configure, for example:
     --with-sendmail="/usr/sbin/sendmail -i -t -f postmaster"
   
     In case you are experiencing problem with gcc runtime exception handling,
     try to configure with
     --with-sjlj-exceptions
     option.  
   
     By default libstdc++ is linked statically, you can re-enable dynamic libstdc++ linkage by specifying
     --with-dynamic-stdcpp
     option to configure.  
   
   
     Some root config options can be specified at configure time, and would override autodetects.
   
     List of enabled charsets:
     --with-charsets=CHARSET[,CHARSET,...]  Enables charsets in root config (windows-1251,
                             windows-1250 windows-1257 koi8-r; Default is windows-1251)
     SQL clients:
     --with-mysql-client=mysqlclientlib?params
     --with-pgsql-client=pgsqlclientlib?params
     --with-oracle-client=oracleclientlib?params
     
   5.
     If you need to build apache 1.3 parser module, get source distribution of apache 1.3,
     run configure there, then run parser configure with one more option:
     --with-apache13=Apache13 source distribution directory
     after 'make' go to that directory and run
   
     ./p3runConfigure <any additional options to apache configure to pass>
     
     example:
     ./p3runConfigure --prefix=$HOME/apache13install --enable-module=rewrite
   
     WARNING: if you want to use apache configure option --enable-shared=max, do this:
     ./p3runConfigure --enable-shared=max --disable-shared=mod_parser3.c
Removed from v.1.15  
changed lines
  Added in v.1.48.2.1

E-mail: