Annotation of parser3/src/lib/cord/Makefile.in, revision 1.3
1.2 paf 1: # Makefile.in generated by automake 1.7.2 from Makefile.am.
2: # @configure_input@
3:
4: # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
5: # Free Software Foundation, Inc.
6: # This Makefile.in is free software; the Free Software Foundation
7: # gives unlimited permission to copy and/or distribute it,
8: # with or without modifications, as long as this notice is preserved.
9:
10: # This program is distributed in the hope that it will be useful,
11: # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12: # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13: # PARTICULAR PURPOSE.
14:
15: @SET_MAKE@
16:
17: srcdir = @srcdir@
18: top_srcdir = @top_srcdir@
19: VPATH = @srcdir@
20: pkgdatadir = $(datadir)/@PACKAGE@
21: pkglibdir = $(libdir)/@PACKAGE@
22: pkgincludedir = $(includedir)/@PACKAGE@
23: top_builddir = ../../..
24:
25: am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
26: INSTALL = @INSTALL@
27: install_sh_DATA = $(install_sh) -c -m 644
28: install_sh_PROGRAM = $(install_sh) -c
29: install_sh_SCRIPT = $(install_sh) -c
30: INSTALL_HEADER = $(INSTALL_DATA)
31: transform = $(program_transform_name)
32: NORMAL_INSTALL = :
33: PRE_INSTALL = :
34: POST_INSTALL = :
35: NORMAL_UNINSTALL = :
36: PRE_UNINSTALL = :
37: POST_UNINSTALL = :
38: host_triplet = @host@
39: ACLOCAL = @ACLOCAL@
40: AMDEP_FALSE = @AMDEP_FALSE@
41: AMDEP_TRUE = @AMDEP_TRUE@
42: AMTAR = @AMTAR@
43: APACHE13 = @APACHE13@
44: AUTOCONF = @AUTOCONF@
45: AUTOHEADER = @AUTOHEADER@
46: AUTOMAKE = @AUTOMAKE@
47: AWK = @AWK@
48: CC = @CC@
49: CCDEPMODE = @CCDEPMODE@
50: CFLAGS = @CFLAGS@
51: COMPILE_APACHE13_MODULE_FALSE = @COMPILE_APACHE13_MODULE_FALSE@
52: COMPILE_APACHE13_MODULE_TRUE = @COMPILE_APACHE13_MODULE_TRUE@
53: CPP = @CPP@
54: CPPFLAGS = @CPPFLAGS@
55: CPP_LIBS = @CPP_LIBS@
56: CXX = @CXX@
57: CXXDEPMODE = @CXXDEPMODE@
58: CXXFLAGS = @CXXFLAGS@
59: CYGPATH_W = @CYGPATH_W@
60: DEFS = @DEFS@
61: DEPDIR = @DEPDIR@
62: ECHO_C = @ECHO_C@
63: ECHO_N = @ECHO_N@
64: ECHO_T = @ECHO_T@
65: EGREP = @EGREP@
66: EXEEXT = @EXEEXT@
67: GC_LIBS = @GC_LIBS@
68: INCLTDL = @INCLTDL@
69: INSTALL_DATA = @INSTALL_DATA@
70: INSTALL_PROGRAM = @INSTALL_PROGRAM@
71: INSTALL_SCRIPT = @INSTALL_SCRIPT@
72: INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
73: LDFLAGS = @LDFLAGS@
74: LIBADD_DL = @LIBADD_DL@
75: LIBLTDL = @LIBLTDL@
76: LIBOBJS = @LIBOBJS@
77: LIBS = @LIBS@
78: LTLIBOBJS = @LTLIBOBJS@
79: MAKEINFO = @MAKEINFO@
80: MIME_INCLUDES = @MIME_INCLUDES@
81: MIME_LIBS = @MIME_LIBS@
82: OBJEXT = @OBJEXT@
83: P3S = @P3S@
84: PACKAGE = @PACKAGE@
85: PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
86: PACKAGE_NAME = @PACKAGE_NAME@
87: PACKAGE_STRING = @PACKAGE_STRING@
88: PACKAGE_TARNAME = @PACKAGE_TARNAME@
89: PACKAGE_VERSION = @PACKAGE_VERSION@
90: PATH_SEPARATOR = @PATH_SEPARATOR@
91: RANLIB = @RANLIB@
92: SET_MAKE = @SET_MAKE@
93: SHELL = @SHELL@
94: STRIP = @STRIP@
95: VERSION = @VERSION@
96: XML_INCLUDES = @XML_INCLUDES@
97: XML_LIBS = @XML_LIBS@
98: YACC = @YACC@
99: ac_ct_CC = @ac_ct_CC@
100: ac_ct_CXX = @ac_ct_CXX@
101: ac_ct_RANLIB = @ac_ct_RANLIB@
102: ac_ct_STRIP = @ac_ct_STRIP@
103: am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
104: am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
105: am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
106: am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
107: am__include = @am__include@
108: am__quote = @am__quote@
109: bindir = @bindir@
110: build = @build@
111: build_alias = @build_alias@
112: build_cpu = @build_cpu@
113: build_os = @build_os@
114: build_vendor = @build_vendor@
115: charsetsdir = @charsetsdir@
116: commentcharset_koi8r = @commentcharset_koi8r@
117: commentcharset_windows1250 = @commentcharset_windows1250@
118: commentcharset_windows1251 = @commentcharset_windows1251@
119: commentcharset_windows1257 = @commentcharset_windows1257@
120: datadir = @datadir@
121: dll_extension = @dll_extension@
122: exec_prefix = @exec_prefix@
123: host = @host@
124: host_alias = @host_alias@
125: host_cpu = @host_cpu@
126: host_os = @host_os@
127: host_vendor = @host_vendor@
128: includedir = @includedir@
129: infodir = @infodir@
130: install_sh = @install_sh@
131: libdir = @libdir@
132: libexecdir = @libexecdir@
133: localstatedir = @localstatedir@
134: mandir = @mandir@
135: mysql_client = @mysql_client@
136: oldincludedir = @oldincludedir@
137: oracle_client = @oracle_client@
138: pgsql_client = @pgsql_client@
139: prefix = @prefix@
140: program_transform_name = @program_transform_name@
141: sbindir = @sbindir@
142: sharedstatedir = @sharedstatedir@
143: sqldriversdir = @sqldriversdir@
144: subdirs = @subdirs@
145: sysconfdir = @sysconfdir@
146: target_alias = @target_alias@
147: INCLUDES = -I../gc/include -Iinclude
148:
149: noinst_LIBRARIES = libcord.a
150: libcord_a_SOURCES = cordbscs.c cordprnt.c cordxtra.c
151:
1.3 ! paf 152: EXTRA_DIST = cord.vcproj source.url
1.2 paf 153:
154: SUBDIRS = include
155: subdir = src/lib/cord
156: mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
157: CONFIG_HEADER = $(top_builddir)/src/include/pa_config_auto.h
158: CONFIG_CLEAN_FILES =
159: LIBRARIES = $(noinst_LIBRARIES)
160:
161: libcord_a_AR = $(AR) cru
162: libcord_a_LIBADD =
163: am_libcord_a_OBJECTS = cordbscs.$(OBJEXT) cordprnt.$(OBJEXT) \
164: cordxtra.$(OBJEXT)
165: libcord_a_OBJECTS = $(am_libcord_a_OBJECTS)
166:
167: DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/src/include
168: depcomp = $(SHELL) $(top_srcdir)/depcomp
169: am__depfiles_maybe = depfiles
170: @AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/cordbscs.Po ./$(DEPDIR)/cordprnt.Po \
171: @AMDEP_TRUE@ ./$(DEPDIR)/cordxtra.Po
172: COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
173: $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
174: CCLD = $(CC)
175: LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
176: DIST_SOURCES = $(libcord_a_SOURCES)
177:
178: RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \
179: ps-recursive install-info-recursive uninstall-info-recursive \
180: all-recursive install-data-recursive install-exec-recursive \
181: installdirs-recursive install-recursive uninstall-recursive \
182: check-recursive installcheck-recursive
183: DIST_COMMON = Makefile.am Makefile.in
184: DIST_SUBDIRS = $(SUBDIRS)
185: SOURCES = $(libcord_a_SOURCES)
186:
187: all: all-recursive
188:
189: .SUFFIXES:
190: .SUFFIXES: .c .o .obj
191: $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
192: cd $(top_srcdir) && \
193: $(AUTOMAKE) --gnu src/lib/cord/Makefile
194: Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
195: cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
196:
197: AR = ar
198:
199: clean-noinstLIBRARIES:
200: -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
201: libcord.a: $(libcord_a_OBJECTS) $(libcord_a_DEPENDENCIES)
202: -rm -f libcord.a
203: $(libcord_a_AR) libcord.a $(libcord_a_OBJECTS) $(libcord_a_LIBADD)
204: $(RANLIB) libcord.a
205:
206: mostlyclean-compile:
207: -rm -f *.$(OBJEXT) core *.core
208:
209: distclean-compile:
210: -rm -f *.tab.c
211:
212: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cordbscs.Po@am__quote@
213: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cordprnt.Po@am__quote@
214: @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cordxtra.Po@am__quote@
215:
216: distclean-depend:
217: -rm -rf ./$(DEPDIR)
218:
219: .c.o:
220: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
221: @am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
222: @am__fastdepCC_TRUE@ then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
223: @am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
224: @am__fastdepCC_TRUE@ fi
225: @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
226: @AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
227: @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
228: @am__fastdepCC_FALSE@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
229:
230: .c.obj:
231: @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
232: @am__fastdepCC_TRUE@ -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \
233: @am__fastdepCC_TRUE@ then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
234: @am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
235: @am__fastdepCC_TRUE@ fi
236: @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
237: @AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
238: @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
239: @am__fastdepCC_FALSE@ $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`
240: uninstall-info-am:
241:
242: # This directory's subdirectories are mostly independent; you can cd
243: # into them and run `make' without going through this Makefile.
244: # To change the values of `make' variables: instead of editing Makefiles,
245: # (1) if the variable is set in `config.status', edit `config.status'
246: # (which will cause the Makefiles to be regenerated when you run `make');
247: # (2) otherwise, pass the desired values on the `make' command line.
248: $(RECURSIVE_TARGETS):
249: @set fnord $$MAKEFLAGS; amf=$$2; \
250: dot_seen=no; \
251: target=`echo $@ | sed s/-recursive//`; \
252: list='$(SUBDIRS)'; for subdir in $$list; do \
253: echo "Making $$target in $$subdir"; \
254: if test "$$subdir" = "."; then \
255: dot_seen=yes; \
256: local_target="$$target-am"; \
257: else \
258: local_target="$$target"; \
259: fi; \
260: (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
261: || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
262: done; \
263: if test "$$dot_seen" = "no"; then \
264: $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
265: fi; test -z "$$fail"
266:
267: mostlyclean-recursive clean-recursive distclean-recursive \
268: maintainer-clean-recursive:
269: @set fnord $$MAKEFLAGS; amf=$$2; \
270: dot_seen=no; \
271: case "$@" in \
272: distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
273: *) list='$(SUBDIRS)' ;; \
274: esac; \
275: rev=''; for subdir in $$list; do \
276: if test "$$subdir" = "."; then :; else \
277: rev="$$subdir $$rev"; \
278: fi; \
279: done; \
280: rev="$$rev ."; \
281: target=`echo $@ | sed s/-recursive//`; \
282: for subdir in $$rev; do \
283: echo "Making $$target in $$subdir"; \
284: if test "$$subdir" = "."; then \
285: local_target="$$target-am"; \
286: else \
287: local_target="$$target"; \
288: fi; \
289: (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
290: || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
291: done && test -z "$$fail"
292: tags-recursive:
293: list='$(SUBDIRS)'; for subdir in $$list; do \
294: test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
295: done
296: ctags-recursive:
297: list='$(SUBDIRS)'; for subdir in $$list; do \
298: test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
299: done
300:
301: ETAGS = etags
302: ETAGSFLAGS =
303:
304: CTAGS = ctags
305: CTAGSFLAGS =
306:
307: tags: TAGS
308:
309: ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
310: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
311: unique=`for i in $$list; do \
312: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
313: done | \
314: $(AWK) ' { files[$$0] = 1; } \
315: END { for (i in files) print i; }'`; \
316: mkid -fID $$unique
317:
318: TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
319: $(TAGS_FILES) $(LISP)
320: tags=; \
321: here=`pwd`; \
322: list='$(SUBDIRS)'; for subdir in $$list; do \
323: if test "$$subdir" = .; then :; else \
324: test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
325: fi; \
326: done; \
327: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
328: unique=`for i in $$list; do \
329: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
330: done | \
331: $(AWK) ' { files[$$0] = 1; } \
332: END { for (i in files) print i; }'`; \
333: test -z "$(ETAGS_ARGS)$$tags$$unique" \
334: || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
335: $$tags $$unique
336:
337: ctags: CTAGS
338: CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
339: $(TAGS_FILES) $(LISP)
340: tags=; \
341: here=`pwd`; \
342: list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
343: unique=`for i in $$list; do \
344: if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
345: done | \
346: $(AWK) ' { files[$$0] = 1; } \
347: END { for (i in files) print i; }'`; \
348: test -z "$(CTAGS_ARGS)$$tags$$unique" \
349: || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
350: $$tags $$unique
351:
352: GTAGS:
353: here=`$(am__cd) $(top_builddir) && pwd` \
354: && cd $(top_srcdir) \
355: && gtags -i $(GTAGS_ARGS) $$here
356:
357: distclean-tags:
358: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
359: DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
360:
361: top_distdir = ../../..
362: distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
363:
364: distdir: $(DISTFILES)
365: @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
366: topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
367: list='$(DISTFILES)'; for file in $$list; do \
368: case $$file in \
369: $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
370: $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
371: esac; \
372: if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
373: dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
374: if test "$$dir" != "$$file" && test "$$dir" != "."; then \
375: dir="/$$dir"; \
376: $(mkinstalldirs) "$(distdir)$$dir"; \
377: else \
378: dir=''; \
379: fi; \
380: if test -d $$d/$$file; then \
381: if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
382: cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
383: fi; \
384: cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
385: else \
386: test -f $(distdir)/$$file \
387: || cp -p $$d/$$file $(distdir)/$$file \
388: || exit 1; \
389: fi; \
390: done
391: list='$(SUBDIRS)'; for subdir in $$list; do \
392: if test "$$subdir" = .; then :; else \
393: test -d $(distdir)/$$subdir \
394: || mkdir $(distdir)/$$subdir \
395: || exit 1; \
396: (cd $$subdir && \
397: $(MAKE) $(AM_MAKEFLAGS) \
398: top_distdir="$(top_distdir)" \
399: distdir=../$(distdir)/$$subdir \
400: distdir) \
401: || exit 1; \
402: fi; \
403: done
404: check-am: all-am
405: check: check-recursive
406: all-am: Makefile $(LIBRARIES)
407: installdirs: installdirs-recursive
408: installdirs-am:
409:
410: install: install-recursive
411: install-exec: install-exec-recursive
412: install-data: install-data-recursive
413: uninstall: uninstall-recursive
414:
415: install-am: all-am
416: @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
417:
418: installcheck: installcheck-recursive
419: install-strip:
420: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
421: INSTALL_STRIP_FLAG=-s \
422: `test -z '$(STRIP)' || \
423: echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
424: mostlyclean-generic:
425:
426: clean-generic:
427:
428: distclean-generic:
429: -rm -f Makefile $(CONFIG_CLEAN_FILES)
430:
431: maintainer-clean-generic:
432: @echo "This command is intended for maintainers to use"
433: @echo "it deletes files that may require special tools to rebuild."
434: clean: clean-recursive
435:
436: clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
437:
438: distclean: distclean-recursive
439:
440: distclean-am: clean-am distclean-compile distclean-depend \
441: distclean-generic distclean-tags
442:
443: dvi: dvi-recursive
444:
445: dvi-am:
446:
447: info: info-recursive
448:
449: info-am:
450:
451: install-data-am:
452:
453: install-exec-am:
454:
455: install-info: install-info-recursive
456:
457: install-man:
458:
459: installcheck-am:
460:
461: maintainer-clean: maintainer-clean-recursive
462:
463: maintainer-clean-am: distclean-am maintainer-clean-generic
464:
465: mostlyclean: mostlyclean-recursive
466:
467: mostlyclean-am: mostlyclean-compile mostlyclean-generic
468:
469: pdf: pdf-recursive
470:
471: pdf-am:
472:
473: ps: ps-recursive
474:
475: ps-am:
476:
477: uninstall-am: uninstall-info-am
478:
479: uninstall-info: uninstall-info-recursive
480:
481: .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \
482: clean-generic clean-noinstLIBRARIES clean-recursive ctags \
483: ctags-recursive distclean distclean-compile distclean-depend \
484: distclean-generic distclean-recursive distclean-tags distdir \
485: dvi dvi-am dvi-recursive info info-am info-recursive install \
486: install-am install-data install-data-am install-data-recursive \
487: install-exec install-exec-am install-exec-recursive \
488: install-info install-info-am install-info-recursive install-man \
489: install-recursive install-strip installcheck installcheck-am \
490: installdirs installdirs-am installdirs-recursive \
491: maintainer-clean maintainer-clean-generic \
492: maintainer-clean-recursive mostlyclean mostlyclean-compile \
493: mostlyclean-generic mostlyclean-recursive pdf pdf-am \
494: pdf-recursive ps ps-am ps-recursive tags tags-recursive \
495: uninstall uninstall-am uninstall-info-am \
496: uninstall-info-recursive uninstall-recursive
497:
498: # Tell versions [3.59,3.63) of GNU make to not export all variables.
499: # Otherwise a system limit (for SysV at least) may be exceeded.
500: .NOEXPORT:
E-mail:
![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to Makefile.in CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [parser3project] / parser3 / src / lib / cord