--- parser3/buildall	2013/10/16 21:25:24	1.11
+++ parser3/buildall	2020/12/16 20:37:16	1.34
@@ -1,5 +1,5 @@
 #!/bin/sh
-# $Id: buildall,v 1.11 2013/10/16 21:25:24 moko Exp $
+# $Id: buildall,v 1.34 2020/12/16 20:37:16 moko Exp $
 
 install_directory=$HOME/parser3install
 sendmail_command="/usr/sbin/sendmail -i -t -f postmaster"
@@ -12,36 +12,45 @@ build_xml="yes"
 build_gmime=""
 build_apache=""
 build_stripped=""
+direct_download=""
 
 options="--with-included-ltdl"
 options="$options --with-gc=$project_dir/gc/lib"
 options="$options --with-pcre=$project_dir/pcre"
 #options="$options --disable-stringstream"
 
-echo "Building statically linked parser3\c"
+printf "Building statically linked parser3"
 for PARAM in "$@"; do
     case "$PARAM" in
 	"--without-xml")
-	    echo ", without xml\c"
+	    printf ", without xml"
 	    build_xml=""
 	    ;;
 	"--with-apache")
-	    echo ", with apache module\c"
+	    printf ", with apache module"
 	    options="$options --with-apache"
 	    build_apache="yes"
 	    ;;
 	"--with-mailreceive")
-	    echo ", with mail receiving\c"
+	    printf ", with mail receiving"
 	    options="$options --with-mailreceive=$project_dir/gnome"
 	    build_gmime="yes"
 	    ;;
+	"--with-system-mailreceive")
+	    printf ", with mail receiving"
+	    options="$options --with-mailreceive"
+	    ;;
 	"--strip")
-	    echo ", without debug information\c"
+	    printf ", without debug information"
 	    build_stripped="yes"
 	    ;;
+	"--direct-download")
+	    printf ", download sources from master"
+	    direct_download="yes"
+	    ;;
 	"--help")
 	    echo
-	    echo "Usage: buildall [--without-xml] [--with-apache] [--with-mailreceive] [--strip] [--disable-safe-mode] [other configure options ...]"
+	    echo "Usage: buildall [--without-xml] [--with-apache] [--with-mailreceive] [--with-system-mailreceive] [--strip] [--direct-download] [--disable-safe-mode] [other configure options ...]"
 	    exit 1
 	    ;;
 	*)
@@ -74,30 +83,31 @@ fi
 
 ############################### Support functions ################################
 
-prepare_gz () {
+prepare () {
     cd $project_dir/src
 
     if test ! -f "$1"; then
-	echo "Downloading $lib..."
-	$download $2$1
+	if test "$direct_download" = "yes"; then
+	    echo "Downloading $lib from $2..."
+	    $download $2$1
+	else
+	    echo "Downloading $lib (master at $2)..."
+	    $download https://www.parser.ru/off-line/download/libs/$1
+	fi
     fi
 
     echo "Unpacking $lib..."
     rm -rf $lib
+}
+
+prepare_gz () {
+    prepare $1 $2
     gunzip -c $1 | tar xf - >/dev/null
     cd $lib
 }
 
 prepare_xz () {
-    cd $project_dir/src
-
-    if test ! -f "$1"; then
-	echo "Downloading $lib..."
-	$download $2$1
-    fi
-
-    echo "Unpacking $lib..."
-    rm -rf $lib
+    prepare $1 $2
     xzcat $1 | tar xf - >/dev/null
     cd $lib
 }
@@ -113,13 +123,17 @@ echo
 mkdir src >/dev/null 2>&1
 
 if test ! -f "$project_dir/gc/lib/libgc.a"; then
-#   libgc="gc6.8" # FreeBSD 4.X is not supported in newer gc version
-    lib="gc-7.2"
-    prepare_gz ${lib}d.tar.gz http://www.hpl.hp.com/personal/Hans_Boehm/gc/gc_source/
+    lib="libatomic_ops-7.6.2"
+    prepare_gz ${lib}.tar.gz http://www.hboehm.info/gc/gc_source/
+
+    lib="gc-8.0.4"
+    prepare_gz ${lib}.tar.gz http://www.hboehm.info/gc/gc_source/
+
+    mv ../libatomic_ops-7.6.2 libatomic_ops
+
     echo "Configuring $lib..."
-    CPPFLAGS="-DUSE_LIBC_PRIVATES -DUSE_MMAP -DDONT_ADD_BYTE_AT_END" \
+    CPPFLAGS="-DUSE_MMAP -DDONT_ADD_BYTE_AT_END" \
     ./configure --prefix=$project_dir/gc \
-	--disable-threads \
 	--disable-shared \
 	--silent $cflags
     echo "Building $lib..."
@@ -128,8 +142,8 @@ if test ! -f "$project_dir/gc/lib/libgc.
 fi
 
 if test ! -f "$project_dir/pcre/lib/libpcre.a"; then
-    lib="pcre-8.33"
-    prepare_gz $lib.tar.gz ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/
+    lib="pcre-8.43"
+    prepare_gz $lib.tar.gz https://ftp.pcre.org/pub/pcre/
     echo "Configuring $lib..."
     ./configure --prefix="$project_dir/pcre" \
 	--with-match-limit-recursion=10000 \
@@ -146,14 +160,13 @@ if test ! -f "$project_dir/pcre/lib/libp
 fi
 
 if test "$build_xml" = "yes" -a ! -f "$project_dir/gnome/lib/libxml2.a"; then
-    lib="libxml2-2.9.1"
+    lib="libxml2-2.9.9"
     prepare_gz $lib.tar.gz ftp://xmlsoft.org/libxml2/
     #sax1, output, tree, xinclude[in libxslt], html[in libxslt, mode=html?], xptr[xinclude], pattern -- needed!
     echo "Configuring $lib..."
     ./configure --prefix=$project_dir/gnome \
 	--without-catalog \
 	--without-iconv \
-	--without-threads \
 	--without-debug \
 	--without-iso8859x \
 	--without-legacy \
@@ -178,9 +191,10 @@ if test "$build_xml" = "yes" -a ! -f "$p
 fi
 
 if test "$build_xml" = "yes" -a ! -f "$project_dir/gnome/lib/libxslt.a"; then
-    lib="libxslt-1.1.28"
+    lib="libxslt-1.1.34"
     prepare_gz $lib.tar.gz ftp://xmlsoft.org/libxslt/
     echo "Configuring $lib..."
+    CFLAGS="$CFLAGS -D__stub_clock_gettime -Dclock_gettime=choke_me" \
     ./configure --prefix=$project_dir/gnome \
 	--with-libxml-prefix=$project_dir/gnome \
 	--without-debug \
@@ -246,7 +260,11 @@ fi
 cd $parser3_dir
 if test ! -f "Makefile"; then
     echo "Configuring parser3..."
-    ./configure --prefix=$install_directory "--with-sendmail=$sendmail_command" $options --silent $cflags $gmime_cflags
+    ./configure --prefix=$install_directory \
+	--sysconfdir=$install_directory/bin \
+	--datadir=$install_directory/bin \
+	--with-sendmail="$sendmail_command" \
+	$options $cflags $gmime_cflags
 fi
 
 echo "Building parser3..."