[BACK]Return to INSTALL CVS log [TXT] [DIR] Up to [parser3project] / parser3

Diff for /parser3/INSTALL between versions 1.7 and 1.21.2.1

version 1.7, 2002/02/22 13:02:40 version 1.21.2.1, 2002/06/20 16:31:06
Line 16 Line 16
   That renaming is needed for SQL drivers to be able to find     That renaming is needed for SQL drivers to be able to find 
   necessary include-file in Parser3 sources.    necessary include-file in Parser3 sources.
   
   NOTE: on some system you sould run 'gmake'.    NOTE:
     On some system you should run 'gmake'.
   
     NOTE:
   By default your would get 'parser3' binary without support of these features:    By default your would get 'parser3' binary without support of these features:
         * xml(xdoc and xnode classes)          * xml(xdoc and xnode classes)
     Read section (3) on getting xml-abled parser.
   
   
   In case you're not root on machine you're installing Parser,    Read section (4) on configure options.
   we recommend you to do:  
   ./configure --prefix=/your/home/parser3install  
   and afterwards copy parser3install/bin/parser3 to your CGI directory  
   or make a symlink [if your web server configured to follow symlinks].  
   
 2.What is the process to install Parser3?  2.What is the process to install Parser3?
   
Line 35 Line 34
   Installation layout:    Installation layout:
     $prefix/bin/      $prefix/bin/
       parser3             -- CGI and command line Parser3 interpreter        parser3             -- CGI and command line Parser3 interpreter
         auto.p.dist         -- configuration file sample, 
                                copy it to auto.p and adjust to your needs
     $prefix/etc/      $prefix/etc/
       parser3.conf        -- main configuration file  
       parser3.charsets/   -- charset definition files        parser3.charsets/   -- charset definition files
         koi8-r.cfg        -- cyrillic charset [KOI8-R encoding]          koi8-r.cfg        -- cyrillic charset [KOI8-R encoding]
         windows-1250.cfg  -- central europian charset [windows-1250 encoding]          windows-1250.cfg  -- central europian charset [windows-1250 encoding]
         windows-1251.cfg  -- cyrillic charset [windows-1251 encoding]          windows-1251.cfg  -- cyrillic charset [windows-1251 encoding]
         windows-1257.cfg  -- baltic charset [windows-1257 encoding]          windows-1257.cfg  -- baltic charset [windows-1257 encoding]
   
   NOTE:  3.What other libraries are needed to compile/install parser? 
     For subsequent compilations+installs   
     to prevent configuration files to be overwritten use  
     
     make install-exec  
       
     it will update parser3 binary only.  
   
 2.What other libraries are needed to compile/install libxml ?   
   
   * You can compile and use parser without any additional libraries.    * You can compile and use parser without any additional libraries.
     That would be 'basic' version of it.      That would be 'basic' version of it.
   
   
   * In case you wish xml(xdoc and xnode classes) support you need libraries    * In case you wish xml(xdoc and xnode classes) support you need libraries
       libxml2 >= 2.3.6        libxml2 >= 2.4.11
       libxslt >= 1.0.9        libxslt >= 1.0.9
       glib >= 1.2.10        glib >= 1.2.10
       gdome2 >= 0.7.0        gdome2 >= 0.7.0
Line 70 Line 62
   
     Installation sequence of these libraries to $D/gnome:      Installation sequence of these libraries to $D/gnome:
   
     libxml2:       libxml2:  [ftp://ftp.gnome.org/pub/GNOME/stable/sources/libxml/libxml2-2.4.12.tar.gz]
   
     cd libxml2-x.x.x      cd libxml2-x.x.x
     patch -p0 < $D/parser3project/parser3/src/patches/libxml_error_column_tab.patch      patch -p0 < $D/parser3project/parser3/src/patches/libxml_error_column_tab.patch
Line 79 Line 71
     patch -p0 < $D/parser3project/parser3/src/patches/libxml_transcoder_context2.patch      patch -p0 < $D/parser3project/parser3/src/patches/libxml_transcoder_context2.patch
     patch -p0 < $D/parser3project/parser3/src/patches/libxml_transcoder_context3.patch      patch -p0 < $D/parser3project/parser3/src/patches/libxml_transcoder_context3.patch
     patch -p0 < $D/parser3project/parser3/src/patches/libxml_transcoder_context4.patch      patch -p0 < $D/parser3project/parser3/src/patches/libxml_transcoder_context4.patch
     ./configure --prefix=$D/gnome      ./configure --prefix=$D/gnome --without-zlib
     make install      make install
   
     libxslt:      libxslt:  [ftp://ftp.gnome.org/pub/GNOME/stable/sources/libxslt/libxslt-1.0.9.tar.gz]
   
     cd libxslt-x.x.x      cd libxslt-x.x.x
     patch -p0 < $D/parser3project/parser3/src/patches/libxslt_html_output_no_charset_meta.patch      patch -p0 < $D/parser3project/parser3/src/patches/libxslt_html_output_no_charset_meta.patch
     ./configure --with-libxml-prefix=$D/gnome --prefix=$D/gnome --without-debug --without-debugger      ./configure --with-libxml-prefix=$D/gnome --prefix=$D/gnome --without-debug --without-debugger
     make install      make install
   
     glib: [ftp://ftp.gtk.org/pub/gtk/v1.2/glib-1.2.10.tar.gz]      glib:  [ftp://ftp.gtk.org/pub/gtk/v1.2/glib-1.2.10.tar.gz]
   
     cd glib-x.x.x      cd glib-x.x.x
     ./configure --prefix=$D/gnome       ./configure --prefix=$D/gnome 
     make install      make install
   
     gdome2:      gdome2:  [http://phd.cs.unibo.it/gdome2/tarball/gdome2-0.7.0.tar.gz]
   
       cd gdome2-x.x.x
           patch -p0 < $D/parser3project/parser3/src/patches/libgdome_cpp_syntax1.patch
           patch -p0 < $D/parser3project/parser3/src/patches/libgdome_cpp_syntax2.patch
           patch -p0 < $D/parser3project/parser3/src/patches/libgdome_morestatic.patch
     ./configure --with-glib-prefix=$D/gnome --disable-glibtest --with-libxml-prefix=$D/gnome --prefix=$D/gnome      ./configure --with-glib-prefix=$D/gnome --disable-glibtest --with-libxml-prefix=$D/gnome --prefix=$D/gnome
     make install      make install
   
     And patch+copy these additional headers into install includes directory      And copy these additional headers into install includes directory
   
         patch -p0 < $D/parser3project/parser3/src/patches/libgdome_cpp_syntax1.patch  
         patch -p0 < $D/parser3project/parser3/src/patches/libgdome_cpp_syntax2.patch  
     mkdir $D/gnome/include/libgdome/gdomecore      mkdir $D/gnome/include/libgdome/gdomecore
     cp libgdome/gdomecore/gdome-xml-node.h $D/gnome/include/libgdome/gdomecore      cp libgdome/gdomecore/gdome-xml-node.h $D/gnome/include/libgdome/gdomecore
     cp libgdome/gdomecore/gdome-xml-document.h $D/gnome/include/libgdome/gdomecore      cp libgdome/gdomecore/gdome-xml-document.h $D/gnome/include/libgdome/gdomecore
           
   
     Parser3 configure option:      Parser3 configure options, choose whether you need static or dynamic linkage with xml libs:
         --with-gnome-xml=$D/gnome          --with-static-xml=$D/gnome
           --with-shared-xml=$D/gnome
   
     NOTE:      NOTE:
     In case your glib as installed into some other prefix,      In case your glib as installed into some other prefix,
     specify it's configuration file with      specify it's configuration file with
         --with-glib-config=/path/to/your/glib-config          --with-glib-config=/path/to/your/glib-config
           NOTE:
           In case you are using SHARED xml libraries, you may want to link in direct path to them,
       use this key to specify which linker key to use do do that:
           --with-pathlink=LKEY    put dynamic libraries paths to binary
                                   using linker key (-R, -rpath-link)
   
   4.
   
     In case you're not root on machine you're installing Parser,
     we recommend you to do:
     ./configure --prefix=/your/home/parser3install
     and afterwards copy parser3install/bin/parser3 to your CGI directory
     or make a symlink [if your web server configured to follow symlinks].
   
     You can disable libstdc++ linkage by setting
     --disable-link-libstdcpp
     option to configure.  
   
     You can disable any exec operations by setting
     --disable-execs
     option to configure.
     file::exec, file::cgi and mail:send (unix version) methods would be disabled.
   
     You can disable reading and executing files, belonging to group 
     other then current by setting
     --disable-foreign-group-files
     option to configure.
     
     You can disable user-configured sendmail commands by forcing it, setting
     "--with=sendmail=COMMAND"
     option to configure.
     
   
     Some root config options can be specified at configure time, and would override autodetects.
   
     List of enabled charsets:
     --with-charsets=CHARSET[,CHARSET,...]  Enables charsets in root config (windows-1251,
                             windows-1250 windows-1257 koi8-r; Default is windows-1251)
     SQL clients:
     --with-mysql-client=mysqlclientlib?params
     --with-pgsql-client=pgsqlclientlib?params
     --with-oracle-client=oracleclientlib?params
     
     
 Alexandr Petrosian <paf@design.ru> (http://paf.design.ru)  Alexandr Petrosian <paf@design.ru> (http://paf.design.ru)
   
Removed from v.1.7  
changed lines
  Added in v.1.21.2.1

E-mail: