[BACK]Return to INSTALL CVS log [TXT] [DIR] Up to [parser3project] / parser3

Diff for /parser3/INSTALL between versions 1.35 and 1.54

version 1.35, 2004/02/10 10:41:52 version 1.54, 2009/08/01 04:59:09
Line 1 Line 1
 0.Assuming your perform your builds in $HOME directory   Alexander Petrosian <paf@design.ru> (http://paf.design.ru)
   and suggested subdirectories.  $Id$
   
 1.What is the process to compile Parser3?  1.What is the process to compile Parser3?
   
   First, you must have LIBGC installed (conservative garbage collector for C++).    Just start ./buildall-with-xml script and you would get $HOME/parser3install/bin/parser3 binary.
       libgc >= 6.1 [http://www.hpl.hp.com/personal/Hans_Boehm/gc/gc_source/gc6.1.tar.gz]  
       
     Installation sequence of this library to $HOME/gc:  
   
     cd libgc-x.x  
     ./configure --prefix=$HOME/gc --disable-threads --silent  
     make install  
   
     Then you can use these Parser3 configure options to specify the location and static/dynamic linkage with libgc:  
         --with-static-gc=$HOME/gc/lib  
         --with-shared-gc=$HOME/gc/lib  
   
   As most UNIX programs Parser3 follows the "standard":  
   
   mkdir $HOME/parser3project  
   cd $HOME/parser3project  
   gunzip -c parser3-x.x.tar.gz | tar xvf -  
   mv parser3-x.x parser3  
   cd parser3  
   ./configure --prefix=/usr/local  
   make  
     
   That renaming is needed for SQL drivers to be able to find   
   necessary include-file in Parser3 sources.  
   
   NOTE:    NOTE:
   On some system you should run 'gmake'.    In case you do not need XML support, use ./buildall-without-xml
   
   NOTE:    NOTE:
   By default your would get 'parser3' binary without support of these features:    On some platforms there is special version of libgc patched to support some
         * xml(xdoc and xnode classes)    local piece of subtlety.
   Read section (3) on getting xml-abled parser.    Official libgc does not work there, use special version instead.
     (OpenBSD reported to be one of those)
     If you need that special version, please change buildall script accordingly.
   
     NOTE:
     In case you later would experience problems with gcc runtime exception handling
     (most notable when reporting sql-related problems),
     add this to configure line in buildall script:
     --with-sjlj-exceptions
     (HPUX is reported to have such problems)
   
   Read section (4) on configure options.    NOTE:
     On some systems there are no "make" and you should run 'gmake', change buildall script accordingly then.
   
 2.What is the process to install Parser3?  2.What is the process to install Parser3?
   
   make install    Copy files from $HOME/parser3install directory into your cgi-bin directory.
   
   Installation layout:    Then install Parser3 as a handler of documents, step-by-step instrunctions:
     $prefix/bin/      http://www.parser.ru/en/docs/lang/install4apachecgi.htm" in English
       http://www.parser.ru/docs/lang/install4apachecgi.htm" in Russian
   
     Directory layout:
       bin/
       parser3             -- CGI and command line Parser3 interpreter        parser3             -- CGI and command line Parser3 interpreter
       auto.p.dist         -- configuration file sample,         auto.p.dist         -- configuration file sample, 
                              copy it to auto.p and adjust to your needs                               copy it to auto.p and adjust to your needs
     $prefix/etc/      etc/
       parser3.charsets/   -- charset definition files        parser3.charsets/   -- charset definition files
         koi8-r.cfg        -- cyrillic charset [KOI8-R encoding]          koi8-r.cfg        -- cyrillic charset [KOI8-R encoding]
         windows-1250.cfg  -- central europian charset [windows-1250 encoding]          windows-1250.cfg  -- central europian charset [windows-1250 encoding]
         windows-1251.cfg  -- cyrillic charset [windows-1251 encoding]          windows-1251.cfg  -- cyrillic charset [windows-1251 encoding]
         windows-1257.cfg  -- baltic charset [windows-1257 encoding]          windows-1257.cfg  -- baltic charset [windows-1257 encoding]
   
 3.What other libraries are needed to compile/install parser?   3.I have heard about $mail:receive experimental support, how do I use it?
     You need to bulid these additional libraries
 3a. In case you wish XML(xdoc and xnode classes) support, you need libraries        glib >= 1.2.10
       libxml2 >= 2.6.5 [ftp://xmlsoft.org/libxml2-2.6.5.tar.gz]        gmime >= 1.0.1 [http://spruce.sourceforge.net/gmime/sources/v1.0/gmime-1.0.8.tar.gz]
       libxslt >= 1.1.2 [ftp://xmlsoft.org/libxslt-1.1.2.tar.gz]  
       glib >= 1.2.10 [ftp://ftp.gtk.org/pub/gtk/v1.2/glib-1.2.10.tar.gz]  
       gdome2 >= 0.7.4 [http://gdome2.cs.unibo.it/tarball/gdome2-0.7.4.tar.gz]  
     on your system, and specify path to them to Parser3 configure script.  
   
     Sources of libgdome library must be patched prior to compile. [library author bug confirmation pending]  
   
     Installation sequence of these libraries to $HOME/gnome:  
   
     libxml2:  
   
     cd libxml2-x.x.x  
     ./configure --prefix=$HOME/gnome --without-zlib --without-iconv --silent  
     make install  
   
     libxslt:  
   
     cd libxslt-x.x.x  
     ./configure --with-libxml-prefix=$HOME/gnome --prefix=$HOME/gnome --without-debug --without-debugger --silent  
     make install  
   
     glib:  
   
     cd glib-x.x.x  
     ./configure --prefix=$HOME/gnome   
     make install  
   
     gdome2:  
   
     cd gdome2-x.x.x  
     patch -p0 < $HOME/parser3project/parser3/src/lib/patches/gdome2.patch  
     ./configure --with-glib-prefix=$HOME/gnome --disable-glibtest --with-libxml-prefix=$HOME/gnome --prefix=$HOME/gnome --silent  
     make install  
   
     And copy these additional headers into install includes directory  
   
     mkdir $HOME/gnome/include/libgdome/gdomecore  
     cp libgdome/gdomecore/gdome-xml-node.h $HOME/gnome/include/libgdome/gdomecore  
     cp libgdome/gdomecore/gdome-xml-document.h $HOME/gnome/include/libgdome/gdomecore  
       
   
     Parser3 configure options, choose whether you need static or dynamic linkage with xml libs:  
         --with-static-xml=$HOME/gnome  
         --with-shared-xml=$HOME/gnome  
   
     NOTE:  
     In case your glib as installed into some other prefix,  
     specify it's configuration file with  
         --with-glib-config=/path/to/your/glib-config  
     NOTE:  
     In case you are using SHARED xml libraries, you may want to link in direct path to them,  
     use this key to specify which linker key to use do do that:  
         --with-pathlink=LKEY    put dynamic libraries paths to binary  
                                 using linker key (-R, -rpath-link)  
   
 3b. In case you wish $mail:receive support you need libraries  
       glib >= 1.2.10 [ftp://ftp.gtk.org/pub/gtk/v1.2/glib-1.2.10.tar.gz]  
       gmime >= 1.0.1 [http://spruce.sourceforge.net/gmime/sources/gmime-1.0.5.tar.gz]  
     on your system, and specify path to them to Parser3 configure script.      on your system, and specify path to them to Parser3 configure script.
   
     You may have already installed glib at 3b step.  
   
     glib:      glib:
   
     cd glib-x.x.x      cd $HOME/parser3project/src
     ./configure --prefix=$HOME/gnome       #on freebsd5 this is reported to work: ftp://ftp.gtk.org/pub/gtk/v1.1/glib-1.1.16.tar.gz
       wget --passive-ftp ftp://ftp.gtk.org/pub/gtk/v1.2/glib-1.2.10.tar.gz
       gunzip -c glib-1.2.10.tar.gz | tar vxf -
       cd glib-1.2.10
       ./configure --prefix=$HOME/parser3project/gnome --silent
     make install      make install
   
     gmime:      gmime:
   
     cd gmime-x.x.x      cd gmime-x.x.x
     ./configure --prefix=$HOME/gnome      ./configure --prefix=$HOME/parser3project/gnome
     make install      make install
   
     Parser3 configure options, choose whether you need static or dynamic linkage with xml libs:      Then you need to change buildall script to add this to parser3 configure line:
         --with-static-mailreceive=$HOME/gnome          --with-static-mailreceive=$HOME/parser3project/gnome
         --with-shared-mailreceive=$HOME/gnome      And start that changed ./buildall.
   
     NOTE:      NOTE:
     In case your glib as installed into some other prefix,      In case your glib as installed into some other prefix,
Line 148 Line 82
         --with-pathlink=LKEY    put dynamic libraries paths to binary          --with-pathlink=LKEY    put dynamic libraries paths to binary
                                 using linker key (-R, -rpath-link)                                  using linker key (-R, -rpath-link)
   
 4.  4.Security issues
   
   In case you're not root on machine you're installing Parser,  
   we recommend you to do:  
   ./configure --prefix=/your/home/parser3install  
   and afterwards copy parser3install/bin/parser3 to your CGI directory  
   or make a symlink [if your web server configured to follow symlinks].  
   
   You can disable any exec operations by setting    You can disable any exec operations by setting
   --disable-execs    --disable-execs
   option to configure.    option to configure.
Line 168 Line 95
       
   You can disable user-configured sendmail commands by forcing it, setting    You can disable user-configured sendmail commands by forcing it, setting
   "--with=sendmail=COMMAND"    "--with=sendmail=COMMAND"
   option to configure.    option to configure, for example:
     "--with-sendmail=/usr/sbin/sendmail -i -t -f postmaster"
   In case you are experiencing problem with gcc runtime exception handling,  
   try to configure with  
   --with-sjlj-exceptions  
   option.    
   
   By default libstdc++ is linked statically, you can re-enable dynamic libstdc++ linkage by specifying    By default libstdc++ is linked statically, you can re-enable dynamic libstdc++ linkage by specifying
   --with-dynamic-stdcpp    --with-dynamic-stdcpp
Line 190 Line 113
   --with-pgsql-client=pgsqlclientlib?params    --with-pgsql-client=pgsqlclientlib?params
   --with-oracle-client=oracleclientlib?params    --with-oracle-client=oracleclientlib?params
       
    5.
 Alexandr Petrosian <paf@design.ru> (http://paf.design.ru)    If you need to build apache 1.3 parser module, get source distribution of apache 1.3,
     run configure there, then run parser configure with one more option:
     --with-apache13=Apache13 source distribution directory
     after 'make' go to that directory and run
   
     ./p3runConfigure <any additional options to apache configure to pass>
     
     example:
     ./p3runConfigure --prefix=$HOME/apache13install --enable-module=rewrite
   
     WARNING: if you want to use apache configure option --enable-shared=max, do this:
     ./p3runConfigure --enable-shared=max --disable-shared=mod_parser3.c
   
   6.
     Since Parser 3.4.0 the several optimisations were implemented.
     If you experience problems you can try to disable them by commenting corresponding defines and recompiling parser3.
   
     src/include/pa_opcode.h
       #define OPTIMIZE_BYTECODE_GET_CLASS               -- $a:
       #define OPTIMIZE_BYTECODE_GET_ELEMENT             -- $a ^a
       #define OPTIMIZE_BYTECODE_GET_OBJECT_ELEMENT      -- $a.b ^a.b
       #define OPTIMIZE_BYTECODE_GET_OBJECT_VAR_ELEMENT  -- $a.$b ^a.$b
       #define OPTIMIZE_BYTECODE_GET_SELF_ELEMENT        -- $self.a ^self.a
       #define OPTIMIZE_BYTECODE_CONSTRUCT               -- $a(expr),  $a[value]
                                                            $.a(expr), $.a[value]
                                                            $self.a(expr), $self.a[value]
       #define OPTIMIZE_BYTECODE_CUT_REM_OPERATOR        -- cut rem operator with any number of params during compilation
       #define OPTIMIZE_BYTECODE_STRING_POOL             -- simplifying string's bytecode into expression
   
     src/include/pa_string.h
       #define HASH_CODE_CACHING  -- calculated hash codes are cached and used for sequential hash lookups
   
     src/include/pa_memory.h
       #define USE_DESTRUCTORS    -- destructors are used to decrease memory consumption during code
                                     processing and make ^memory:compact[] calls non-essential.
   
     src/types/pa_method.h
       #define OPTIMIZE_CALL      -- allows faster operators execution by eliminating method frame
                                     with local variables creation and extra write context switches.
       #define OPTIMIZE_RESULT    -- parser methods are marked when the $result variable was used.
                                     This allows write operations and context switching optimization.
   
     src/types/pa_wwrapper.h
       #define OPTIMIZE_SINGLE_STRING_WRITE  -- reuse original VString in single string assignments.
   
     src/lib/cord/include/cord.h
       #define CORD_CAT_OPTIMIZATION -- CORD library never modifies source concatenations. But in parser
                                        write operations it is safe to modify them and save some memory.
       #define CORD_CHARS_CACHE      -- language cords with same language and length are cached and reused.
   
     src/include/pa_string.h
       #define STRING_LENGTH_CACHING -- cache String::Body.length() for char* strings
   
     src/include/pa_hash.h
       #define HASH_ORDER            -- hash keys are iterated in the order of insertion
   
 $Id$  
Removed from v.1.35  
changed lines
  Added in v.1.54

E-mail: