win32/sql/sqlite/include/sqlite3.h - diff

Return to sqlite3.h CVS log

Up to [parser3project] / win32 / sql / sqlite / include

Diff for /win32/sql/sqlite/include/sqlite3.h between versions 1.4 and 1.5

-version 1.4, 2008/04/09 14:16:05
+version 1.5, 2013/10/25 00:42:15
  Line 17
  **
  ** Some of the definitions that are in this file are marked as
  ** "experimental".  Experimental interfaces are normally new
  ** features recently added to SQLite.  We do not anticipate changes
- ** to experimental interfaces but reserve to make minor changes if
+ ** to experimental interfaces but reserve the right to make minor changes
- ** experience from use "in the wild" suggest such changes are prudent.
+ ** if experience from use "in the wild" suggest such changes are prudent.
  **
  ** The official C-language API documentation for SQLite is derived
  ** from comments in this file.  This file is the authoritative source
  Line 29
  ** The makefile makes some minor changes to this file (such as inserting
  ** the version number) and changes its name to "sqlite3.h" as
  ** part of the build process.
- **
- ** @(#) $Id$
  */
  #ifndef _SQLITE3_H_
  #define _SQLITE3_H_
- Line 51  extern "C" {
+ Line 49  extern "C" {
  # define SQLITE_EXTERN extern
  #endif
+ #ifndef SQLITE_API
+ # define SQLITE_API
+ #endif
  /*
- ** Make sure these symbols where not defined by some previous header
+ ** These no-op macros are used in front of interfaces to mark those
- ** file.
+ ** interfaces as either deprecated or experimental.  New applications
+ ** should not use deprecated interfaces - they are support for backwards
+ ** compatibility only.  Application writers should be aware that
+ ** experimental interfaces are subject to change in point releases.
+ **
+ ** These macros used to resolve to various kinds of compiler magic that
+ ** would generate warning messages when they were used.  But that
+ ** compiler magic ended up generating such a flurry of bug reports
+ ** that we have taken it all out and gone back to using simple
+ ** noop macros.
+ */
+ #define SQLITE_DEPRECATED
+ #define SQLITE_EXPERIMENTAL
+ /*
+ ** Ensure these symbols were not defined by some previous header file.
  */
  #ifdef SQLITE_VERSION
  # undef SQLITE_VERSION
- Line 63  extern "C" {
+ Line 81  extern "C" {
  #endif
  /*
- ** CAPI3REF: Compile-Time Library Version Numbers {F10010}
+ ** CAPI3REF: Compile-Time Library Version Numbers
- **
- ** The SQLITE_VERSION and SQLITE_VERSION_NUMBER #defines in
- ** the sqlite3.h file specify the version of SQLite with which
- ** that header file is associated.
- **
- ** The "version" of SQLite is a string of the form "X.Y.Z".
- ** The phrase "alpha" or "beta" might be appended after the Z.
- ** The X value is major version number always 3 in SQLite3.
- ** The X value only changes when  backwards compatibility is
- ** broken and we intend to never break
- ** backwards compatibility.  The Y value is the minor version
- ** number and only changes when
- ** there are major feature enhancements that are forwards compatible
- ** but not backwards compatible.  The Z value is release number
- ** and is incremented with
- ** each release but resets back to 0 when Y is incremented.
  **
- ** See also: [sqlite3_libversion()] and [sqlite3_libversion_number()].
+ ** ^(The [SQLITE_VERSION] C preprocessor macro in the sqlite3.h header
+ ** evaluates to a string literal that is the SQLite version in the
+ ** format "X.Y.Z" where X is the major version number (always 3 for
+ ** SQLite3) and Y is the minor version number and Z is the release number.)^
+ ** ^(The [SQLITE_VERSION_NUMBER] C preprocessor macro resolves to an integer
+ ** with the value (X*1000000 + Y*1000 + Z) where X, Y, and Z are the same
+ ** numbers used in [SQLITE_VERSION].)^
+ ** The SQLITE_VERSION_NUMBER for any given release of SQLite will also
+ ** be larger than the release from which it is derived.  Either Y will
+ ** be held constant and Z will be incremented or else Y will be incremented
+ ** and Z will be reset to zero.
+ **
+ ** Since version 3.6.18, SQLite source code has been stored in the
+ ** <a href="http://www.fossil-scm.org/">Fossil configuration management
+ ** system</a>.  ^The SQLITE_SOURCE_ID macro evaluates to
+ ** a string which identifies a particular check-in of SQLite
+ ** within its configuration management system.  ^The SQLITE_SOURCE_ID
+ ** string contains the date and time of the check-in (UTC) and an SHA1
+ ** hash of the entire source tree.
+ **
+ ** See also: [sqlite3_libversion()],
+ ** [sqlite3_libversion_number()], [sqlite3_sourceid()],
+ ** [sqlite_version()] and [sqlite_source_id()].
+ */
+ #define SQLITE_VERSION        "3.8.1"
+ #define SQLITE_VERSION_NUMBER 3008001
+ #define SQLITE_SOURCE_ID      "2013-10-17 12:57:35 c78be6d786c19073b3a6730dfe3fb1be54f5657a"
+ /*
+ ** CAPI3REF: Run-Time Library Version Numbers
+ ** KEYWORDS: sqlite3_version, sqlite3_sourceid
+ **
+ ** These interfaces provide the same information as the [SQLITE_VERSION],
+ ** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
+ ** but are associated with the library instead of the header file.  ^(Cautious
+ ** programmers might include assert() statements in their application to
+ ** verify that values returned by these interfaces match the macros in
+ ** the header, and thus insure that the application is
+ ** compiled with matching library and header files.
  **
- ** INVARIANTS:
+ ** <blockquote><pre>
- **
+ ** assert( sqlite3_libversion_number()==SQLITE_VERSION_NUMBER );
- ** {F10011} The SQLITE_VERSION #define in the sqlite3.h header file
+ ** assert( strcmp(sqlite3_sourceid(),SQLITE_SOURCE_ID)==0 );
- **          evaluates to a string literal that is the SQLite version
+ ** assert( strcmp(sqlite3_libversion(),SQLITE_VERSION)==0 );
- **          with which the header file is associated.
+ ** </pre></blockquote>)^
  **
- ** {F10014} The SQLITE_VERSION_NUMBER #define resolves to an integer
+ ** ^The sqlite3_version[] string constant contains the text of [SQLITE_VERSION]
- **          with the value  (X*1000000 + Y*1000 + Z) where X, Y, and
+ ** macro.  ^The sqlite3_libversion() function returns a pointer to the
- **          Z are the major version, minor version, and release number.
+ ** to the sqlite3_version[] string constant.  The sqlite3_libversion()
- */
+ ** function is provided for use in DLLs since DLL users usually do not have
- #define SQLITE_VERSION         "3.5.7"
+ ** direct access to string constants within the DLL.  ^The
- #define SQLITE_VERSION_NUMBER  3005007
+ ** sqlite3_libversion_number() function returns an integer equal to
+ ** [SQLITE_VERSION_NUMBER].  ^The sqlite3_sourceid() function returns
+ ** a pointer to a string constant whose value is the same as the
+ ** [SQLITE_SOURCE_ID] C preprocessor macro.
+ **
+ ** See also: [sqlite_version()] and [sqlite_source_id()].
+ */
+ SQLITE_API SQLITE_EXTERN const char sqlite3_version[];
+ SQLITE_API const char *sqlite3_libversion(void);
+ SQLITE_API const char *sqlite3_sourceid(void);
+ SQLITE_API int sqlite3_libversion_number(void);
+ /*
+ ** CAPI3REF: Run-Time Library Compilation Options Diagnostics
+ **
+ ** ^The sqlite3_compileoption_used() function returns 0 or 1
+ ** indicating whether the specified option was defined at
+ ** compile time.  ^The SQLITE_ prefix may be omitted from the
+ ** option name passed to sqlite3_compileoption_used().
+ **
+ ** ^The sqlite3_compileoption_get() function allows iterating
+ ** over the list of options that were defined at compile time by
+ ** returning the N-th compile time option string.  ^If N is out of range,
+ ** sqlite3_compileoption_get() returns a NULL pointer.  ^The SQLITE_
+ ** prefix is omitted from any strings returned by
+ ** sqlite3_compileoption_get().
+ **
+ ** ^Support for the diagnostic functions sqlite3_compileoption_used()
+ ** and sqlite3_compileoption_get() may be omitted by specifying the
+ ** [SQLITE_OMIT_COMPILEOPTION_DIAGS] option at compile time.
+ **
+ ** See also: SQL functions [sqlite_compileoption_used()] and
+ ** [sqlite_compileoption_get()] and the [compile_options pragma].
+ */
+ #ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
+ SQLITE_API int sqlite3_compileoption_used(const char *zOptName);
+ SQLITE_API const char *sqlite3_compileoption_get(int N);
+ #endif
  /*
- ** CAPI3REF: Run-Time Library Version Numbers {F10020}
+ ** CAPI3REF: Test To See If The Library Is Threadsafe
- ** KEYWORDS: sqlite3_version
- **
- ** These features provide the same information as the [SQLITE_VERSION]
- ** and [SQLITE_VERSION_NUMBER] #defines in the header, but are associated
- ** with the library instead of the header file.  Cautious programmers might
- ** include a check in their application to verify that
- ** sqlite3_libversion_number() always returns the value
- ** [SQLITE_VERSION_NUMBER].
- **
- ** The sqlite3_libversion() function returns the same information as is
- ** in the sqlite3_version[] string constant.  The function is provided
- ** for use in DLLs since DLL users usually do not have direct access to string
- ** constants within the DLL.
- **
- ** INVARIANTS:
- **
- ** {F10021} The [sqlite3_libversion_number()] interface returns an integer
- **          equal to [SQLITE_VERSION_NUMBER].
  **
- ** {F10022} The [sqlite3_version] string constant contains the text of the
+ ** ^The sqlite3_threadsafe() function returns zero if and only if
- **          [SQLITE_VERSION] string.
+ ** SQLite was compiled with mutexing code omitted due to the
- **
+ ** [SQLITE_THREADSAFE] compile-time option being set to 0.
- ** {F10023} The [sqlite3_libversion()] function returns
- **          a pointer to the [sqlite3_version] string constant.
- */
- SQLITE_EXTERN const char sqlite3_version[];
- const char *sqlite3_libversion(void);
- int sqlite3_libversion_number(void);
- /*
- ** CAPI3REF: Test To See If The Library Is Threadsafe {F10100}
  **
  ** SQLite can be compiled with or without mutexes.  When
- ** the SQLITE_THREADSAFE C preprocessor macro is true, mutexes
+ ** the [SQLITE_THREADSAFE] C preprocessor macro is 1 or 2, mutexes
- ** are enabled and SQLite is threadsafe.  When that macro is false,
+ ** are enabled and SQLite is threadsafe.  When the
+ ** [SQLITE_THREADSAFE] macro is 0,
  ** the mutexes are omitted.  Without the mutexes, it is not safe
- ** to use SQLite from more than one thread.
+ ** to use SQLite concurrently from more than one thread.
  **
- ** There is a measurable performance penalty for enabling mutexes.
+ ** Enabling mutexes incurs a measurable performance penalty.
  ** So if speed is of utmost importance, it makes sense to disable
  ** the mutexes.  But for maximum safety, mutexes should be enabled.
- ** The default behavior is for mutexes to be enabled.
+ ** ^The default behavior is for mutexes to be enabled.
  **
- ** This interface can be used by a program to make sure that the
+ ** This interface can be used by an application to make sure that the
  ** version of SQLite that it is linking against was compiled with
- ** the desired setting of the SQLITE_THREADSAFE macro.
+ ** the desired setting of the [SQLITE_THREADSAFE] macro.
  **
- ** INVARIANTS:
+ ** This interface only reports on the compile-time mutex setting
+ ** of the [SQLITE_THREADSAFE] flag.  If SQLite is compiled with
+ ** SQLITE_THREADSAFE=1 or =2 then mutexes are enabled by default but
+ ** can be fully or partially disabled using a call to [sqlite3_config()]
+ ** with the verbs [SQLITE_CONFIG_SINGLETHREAD], [SQLITE_CONFIG_MULTITHREAD],
+ ** or [SQLITE_CONFIG_MUTEX].  ^(The return value of the
+ ** sqlite3_threadsafe() function shows only the compile-time setting of
+ ** thread safety, not any run-time changes to that setting made by
+ ** sqlite3_config(). In other words, the return value from sqlite3_threadsafe()
+ ** is unchanged by calls to sqlite3_config().)^
  **
- ** {F10101} The [sqlite3_threadsafe()] function returns nonzero if
+ ** See the [threading mode] documentation for additional information.
- **          SQLite was compiled with its mutexes enabled or zero
- **          if SQLite was compiled with mutexes disabled.
  */
- int sqlite3_threadsafe(void);
+ SQLITE_API int sqlite3_threadsafe(void);
  /*
- ** CAPI3REF: Database Connection Handle {F12000}
+ ** CAPI3REF: Database Connection Handle
- ** KEYWORDS: {database connection}
+ ** KEYWORDS: {database connection} {database connections}
  **
- ** Each open SQLite database is represented by pointer to an instance of the
+ ** Each open SQLite database is represented by a pointer to an instance of
- ** opaque structure named "sqlite3".  It is useful to think of an sqlite3
+ ** the opaque structure named "sqlite3".  It is useful to think of an sqlite3
  ** pointer as an object.  The [sqlite3_open()], [sqlite3_open16()], and
- ** [sqlite3_open_v2()] interfaces are its constructors
+ ** [sqlite3_open_v2()] interfaces are its constructors, and [sqlite3_close()]
- ** and [sqlite3_close()] is its destructor.  There are many other interfaces
+ ** and [sqlite3_close_v2()] are its destructors.  There are many other
- ** (such as [sqlite3_prepare_v2()], [sqlite3_create_function()], and
+ ** interfaces (such as
- ** [sqlite3_busy_timeout()] to name but three) that are methods on this
+ ** [sqlite3_prepare_v2()], [sqlite3_create_function()], and
- ** object.
+ ** [sqlite3_busy_timeout()] to name but three) that are methods on an
+ ** sqlite3 object.
  */
  typedef struct sqlite3 sqlite3;
  /*
- ** CAPI3REF: 64-Bit Integer Types {F10200}
+ ** CAPI3REF: 64-Bit Integer Types
  ** KEYWORDS: sqlite_int64 sqlite_uint64
  **
  ** Because there is no cross-platform way to specify 64-bit integer types
  ** SQLite includes typedefs for 64-bit signed and unsigned integers.
  **
- ** The sqlite3_int64 and sqlite3_uint64 are the preferred type
+ ** The sqlite3_int64 and sqlite3_uint64 are the preferred type definitions.
- ** definitions.  The sqlite_int64 and sqlite_uint64 types are
+ ** The sqlite_int64 and sqlite_uint64 types are supported for backwards
- ** supported for backwards compatibility only.
+ ** compatibility only.
  **
- ** INVARIANTS:
+ ** ^The sqlite3_int64 and sqlite_int64 types can store integer values
- **
+ ** between -9223372036854775808 and +9223372036854775807 inclusive.  ^The
- ** {F10201} The [sqlite_int64] and [sqlite3_int64] types specify a
+ ** sqlite3_uint64 and sqlite_uint64 types can store integer values
- **          64-bit signed integer.
+ ** between 0 and +18446744073709551615 inclusive.
- **
- ** {F10202} The [sqlite_uint64] and [sqlite3_uint64] types specify
- **          a 64-bit unsigned integer.
  */
  #ifdef SQLITE_INT64_TYPE
    typedef SQLITE_INT64_TYPE sqlite_int64;
- Line 203  typedef sqlite_uint64 sqlite3_uint64;
+ Line 258  typedef sqlite_uint64 sqlite3_uint64;
  /*
  ** If compiling for a processor that lacks floating point support,
- ** substitute integer for floating-point
+ ** substitute integer for floating-point.
  */
  #ifdef SQLITE_OMIT_FLOATING_POINT
  # define double sqlite3_int64
  #endif
  /*
- ** CAPI3REF: Closing A Database Connection {F12010}
+ ** CAPI3REF: Closing A Database Connection
- **
- ** This routine is the destructor for the [sqlite3] object.
- **
- ** Applications should [sqlite3_finalize | finalize] all
- ** [prepared statements] and
- ** [sqlite3_blob_close | close] all [sqlite3_blob | BLOBs]
- ** associated with the [sqlite3] object prior
- ** to attempting to close the [sqlite3] object.
- **
- ** <todo>What happens to pending transactions?  Are they
- ** rolled back, or abandoned?</todo>
- **
- ** INVARIANTS:
- **
- ** {F12011} The [sqlite3_close()] interface destroys an [sqlite3] object
- **          allocated by a prior call to [sqlite3_open()],
- **          [sqlite3_open16()], or [sqlite3_open_v2()].
- **
- ** {F12012} The [sqlite3_close()] function releases all memory used by the
- **          connection and closes all open files.
- **
- ** {F12013} If the database connection contains
- **          [prepared statements] that have not been
- **          finalized by [sqlite3_finalize()], then [sqlite3_close()]
- **          returns [SQLITE_BUSY] and leaves the connection open.
- **
- ** {F12014} Giving sqlite3_close() a NULL pointer is a harmless no-op.
- **
- ** LIMITATIONS:
  **
- ** {U12015} The parameter to [sqlite3_close()] must be an [sqlite3] object
+ ** ^The sqlite3_close() and sqlite3_close_v2() routines are destructors
- **          pointer previously obtained from [sqlite3_open()] or the
+ ** for the [sqlite3] object.
- **          equivalent, or NULL.
+ ** ^Calls to sqlite3_close() and sqlite3_close_v2() return SQLITE_OK if
- **
+ ** the [sqlite3] object is successfully destroyed and all associated
- ** {U12016} The parameter to [sqlite3_close()] must not have been previously
+ ** resources are deallocated.
- **          closed.
+ **
+ ** ^If the database connection is associated with unfinalized prepared
+ ** statements or unfinished sqlite3_backup objects then sqlite3_close()
+ ** will leave the database connection open and return [SQLITE_BUSY].
+ ** ^If sqlite3_close_v2() is called with unfinalized prepared statements
+ ** and unfinished sqlite3_backups, then the database connection becomes
+ ** an unusable "zombie" which will automatically be deallocated when the
+ ** last prepared statement is finalized or the last sqlite3_backup is
+ ** finished.  The sqlite3_close_v2() interface is intended for use with
+ ** host languages that are garbage collected, and where the order in which
+ ** destructors are called is arbitrary.
+ **
+ ** Applications should [sqlite3_finalize | finalize] all [prepared statements],
+ ** [sqlite3_blob_close | close] all [BLOB handles], and
+ ** [sqlite3_backup_finish | finish] all [sqlite3_backup] objects associated
+ ** with the [sqlite3] object prior to attempting to close the object.  ^If
+ ** sqlite3_close_v2() is called on a [database connection] that still has
+ ** outstanding [prepared statements], [BLOB handles], and/or
+ ** [sqlite3_backup] objects then it returns SQLITE_OK but the deallocation
+ ** of resources is deferred until all [prepared statements], [BLOB handles],
+ ** and [sqlite3_backup] objects are also destroyed.
+ **
+ ** ^If an [sqlite3] object is destroyed while a transaction is open,
+ ** the transaction is automatically rolled back.
+ **
+ ** The C parameter to [sqlite3_close(C)] and [sqlite3_close_v2(C)]
+ ** must be either a NULL
+ ** pointer or an [sqlite3] object pointer obtained
+ ** from [sqlite3_open()], [sqlite3_open16()], or
+ ** [sqlite3_open_v2()], and not previously closed.
+ ** ^Calling sqlite3_close() or sqlite3_close_v2() with a NULL pointer
+ ** argument is a harmless no-op.
  */
- int sqlite3_close(sqlite3 *);
+ SQLITE_API int sqlite3_close(sqlite3*);
+ SQLITE_API int sqlite3_close_v2(sqlite3*);
  /*
  ** The type for a callback function.
- Line 258  int sqlite3_close(sqlite3 *);
+ Line 316  int sqlite3_close(sqlite3 *);
  typedef int (*sqlite3_callback)(void*,int,char**, char**);
  /*
- ** CAPI3REF: One-Step Query Execution Interface {F12100}
+ ** CAPI3REF: One-Step Query Execution Interface
- **
- ** The sqlite3_exec() interface is a convenient way of running
- ** one or more SQL statements without a lot of C code.  The
- ** SQL statements are passed in as the second parameter to
- ** sqlite3_exec().  The statements are evaluated one by one
- ** until either an error or an interrupt is encountered or
- ** until they are all done.  The 3rd parameter is an optional
- ** callback that is invoked once for each row of any query results
- ** produced by the SQL statements.  The 5th parameter tells where
- ** to write any error messages.
- **
- ** The sqlite3_exec() interface is implemented in terms of
- ** [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()].
- ** The sqlite3_exec() routine does nothing that cannot be done
- ** by [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()].
- ** The sqlite3_exec() is just a convenient wrapper.
  **
- ** INVARIANTS:
+ ** The sqlite3_exec() interface is a convenience wrapper around
- **
+ ** [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()],
- ** {F12101} The [sqlite3_exec()] interface evaluates zero or more UTF-8
+ ** that allows an application to run multiple statements of SQL
- **          encoded, semicolon-separated, SQL statements in the
+ ** without having to use a lot of C code.
- **          zero-terminated string of its 2nd parameter within the
+ **
- **          context of the [sqlite3] object given in the 1st parameter.
+ ** ^The sqlite3_exec() interface runs zero or more UTF-8 encoded,
- **
+ ** semicolon-separate SQL statements passed into its 2nd argument,
- ** {F12104} The return value of [sqlite3_exec()] is SQLITE_OK if all
+ ** in the context of the [database connection] passed in as its 1st
- **          SQL statements run successfully.
+ ** argument.  ^If the callback function of the 3rd argument to
- **
+ ** sqlite3_exec() is not NULL, then it is invoked for each result row
- ** {F12105} The return value of [sqlite3_exec()] is an appropriate
+ ** coming out of the evaluated SQL statements.  ^The 4th argument to
- **          non-zero error code if any SQL statement fails.
+ ** sqlite3_exec() is relayed through to the 1st argument of each
- **
+ ** callback invocation.  ^If the callback pointer to sqlite3_exec()
- ** {F12107} If one or more of the SQL statements handed to [sqlite3_exec()]
+ ** is NULL, then no callback is ever invoked and result rows are
- **          return results and the 3rd parameter is not NULL, then
+ ** ignored.
- **          the callback function specified by the 3rd parameter is
+ **
- **          invoked once for each row of result.
+ ** ^If an error occurs while evaluating the SQL statements passed into
- **
+ ** sqlite3_exec(), then execution of the current statement stops and
- ** {F12110} If the callback returns a non-zero value then [sqlite3_exec()]
+ ** subsequent statements are skipped.  ^If the 5th parameter to sqlite3_exec()
- **          will aborted the SQL statement it is currently evaluating,
+ ** is not NULL then any error message is written into memory obtained
- **          skip all subsequent SQL statements, and return [SQLITE_ABORT].
+ ** from [sqlite3_malloc()] and passed back through the 5th parameter.
- **          <todo>What happens to *errmsg here?  Does the result code for
+ ** To avoid memory leaks, the application should invoke [sqlite3_free()]
- **          sqlite3_errcode() get set?</todo>
+ ** on error message strings returned through the 5th parameter of
- **
+ ** of sqlite3_exec() after the error message string is no longer needed.
- ** {F12113} The [sqlite3_exec()] routine will pass its 4th parameter through
+ ** ^If the 5th parameter to sqlite3_exec() is not NULL and no errors
- **          as the 1st parameter of the callback.
+ ** occur, then sqlite3_exec() sets the pointer in its 5th parameter to
- **
+ ** NULL before returning.
- ** {F12116} The [sqlite3_exec()] routine sets the 2nd parameter of its
+ **
- **          callback to be the number of columns in the current row of
+ ** ^If an sqlite3_exec() callback returns non-zero, the sqlite3_exec()
- **          result.
+ ** routine returns SQLITE_ABORT without invoking the callback again and
- **
+ ** without running any subsequent SQL statements.
- ** {F12119} The [sqlite3_exec()] routine sets the 3rd parameter of its
+ **
- **          callback to be an array of pointers to strings holding the
+ ** ^The 2nd argument to the sqlite3_exec() callback function is the
- **          values for each column in the current result set row as
+ ** number of columns in the result.  ^The 3rd argument to the sqlite3_exec()
- **          obtained from [sqlite3_column_text()].
+ ** callback is an array of pointers to strings obtained as if from
- **
+ ** [sqlite3_column_text()], one for each column.  ^If an element of a
- ** {F12122} The [sqlite3_exec()] routine sets the 4th parameter of its
+ ** result row is NULL then the corresponding string pointer for the
- **          callback to be an array of pointers to strings holding the
+ ** sqlite3_exec() callback is a NULL pointer.  ^The 4th argument to the
- **          names of result columns as obtained from [sqlite3_column_name()].
+ ** sqlite3_exec() callback is an array of pointers to strings where each
- **
+ ** entry represents the name of corresponding result column as obtained
- ** {F12125} If the 3rd parameter to [sqlite3_exec()] is NULL then
+ ** from [sqlite3_column_name()].
- **          [sqlite3_exec()] never invokes a callback.  All query
+ **
- **          results are silently discarded.
+ ** ^If the 2nd parameter to sqlite3_exec() is a NULL pointer, a pointer
- **
+ ** to an empty string, or a pointer that contains only whitespace and/or
- ** {F12128} If an error occurs while parsing or evaluating any of the SQL
+ ** SQL comments, then no SQL statements are evaluated and the database
- **          statements handed to [sqlite3_exec()] then [sqlite3_exec()] will
+ ** is not changed.
- **          return an [error code] other than [SQLITE_OK].
- **
- ** {F12131} If an error occurs while parsing or evaluating any of the SQL
- **          handed to [sqlite3_exec()] and if the 5th parameter (errmsg)
- **          to [sqlite3_exec()] is not NULL, then an error message is
- **          allocated using the equivalent of [sqlite3_mprintf()] and
- **          *errmsg is made to point to that message.
- **
- ** {F12134} The [sqlite3_exec()] routine does not change the value of
- **          *errmsg if errmsg is NULL or if there are no errors.
- **
- ** {F12137} The [sqlite3_exec()] function sets the error code and message
- **          accessible via [sqlite3_errcode()], [sqlite3_errmsg()], and
- **          [sqlite3_errmsg16()].
  **
- ** LIMITATIONS:
+ ** Restrictions:
  **
- ** {U12141} The first parameter to [sqlite3_exec()] must be an valid and open
+ ** <ul>
- **          [database connection].
+ ** <li> The application must insure that the 1st parameter to sqlite3_exec()
- **
+ **      is a valid and open [database connection].
- ** {U12142} The database connection must not be closed while
+ ** <li> The application must not close [database connection] specified by
- **          [sqlite3_exec()] is running.
+ **      the 1st parameter to sqlite3_exec() while sqlite3_exec() is running.
- **
+ ** <li> The application must not modify the SQL statement text passed into
- ** {U12143} The calling function is should use [sqlite3_free()] to free
+ **      the 2nd parameter of sqlite3_exec() while sqlite3_exec() is running.
- **          the memory that *errmsg is left pointing at once the error
+ ** </ul>
- **          message is no longer needed.
- **
- ** {U12145} The SQL statement text in the 2nd parameter to [sqlite3_exec()]
- **          must remain unchanged while [sqlite3_exec()] is running.
  */
- int sqlite3_exec(
+ SQLITE_API int sqlite3_exec(
    sqlite3*,                                  /* An open database */
-   const char *sql,                           /* SQL to be evaluted */
+   const char *sql,                           /* SQL to be evaluated */
    int (*callback)(void*,int,char**,char**),  /* Callback function */
    void *,                                    /* 1st argument to callback */
    char **errmsg                              /* Error msg written here */
  );
  /*
- ** CAPI3REF: Result Codes {F10210}
+ ** CAPI3REF: Result Codes
  ** KEYWORDS: SQLITE_OK {error code} {error codes}
+ ** KEYWORDS: {result code} {result codes}
  **
  ** Many SQLite functions return an integer result code from the set shown
- ** here in order to indicates success or failure.
+ ** here in order to indicate success or failure.
+ **
+ ** New error codes may be added in future versions of SQLite.
  **
- ** See also: [SQLITE_IOERR_READ | extended result codes]
+ ** See also: [SQLITE_IOERR_READ | extended result codes],
+ ** [sqlite3_vtab_on_conflict()] [SQLITE_ROLLBACK | result codes].
  */
  #define SQLITE_OK           0   /* Successful result */
  /* beginning-of-error-codes */
- Line 382  int sqlite3_exec(
+ Line 410  int sqlite3_exec(
  #define SQLITE_INTERRUPT    9   /* Operation terminated by sqlite3_interrupt()*/
  #define SQLITE_IOERR       10   /* Some kind of disk I/O error occurred */
  #define SQLITE_CORRUPT     11   /* The database disk image is malformed */
- #define SQLITE_NOTFOUND    12   /* NOT USED. Table or record not found */
+ #define SQLITE_NOTFOUND    12   /* Unknown opcode in sqlite3_file_control() */
  #define SQLITE_FULL        13   /* Insertion failed because database is full */
  #define SQLITE_CANTOPEN    14   /* Unable to open the database file */
- #define SQLITE_PROTOCOL    15   /* NOT USED. Database lock protocol error */
+ #define SQLITE_PROTOCOL    15   /* Database lock protocol error */
  #define SQLITE_EMPTY       16   /* Database is empty */
  #define SQLITE_SCHEMA      17   /* The database schema changed */
  #define SQLITE_TOOBIG      18   /* String or BLOB exceeds size limit */
- Line 397  int sqlite3_exec(
+ Line 425  int sqlite3_exec(
  #define SQLITE_FORMAT      24   /* Auxiliary database format error */
  #define SQLITE_RANGE       25   /* 2nd parameter to sqlite3_bind out of range */
  #define SQLITE_NOTADB      26   /* File opened that is not a database file */
+ #define SQLITE_NOTICE      27   /* Notifications from sqlite3_log() */
+ #define SQLITE_WARNING     28   /* Warnings from sqlite3_log() */
  #define SQLITE_ROW         100  /* sqlite3_step() has another row ready */
  #define SQLITE_DONE        101  /* sqlite3_step() has finished executing */
  /* end-of-error-codes */
  /*
- ** CAPI3REF: Extended Result Codes {F10220}
+ ** CAPI3REF: Extended Result Codes
  ** KEYWORDS: {extended error code} {extended error codes}
- ** KEYWORDS: {extended result codes}
+ ** KEYWORDS: {extended result code} {extended result codes}
  **
  ** In its default configuration, SQLite API routines return one of 26 integer
- ** [SQLITE_OK | result codes].  However, experience has shown that
+ ** [SQLITE_OK | result codes].  However, experience has shown that many of
- ** many of these result codes are too course-grained.  They do not provide as
+ ** these result codes are too coarse-grained.  They do not provide as
  ** much information about problems as programmers might like.  In an effort to
  ** address this, newer versions of SQLite (version 3.3.8 and later) include
  ** support for additional result codes that provide more detailed information
  ** about errors. The extended result codes are enabled or disabled
- ** for each database connection using the [sqlite3_extended_result_codes()]
+ ** on a per database connection basis using the
- ** API.
+ ** [sqlite3_extended_result_codes()] API.
  **
  ** Some of the available extended result codes are listed here.
  ** One may expect the number of extended result codes will be expand
  ** over time.  Software that uses extended result codes should expect
- Line 423  int sqlite3_exec(
+ Line 453  int sqlite3_exec(
  **
  ** The SQLITE_OK result code will never be extended.  It will always
  ** be exactly zero.
- **
+ */
- ** INVARIANTS:
+ #define SQLITE_IOERR_READ              (SQLITE_IOERR | (1<<8))
- **
+ #define SQLITE_IOERR_SHORT_READ        (SQLITE_IOERR | (2<<8))
- ** {F10223} The symbolic name for an extended result code always contains
+ #define SQLITE_IOERR_WRITE             (SQLITE_IOERR | (3<<8))
- **          a related primary result code as a prefix.
+ #define SQLITE_IOERR_FSYNC             (SQLITE_IOERR | (4<<8))
- **
+ #define SQLITE_IOERR_DIR_FSYNC         (SQLITE_IOERR | (5<<8))
- ** {F10224} Primary result code names contain a single "_" character.
+ #define SQLITE_IOERR_TRUNCATE          (SQLITE_IOERR | (6<<8))
- **
+ #define SQLITE_IOERR_FSTAT             (SQLITE_IOERR | (7<<8))
- ** {F10225} Extended result code names contain two or more "_" characters.
+ #define SQLITE_IOERR_UNLOCK            (SQLITE_IOERR | (8<<8))
- **
+ #define SQLITE_IOERR_RDLOCK            (SQLITE_IOERR | (9<<8))
- ** {F10226} The numeric value of an extended result code contains the
+ #define SQLITE_IOERR_DELETE            (SQLITE_IOERR | (10<<8))
- **          numeric value of its corresponding primary result code in
+ #define SQLITE_IOERR_BLOCKED           (SQLITE_IOERR | (11<<8))
- **          its least significant 8 bits.
+ #define SQLITE_IOERR_NOMEM             (SQLITE_IOERR | (12<<8))
- */
+ #define SQLITE_IOERR_ACCESS            (SQLITE_IOERR | (13<<8))
- #define SQLITE_IOERR_READ          (SQLITE_IOERR | (1<<8))
+ #define SQLITE_IOERR_CHECKRESERVEDLOCK (SQLITE_IOERR | (14<<8))
- #define SQLITE_IOERR_SHORT_READ    (SQLITE_IOERR | (2<<8))
+ #define SQLITE_IOERR_LOCK              (SQLITE_IOERR | (15<<8))
- #define SQLITE_IOERR_WRITE         (SQLITE_IOERR | (3<<8))
+ #define SQLITE_IOERR_CLOSE             (SQLITE_IOERR | (16<<8))
- #define SQLITE_IOERR_FSYNC         (SQLITE_IOERR | (4<<8))
+ #define SQLITE_IOERR_DIR_CLOSE         (SQLITE_IOERR | (17<<8))
- #define SQLITE_IOERR_DIR_FSYNC     (SQLITE_IOERR | (5<<8))
+ #define SQLITE_IOERR_SHMOPEN           (SQLITE_IOERR | (18<<8))
- #define SQLITE_IOERR_TRUNCATE      (SQLITE_IOERR | (6<<8))
+ #define SQLITE_IOERR_SHMSIZE           (SQLITE_IOERR | (19<<8))
- #define SQLITE_IOERR_FSTAT         (SQLITE_IOERR | (7<<8))
+ #define SQLITE_IOERR_SHMLOCK           (SQLITE_IOERR | (20<<8))
- #define SQLITE_IOERR_UNLOCK        (SQLITE_IOERR | (8<<8))
+ #define SQLITE_IOERR_SHMMAP            (SQLITE_IOERR | (21<<8))
- #define SQLITE_IOERR_RDLOCK        (SQLITE_IOERR | (9<<8))
+ #define SQLITE_IOERR_SEEK              (SQLITE_IOERR | (22<<8))
- #define SQLITE_IOERR_DELETE        (SQLITE_IOERR | (10<<8))
+ #define SQLITE_IOERR_DELETE_NOENT      (SQLITE_IOERR | (23<<8))
- #define SQLITE_IOERR_BLOCKED       (SQLITE_IOERR | (11<<8))
+ #define SQLITE_IOERR_MMAP              (SQLITE_IOERR | (24<<8))
- #define SQLITE_IOERR_NOMEM         (SQLITE_IOERR | (12<<8))
+ #define SQLITE_IOERR_GETTEMPPATH       (SQLITE_IOERR | (25<<8))
+ #define SQLITE_IOERR_CONVPATH          (SQLITE_IOERR | (26<<8))
+ #define SQLITE_LOCKED_SHAREDCACHE      (SQLITE_LOCKED |  (1<<8))
+ #define SQLITE_BUSY_RECOVERY           (SQLITE_BUSY   |  (1<<8))
+ #define SQLITE_BUSY_SNAPSHOT           (SQLITE_BUSY   |  (2<<8))
+ #define SQLITE_CANTOPEN_NOTEMPDIR      (SQLITE_CANTOPEN | (1<<8))
+ #define SQLITE_CANTOPEN_ISDIR          (SQLITE_CANTOPEN | (2<<8))
+ #define SQLITE_CANTOPEN_FULLPATH       (SQLITE_CANTOPEN | (3<<8))
+ #define SQLITE_CANTOPEN_CONVPATH       (SQLITE_CANTOPEN | (4<<8))
+ #define SQLITE_CORRUPT_VTAB            (SQLITE_CORRUPT | (1<<8))
+ #define SQLITE_READONLY_RECOVERY       (SQLITE_READONLY | (1<<8))
+ #define SQLITE_READONLY_CANTLOCK       (SQLITE_READONLY | (2<<8))
+ #define SQLITE_READONLY_ROLLBACK       (SQLITE_READONLY | (3<<8))
+ #define SQLITE_ABORT_ROLLBACK          (SQLITE_ABORT | (2<<8))
+ #define SQLITE_CONSTRAINT_CHECK        (SQLITE_CONSTRAINT | (1<<8))
+ #define SQLITE_CONSTRAINT_COMMITHOOK   (SQLITE_CONSTRAINT | (2<<8))
+ #define SQLITE_CONSTRAINT_FOREIGNKEY   (SQLITE_CONSTRAINT | (3<<8))
+ #define SQLITE_CONSTRAINT_FUNCTION     (SQLITE_CONSTRAINT | (4<<8))
+ #define SQLITE_CONSTRAINT_NOTNULL      (SQLITE_CONSTRAINT | (5<<8))
+ #define SQLITE_CONSTRAINT_PRIMARYKEY   (SQLITE_CONSTRAINT | (6<<8))
+ #define SQLITE_CONSTRAINT_TRIGGER      (SQLITE_CONSTRAINT | (7<<8))
+ #define SQLITE_CONSTRAINT_UNIQUE       (SQLITE_CONSTRAINT | (8<<8))
+ #define SQLITE_CONSTRAINT_VTAB         (SQLITE_CONSTRAINT | (9<<8))
+ #define SQLITE_NOTICE_RECOVER_WAL      (SQLITE_NOTICE | (1<<8))
+ #define SQLITE_NOTICE_RECOVER_ROLLBACK (SQLITE_NOTICE | (2<<8))
+ #define SQLITE_WARNING_AUTOINDEX       (SQLITE_WARNING | (1<<8))
  /*
- ** CAPI3REF: Flags For File Open Operations {F10230}
+ ** CAPI3REF: Flags For File Open Operations
  **
  ** These bit values are intended for use in the
  ** 3rd parameter to the [sqlite3_open_v2()] interface and
- ** in the 4th parameter to the xOpen method of the
+ ** in the 4th parameter to the [sqlite3_vfs.xOpen] method.
- ** [sqlite3_vfs] object.
  */
- #define SQLITE_OPEN_READONLY         0x00000001
+ #define SQLITE_OPEN_READONLY         0x00000001  /* Ok for sqlite3_open_v2() */
- #define SQLITE_OPEN_READWRITE        0x00000002
+ #define SQLITE_OPEN_READWRITE        0x00000002  /* Ok for sqlite3_open_v2() */
- #define SQLITE_OPEN_CREATE           0x00000004
+ #define SQLITE_OPEN_CREATE           0x00000004  /* Ok for sqlite3_open_v2() */
- #define SQLITE_OPEN_DELETEONCLOSE    0x00000008
+ #define SQLITE_OPEN_DELETEONCLOSE    0x00000008  /* VFS only */
- #define SQLITE_OPEN_EXCLUSIVE        0x00000010
+ #define SQLITE_OPEN_EXCLUSIVE        0x00000010  /* VFS only */
- #define SQLITE_OPEN_MAIN_DB          0x00000100
+ #define SQLITE_OPEN_AUTOPROXY        0x00000020  /* VFS only */
- #define SQLITE_OPEN_TEMP_DB          0x00000200
+ #define SQLITE_OPEN_URI              0x00000040  /* Ok for sqlite3_open_v2() */
- #define SQLITE_OPEN_TRANSIENT_DB     0x00000400
+ #define SQLITE_OPEN_MEMORY           0x00000080  /* Ok for sqlite3_open_v2() */
- #define SQLITE_OPEN_MAIN_JOURNAL     0x00000800
+ #define SQLITE_OPEN_MAIN_DB          0x00000100  /* VFS only */
- #define SQLITE_OPEN_TEMP_JOURNAL     0x00001000
+ #define SQLITE_OPEN_TEMP_DB          0x00000200  /* VFS only */
- #define SQLITE_OPEN_SUBJOURNAL       0x00002000
+ #define SQLITE_OPEN_TRANSIENT_DB     0x00000400  /* VFS only */
- #define SQLITE_OPEN_MASTER_JOURNAL   0x00004000
+ #define SQLITE_OPEN_MAIN_JOURNAL     0x00000800  /* VFS only */
+ #define SQLITE_OPEN_TEMP_JOURNAL     0x00001000  /* VFS only */
+ #define SQLITE_OPEN_SUBJOURNAL       0x00002000  /* VFS only */
+ #define SQLITE_OPEN_MASTER_JOURNAL   0x00004000  /* VFS only */
+ #define SQLITE_OPEN_NOMUTEX          0x00008000  /* Ok for sqlite3_open_v2() */
+ #define SQLITE_OPEN_FULLMUTEX        0x00010000  /* Ok for sqlite3_open_v2() */
+ #define SQLITE_OPEN_SHAREDCACHE      0x00020000  /* Ok for sqlite3_open_v2() */
+ #define SQLITE_OPEN_PRIVATECACHE     0x00040000  /* Ok for sqlite3_open_v2() */
+ #define SQLITE_OPEN_WAL              0x00080000  /* VFS only */
+ /* Reserved:                         0x00F00000 */
  /*
- ** CAPI3REF: Device Characteristics {F10240}
+ ** CAPI3REF: Device Characteristics
  **
- ** The xDeviceCapabilities method of the [sqlite3_io_methods]
+ ** The xDeviceCharacteristics method of the [sqlite3_io_methods]
- ** object returns an integer which is a vector of the these
+ ** object returns an integer which is a vector of these
  ** bit values expressing I/O characteristics of the mass storage
  ** device that holds the file that the [sqlite3_io_methods]
  ** refers to.
- Line 489  int sqlite3_exec(
+ Line 553  int sqlite3_exec(
  ** first then the size of the file is extended, never the other
  ** way around.  The SQLITE_IOCAP_SEQUENTIAL property means that
  ** information is written to disk in the same order as calls
- ** to xWrite().
+ ** to xWrite().  The SQLITE_IOCAP_POWERSAFE_OVERWRITE property means that
- */
+ ** after reboot following a crash or power loss, the only bytes in a
- #define SQLITE_IOCAP_ATOMIC          0x00000001
+ ** file that were written at the application level might have changed
- #define SQLITE_IOCAP_ATOMIC512       0x00000002
+ ** and that adjacent bytes, even bytes within the same sector are
- #define SQLITE_IOCAP_ATOMIC1K        0x00000004
+ ** guaranteed to be unchanged.
- #define SQLITE_IOCAP_ATOMIC2K        0x00000008
+ */
- #define SQLITE_IOCAP_ATOMIC4K        0x00000010
+ #define SQLITE_IOCAP_ATOMIC                 0x00000001
- #define SQLITE_IOCAP_ATOMIC8K        0x00000020
+ #define SQLITE_IOCAP_ATOMIC512              0x00000002
- #define SQLITE_IOCAP_ATOMIC16K       0x00000040
+ #define SQLITE_IOCAP_ATOMIC1K               0x00000004
- #define SQLITE_IOCAP_ATOMIC32K       0x00000080
+ #define SQLITE_IOCAP_ATOMIC2K               0x00000008
- #define SQLITE_IOCAP_ATOMIC64K       0x00000100
+ #define SQLITE_IOCAP_ATOMIC4K               0x00000010
- #define SQLITE_IOCAP_SAFE_APPEND     0x00000200
+ #define SQLITE_IOCAP_ATOMIC8K               0x00000020
- #define SQLITE_IOCAP_SEQUENTIAL      0x00000400
+ #define SQLITE_IOCAP_ATOMIC16K              0x00000040
+ #define SQLITE_IOCAP_ATOMIC32K              0x00000080
+ #define SQLITE_IOCAP_ATOMIC64K              0x00000100
+ #define SQLITE_IOCAP_SAFE_APPEND            0x00000200
+ #define SQLITE_IOCAP_SEQUENTIAL             0x00000400
+ #define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN  0x00000800
+ #define SQLITE_IOCAP_POWERSAFE_OVERWRITE    0x00001000
  /*
- ** CAPI3REF: File Locking Levels {F10250}
+ ** CAPI3REF: File Locking Levels
  **
  ** SQLite uses one of these integer values as the second
  ** argument to calls it makes to the xLock() and xUnlock() methods
- Line 517  int sqlite3_exec(
+ Line 587  int sqlite3_exec(
  #define SQLITE_LOCK_EXCLUSIVE     4
  /*
- ** CAPI3REF: Synchronization Type Flags {F10260}
+ ** CAPI3REF: Synchronization Type Flags
  **
  ** When SQLite invokes the xSync() method of an
  ** [sqlite3_io_methods] object it uses a combination of
- Line 525  int sqlite3_exec(
+ Line 595  int sqlite3_exec(
  **
  ** When the SQLITE_SYNC_DATAONLY flag is used, it means that the
  ** sync operation only needs to flush data to mass storage.  Inode
- ** information need not be flushed. The SQLITE_SYNC_NORMAL flag means
+ ** information need not be flushed. If the lower four bits of the flag
- ** to use normal fsync() semantics. The SQLITE_SYNC_FULL flag means
+ ** equal SQLITE_SYNC_NORMAL, that means to use normal fsync() semantics.
- ** to use Mac OS-X style fullsync instead of fsync().
+ ** If the lower four bits equal SQLITE_SYNC_FULL, that means
+ ** to use Mac OS X style fullsync instead of fsync().
+ **
+ ** Do not confuse the SQLITE_SYNC_NORMAL and SQLITE_SYNC_FULL flags
+ ** with the [PRAGMA synchronous]=NORMAL and [PRAGMA synchronous]=FULL
+ ** settings.  The [synchronous pragma] determines when calls to the
+ ** xSync VFS method occur and applies uniformly across all platforms.
+ ** The SQLITE_SYNC_NORMAL and SQLITE_SYNC_FULL flags determine how
+ ** energetic or rigorous or forceful the sync operations are and
+ ** only make a difference on Mac OSX for the default SQLite code.
+ ** (Third-party VFS implementations might also make the distinction
+ ** between SQLITE_SYNC_NORMAL and SQLITE_SYNC_FULL, but among the
+ ** operating systems natively supported by SQLite, only Mac OSX
+ ** cares about the difference.)
  */
  #define SQLITE_SYNC_NORMAL        0x00002
  #define SQLITE_SYNC_FULL          0x00003
  #define SQLITE_SYNC_DATAONLY      0x00010
  /*
- ** CAPI3REF: OS Interface Open File Handle {F11110}
+ ** CAPI3REF: OS Interface Open File Handle
  **
- ** An [sqlite3_file] object represents an open file in the OS
+ ** An [sqlite3_file] object represents an open file in the
- ** interface layer.  Individual OS interface implementations will
+ ** [sqlite3_vfs | OS interface layer].  Individual OS interface
+ ** implementations will
  ** want to subclass this object by appending additional fields
  ** for their own use.  The pMethods entry is a pointer to an
  ** [sqlite3_io_methods] object that defines methods for performing
- Line 550  struct sqlite3_file {
+ Line 633  struct sqlite3_file {
  };
  /*
- ** CAPI3REF: OS Interface File Virtual Methods Object {F11120}
+ ** CAPI3REF: OS Interface File Virtual Methods Object
  **
- ** Every file opened by the [sqlite3_vfs] xOpen method contains a pointer to
+ ** Every file opened by the [sqlite3_vfs.xOpen] method populates an
- ** an instance of this object.  This object defines the
+ ** [sqlite3_file] object (or, more commonly, a subclass of the
- ** methods used to perform various operations against the open file.
+ ** [sqlite3_file] object) with a pointer to an instance of this object.
+ ** This object defines the methods used to perform various operations
+ ** against the open file represented by the [sqlite3_file] object.
+ **
+ ** If the [sqlite3_vfs.xOpen] method sets the sqlite3_file.pMethods element
+ ** to a non-NULL pointer, then the sqlite3_io_methods.xClose method
+ ** may be invoked even if the [sqlite3_vfs.xOpen] reported that it failed.  The
+ ** only way to prevent a call to xClose following a failed [sqlite3_vfs.xOpen]
+ ** is for the [sqlite3_vfs.xOpen] to set the sqlite3_file.pMethods element
+ ** to NULL.
  **
  ** The flags argument to xSync may be one of [SQLITE_SYNC_NORMAL] or
  ** [SQLITE_SYNC_FULL].  The first choice is the normal fsync().
- *  The second choice is an
+ ** The second choice is a Mac OS X style fullsync.  The [SQLITE_SYNC_DATAONLY]
- ** OS-X style fullsync.  The SQLITE_SYNC_DATA flag may be ORed in to
+ ** flag may be ORed in to indicate that only the data of the file
- ** indicate that only the data of the file and not its inode needs to be
+ ** and not its inode needs to be synced.
- ** synced.
+ **
- **
  ** The integer values to xLock() and xUnlock() are one of
  ** <ul>
  ** <li> [SQLITE_LOCK_NONE],
- Line 571  struct sqlite3_file {
+ Line 662  struct sqlite3_file {
  ** <li> [SQLITE_LOCK_PENDING], or
  ** <li> [SQLITE_LOCK_EXCLUSIVE].
  ** </ul>
  ** xLock() increases the lock. xUnlock() decreases the lock.
- ** The xCheckReservedLock() method looks
+ ** The xCheckReservedLock() method checks whether any database connection,
- ** to see if any database connection, either in this
+ ** either in this process or in some other process, is holding a RESERVED,
- ** process or in some other process, is holding an RESERVED,
  ** PENDING, or EXCLUSIVE lock on the file.  It returns true
- ** if such a lock exists and false if not.
+ ** if such a lock exists and false otherwise.
  **
  ** The xFileControl() method is a generic interface that allows custom
  ** VFS implementations to directly control an open file using the
- ** [sqlite3_file_control()] interface.  The second "op" argument
+ ** [sqlite3_file_control()] interface.  The second "op" argument is an
- ** is an integer opcode.   The third
+ ** integer opcode.  The third argument is a generic pointer intended to
- ** argument is a generic pointer which is intended to be a pointer
+ ** point to a structure that may contain arguments or space in which to
- ** to a structure that may contain arguments or space in which to
  ** write return values.  Potential uses for xFileControl() might be
  ** functions to enable blocking locks with timeouts, to change the
  ** locking strategy (for example to use dot-file locks), to inquire
  ** about the status of a lock, or to break stale locks.  The SQLite
- ** core reserves opcodes less than 100 for its own use.
+ ** core reserves all opcodes less than 100 for its own use.
  ** A [SQLITE_FCNTL_LOCKSTATE | list of opcodes] less than 100 is available.
  ** Applications that define a custom xFileControl method should use opcodes
- ** greater than 100 to avoid conflicts.
+ ** greater than 100 to avoid conflicts.  VFS implementations should
+ ** return [SQLITE_NOTFOUND] for file control opcodes that they do not
+ ** recognize.
  **
  ** The xSectorSize() method returns the sector size of the
  ** device that underlies the file.  The sector size is the
- Line 624  struct sqlite3_file {
+ Line 715  struct sqlite3_file {
  ** way around.  The SQLITE_IOCAP_SEQUENTIAL property means that
  ** information is written to disk in the same order as calls
  ** to xWrite().
+ **
+ ** If xRead() returns SQLITE_IOERR_SHORT_READ it must also fill
+ ** in the unread portions of the buffer with zeros.  A VFS that
+ ** fails to zero-fill short reads might seem to work.  However,
+ ** failure to zero-fill short reads will eventually lead to
+ ** database corruption.
  */
  typedef struct sqlite3_io_methods sqlite3_io_methods;
  struct sqlite3_io_methods {
- Line 636  struct sqlite3_io_methods {
+ Line 733  struct sqlite3_io_methods {
    int (*xFileSize)(sqlite3_file*, sqlite3_int64 *pSize);
    int (*xLock)(sqlite3_file*, int);
    int (*xUnlock)(sqlite3_file*, int);
-   int (*xCheckReservedLock)(sqlite3_file*);
+   int (*xCheckReservedLock)(sqlite3_file*, int *pResOut);
    int (*xFileControl)(sqlite3_file*, int op, void *pArg);
    int (*xSectorSize)(sqlite3_file*);
    int (*xDeviceCharacteristics)(sqlite3_file*);
+   /* Methods above are valid for version 1 */
+   int (*xShmMap)(sqlite3_file*, int iPg, int pgsz, int, void volatile**);
+   int (*xShmLock)(sqlite3_file*, int offset, int n, int flags);
+   void (*xShmBarrier)(sqlite3_file*);
+   int (*xShmUnmap)(sqlite3_file*, int deleteFlag);
+   /* Methods above are valid for version 2 */
+   int (*xFetch)(sqlite3_file*, sqlite3_int64 iOfst, int iAmt, void **pp);
+   int (*xUnfetch)(sqlite3_file*, sqlite3_int64 iOfst, void *p);
+   /* Methods above are valid for version 3 */
    /* Additional methods may be added in future releases */
  };
  /*
- ** CAPI3REF: Standard File Control Opcodes {F11310}
+ ** CAPI3REF: Standard File Control Opcodes
  **
  ** These integer constants are opcodes for the xFileControl method
- ** of the [sqlite3_io_methods] object and to the [sqlite3_file_control()]
+ ** of the [sqlite3_io_methods] object and for the [sqlite3_file_control()]
  ** interface.
  **
  ** The [SQLITE_FCNTL_LOCKSTATE] opcode is used for debugging.  This
- Line 657  struct sqlite3_io_methods {
+ Line 763  struct sqlite3_io_methods {
  ** into an integer that the pArg argument points to. This capability
  ** is used during testing and only needs to be supported when SQLITE_TEST
  ** is defined.
+ ** <ul>
+ ** <li>[[SQLITE_FCNTL_SIZE_HINT]]
+ ** The [SQLITE_FCNTL_SIZE_HINT] opcode is used by SQLite to give the VFS
+ ** layer a hint of how large the database file will grow to be during the
+ ** current transaction.  This hint is not guaranteed to be accurate but it
+ ** is often close.  The underlying VFS might choose to preallocate database
+ ** file space based on this hint in order to help writes to the database
+ ** file run faster.
+ **
+ ** <li>[[SQLITE_FCNTL_CHUNK_SIZE]]
+ ** The [SQLITE_FCNTL_CHUNK_SIZE] opcode is used to request that the VFS
+ ** extends and truncates the database file in chunks of a size specified
+ ** by the user. The fourth argument to [sqlite3_file_control()] should
+ ** point to an integer (type int) containing the new chunk-size to use
+ ** for the nominated database. Allocating database file space in large
+ ** chunks (say 1MB at a time), may reduce file-system fragmentation and
+ ** improve performance on some systems.
+ **
+ ** <li>[[SQLITE_FCNTL_FILE_POINTER]]
+ ** The [SQLITE_FCNTL_FILE_POINTER] opcode is used to obtain a pointer
+ ** to the [sqlite3_file] object associated with a particular database
+ ** connection.  See the [sqlite3_file_control()] documentation for
+ ** additional information.
+ **
+ ** <li>[[SQLITE_FCNTL_SYNC_OMITTED]]
+ ** ^(The [SQLITE_FCNTL_SYNC_OMITTED] opcode is generated internally by
+ ** SQLite and sent to all VFSes in place of a call to the xSync method
+ ** when the database connection has [PRAGMA synchronous] set to OFF.)^
+ ** Some specialized VFSes need this signal in order to operate correctly
+ ** when [PRAGMA synchronous | PRAGMA synchronous=OFF] is set, but most
+ ** VFSes do not need this signal and should silently ignore this opcode.
+ ** Applications should not call [sqlite3_file_control()] with this
+ ** opcode as doing so may disrupt the operation of the specialized VFSes
+ ** that do require it.
+ **
+ ** <li>[[SQLITE_FCNTL_WIN32_AV_RETRY]]
+ ** ^The [SQLITE_FCNTL_WIN32_AV_RETRY] opcode is used to configure automatic
+ ** retry counts and intervals for certain disk I/O operations for the
+ ** windows [VFS] in order to provide robustness in the presence of
+ ** anti-virus programs.  By default, the windows VFS will retry file read,
+ ** file write, and file delete operations up to 10 times, with a delay
+ ** of 25 milliseconds before the first retry and with the delay increasing
+ ** by an additional 25 milliseconds with each subsequent retry.  This
+ ** opcode allows these two values (10 retries and 25 milliseconds of delay)
+ ** to be adjusted.  The values are changed for all database connections
+ ** within the same process.  The argument is a pointer to an array of two
+ ** integers where the first integer i the new retry count and the second
+ ** integer is the delay.  If either integer is negative, then the setting
+ ** is not changed but instead the prior value of that setting is written
+ ** into the array entry, allowing the current retry settings to be
+ ** interrogated.  The zDbName parameter is ignored.
+ **
+ ** <li>[[SQLITE_FCNTL_PERSIST_WAL]]
+ ** ^The [SQLITE_FCNTL_PERSIST_WAL] opcode is used to set or query the
+ ** persistent [WAL | Write Ahead Log] setting.  By default, the auxiliary
+ ** write ahead log and shared memory files used for transaction control
+ ** are automatically deleted when the latest connection to the database
+ ** closes.  Setting persistent WAL mode causes those files to persist after
+ ** close.  Persisting the files is useful when other processes that do not
+ ** have write permission on the directory containing the database file want
+ ** to read the database file, as the WAL and shared memory files must exist
+ ** in order for the database to be readable.  The fourth parameter to
+ ** [sqlite3_file_control()] for this opcode should be a pointer to an integer.
+ ** That integer is 0 to disable persistent WAL mode or 1 to enable persistent
+ ** WAL mode.  If the integer is -1, then it is overwritten with the current
+ ** WAL persistence setting.
+ **
+ ** <li>[[SQLITE_FCNTL_POWERSAFE_OVERWRITE]]
+ ** ^The [SQLITE_FCNTL_POWERSAFE_OVERWRITE] opcode is used to set or query the
+ ** persistent "powersafe-overwrite" or "PSOW" setting.  The PSOW setting
+ ** determines the [SQLITE_IOCAP_POWERSAFE_OVERWRITE] bit of the
+ ** xDeviceCharacteristics methods. The fourth parameter to
+ ** [sqlite3_file_control()] for this opcode should be a pointer to an integer.
+ ** That integer is 0 to disable zero-damage mode or 1 to enable zero-damage
+ ** mode.  If the integer is -1, then it is overwritten with the current
+ ** zero-damage mode setting.
+ **
+ ** <li>[[SQLITE_FCNTL_OVERWRITE]]
+ ** ^The [SQLITE_FCNTL_OVERWRITE] opcode is invoked by SQLite after opening
+ ** a write transaction to indicate that, unless it is rolled back for some
+ ** reason, the entire database file will be overwritten by the current
+ ** transaction. This is used by VACUUM operations.
+ **
+ ** <li>[[SQLITE_FCNTL_VFSNAME]]
+ ** ^The [SQLITE_FCNTL_VFSNAME] opcode can be used to obtain the names of
+ ** all [VFSes] in the VFS stack.  The names are of all VFS shims and the
+ ** final bottom-level VFS are written into memory obtained from
+ ** [sqlite3_malloc()] and the result is stored in the char* variable
+ ** that the fourth parameter of [sqlite3_file_control()] points to.
+ ** The caller is responsible for freeing the memory when done.  As with
+ ** all file-control actions, there is no guarantee that this will actually
+ ** do anything.  Callers should initialize the char* variable to a NULL
+ ** pointer in case this file-control is not implemented.  This file-control
+ ** is intended for diagnostic use only.
+ **
+ ** <li>[[SQLITE_FCNTL_PRAGMA]]
+ ** ^Whenever a [PRAGMA] statement is parsed, an [SQLITE_FCNTL_PRAGMA]
+ ** file control is sent to the open [sqlite3_file] object corresponding
+ ** to the database file to which the pragma statement refers. ^The argument
+ ** to the [SQLITE_FCNTL_PRAGMA] file control is an array of
+ ** pointers to strings (char**) in which the second element of the array
+ ** is the name of the pragma and the third element is the argument to the
+ ** pragma or NULL if the pragma has no argument.  ^The handler for an
+ ** [SQLITE_FCNTL_PRAGMA] file control can optionally make the first element
+ ** of the char** argument point to a string obtained from [sqlite3_mprintf()]
+ ** or the equivalent and that string will become the result of the pragma or
+ ** the error message if the pragma fails. ^If the
+ ** [SQLITE_FCNTL_PRAGMA] file control returns [SQLITE_NOTFOUND], then normal
+ ** [PRAGMA] processing continues.  ^If the [SQLITE_FCNTL_PRAGMA]
+ ** file control returns [SQLITE_OK], then the parser assumes that the
+ ** VFS has handled the PRAGMA itself and the parser generates a no-op
+ ** prepared statement.  ^If the [SQLITE_FCNTL_PRAGMA] file control returns
+ ** any result code other than [SQLITE_OK] or [SQLITE_NOTFOUND], that means
+ ** that the VFS encountered an error while handling the [PRAGMA] and the
+ ** compilation of the PRAGMA fails with an error.  ^The [SQLITE_FCNTL_PRAGMA]
+ ** file control occurs at the beginning of pragma statement analysis and so
+ ** it is able to override built-in [PRAGMA] statements.
+ **
+ ** <li>[[SQLITE_FCNTL_BUSYHANDLER]]
+ ** ^The [SQLITE_FCNTL_BUSYHANDLER]
+ ** file-control may be invoked by SQLite on the database file handle
+ ** shortly after it is opened in order to provide a custom VFS with access
+ ** to the connections busy-handler callback. The argument is of type (void **)
+ ** - an array of two (void *) values. The first (void *) actually points
+ ** to a function of type (int (*)(void *)). In order to invoke the connections
+ ** busy-handler, this function should be invoked with the second (void *) in
+ ** the array as the only argument. If it returns non-zero, then the operation
+ ** should be retried. If it returns zero, the custom VFS should abandon the
+ ** current operation.
+ **
+ ** <li>[[SQLITE_FCNTL_TEMPFILENAME]]
+ ** ^Application can invoke the [SQLITE_FCNTL_TEMPFILENAME] file-control
+ ** to have SQLite generate a
+ ** temporary filename using the same algorithm that is followed to generate
+ ** temporary filenames for TEMP tables and other internal uses.  The
+ ** argument should be a char** which will be filled with the filename
+ ** written into memory obtained from [sqlite3_malloc()].  The caller should
+ ** invoke [sqlite3_free()] on the result to avoid a memory leak.
+ **
+ ** <li>[[SQLITE_FCNTL_MMAP_SIZE]]
+ ** The [SQLITE_FCNTL_MMAP_SIZE] file control is used to query or set the
+ ** maximum number of bytes that will be used for memory-mapped I/O.
+ ** The argument is a pointer to a value of type sqlite3_int64 that
+ ** is an advisory maximum number of bytes in the file to memory map.  The
+ ** pointer is overwritten with the old value.  The limit is not changed if
+ ** the value originally pointed to is negative, and so the current limit
+ ** can be queried by passing in a pointer to a negative number.  This
+ ** file-control is used internally to implement [PRAGMA mmap_size].
+ **
+ ** </ul>
  */
- #define SQLITE_FCNTL_LOCKSTATE        1
+ #define SQLITE_FCNTL_LOCKSTATE               1
+ #define SQLITE_GET_LOCKPROXYFILE             2
+ #define SQLITE_SET_LOCKPROXYFILE             3
+ #define SQLITE_LAST_ERRNO                    4
+ #define SQLITE_FCNTL_SIZE_HINT               5
+ #define SQLITE_FCNTL_CHUNK_SIZE              6
+ #define SQLITE_FCNTL_FILE_POINTER            7
+ #define SQLITE_FCNTL_SYNC_OMITTED            8
+ #define SQLITE_FCNTL_WIN32_AV_RETRY          9
+ #define SQLITE_FCNTL_PERSIST_WAL            10
+ #define SQLITE_FCNTL_OVERWRITE              11
+ #define SQLITE_FCNTL_VFSNAME                12
+ #define SQLITE_FCNTL_POWERSAFE_OVERWRITE    13
+ #define SQLITE_FCNTL_PRAGMA                 14
+ #define SQLITE_FCNTL_BUSYHANDLER            15
+ #define SQLITE_FCNTL_TEMPFILENAME           16
+ #define SQLITE_FCNTL_MMAP_SIZE              18
  /*
- ** CAPI3REF: Mutex Handle {F17110}
+ ** CAPI3REF: Mutex Handle
  **
  ** The mutex module within SQLite defines [sqlite3_mutex] to be an
  ** abstract type for a mutex object.  The SQLite core never looks
- Line 673  struct sqlite3_io_methods {
+ Line 945  struct sqlite3_io_methods {
  typedef struct sqlite3_mutex sqlite3_mutex;
  /*
- ** CAPI3REF: OS Interface Object {F11140}
+ ** CAPI3REF: OS Interface Object
  **
- ** An instance of this object defines the interface between the
+ ** An instance of the sqlite3_vfs object defines the interface between
- ** SQLite core and the underlying operating system.  The "vfs"
+ ** the SQLite core and the underlying operating system.  The "vfs"
- ** in the name of the object stands for "virtual file system".
+ ** in the name of the object stands for "virtual file system".  See
- **
+ ** the [VFS | VFS documentation] for further information.
- ** The iVersion field is initially 1 but may be larger for future
+ **
- ** versions of SQLite.  Additional fields may be appended to this
+ ** The value of the iVersion field is initially 1 but may be larger in
- ** object when the iVersion value is increased.
+ ** future versions of SQLite.  Additional fields may be appended to this
+ ** object when the iVersion value is increased.  Note that the structure
+ ** of the sqlite3_vfs object changes in the transaction between
+ ** SQLite version 3.5.9 and 3.6.0 and yet the iVersion field was not
+ ** modified.
  **
  ** The szOsFile field is the size of the subclassed [sqlite3_file]
  ** structure used by this VFS.  mxPathname is the maximum length of
- Line 691  typedef struct sqlite3_mutex sqlite3_mut
+ Line 967  typedef struct sqlite3_mutex sqlite3_mut
  ** the pNext pointer.  The [sqlite3_vfs_register()]
  ** and [sqlite3_vfs_unregister()] interfaces manage this list
  ** in a thread-safe way.  The [sqlite3_vfs_find()] interface
- ** searches the list.
+ ** searches the list.  Neither the application code nor the VFS
+ ** implementation should use the pNext pointer.
  **
  ** The pNext field is the only field in the sqlite3_vfs
  ** structure that SQLite will ever modify.  SQLite will only access
  ** or modify this field while holding a particular static mutex.
  ** The application should never modify anything within the sqlite3_vfs
- Line 702  typedef struct sqlite3_mutex sqlite3_mut
+ Line 979  typedef struct sqlite3_mutex sqlite3_mut
  ** The zName field holds the name of the VFS module.  The name must
  ** be unique across all VFS modules.
  **
- ** {F11141} SQLite will guarantee that the zFilename string passed to
+ ** [[sqlite3_vfs.xOpen]]
- ** xOpen() is a full pathname as generated by xFullPathname() and
+ ** ^SQLite guarantees that the zFilename parameter to xOpen
- ** that the string will be valid and unchanged until xClose() is
+ ** is either a NULL pointer or string obtained
- ** called.  {END} So the [sqlite3_file] can store a pointer to the
+ ** from xFullPathname() with an optional suffix added.
+ ** ^If a suffix is added to the zFilename parameter, it will
+ ** consist of a single "-" character followed by no more than
+ ** 11 alphanumeric and/or "-" characters.
+ ** ^SQLite further guarantees that
+ ** the string will be valid and unchanged until xClose() is
+ ** called. Because of the previous sentence,
+ ** the [sqlite3_file] can safely store a pointer to the
  ** filename if it needs to remember the filename for some reason.
+ ** If the zFilename parameter to xOpen is a NULL pointer then xOpen
+ ** must invent its own temporary name for the file.  ^Whenever the
+ ** xFilename parameter is NULL it will also be the case that the
+ ** flags parameter will include [SQLITE_OPEN_DELETEONCLOSE].
  **
- ** {F11142} The flags argument to xOpen() includes all bits set in
+ ** The flags argument to xOpen() includes all bits set in
  ** the flags argument to [sqlite3_open_v2()].  Or if [sqlite3_open()]
  ** or [sqlite3_open16()] is used, then flags includes at least
- ** [SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]. {END}
+ ** [SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE].
  ** If xOpen() opens a file read-only then it sets *pOutFlags to
- ** include [SQLITE_OPEN_READONLY].  Other bits in *pOutFlags may be
+ ** include [SQLITE_OPEN_READONLY].  Other bits in *pOutFlags may be set.
- ** set.
+ **
- **
+ ** ^(SQLite will also add one of the following flags to the xOpen()
- ** {F11143} SQLite will also add one of the following flags to the xOpen()
  ** call, depending on the object being opened:
  **
  ** <ul>
  ** <li>  [SQLITE_OPEN_MAIN_DB]
  ** <li>  [SQLITE_OPEN_MAIN_JOURNAL]
- Line 727  typedef struct sqlite3_mutex sqlite3_mut
+ Line 1014  typedef struct sqlite3_mutex sqlite3_mut
  ** <li>  [SQLITE_OPEN_TRANSIENT_DB]
  ** <li>  [SQLITE_OPEN_SUBJOURNAL]
  ** <li>  [SQLITE_OPEN_MASTER_JOURNAL]
- ** </ul> {END}
+ ** <li>  [SQLITE_OPEN_WAL]
+ ** </ul>)^
  **
  ** The file I/O implementation can use the object type flags to
- ** changes the way it deals with files.  For example, an application
+ ** change the way it deals with files.  For example, an application
  ** that does not care about crash recovery or rollback might make
  ** the open of a journal file a no-op.  Writes to this journal would
  ** also be no-ops, and any attempt to read the journal would return
  ** SQLITE_IOERR.  Or the implementation might recognize that a database
  ** file will be doing page-aligned sector reads and writes in a random
  ** order and set up its I/O subsystem accordingly.
  **
- ** SQLite might also add one of the following flags to the xOpen
+ ** SQLite might also add one of the following flags to the xOpen method:
- ** method:
+ **
- **
  ** <ul>
  ** <li> [SQLITE_OPEN_DELETEONCLOSE]
  ** <li> [SQLITE_OPEN_EXCLUSIVE]
  ** </ul>
  **
- ** {F11145} The [SQLITE_OPEN_DELETEONCLOSE] flag means the file should be
+ ** The [SQLITE_OPEN_DELETEONCLOSE] flag means the file should be
- ** deleted when it is closed.  {F11146} The [SQLITE_OPEN_DELETEONCLOSE]
+ ** deleted when it is closed.  ^The [SQLITE_OPEN_DELETEONCLOSE]
- ** will be set for TEMP  databases, journals and for subjournals.
+ ** will be set for TEMP databases and their journals, transient
- ** {F11147} The [SQLITE_OPEN_EXCLUSIVE] flag means the file should be opened
+ ** databases, and subjournals.
- ** for exclusive access.  This flag is set for all files except
+ **
- ** for the main database file. {END}
+ ** ^The [SQLITE_OPEN_EXCLUSIVE] flag is always used in conjunction
- **
+ ** with the [SQLITE_OPEN_CREATE] flag, which are both directly
- ** {F11148} At least szOsFile bytes of memory are allocated by SQLite
+ ** analogous to the O_EXCL and O_CREAT flags of the POSIX open()
- ** to hold the  [sqlite3_file] structure passed as the third
+ ** API.  The SQLITE_OPEN_EXCLUSIVE flag, when paired with the
- ** argument to xOpen.  {END}  The xOpen method does not have to
+ ** SQLITE_OPEN_CREATE, is used to indicate that file should always
- ** allocate the structure; it should just fill it in.
+ ** be created, and that it is an error if it already exists.
- **
+ ** It is <i>not</i> used to indicate the file should be opened
- ** {F11149} The flags argument to xAccess() may be [SQLITE_ACCESS_EXISTS]
+ ** for exclusive access.
- ** to test for the existance of a file,
+ **
- ** or [SQLITE_ACCESS_READWRITE] to test to see
+ ** ^At least szOsFile bytes of memory are allocated by SQLite
- ** if a file is readable and writable, or [SQLITE_ACCESS_READ]
+ ** to hold the  [sqlite3_file] structure passed as the third
- ** to test to see if a file is at least readable.  {END} The file can be a
+ ** argument to xOpen.  The xOpen method does not have to
+ ** allocate the structure; it should just fill it in.  Note that
+ ** the xOpen method must set the sqlite3_file.pMethods to either
+ ** a valid [sqlite3_io_methods] object or to NULL.  xOpen must do
+ ** this even if the open fails.  SQLite expects that the sqlite3_file.pMethods
+ ** element will be valid after xOpen returns regardless of the success
+ ** or failure of the xOpen call.
+ **
+ ** [[sqlite3_vfs.xAccess]]
+ ** ^The flags argument to xAccess() may be [SQLITE_ACCESS_EXISTS]
+ ** to test for the existence of a file, or [SQLITE_ACCESS_READWRITE] to
+ ** test whether a file is readable and writable, or [SQLITE_ACCESS_READ]
+ ** to test whether a file is at least readable.   The file can be a
  ** directory.
  **
- ** {F11150} SQLite will always allocate at least mxPathname+1 bytes for
+ ** ^SQLite will always allocate at least mxPathname+1 bytes for the
- ** the output buffers for xGetTempname and xFullPathname. {F11151} The exact
+ ** output buffer xFullPathname.  The exact size of the output buffer
- ** size of the output buffer is also passed as a parameter to both
+ ** is also passed as a parameter to both  methods. If the output buffer
- ** methods. {END} If the output buffer is not large enough, SQLITE_CANTOPEN
+ ** is not large enough, [SQLITE_CANTOPEN] should be returned. Since this is
- ** should be returned. As this is handled as a fatal error by SQLite,
+ ** handled as a fatal error by SQLite, vfs implementations should endeavor
- ** vfs implementations should endeavor to prevent this by setting
+ ** to prevent this by setting mxPathname to a sufficiently large value.
- ** mxPathname to a sufficiently large value.
+ **
- **
+ ** The xRandomness(), xSleep(), xCurrentTime(), and xCurrentTimeInt64()
- ** The xRandomness(), xSleep(), and xCurrentTime() interfaces
+ ** interfaces are not strictly a part of the filesystem, but they are
- ** are not strictly a part of the filesystem, but they are
  ** included in the VFS structure for completeness.
  ** The xRandomness() function attempts to return nBytes bytes
  ** of good-quality randomness into zOut.  The return value is
- ** the actual number of bytes of randomness obtained.  The
+ ** the actual number of bytes of randomness obtained.
- ** xSleep() method causes the calling thread to sleep for at
+ ** The xSleep() method causes the calling thread to sleep for at
- ** least the number of microseconds given.  The xCurrentTime()
+ ** least the number of microseconds given.  ^The xCurrentTime()
- ** method returns a Julian Day Number for the current date and
+ ** method returns a Julian Day Number for the current date and time as
- ** time.
+ ** a floating point value.
+ ** ^The xCurrentTimeInt64() method returns, as an integer, the Julian
+ ** Day Number multiplied by 86400000 (the number of milliseconds in
+ ** a 24-hour day).
+ ** ^SQLite will use the xCurrentTimeInt64() method to get the current
+ ** date and time if that method is available (if iVersion is 2 or
+ ** greater and the function pointer is not NULL) and will fall back
+ ** to xCurrentTime() if xCurrentTimeInt64() is unavailable.
+ **
+ ** ^The xSetSystemCall(), xGetSystemCall(), and xNestSystemCall() interfaces
+ ** are not used by the SQLite core.  These optional interfaces are provided
+ ** by some VFSes to facilitate testing of the VFS code. By overriding
+ ** system calls with functions under its control, a test program can
+ ** simulate faults and error conditions that would otherwise be difficult
+ ** or impossible to induce.  The set of system calls that can be overridden
+ ** varies from one VFS to another, and from one version of the same VFS to the
+ ** next.  Applications that use these interfaces must be prepared for any
+ ** or all of these interfaces to be NULL or for their behavior to change
+ ** from one release to the next.  Applications must not attempt to access
+ ** any of these methods if the iVersion of the VFS is less than 3.
  */
  typedef struct sqlite3_vfs sqlite3_vfs;
+ typedef void (*sqlite3_syscall_ptr)(void);
  struct sqlite3_vfs {
-   int iVersion;            /* Structure version number */
+   int iVersion;            /* Structure version number (currently 3) */
    int szOsFile;            /* Size of subclassed sqlite3_file */
    int mxPathname;          /* Maximum file pathname length */
    sqlite3_vfs *pNext;      /* Next registered VFS */
- Line 795  struct sqlite3_vfs {
+ Line 1113  struct sqlite3_vfs {
    int (*xOpen)(sqlite3_vfs*, const char *zName, sqlite3_file*,
                 int flags, int *pOutFlags);
    int (*xDelete)(sqlite3_vfs*, const char *zName, int syncDir);
-   int (*xAccess)(sqlite3_vfs*, const char *zName, int flags);
+   int (*xAccess)(sqlite3_vfs*, const char *zName, int flags, int *pResOut);
-   int (*xGetTempname)(sqlite3_vfs*, int nOut, char *zOut);
    int (*xFullPathname)(sqlite3_vfs*, const char *zName, int nOut, char *zOut);
    void *(*xDlOpen)(sqlite3_vfs*, const char *zFilename);
    void (*xDlError)(sqlite3_vfs*, int nByte, char *zErrMsg);
-   void *(*xDlSym)(sqlite3_vfs*,void*, const char *zSymbol);
+   void (*(*xDlSym)(sqlite3_vfs*,void*, const char *zSymbol))(void);
    void (*xDlClose)(sqlite3_vfs*, void*);
    int (*xRandomness)(sqlite3_vfs*, int nByte, char *zOut);
    int (*xSleep)(sqlite3_vfs*, int microseconds);
    int (*xCurrentTime)(sqlite3_vfs*, double*);
-   /* New fields may be appended in figure versions.  The iVersion
+   int (*xGetLastError)(sqlite3_vfs*, int, char *);
-   ** value will increment whenever this happens. */
+   /*
+   ** The methods above are in version 1 of the sqlite_vfs object
+   ** definition.  Those that follow are added in version 2 or later
+   */
+   int (*xCurrentTimeInt64)(sqlite3_vfs*, sqlite3_int64*);
+   /*
+   ** The methods above are in versions 1 and 2 of the sqlite_vfs object.
+   ** Those below are for version 3 and greater.
+   */
+   int (*xSetSystemCall)(sqlite3_vfs*, const char *zName, sqlite3_syscall_ptr);
+   sqlite3_syscall_ptr (*xGetSystemCall)(sqlite3_vfs*, const char *zName);
+   const char *(*xNextSystemCall)(sqlite3_vfs*, const char *zName);
+   /*
+   ** The methods above are in versions 1 through 3 of the sqlite_vfs object.
+   ** New fields may be appended in figure versions.  The iVersion
+   ** value will increment whenever this happens.
+   */
  };
  /*
- ** CAPI3REF: Flags for the xAccess VFS method {F11190}
+ ** CAPI3REF: Flags for the xAccess VFS method
  **
- ** {F11191} These integer constants can be used as the third parameter to
+ ** These integer constants can be used as the third parameter to
- ** the xAccess method of an [sqlite3_vfs] object. {END}  They determine
+ ** the xAccess method of an [sqlite3_vfs] object.  They determine
- ** what kind of permissions the xAccess method is
+ ** what kind of permissions the xAccess method is looking for.
- ** looking for.  {F11192} With SQLITE_ACCESS_EXISTS, the xAccess method
+ ** With SQLITE_ACCESS_EXISTS, the xAccess method
- ** simply checks to see if the file exists. {F11193} With
+ ** simply checks whether the file exists.
- ** SQLITE_ACCESS_READWRITE, the xAccess method checks to see
+ ** With SQLITE_ACCESS_READWRITE, the xAccess method
- ** if the file is both readable and writable.  {F11194} With
+ ** checks whether the named directory is both readable and writable
- ** SQLITE_ACCESS_READ the xAccess method
+ ** (in other words, if files can be added, removed, and renamed within
- ** checks to see if the file is readable.
+ ** the directory).
+ ** The SQLITE_ACCESS_READWRITE constant is currently used only by the
+ ** [temp_store_directory pragma], though this could change in a future
+ ** release of SQLite.
+ ** With SQLITE_ACCESS_READ, the xAccess method
+ ** checks whether the file is readable.  The SQLITE_ACCESS_READ constant is
+ ** currently unused, though it might be used in a future release of
+ ** SQLite.
  */
  #define SQLITE_ACCESS_EXISTS    0
- #define SQLITE_ACCESS_READWRITE 1
+ #define SQLITE_ACCESS_READWRITE 1   /* Used by PRAGMA temp_store_directory */
- #define SQLITE_ACCESS_READ      2
+ #define SQLITE_ACCESS_READ      2   /* Unused */
  /*
- ** CAPI3REF: Enable Or Disable Extended Result Codes {F12200}
+ ** CAPI3REF: Flags for the xShmLock VFS method
  **
- ** The sqlite3_extended_result_codes() routine enables or disables the
+ ** These integer constants define the various locking operations
- ** [SQLITE_IOERR_READ | extended result codes] feature of SQLite.
+ ** allowed by the xShmLock method of [sqlite3_io_methods].  The
- ** The extended result codes are disabled by default for historical
+ ** following are the only legal combinations of flags to the
- ** compatibility.
+ ** xShmLock method:
  **
- ** INVARIANTS:
+ ** <ul>
+ ** <li>  SQLITE_SHM_LOCK | SQLITE_SHM_SHARED
+ ** <li>  SQLITE_SHM_LOCK | SQLITE_SHM_EXCLUSIVE
+ ** <li>  SQLITE_SHM_UNLOCK | SQLITE_SHM_SHARED
+ ** <li>  SQLITE_SHM_UNLOCK | SQLITE_SHM_EXCLUSIVE
+ ** </ul>
  **
- ** {F12201} Each new [database connection] has the
+ ** When unlocking, the same SHARED or EXCLUSIVE flag must be supplied as
- **          [extended result codes] feature
+ ** was given no the corresponding lock.
- **          disabled by default.
  **
- ** {F12202} The [sqlite3_extended_result_codes(D,F)] interface will enable
+ ** The xShmLock method can transition between unlocked and SHARED or
- **          [extended result codes] for the
+ ** between unlocked and EXCLUSIVE.  It cannot transition between SHARED
- **          [database connection] D if the F parameter
+ ** and EXCLUSIVE.
- **          is true, or disable them if F is false.
+ */
+ #define SQLITE_SHM_UNLOCK       1
+ #define SQLITE_SHM_LOCK         2
+ #define SQLITE_SHM_SHARED       4
+ #define SQLITE_SHM_EXCLUSIVE    8
+ /*
+ ** CAPI3REF: Maximum xShmLock index
+ **
+ ** The xShmLock method on [sqlite3_io_methods] may use values
+ ** between 0 and this upper bound as its "offset" argument.
+ ** The SQLite core will never attempt to acquire or release a
+ ** lock outside of this range
+ */
+ #define SQLITE_SHM_NLOCK        8
+ /*
+ ** CAPI3REF: Initialize The SQLite Library
+ **
+ ** ^The sqlite3_initialize() routine initializes the
+ ** SQLite library.  ^The sqlite3_shutdown() routine
+ ** deallocates any resources that were allocated by sqlite3_initialize().
+ ** These routines are designed to aid in process initialization and
+ ** shutdown on embedded systems.  Workstation applications using
+ ** SQLite normally do not need to invoke either of these routines.
+ **
+ ** A call to sqlite3_initialize() is an "effective" call if it is
+ ** the first time sqlite3_initialize() is invoked during the lifetime of
+ ** the process, or if it is the first time sqlite3_initialize() is invoked
+ ** following a call to sqlite3_shutdown().  ^(Only an effective call
+ ** of sqlite3_initialize() does any initialization.  All other calls
+ ** are harmless no-ops.)^
+ **
+ ** A call to sqlite3_shutdown() is an "effective" call if it is the first
+ ** call to sqlite3_shutdown() since the last sqlite3_initialize().  ^(Only
+ ** an effective call to sqlite3_shutdown() does any deinitialization.
+ ** All other valid calls to sqlite3_shutdown() are harmless no-ops.)^
+ **
+ ** The sqlite3_initialize() interface is threadsafe, but sqlite3_shutdown()
+ ** is not.  The sqlite3_shutdown() interface must only be called from a
+ ** single thread.  All open [database connections] must be closed and all
+ ** other SQLite resources must be deallocated prior to invoking
+ ** sqlite3_shutdown().
+ **
+ ** Among other things, ^sqlite3_initialize() will invoke
+ ** sqlite3_os_init().  Similarly, ^sqlite3_shutdown()
+ ** will invoke sqlite3_os_end().
+ **
+ ** ^The sqlite3_initialize() routine returns [SQLITE_OK] on success.
+ ** ^If for some reason, sqlite3_initialize() is unable to initialize
+ ** the library (perhaps it is unable to allocate a needed resource such
+ ** as a mutex) it returns an [error code] other than [SQLITE_OK].
+ **
+ ** ^The sqlite3_initialize() routine is called internally by many other
+ ** SQLite interfaces so that an application usually does not need to
+ ** invoke sqlite3_initialize() directly.  For example, [sqlite3_open()]
+ ** calls sqlite3_initialize() so the SQLite library will be automatically
+ ** initialized when [sqlite3_open()] is called if it has not be initialized
+ ** already.  ^However, if SQLite is compiled with the [SQLITE_OMIT_AUTOINIT]
+ ** compile-time option, then the automatic calls to sqlite3_initialize()
+ ** are omitted and the application must call sqlite3_initialize() directly
+ ** prior to using any other SQLite interface.  For maximum portability,
+ ** it is recommended that applications always invoke sqlite3_initialize()
+ ** directly prior to using any other SQLite interface.  Future releases
+ ** of SQLite may require this.  In other words, the behavior exhibited
+ ** when SQLite is compiled with [SQLITE_OMIT_AUTOINIT] might become the
+ ** default behavior in some future release of SQLite.
+ **
+ ** The sqlite3_os_init() routine does operating-system specific
+ ** initialization of the SQLite library.  The sqlite3_os_end()
+ ** routine undoes the effect of sqlite3_os_init().  Typical tasks
+ ** performed by these routines include allocation or deallocation
+ ** of static resources, initialization of global variables,
+ ** setting up a default [sqlite3_vfs] module, or setting up
+ ** a default configuration using [sqlite3_config()].
+ **
+ ** The application should never invoke either sqlite3_os_init()
+ ** or sqlite3_os_end() directly.  The application should only invoke
+ ** sqlite3_initialize() and sqlite3_shutdown().  The sqlite3_os_init()
+ ** interface is called automatically by sqlite3_initialize() and
+ ** sqlite3_os_end() is called by sqlite3_shutdown().  Appropriate
+ ** implementations for sqlite3_os_init() and sqlite3_os_end()
+ ** are built into SQLite when it is compiled for Unix, Windows, or OS/2.
+ ** When [custom builds | built for other platforms]
+ ** (using the [SQLITE_OS_OTHER=1] compile-time
+ ** option) the application must supply a suitable implementation for
+ ** sqlite3_os_init() and sqlite3_os_end().  An application-supplied
+ ** implementation of sqlite3_os_init() or sqlite3_os_end()
+ ** must return [SQLITE_OK] on success and some other [error code] upon
+ ** failure.
+ */
+ SQLITE_API int sqlite3_initialize(void);
+ SQLITE_API int sqlite3_shutdown(void);
+ SQLITE_API int sqlite3_os_init(void);
+ SQLITE_API int sqlite3_os_end(void);
+ /*
+ ** CAPI3REF: Configuring The SQLite Library
+ **
+ ** The sqlite3_config() interface is used to make global configuration
+ ** changes to SQLite in order to tune SQLite to the specific needs of
+ ** the application.  The default configuration is recommended for most
+ ** applications and so this routine is usually not necessary.  It is
+ ** provided to support rare applications with unusual needs.
+ **
+ ** The sqlite3_config() interface is not threadsafe.  The application
+ ** must insure that no other SQLite interfaces are invoked by other
+ ** threads while sqlite3_config() is running.  Furthermore, sqlite3_config()
+ ** may only be invoked prior to library initialization using
+ ** [sqlite3_initialize()] or after shutdown by [sqlite3_shutdown()].
+ ** ^If sqlite3_config() is called after [sqlite3_initialize()] and before
+ ** [sqlite3_shutdown()] then it will return SQLITE_MISUSE.
+ ** Note, however, that ^sqlite3_config() can be called as part of the
+ ** implementation of an application-defined [sqlite3_os_init()].
+ **
+ ** The first argument to sqlite3_config() is an integer
+ ** [configuration option] that determines
+ ** what property of SQLite is to be configured.  Subsequent arguments
+ ** vary depending on the [configuration option]
+ ** in the first argument.
+ **
+ ** ^When a configuration option is set, sqlite3_config() returns [SQLITE_OK].
+ ** ^If the option is unknown or SQLite is unable to set the option
+ ** then this routine returns a non-zero [error code].
+ */
+ SQLITE_API int sqlite3_config(int, ...);
+ /*
+ ** CAPI3REF: Configure database connections
+ **
+ ** The sqlite3_db_config() interface is used to make configuration
+ ** changes to a [database connection].  The interface is similar to
+ ** [sqlite3_config()] except that the changes apply to a single
+ ** [database connection] (specified in the first argument).
+ **
+ ** The second argument to sqlite3_db_config(D,V,...)  is the
+ ** [SQLITE_DBCONFIG_LOOKASIDE | configuration verb] - an integer code
+ ** that indicates what aspect of the [database connection] is being configured.
+ ** Subsequent arguments vary depending on the configuration verb.
+ **
+ ** ^Calls to sqlite3_db_config() return SQLITE_OK if and only if
+ ** the call is considered successful.
+ */
+ SQLITE_API int sqlite3_db_config(sqlite3*, int op, ...);
+ /*
+ ** CAPI3REF: Memory Allocation Routines
+ **
+ ** An instance of this object defines the interface between SQLite
+ ** and low-level memory allocation routines.
+ **
+ ** This object is used in only one place in the SQLite interface.
+ ** A pointer to an instance of this object is the argument to
+ ** [sqlite3_config()] when the configuration option is
+ ** [SQLITE_CONFIG_MALLOC] or [SQLITE_CONFIG_GETMALLOC].
+ ** By creating an instance of this object
+ ** and passing it to [sqlite3_config]([SQLITE_CONFIG_MALLOC])
+ ** during configuration, an application can specify an alternative
+ ** memory allocation subsystem for SQLite to use for all of its
+ ** dynamic memory needs.
+ **
+ ** Note that SQLite comes with several [built-in memory allocators]
+ ** that are perfectly adequate for the overwhelming majority of applications
+ ** and that this object is only useful to a tiny minority of applications
+ ** with specialized memory allocation requirements.  This object is
+ ** also used during testing of SQLite in order to specify an alternative
+ ** memory allocator that simulates memory out-of-memory conditions in
+ ** order to verify that SQLite recovers gracefully from such
+ ** conditions.
+ **
+ ** The xMalloc, xRealloc, and xFree methods must work like the
+ ** malloc(), realloc() and free() functions from the standard C library.
+ ** ^SQLite guarantees that the second argument to
+ ** xRealloc is always a value returned by a prior call to xRoundup.
+ **
+ ** xSize should return the allocated size of a memory allocation
+ ** previously obtained from xMalloc or xRealloc.  The allocated size
+ ** is always at least as big as the requested size but may be larger.
+ **
+ ** The xRoundup method returns what would be the allocated size of
+ ** a memory allocation given a particular requested size.  Most memory
+ ** allocators round up memory allocations at least to the next multiple
+ ** of 8.  Some allocators round up to a larger multiple or to a power of 2.
+ ** Every memory allocation request coming in through [sqlite3_malloc()]
+ ** or [sqlite3_realloc()] first calls xRoundup.  If xRoundup returns 0,
+ ** that causes the corresponding memory allocation to fail.
+ **
+ ** The xInit method initializes the memory allocator.  (For example,
+ ** it might allocate any require mutexes or initialize internal data
+ ** structures.  The xShutdown method is invoked (indirectly) by
+ ** [sqlite3_shutdown()] and should deallocate any resources acquired
+ ** by xInit.  The pAppData pointer is used as the only parameter to
+ ** xInit and xShutdown.
+ **
+ ** SQLite holds the [SQLITE_MUTEX_STATIC_MASTER] mutex when it invokes
+ ** the xInit method, so the xInit method need not be threadsafe.  The
+ ** xShutdown method is only called from [sqlite3_shutdown()] so it does
+ ** not need to be threadsafe either.  For all other methods, SQLite
+ ** holds the [SQLITE_MUTEX_STATIC_MEM] mutex as long as the
+ ** [SQLITE_CONFIG_MEMSTATUS] configuration option is turned on (which
+ ** it is by default) and so the methods are automatically serialized.
+ ** However, if [SQLITE_CONFIG_MEMSTATUS] is disabled, then the other
+ ** methods must be threadsafe or else make their own arrangements for
+ ** serialization.
+ **
+ ** SQLite will never invoke xInit() more than once without an intervening
+ ** call to xShutdown().
+ */
+ typedef struct sqlite3_mem_methods sqlite3_mem_methods;
+ struct sqlite3_mem_methods {
+   void *(*xMalloc)(int);         /* Memory allocation function */
+   void (*xFree)(void*);          /* Free a prior allocation */
+   void *(*xRealloc)(void*,int);  /* Resize an allocation */
+   int (*xSize)(void*);           /* Return the size of an allocation */
+   int (*xRoundup)(int);          /* Round up request size to allocation size */
+   int (*xInit)(void*);           /* Initialize the memory allocator */
+   void (*xShutdown)(void*);      /* Deinitialize the memory allocator */
+   void *pAppData;                /* Argument to xInit() and xShutdown() */
+ };
+ /*
+ ** CAPI3REF: Configuration Options
+ ** KEYWORDS: {configuration option}
+ **
+ ** These constants are the available integer configuration options that
+ ** can be passed as the first argument to the [sqlite3_config()] interface.
+ **
+ ** New configuration options may be added in future releases of SQLite.
+ ** Existing configuration options might be discontinued.  Applications
+ ** should check the return code from [sqlite3_config()] to make sure that
+ ** the call worked.  The [sqlite3_config()] interface will return a
+ ** non-zero [error code] if a discontinued or unsupported configuration option
+ ** is invoked.
+ **
+ ** <dl>
+ ** [[SQLITE_CONFIG_SINGLETHREAD]] <dt>SQLITE_CONFIG_SINGLETHREAD</dt>
+ ** <dd>There are no arguments to this option.  ^This option sets the
+ ** [threading mode] to Single-thread.  In other words, it disables
+ ** all mutexing and puts SQLite into a mode where it can only be used
+ ** by a single thread.   ^If SQLite is compiled with
+ ** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
+ ** it is not possible to change the [threading mode] from its default
+ ** value of Single-thread and so [sqlite3_config()] will return
+ ** [SQLITE_ERROR] if called with the SQLITE_CONFIG_SINGLETHREAD
+ ** configuration option.</dd>
+ **
+ ** [[SQLITE_CONFIG_MULTITHREAD]] <dt>SQLITE_CONFIG_MULTITHREAD</dt>
+ ** <dd>There are no arguments to this option.  ^This option sets the
+ ** [threading mode] to Multi-thread.  In other words, it disables
+ ** mutexing on [database connection] and [prepared statement] objects.
+ ** The application is responsible for serializing access to
+ ** [database connections] and [prepared statements].  But other mutexes
+ ** are enabled so that SQLite will be safe to use in a multi-threaded
+ ** environment as long as no two threads attempt to use the same
+ ** [database connection] at the same time.  ^If SQLite is compiled with
+ ** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
+ ** it is not possible to set the Multi-thread [threading mode] and
+ ** [sqlite3_config()] will return [SQLITE_ERROR] if called with the
+ ** SQLITE_CONFIG_MULTITHREAD configuration option.</dd>
+ **
+ ** [[SQLITE_CONFIG_SERIALIZED]] <dt>SQLITE_CONFIG_SERIALIZED</dt>
+ ** <dd>There are no arguments to this option.  ^This option sets the
+ ** [threading mode] to Serialized. In other words, this option enables
+ ** all mutexes including the recursive
+ ** mutexes on [database connection] and [prepared statement] objects.
+ ** In this mode (which is the default when SQLite is compiled with
+ ** [SQLITE_THREADSAFE=1]) the SQLite library will itself serialize access
+ ** to [database connections] and [prepared statements] so that the
+ ** application is free to use the same [database connection] or the
+ ** same [prepared statement] in different threads at the same time.
+ ** ^If SQLite is compiled with
+ ** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
+ ** it is not possible to set the Serialized [threading mode] and
+ ** [sqlite3_config()] will return [SQLITE_ERROR] if called with the
+ ** SQLITE_CONFIG_SERIALIZED configuration option.</dd>
+ **
+ ** [[SQLITE_CONFIG_MALLOC]] <dt>SQLITE_CONFIG_MALLOC</dt>
+ ** <dd> ^(This option takes a single argument which is a pointer to an
+ ** instance of the [sqlite3_mem_methods] structure.  The argument specifies
+ ** alternative low-level memory allocation routines to be used in place of
+ ** the memory allocation routines built into SQLite.)^ ^SQLite makes
+ ** its own private copy of the content of the [sqlite3_mem_methods] structure
+ ** before the [sqlite3_config()] call returns.</dd>
+ **
+ ** [[SQLITE_CONFIG_GETMALLOC]] <dt>SQLITE_CONFIG_GETMALLOC</dt>
+ ** <dd> ^(This option takes a single argument which is a pointer to an
+ ** instance of the [sqlite3_mem_methods] structure.  The [sqlite3_mem_methods]
+ ** structure is filled with the currently defined memory allocation routines.)^
+ ** This option can be used to overload the default memory allocation
+ ** routines with a wrapper that simulations memory allocation failure or
+ ** tracks memory usage, for example. </dd>
+ **
+ ** [[SQLITE_CONFIG_MEMSTATUS]] <dt>SQLITE_CONFIG_MEMSTATUS</dt>
+ ** <dd> ^This option takes single argument of type int, interpreted as a
+ ** boolean, which enables or disables the collection of memory allocation
+ ** statistics. ^(When memory allocation statistics are disabled, the
+ ** following SQLite interfaces become non-operational:
+ **   <ul>
+ **   <li> [sqlite3_memory_used()]
+ **   <li> [sqlite3_memory_highwater()]
+ **   <li> [sqlite3_soft_heap_limit64()]
+ **   <li> [sqlite3_status()]
+ **   </ul>)^
+ ** ^Memory allocation statistics are enabled by default unless SQLite is
+ ** compiled with [SQLITE_DEFAULT_MEMSTATUS]=0 in which case memory
+ ** allocation statistics are disabled by default.
+ ** </dd>
+ **
+ ** [[SQLITE_CONFIG_SCRATCH]] <dt>SQLITE_CONFIG_SCRATCH</dt>
+ ** <dd> ^This option specifies a static memory buffer that SQLite can use for
+ ** scratch memory.  There are three arguments:  A pointer an 8-byte
+ ** aligned memory buffer from which the scratch allocations will be
+ ** drawn, the size of each scratch allocation (sz),
+ ** and the maximum number of scratch allocations (N).  The sz
+ ** argument must be a multiple of 16.
+ ** The first argument must be a pointer to an 8-byte aligned buffer
+ ** of at least sz*N bytes of memory.
+ ** ^SQLite will use no more than two scratch buffers per thread.  So
+ ** N should be set to twice the expected maximum number of threads.
+ ** ^SQLite will never require a scratch buffer that is more than 6
+ ** times the database page size. ^If SQLite needs needs additional
+ ** scratch memory beyond what is provided by this configuration option, then
+ ** [sqlite3_malloc()] will be used to obtain the memory needed.</dd>
+ **
+ ** [[SQLITE_CONFIG_PAGECACHE]] <dt>SQLITE_CONFIG_PAGECACHE</dt>
+ ** <dd> ^This option specifies a static memory buffer that SQLite can use for
+ ** the database page cache with the default page cache implementation.
+ ** This configuration should not be used if an application-define page
+ ** cache implementation is loaded using the SQLITE_CONFIG_PCACHE2 option.
+ ** There are three arguments to this option: A pointer to 8-byte aligned
+ ** memory, the size of each page buffer (sz), and the number of pages (N).
+ ** The sz argument should be the size of the largest database page
+ ** (a power of two between 512 and 32768) plus a little extra for each
+ ** page header.  ^The page header size is 20 to 40 bytes depending on
+ ** the host architecture.  ^It is harmless, apart from the wasted memory,
+ ** to make sz a little too large.  The first
+ ** argument should point to an allocation of at least sz*N bytes of memory.
+ ** ^SQLite will use the memory provided by the first argument to satisfy its
+ ** memory needs for the first N pages that it adds to cache.  ^If additional
+ ** page cache memory is needed beyond what is provided by this option, then
+ ** SQLite goes to [sqlite3_malloc()] for the additional storage space.
+ ** The pointer in the first argument must
+ ** be aligned to an 8-byte boundary or subsequent behavior of SQLite
+ ** will be undefined.</dd>
+ **
+ ** [[SQLITE_CONFIG_HEAP]] <dt>SQLITE_CONFIG_HEAP</dt>
+ ** <dd> ^This option specifies a static memory buffer that SQLite will use
+ ** for all of its dynamic memory allocation needs beyond those provided
+ ** for by [SQLITE_CONFIG_SCRATCH] and [SQLITE_CONFIG_PAGECACHE].
+ ** There are three arguments: An 8-byte aligned pointer to the memory,
+ ** the number of bytes in the memory buffer, and the minimum allocation size.
+ ** ^If the first pointer (the memory pointer) is NULL, then SQLite reverts
+ ** to using its default memory allocator (the system malloc() implementation),
+ ** undoing any prior invocation of [SQLITE_CONFIG_MALLOC].  ^If the
+ ** memory pointer is not NULL and either [SQLITE_ENABLE_MEMSYS3] or
+ ** [SQLITE_ENABLE_MEMSYS5] are defined, then the alternative memory
+ ** allocator is engaged to handle all of SQLites memory allocation needs.
+ ** The first pointer (the memory pointer) must be aligned to an 8-byte
+ ** boundary or subsequent behavior of SQLite will be undefined.
+ ** The minimum allocation size is capped at 2**12. Reasonable values
+ ** for the minimum allocation size are 2**5 through 2**8.</dd>
+ **
+ ** [[SQLITE_CONFIG_MUTEX]] <dt>SQLITE_CONFIG_MUTEX</dt>
+ ** <dd> ^(This option takes a single argument which is a pointer to an
+ ** instance of the [sqlite3_mutex_methods] structure.  The argument specifies
+ ** alternative low-level mutex routines to be used in place
+ ** the mutex routines built into SQLite.)^  ^SQLite makes a copy of the
+ ** content of the [sqlite3_mutex_methods] structure before the call to
+ ** [sqlite3_config()] returns. ^If SQLite is compiled with
+ ** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
+ ** the entire mutexing subsystem is omitted from the build and hence calls to
+ ** [sqlite3_config()] with the SQLITE_CONFIG_MUTEX configuration option will
+ ** return [SQLITE_ERROR].</dd>
+ **
+ ** [[SQLITE_CONFIG_GETMUTEX]] <dt>SQLITE_CONFIG_GETMUTEX</dt>
+ ** <dd> ^(This option takes a single argument which is a pointer to an
+ ** instance of the [sqlite3_mutex_methods] structure.  The
+ ** [sqlite3_mutex_methods]
+ ** structure is filled with the currently defined mutex routines.)^
+ ** This option can be used to overload the default mutex allocation
+ ** routines with a wrapper used to track mutex usage for performance
+ ** profiling or testing, for example.   ^If SQLite is compiled with
+ ** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
+ ** the entire mutexing subsystem is omitted from the build and hence calls to
+ ** [sqlite3_config()] with the SQLITE_CONFIG_GETMUTEX configuration option will
+ ** return [SQLITE_ERROR].</dd>
+ **
+ ** [[SQLITE_CONFIG_LOOKASIDE]] <dt>SQLITE_CONFIG_LOOKASIDE</dt>
+ ** <dd> ^(This option takes two arguments that determine the default
+ ** memory allocation for the lookaside memory allocator on each
+ ** [database connection].  The first argument is the
+ ** size of each lookaside buffer slot and the second is the number of
+ ** slots allocated to each database connection.)^  ^(This option sets the
+ ** <i>default</i> lookaside size. The [SQLITE_DBCONFIG_LOOKASIDE]
+ ** verb to [sqlite3_db_config()] can be used to change the lookaside
+ ** configuration on individual connections.)^ </dd>
+ **
+ ** [[SQLITE_CONFIG_PCACHE2]] <dt>SQLITE_CONFIG_PCACHE2</dt>
+ ** <dd> ^(This option takes a single argument which is a pointer to
+ ** an [sqlite3_pcache_methods2] object.  This object specifies the interface
+ ** to a custom page cache implementation.)^  ^SQLite makes a copy of the
+ ** object and uses it for page cache memory allocations.</dd>
+ **
+ ** [[SQLITE_CONFIG_GETPCACHE2]] <dt>SQLITE_CONFIG_GETPCACHE2</dt>
+ ** <dd> ^(This option takes a single argument which is a pointer to an
+ ** [sqlite3_pcache_methods2] object.  SQLite copies of the current
+ ** page cache implementation into that object.)^ </dd>
+ **
+ ** [[SQLITE_CONFIG_LOG]] <dt>SQLITE_CONFIG_LOG</dt>
+ ** <dd> The SQLITE_CONFIG_LOG option is used to configure the SQLite
+ ** global [error log].
+ ** (^The SQLITE_CONFIG_LOG option takes two arguments: a pointer to a
+ ** function with a call signature of void(*)(void*,int,const char*),
+ ** and a pointer to void. ^If the function pointer is not NULL, it is
+ ** invoked by [sqlite3_log()] to process each logging event.  ^If the
+ ** function pointer is NULL, the [sqlite3_log()] interface becomes a no-op.
+ ** ^The void pointer that is the second argument to SQLITE_CONFIG_LOG is
+ ** passed through as the first parameter to the application-defined logger
+ ** function whenever that function is invoked.  ^The second parameter to
+ ** the logger function is a copy of the first parameter to the corresponding
+ ** [sqlite3_log()] call and is intended to be a [result code] or an
+ ** [extended result code].  ^The third parameter passed to the logger is
+ ** log message after formatting via [sqlite3_snprintf()].
+ ** The SQLite logging interface is not reentrant; the logger function
+ ** supplied by the application must not invoke any SQLite interface.
+ ** In a multi-threaded application, the application-defined logger
+ ** function must be threadsafe. </dd>
+ **
+ ** [[SQLITE_CONFIG_URI]] <dt>SQLITE_CONFIG_URI
+ ** <dd>^(This option takes a single argument of type int. If non-zero, then
+ ** URI handling is globally enabled. If the parameter is zero, then URI handling
+ ** is globally disabled.)^ ^If URI handling is globally enabled, all filenames
+ ** passed to [sqlite3_open()], [sqlite3_open_v2()], [sqlite3_open16()] or
+ ** specified as part of [ATTACH] commands are interpreted as URIs, regardless
+ ** of whether or not the [SQLITE_OPEN_URI] flag is set when the database
+ ** connection is opened. ^If it is globally disabled, filenames are
+ ** only interpreted as URIs if the SQLITE_OPEN_URI flag is set when the
+ ** database connection is opened. ^(By default, URI handling is globally
+ ** disabled. The default value may be changed by compiling with the
+ ** [SQLITE_USE_URI] symbol defined.)^
+ **
+ ** [[SQLITE_CONFIG_COVERING_INDEX_SCAN]] <dt>SQLITE_CONFIG_COVERING_INDEX_SCAN
+ ** <dd>^This option takes a single integer argument which is interpreted as
+ ** a boolean in order to enable or disable the use of covering indices for
+ ** full table scans in the query optimizer.  ^The default setting is determined
+ ** by the [SQLITE_ALLOW_COVERING_INDEX_SCAN] compile-time option, or is "on"
+ ** if that compile-time option is omitted.
+ ** The ability to disable the use of covering indices for full table scans
+ ** is because some incorrectly coded legacy applications might malfunction
+ ** when the optimization is enabled.  Providing the ability to
+ ** disable the optimization allows the older, buggy application code to work
+ ** without change even with newer versions of SQLite.
+ **
+ ** [[SQLITE_CONFIG_PCACHE]] [[SQLITE_CONFIG_GETPCACHE]]
+ ** <dt>SQLITE_CONFIG_PCACHE and SQLITE_CONFIG_GETPCACHE
+ ** <dd> These options are obsolete and should not be used by new code.
+ ** They are retained for backwards compatibility but are now no-ops.
+ ** </dd>
+ **
+ ** [[SQLITE_CONFIG_SQLLOG]]
+ ** <dt>SQLITE_CONFIG_SQLLOG
+ ** <dd>This option is only available if sqlite is compiled with the
+ ** [SQLITE_ENABLE_SQLLOG] pre-processor macro defined. The first argument should
+ ** be a pointer to a function of type void(*)(void*,sqlite3*,const char*, int).
+ ** The second should be of type (void*). The callback is invoked by the library
+ ** in three separate circumstances, identified by the value passed as the
+ ** fourth parameter. If the fourth parameter is 0, then the database connection
+ ** passed as the second argument has just been opened. The third argument
+ ** points to a buffer containing the name of the main database file. If the
+ ** fourth parameter is 1, then the SQL statement that the third parameter
+ ** points to has just been executed. Or, if the fourth parameter is 2, then
+ ** the connection being passed as the second parameter is being closed. The
+ ** third parameter is passed NULL In this case.  An example of using this
+ ** configuration option can be seen in the "test_sqllog.c" source file in
+ ** the canonical SQLite source tree.</dd>
+ **
+ ** [[SQLITE_CONFIG_MMAP_SIZE]]
+ ** <dt>SQLITE_CONFIG_MMAP_SIZE
+ ** <dd>^SQLITE_CONFIG_MMAP_SIZE takes two 64-bit integer (sqlite3_int64) values
+ ** that are the default mmap size limit (the default setting for
+ ** [PRAGMA mmap_size]) and the maximum allowed mmap size limit.
+ ** ^The default setting can be overridden by each database connection using
+ ** either the [PRAGMA mmap_size] command, or by using the
+ ** [SQLITE_FCNTL_MMAP_SIZE] file control.  ^(The maximum allowed mmap size
+ ** cannot be changed at run-time.  Nor may the maximum allowed mmap size
+ ** exceed the compile-time maximum mmap size set by the
+ ** [SQLITE_MAX_MMAP_SIZE] compile-time option.)^
+ ** ^If either argument to this option is negative, then that argument is
+ ** changed to its compile-time default.
+ ** </dl>
+ */
+ #define SQLITE_CONFIG_SINGLETHREAD  1  /* nil */
+ #define SQLITE_CONFIG_MULTITHREAD   2  /* nil */
+ #define SQLITE_CONFIG_SERIALIZED    3  /* nil */
+ #define SQLITE_CONFIG_MALLOC        4  /* sqlite3_mem_methods* */
+ #define SQLITE_CONFIG_GETMALLOC     5  /* sqlite3_mem_methods* */
+ #define SQLITE_CONFIG_SCRATCH       6  /* void*, int sz, int N */
+ #define SQLITE_CONFIG_PAGECACHE     7  /* void*, int sz, int N */
+ #define SQLITE_CONFIG_HEAP          8  /* void*, int nByte, int min */
+ #define SQLITE_CONFIG_MEMSTATUS     9  /* boolean */
+ #define SQLITE_CONFIG_MUTEX        10  /* sqlite3_mutex_methods* */
+ #define SQLITE_CONFIG_GETMUTEX     11  /* sqlite3_mutex_methods* */
+ /* previously SQLITE_CONFIG_CHUNKALLOC 12 which is now unused. */
+ #define SQLITE_CONFIG_LOOKASIDE    13  /* int int */
+ #define SQLITE_CONFIG_PCACHE       14  /* no-op */
+ #define SQLITE_CONFIG_GETPCACHE    15  /* no-op */
+ #define SQLITE_CONFIG_LOG          16  /* xFunc, void* */
+ #define SQLITE_CONFIG_URI          17  /* int */
+ #define SQLITE_CONFIG_PCACHE2      18  /* sqlite3_pcache_methods2* */
+ #define SQLITE_CONFIG_GETPCACHE2   19  /* sqlite3_pcache_methods2* */
+ #define SQLITE_CONFIG_COVERING_INDEX_SCAN 20  /* int */
+ #define SQLITE_CONFIG_SQLLOG       21  /* xSqllog, void* */
+ #define SQLITE_CONFIG_MMAP_SIZE    22  /* sqlite3_int64, sqlite3_int64 */
+ /*
+ ** CAPI3REF: Database Connection Configuration Options
+ **
+ ** These constants are the available integer configuration options that
+ ** can be passed as the second argument to the [sqlite3_db_config()] interface.
+ **
+ ** New configuration options may be added in future releases of SQLite.
+ ** Existing configuration options might be discontinued.  Applications
+ ** should check the return code from [sqlite3_db_config()] to make sure that
+ ** the call worked.  ^The [sqlite3_db_config()] interface will return a
+ ** non-zero [error code] if a discontinued or unsupported configuration option
+ ** is invoked.
+ **
+ ** <dl>
+ ** <dt>SQLITE_DBCONFIG_LOOKASIDE</dt>
+ ** <dd> ^This option takes three additional arguments that determine the
+ ** [lookaside memory allocator] configuration for the [database connection].
+ ** ^The first argument (the third parameter to [sqlite3_db_config()] is a
+ ** pointer to a memory buffer to use for lookaside memory.
+ ** ^The first argument after the SQLITE_DBCONFIG_LOOKASIDE verb
+ ** may be NULL in which case SQLite will allocate the
+ ** lookaside buffer itself using [sqlite3_malloc()]. ^The second argument is the
+ ** size of each lookaside buffer slot.  ^The third argument is the number of
+ ** slots.  The size of the buffer in the first argument must be greater than
+ ** or equal to the product of the second and third arguments.  The buffer
+ ** must be aligned to an 8-byte boundary.  ^If the second argument to
+ ** SQLITE_DBCONFIG_LOOKASIDE is not a multiple of 8, it is internally
+ ** rounded down to the next smaller multiple of 8.  ^(The lookaside memory
+ ** configuration for a database connection can only be changed when that
+ ** connection is not currently using lookaside memory, or in other words
+ ** when the "current value" returned by
+ ** [sqlite3_db_status](D,[SQLITE_CONFIG_LOOKASIDE],...) is zero.
+ ** Any attempt to change the lookaside memory configuration when lookaside
+ ** memory is in use leaves the configuration unchanged and returns
+ ** [SQLITE_BUSY].)^</dd>
+ **
+ ** <dt>SQLITE_DBCONFIG_ENABLE_FKEY</dt>
+ ** <dd> ^This option is used to enable or disable the enforcement of
+ ** [foreign key constraints].  There should be two additional arguments.
+ ** The first argument is an integer which is 0 to disable FK enforcement,
+ ** positive to enable FK enforcement or negative to leave FK enforcement
+ ** unchanged.  The second parameter is a pointer to an integer into which
+ ** is written 0 or 1 to indicate whether FK enforcement is off or on
+ ** following this call.  The second parameter may be a NULL pointer, in
+ ** which case the FK enforcement setting is not reported back. </dd>
+ **
+ ** <dt>SQLITE_DBCONFIG_ENABLE_TRIGGER</dt>
+ ** <dd> ^This option is used to enable or disable [CREATE TRIGGER | triggers].
+ ** There should be two additional arguments.
+ ** The first argument is an integer which is 0 to disable triggers,
+ ** positive to enable triggers or negative to leave the setting unchanged.
+ ** The second parameter is a pointer to an integer into which
+ ** is written 0 or 1 to indicate whether triggers are disabled or enabled
+ ** following this call.  The second parameter may be a NULL pointer, in
+ ** which case the trigger setting is not reported back. </dd>
+ **
+ ** </dl>
+ */
+ #define SQLITE_DBCONFIG_LOOKASIDE       1001  /* void* int int */
+ #define SQLITE_DBCONFIG_ENABLE_FKEY     1002  /* int int* */
+ #define SQLITE_DBCONFIG_ENABLE_TRIGGER  1003  /* int int* */
+ /*
+ ** CAPI3REF: Enable Or Disable Extended Result Codes
+ **
+ ** ^The sqlite3_extended_result_codes() routine enables or disables the
+ ** [extended result codes] feature of SQLite. ^The extended result
+ ** codes are disabled by default for historical compatibility.
  */
- int sqlite3_extended_result_codes(sqlite3*, int onoff);
+ SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff);
  /*
- ** CAPI3REF: Last Insert Rowid {F12220}
+ ** CAPI3REF: Last Insert Rowid
  **
- ** Each entry in an SQLite table has a unique 64-bit signed
+ ** ^Each entry in an SQLite table has a unique 64-bit signed
- ** integer key called the "rowid". The rowid is always available
+ ** integer key called the [ROWID | "rowid"]. ^The rowid is always available
  ** as an undeclared column named ROWID, OID, or _ROWID_ as long as those
- ** names are not also used by explicitly declared columns. If
+ ** names are not also used by explicitly declared columns. ^If
- ** the table has a column of type INTEGER PRIMARY KEY then that column
+ ** the table has a column of type [INTEGER PRIMARY KEY] then that column
  ** is another alias for the rowid.
  **
- ** This routine returns the rowid of the most recent
+ ** ^This routine returns the [rowid] of the most recent
- ** successful INSERT into the database from the database connection
+ ** successful [INSERT] into the database from the [database connection]
- ** shown in the first argument.  If no successful inserts
+ ** in the first argument.  ^As of SQLite version 3.7.7, this routines
- ** have ever occurred on this database connection, zero is returned.
+ ** records the last insert rowid of both ordinary tables and [virtual tables].
- **
+ ** ^If no successful [INSERT]s
- ** If an INSERT occurs within a trigger, then the rowid of the
+ ** have ever occurred on that database connection, zero is returned.
- ** inserted row is returned by this routine as long as the trigger
+ **
- ** is running.  But once the trigger terminates, the value returned
+ ** ^(If an [INSERT] occurs within a trigger or within a [virtual table]
- ** by this routine reverts to the last value inserted before the
+ ** method, then this routine will return the [rowid] of the inserted
- ** trigger fired.
+ ** row as long as the trigger or virtual table method is running.
- **
+ ** But once the trigger or virtual table method ends, the value returned
- ** An INSERT that fails due to a constraint violation is not a
+ ** by this routine reverts to what it was before the trigger or virtual
- ** successful insert and does not change the value returned by this
+ ** table method began.)^
- ** routine.  Thus INSERT OR FAIL, INSERT OR IGNORE, INSERT OR ROLLBACK,
+ **
+ ** ^An [INSERT] that fails due to a constraint violation is not a
+ ** successful [INSERT] and does not change the value returned by this
+ ** routine.  ^Thus INSERT OR FAIL, INSERT OR IGNORE, INSERT OR ROLLBACK,
  ** and INSERT OR ABORT make no changes to the return value of this
- ** routine when their insertion fails.  When INSERT OR REPLACE
+ ** routine when their insertion fails.  ^(When INSERT OR REPLACE
  ** encounters a constraint violation, it does not fail.  The
  ** INSERT continues to completion after deleting rows that caused
  ** the constraint problem so INSERT OR REPLACE will always change
- ** the return value of this interface.
+ ** the return value of this interface.)^
  **
- ** For the purposes of this routine, an insert is considered to
+ ** ^For the purposes of this routine, an [INSERT] is considered to
  ** be successful even if it is subsequently rolled back.
  **
- ** INVARIANTS:
+ ** This function is accessible to SQL statements via the
- **
+ ** [last_insert_rowid() SQL function].
- ** {F12221} The [sqlite3_last_insert_rowid()] function returns the
- **          rowid of the most recent successful insert done
- **          on the same database connection and within the same
- **          trigger context, or zero if there have
- **          been no qualifying inserts on that connection.
- **
- ** {F12223} The [sqlite3_last_insert_rowid()] function returns
- **          same value when called from the same trigger context
- **          immediately before and after a ROLLBACK.
- **
- ** LIMITATIONS:
  **
- ** {U12232} If a separate thread does a new insert on the same
+ ** If a separate thread performs a new [INSERT] on the same
- **          database connection while the [sqlite3_last_insert_rowid()]
+ ** database connection while the [sqlite3_last_insert_rowid()]
- **          function is running and thus changes the last insert rowid,
+ ** function is running and thus changes the last insert [rowid],
- **          then the value returned by [sqlite3_last_insert_rowid()] is
+ ** then the value returned by [sqlite3_last_insert_rowid()] is
- **          unpredictable and might not equal either the old or the new
+ ** unpredictable and might not equal either the old or the new
- **          last insert rowid.
+ ** last insert [rowid].
  */
- sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*);
+ SQLITE_API sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*);
  /*
- ** CAPI3REF: Count The Number Of Rows Modified {F12240}
+ ** CAPI3REF: Count The Number Of Rows Modified
  **
- ** This function returns the number of database rows that were changed
+ ** ^This function returns the number of database rows that were changed
  ** or inserted or deleted by the most recently completed SQL statement
- ** on the connection specified by the first parameter.  Only
+ ** on the [database connection] specified by the first parameter.
- ** changes that are directly specified by the INSERT, UPDATE, or
+ ** ^(Only changes that are directly specified by the [INSERT], [UPDATE],
- ** DELETE statement are counted.  Auxiliary changes caused by
+ ** or [DELETE] statement are counted.  Auxiliary changes caused by
- ** triggers are not counted. Use the [sqlite3_total_changes()] function
+ ** triggers or [foreign key actions] are not counted.)^ Use the
- ** to find the total number of changes including changes caused by triggers.
+ ** [sqlite3_total_changes()] function to find the total number of changes
+ ** including changes caused by triggers and foreign key actions.
  **
- ** A "row change" is a change to a single row of a single table
+ ** ^Changes to a view that are simulated by an [INSTEAD OF trigger]
+ ** are not counted.  Only real table changes are counted.
+ **
+ ** ^(A "row change" is a change to a single row of a single table
  ** caused by an INSERT, DELETE, or UPDATE statement.  Rows that
- ** are changed as side effects of REPLACE constraint resolution,
+ ** are changed as side effects of [REPLACE] constraint resolution,
- ** rollback, ABORT processing, DROP TABLE, or by any other
+ ** rollback, ABORT processing, [DROP TABLE], or by any other
- ** mechanisms do not count as direct row changes.
+ ** mechanisms do not count as direct row changes.)^
  **
  ** A "trigger context" is a scope of execution that begins and
- ** ends with the script of a trigger.  Most SQL statements are
+ ** ends with the script of a [CREATE TRIGGER | trigger].
+ ** Most SQL statements are
  ** evaluated outside of any trigger.  This is the "top level"
  ** trigger context.  If a trigger fires from the top level, a
  ** new trigger context is entered for the duration of that one
  ** trigger.  Subtriggers create subcontexts for their duration.
  **
- ** Calling [sqlite3_exec()] or [sqlite3_step()] recursively does
+ ** ^Calling [sqlite3_exec()] or [sqlite3_step()] recursively does
  ** not create a new trigger context.
  **
- ** This function returns the number of direct row changes in the
+ ** ^This function returns the number of direct row changes in the
  ** most recent INSERT, UPDATE, or DELETE statement within the same
  ** trigger context.
  **
- ** So when called from the top level, this function returns the
+ ** ^Thus, when called from the top level, this function returns the
  ** number of changes in the most recent INSERT, UPDATE, or DELETE
- ** that also occurred at the top level.
+ ** that also occurred at the top level.  ^(Within the body of a trigger,
- ** Within the body of a trigger, the sqlite3_changes() interface
+ ** the sqlite3_changes() interface can be called to find the number of
- ** can be called to find the number of
  ** changes in the most recently completed INSERT, UPDATE, or DELETE
  ** statement within the body of the same trigger.
- ** However, the number returned does not include in changes
+ ** However, the number returned does not include changes
- ** caused by subtriggers since they have their own context.
+ ** caused by subtriggers since those have their own context.)^
  **
- ** SQLite implements the command "DELETE FROM table" without
+ ** See also the [sqlite3_total_changes()] interface, the
- ** a WHERE clause by dropping and recreating the table.  (This is much
+ ** [count_changes pragma], and the [changes() SQL function].
- ** faster than going through and deleting individual elements from the
- ** table.)  Because of this optimization, the deletions in
- ** "DELETE FROM table" are not row changes and will not be counted
- ** by the sqlite3_changes() or [sqlite3_total_changes()] functions.
- ** To get an accurate count of the number of rows deleted, use
- ** "DELETE FROM table WHERE 1" instead.
- **
- ** INVARIANTS:
- **
- ** {F12241} The [sqlite3_changes()] function returns the number of
- **          row changes caused by the most recent INSERT, UPDATE,
- **          or DELETE statement on the same database connection and
- **          within the same trigger context, or zero if there have
- **          not been any qualifying row changes.
- **
- ** LIMITATIONS:
- **
- ** {U12252} If a separate thread makes changes on the same database connection
- **          while [sqlite3_changes()] is running then the value returned
- **          is unpredictable and unmeaningful.
- */
- int sqlite3_changes(sqlite3*);
- /*
- ** CAPI3REF: Total Number Of Rows Modified {F12260}
- ***
- ** This function returns the number of row changes caused
- ** by INSERT, UPDATE or DELETE statements since the database handle
- ** was opened.  The count includes all changes from all trigger
- ** contexts.  But the count does not include changes used to
- ** implement REPLACE constraints, do rollbacks or ABORT processing,
- ** or DROP table processing.
- ** The changes
- ** are counted as soon as the statement that makes them is completed
- ** (when the statement handle is passed to [sqlite3_reset()] or
- ** [sqlite3_finalize()]).
- **
- ** SQLite implements the command "DELETE FROM table" without
- ** a WHERE clause by dropping and recreating the table.  (This is much
- ** faster than going
- ** through and deleting individual elements from the table.)  Because of
- ** this optimization, the change count for "DELETE FROM table" will be
- ** zero regardless of the number of elements that were originally in the
- ** table. To get an accurate count of the number of rows deleted, use
- ** "DELETE FROM table WHERE 1" instead.
  **
- ** See also the [sqlite3_changes()] interface.
+ ** If a separate thread makes changes on the same database connection
+ ** while [sqlite3_changes()] is running then the value returned
+ ** is unpredictable and not meaningful.
+ */
+ SQLITE_API int sqlite3_changes(sqlite3*);
+ /*
+ ** CAPI3REF: Total Number Of Rows Modified
  **
- ** INVARIANTS:
+ ** ^This function returns the number of row changes caused by [INSERT],
- **
+ ** [UPDATE] or [DELETE] statements since the [database connection] was opened.
- ** {F12261} The [sqlite3_total_changes()] returns the total number
+ ** ^(The count returned by sqlite3_total_changes() includes all changes
- **          of row changes caused by INSERT, UPDATE, and/or DELETE
+ ** from all [CREATE TRIGGER | trigger] contexts and changes made by
- **          statements on the same [database connection], in any
+ ** [foreign key actions]. However,
- **          trigger context, since the database connection was
+ ** the count does not include changes used to implement [REPLACE] constraints,
- **          created.
+ ** do rollbacks or ABORT processing, or [DROP TABLE] processing.  The
+ ** count does not include rows of views that fire an [INSTEAD OF trigger],
+ ** though if the INSTEAD OF trigger makes changes of its own, those changes
+ ** are counted.)^
+ ** ^The sqlite3_total_changes() function counts the changes as soon as
+ ** the statement that makes them is completed (when the statement handle
+ ** is passed to [sqlite3_reset()] or [sqlite3_finalize()]).
  **
- ** LIMITATIONS:
+ ** See also the [sqlite3_changes()] interface, the
+ ** [count_changes pragma], and the [total_changes() SQL function].
  **
- ** {U12264} If a separate thread makes changes on the same database connection
+ ** If a separate thread makes changes on the same database connection
- **          while [sqlite3_total_changes()] is running then the value
+ ** while [sqlite3_total_changes()] is running then the value
- **          returned is unpredictable and unmeaningful.
+ ** returned is unpredictable and not meaningful.
  */
- int sqlite3_total_changes(sqlite3*);
+ SQLITE_API int sqlite3_total_changes(sqlite3*);
  /*
- ** CAPI3REF: Interrupt A Long-Running Query {F12270}
+ ** CAPI3REF: Interrupt A Long-Running Query
  **
- ** This function causes any pending database operation to abort and
+ ** ^This function causes any pending database operation to abort and
  ** return at its earliest opportunity. This routine is typically
  ** called in response to a user action such as pressing "Cancel"
  ** or Ctrl-C where the user wants a long query operation to halt
  ** immediately.
  **
- ** It is safe to call this routine from a thread different from the
+ ** ^It is safe to call this routine from a thread different from the
  ** thread that is currently running the database operation.  But it
- ** is not safe to call this routine with a database connection that
+ ** is not safe to call this routine with a [database connection] that
  ** is closed or might close before sqlite3_interrupt() returns.
  **
- ** If an SQL is very nearly finished at the time when sqlite3_interrupt()
+ ** ^If an SQL operation is very nearly finished at the time when
- ** is called, then it might not have an opportunity to be interrupted.
+ ** sqlite3_interrupt() is called, then it might not have an opportunity
- ** It might continue to completion.
+ ** to be interrupted and might continue to completion.
- ** An SQL operation that is interrupted will return
+ **
- ** [SQLITE_INTERRUPT].  If the interrupted SQL operation is an
+ ** ^An SQL operation that is interrupted will return [SQLITE_INTERRUPT].
- ** INSERT, UPDATE, or DELETE that is inside an explicit transaction,
+ ** ^If the interrupted SQL operation is an INSERT, UPDATE, or DELETE
- ** then the entire transaction will be rolled back automatically.
+ ** that is inside an explicit transaction, then the entire transaction
- ** A call to sqlite3_interrupt() has no effect on SQL statements
+ ** will be rolled back automatically.
- ** that are started after sqlite3_interrupt() returns.
+ **
- **
+ ** ^The sqlite3_interrupt(D) call is in effect until all currently running
- ** INVARIANTS:
+ ** SQL statements on [database connection] D complete.  ^Any new SQL statements
- **
+ ** that are started after the sqlite3_interrupt() call and before the
- ** {F12271} The [sqlite3_interrupt()] interface will force all running
+ ** running statements reaches zero are interrupted as if they had been
- **          SQL statements associated with the same database connection
+ ** running prior to the sqlite3_interrupt() call.  ^New SQL statements
- **          to halt after processing at most one additional row of
+ ** that are started after the running statement count reaches zero are
- **          data.
+ ** not effected by the sqlite3_interrupt().
- **
+ ** ^A call to sqlite3_interrupt(D) that occurs when there are no running
- ** {F12272} Any SQL statement that is interrupted by [sqlite3_interrupt()]
+ ** SQL statements is a no-op and has no effect on SQL statements
- **          will return [SQLITE_INTERRUPT].
+ ** that are started after the sqlite3_interrupt() call returns.
  **
- ** LIMITATIONS:
+ ** If the database connection closes while [sqlite3_interrupt()]
- **
+ ** is running then bad things will likely happen.
- ** {U12279} If the database connection closes while [sqlite3_interrupt()]
- **          is running then bad things will likely happen.
  */
- void sqlite3_interrupt(sqlite3*);
+ SQLITE_API void sqlite3_interrupt(sqlite3*);
  /*
- ** CAPI3REF: Determine If An SQL Statement Is Complete {F10510}
+ ** CAPI3REF: Determine If An SQL Statement Is Complete
  **
- ** These routines are useful for command-line input to determine if the
+ ** These routines are useful during command-line input to determine if the
- ** currently entered text seems to form complete a SQL statement or
+ ** currently entered text seems to form a complete SQL statement or
  ** if additional input is needed before sending the text into
- ** SQLite for parsing.  These routines return true if the input string
+ ** SQLite for parsing.  ^These routines return 1 if the input string
- ** appears to be a complete SQL statement.  A statement is judged to be
+ ** appears to be a complete SQL statement.  ^A statement is judged to be
- ** complete if it ends with a semicolon token and is not a fragment of a
+ ** complete if it ends with a semicolon token and is not a prefix of a
- ** CREATE TRIGGER statement.  Semicolons that are embedded within
+ ** well-formed CREATE TRIGGER statement.  ^Semicolons that are embedded within
  ** string literals or quoted identifier names or comments are not
  ** independent tokens (they are part of the token in which they are
- ** embedded) and thus do not count as a statement terminator.
+ ** embedded) and thus do not count as a statement terminator.  ^Whitespace
+ ** and comments that follow the final semicolon are ignored.
  **
- ** These routines do not parse the SQL and
+ ** ^These routines return 0 if the statement is incomplete.  ^If a
- ** so will not detect syntactically incorrect SQL.
+ ** memory allocation fails, then SQLITE_NOMEM is returned.
  **
- ** INVARIANTS:
+ ** ^These routines do not parse the SQL statements thus
+ ** will not detect syntactically incorrect SQL.
  **
- ** {F10511} The sqlite3_complete() and sqlite3_complete16() functions
+ ** ^(If SQLite has not been initialized using [sqlite3_initialize()] prior
- **          return true (non-zero) if and only if the last
+ ** to invoking sqlite3_complete16() then sqlite3_initialize() is invoked
- **          non-whitespace token in their input is a semicolon that
+ ** automatically by sqlite3_complete16().  If that initialization fails,
- **          is not in between the BEGIN and END of a CREATE TRIGGER
+ ** then the return value from sqlite3_complete16() will be non-zero
- **          statement.
+ ** regardless of whether or not the input SQL is complete.)^
  **
- ** LIMITATIONS:
+ ** The input to [sqlite3_complete()] must be a zero-terminated
+ ** UTF-8 string.
  **
- ** {U10512} The input to sqlite3_complete() must be a zero-terminated
+ ** The input to [sqlite3_complete16()] must be a zero-terminated
- **          UTF-8 string.
+ ** UTF-16 string in native byte order.
- **
- ** {U10513} The input to sqlite3_complete16() must be a zero-terminated
- **          UTF-16 string in native byte order.
  */
- int sqlite3_complete(const char *sql);
+ SQLITE_API int sqlite3_complete(const char *sql);
- int sqlite3_complete16(const void *sql);
+ SQLITE_API int sqlite3_complete16(const void *sql);
  /*
- ** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors {F12310}
+ ** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors
+ **
+ ** ^This routine sets a callback function that might be invoked whenever
+ ** an attempt is made to open a database table that another thread
+ ** or process has locked.
  **
- ** This routine identifies a callback function that might be
+ ** ^If the busy callback is NULL, then [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED]
- ** invoked whenever an attempt is made to open a database table
+ ** is returned immediately upon encountering the lock.  ^If the busy callback
- ** that another thread or process has locked.
+ ** is not NULL, then the callback might be invoked with two arguments.
- ** If the busy callback is NULL, then [SQLITE_BUSY]
+ **
- ** or [SQLITE_IOERR_BLOCKED]
+ ** ^The first argument to the busy handler is a copy of the void* pointer which
- ** is returned immediately upon encountering the lock.
+ ** is the third argument to sqlite3_busy_handler().  ^The second argument to
- ** If the busy callback is not NULL, then the
+ ** the busy handler callback is the number of times that the busy handler has
- ** callback will be invoked with two arguments.  The
+ ** been invoked for this locking event.  ^If the
- ** first argument to the handler is a copy of the void* pointer which
- ** is the third argument to this routine.  The second argument to
- ** the handler is the number of times that the busy handler has
- ** been invoked for this locking event.   If the
  ** busy callback returns 0, then no additional attempts are made to
  ** access the database and [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED] is returned.
- ** If the callback returns non-zero, then another attempt
+ ** ^If the callback returns non-zero, then another attempt
  ** is made to open the database for reading and the cycle repeats.
  **
- ** The presence of a busy handler does not guarantee that
+ ** The presence of a busy handler does not guarantee that it will be invoked
- ** it will be invoked when there is lock contention.
+ ** when there is lock contention. ^If SQLite determines that invoking the busy
- ** If SQLite determines that invoking the busy handler could result in
+ ** handler could result in a deadlock, it will go ahead and return [SQLITE_BUSY]
- ** a deadlock, it will go ahead and return [SQLITE_BUSY] or
+ ** or [SQLITE_IOERR_BLOCKED] instead of invoking the busy handler.
- ** [SQLITE_IOERR_BLOCKED] instead of invoking the
- ** busy handler.
  ** Consider a scenario where one process is holding a read lock that
  ** it is trying to promote to a reserved lock and
  ** a second process is holding a reserved lock that it is trying
- Line 1125  int sqlite3_complete16(const void *sql);
+ Line 2013  int sqlite3_complete16(const void *sql);
  ** will induce the first process to release its read lock and allow
  ** the second process to proceed.
  **
- ** The default busy callback is NULL.
+ ** ^The default busy callback is NULL.
  **
- ** The [SQLITE_BUSY] error is converted to [SQLITE_IOERR_BLOCKED]
+ ** ^The [SQLITE_BUSY] error is converted to [SQLITE_IOERR_BLOCKED]
  ** when SQLite is in the middle of a large transaction where all the
  ** changes will not fit into the in-memory cache.  SQLite will
  ** already hold a RESERVED lock on the database file, but it needs
  ** to promote this lock to EXCLUSIVE so that it can spill cache
  ** pages into the database file without harm to concurrent
- ** readers.  If it is unable to promote the lock, then the in-memory
+ ** readers.  ^If it is unable to promote the lock, then the in-memory
  ** cache will be left in an inconsistent state and so the error
  ** code is promoted from the relatively benign [SQLITE_BUSY] to
- ** the more severe [SQLITE_IOERR_BLOCKED].  This error code promotion
+ ** the more severe [SQLITE_IOERR_BLOCKED].  ^This error code promotion
  ** forces an automatic rollback of the changes.  See the
- ** <a href="http://www.sqlite.org/cvstrac/wiki?p=CorruptionFollowingBusyError">
+ ** <a href="/cvstrac/wiki?p=CorruptionFollowingBusyError">
  ** CorruptionFollowingBusyError</a> wiki page for a discussion of why
  ** this is important.
- **
- ** There can only be a single busy handler defined for each database
- ** connection.  Setting a new busy handler clears any previous one.
- ** Note that calling [sqlite3_busy_timeout()] will also set or clear
- ** the busy handler.
- **
- ** INVARIANTS:
- **
- ** {F12311} The [sqlite3_busy_handler()] function replaces the busy handler
- **          callback in the database connection identified by the 1st
- **          parameter with a new busy handler identified by the 2nd and 3rd
- **          parameters.
- **
- ** {F12312} The default busy handler for new database connections is NULL.
- **
- ** {F12314} When two or more database connection share a common cache,
- **          the busy handler for the database connection currently using
- **          the cache is invoked when the cache encounters a lock.
  **
- ** {F12316} If a busy handler callback returns zero, then the SQLite
+ ** ^(There can only be a single busy handler defined for each
- **          interface that provoked the locking event will return
+ ** [database connection].  Setting a new busy handler clears any
- **          [SQLITE_BUSY].
+ ** previously set handler.)^  ^Note that calling [sqlite3_busy_timeout()]
- **
+ ** will also set or clear the busy handler.
- ** {F12318} SQLite will invokes the busy handler with two argument which
+ **
- **          are a copy of the pointer supplied by the 3rd parameter to
+ ** The busy callback should not take any actions which modify the
- **          [sqlite3_busy_handler()] and a count of the number of prior
+ ** database connection that invoked the busy handler.  Any such actions
- **          invocations of the busy handler for the same locking event.
+ ** result in undefined behavior.
  **
- ** LIMITATIONS:
+ ** A busy handler must not close the database connection
- **
+ ** or [prepared statement] that invoked the busy handler.
- ** {U12319} A busy handler should not call close the database connection
- **          or prepared statement that invoked the busy handler.
  */
- int sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*);
+ SQLITE_API int sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*);
  /*
- ** CAPI3REF: Set A Busy Timeout {F12340}
+ ** CAPI3REF: Set A Busy Timeout
  **
- ** This routine sets a [sqlite3_busy_handler | busy handler]
+ ** ^This routine sets a [sqlite3_busy_handler | busy handler] that sleeps
- ** that sleeps for a while when a
+ ** for a specified amount of time when a table is locked.  ^The handler
- ** table is locked.  The handler will sleep multiple times until
+ ** will sleep multiple times until at least "ms" milliseconds of sleeping
- ** at least "ms" milliseconds of sleeping have been done. {F12343} After
+ ** have accumulated.  ^After at least "ms" milliseconds of sleeping,
- ** "ms" milliseconds of sleeping, the handler returns 0 which
+ ** the handler returns 0 which causes [sqlite3_step()] to return
- ** causes [sqlite3_step()] to return [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED].
+ ** [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED].
  **
- ** Calling this routine with an argument less than or equal to zero
+ ** ^Calling this routine with an argument less than or equal to zero
  ** turns off all busy handlers.
  **
- ** There can only be a single busy handler for a particular database
+ ** ^(There can only be a single busy handler for a particular
- ** connection.  If another busy handler was defined
+ ** [database connection] any any given moment.  If another busy handler
- ** (using [sqlite3_busy_handler()]) prior to calling
+ ** was defined  (using [sqlite3_busy_handler()]) prior to calling
- ** this routine, that other busy handler is cleared.
+ ** this routine, that other busy handler is cleared.)^
- **
- ** INVARIANTS:
- **
- ** {F12341} The [sqlite3_busy_timeout()] function overrides any prior
- **          [sqlite3_busy_timeout()] or [sqlite3_busy_handler()] setting
- **          on the same database connection.
- **
- ** {F12343} If the 2nd parameter to [sqlite3_busy_timeout()] is less than
- **          or equal to zero, then the busy handler is cleared so that
- **          all subsequent locking events immediately return [SQLITE_BUSY].
- **
- ** {F12344} If the 2nd parameter to [sqlite3_busy_timeout()] is a positive
- **          number N, then a busy handler is set that repeatedly calls
- **          the xSleep() method in the VFS interface until either the
- **          lock clears or until the cumulative sleep time reported back
- **          by xSleep() exceeds N milliseconds.
  */
- int sqlite3_busy_timeout(sqlite3*, int ms);
+ SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms);
  /*
- ** CAPI3REF: Convenience Routines For Running Queries {F12370}
+ ** CAPI3REF: Convenience Routines For Running Queries
+ **
+ ** This is a legacy interface that is preserved for backwards compatibility.
+ ** Use of this interface is not recommended.
  **
  ** Definition: A <b>result table</b> is memory data structure created by the
  ** [sqlite3_get_table()] interface.  A result table records the
- Line 1224  int sqlite3_busy_timeout(sqlite3*, int m
+ Line 2079  int sqlite3_busy_timeout(sqlite3*, int m
  ** numbers are obtained separately.  Let N be the number of rows
  ** and M be the number of columns.
  **
- ** A result table is an array of pointers to zero-terminated
+ ** A result table is an array of pointers to zero-terminated UTF-8 strings.
- ** UTF-8 strings.  There are (N+1)*M elements in the array.
+ ** There are (N+1)*M elements in the array.  The first M pointers point
- ** The first M pointers point to zero-terminated strings that
+ ** to zero-terminated strings that  contain the names of the columns.
- ** contain the names of the columns.
+ ** The remaining entries all point to query results.  NULL values result
- ** The remaining entries all point to query results.  NULL
+ ** in NULL pointers.  All other values are in their UTF-8 zero-terminated
- ** values are give a NULL pointer.  All other values are in
+ ** string representation as returned by [sqlite3_column_text()].
- ** their UTF-8 zero-terminated string representation as returned by
- ** [sqlite3_column_text()].
  **
- ** A result table might consists of one or more memory allocations.
+ ** A result table might consist of one or more memory allocations.
  ** It is not safe to pass a result table directly to [sqlite3_free()].
  ** A result table should be deallocated using [sqlite3_free_table()].
  **
- ** As an example of the result table format, suppose a query result
+ ** ^(As an example of the result table format, suppose a query result
  ** is as follows:
  **
  ** <blockquote><pre>
- Line 1261  int sqlite3_busy_timeout(sqlite3*, int m
+ Line 2114  int sqlite3_busy_timeout(sqlite3*, int m
  **        azResult&#91;5] = "28";
  **        azResult&#91;6] = "Cindy";
  **        azResult&#91;7] = "21";
- ** </pre></blockquote>
+ ** </pre></blockquote>)^
  **
- ** The sqlite3_get_table() function evaluates one or more
+ ** ^The sqlite3_get_table() function evaluates one or more
  ** semicolon-separated SQL statements in the zero-terminated UTF-8
- ** string of its 2nd parameter.  It returns a result table to the
+ ** string of its 2nd parameter and returns a result table to the
  ** pointer given in its 3rd parameter.
  **
- ** After the calling function has finished using the result, it should
+ ** After the application has finished with the result from sqlite3_get_table(),
- ** pass the pointer to the result table to sqlite3_free_table() in order to
+ ** it must pass the result table pointer to sqlite3_free_table() in order to
- ** release the memory that was malloc-ed.  Because of the way the
+ ** release the memory that was malloced.  Because of the way the
  ** [sqlite3_malloc()] happens within sqlite3_get_table(), the calling
  ** function must not try to call [sqlite3_free()] directly.  Only
  ** [sqlite3_free_table()] is able to release the memory properly and safely.
  **
  ** The sqlite3_get_table() interface is implemented as a wrapper around
- Line 1282  int sqlite3_busy_timeout(sqlite3*, int m
+ Line 2135  int sqlite3_busy_timeout(sqlite3*, int m
  ** wrapper layer outside of the internal [sqlite3_exec()] call are not
  ** reflected in subsequent calls to [sqlite3_errcode()] or
  ** [sqlite3_errmsg()].
- **
+ */
- ** INVARIANTS:
+ SQLITE_API int sqlite3_get_table(
- **
+   sqlite3 *db,          /* An open database */
- ** {F12371} If a [sqlite3_get_table()] fails a memory allocation, then
+   const char *zSql,     /* SQL to be evaluated */
- **          it frees the result table under construction, aborts the
+   char ***pazResult,    /* Results of the query */
- **          query in process, skips any subsequent queries, sets the
+   int *pnRow,           /* Number of result rows written here */
- **          *resultp output pointer to NULL and returns [SQLITE_NOMEM].
+   int *pnColumn,        /* Number of result columns written here */
- **
+   char **pzErrmsg       /* Error msg written here */
- ** {F12373} If the ncolumn parameter to [sqlite3_get_table()] is not NULL
- **          then [sqlite3_get_table()] write the number of columns in the
- **          result set of the query into *ncolumn if the query is
- **          successful (if the function returns SQLITE_OK).
- **
- ** {F12374} If the nrow parameter to [sqlite3_get_table()] is not NULL
- **          then [sqlite3_get_table()] write the number of rows in the
- **          result set of the query into *nrow if the query is
- **          successful (if the function returns SQLITE_OK).
- **
- ** {F12376} The [sqlite3_get_table()] function sets its *ncolumn value
- **          to the number of columns in the result set of the query in the
- **          sql parameter, or to zero if the query in sql has an empty
- **          result set.
- */
- int sqlite3_get_table(
-   sqlite3*,             /* An open database */
-   const char *sql,      /* SQL to be evaluated */
-   char ***pResult,      /* Results of the query */
-   int *nrow,            /* Number of result rows written here */
-   int *ncolumn,         /* Number of result columns written here */
-   char **errmsg         /* Error msg written here */
  );
- void sqlite3_free_table(char **result);
+ SQLITE_API void sqlite3_free_table(char **result);
  /*
- ** CAPI3REF: Formatted String Printing Functions {F17400}
+ ** CAPI3REF: Formatted String Printing Functions
  **
- ** These routines are workalikes of the "printf()" family of functions
+ ** These routines are work-alikes of the "printf()" family of functions
  ** from the standard C library.
  **
- ** The sqlite3_mprintf() and sqlite3_vmprintf() routines write their
+ ** ^The sqlite3_mprintf() and sqlite3_vmprintf() routines write their
  ** results into memory obtained from [sqlite3_malloc()].
  ** The strings returned by these two routines should be
- ** released by [sqlite3_free()].   Both routines return a
+ ** released by [sqlite3_free()].  ^Both routines return a
  ** NULL pointer if [sqlite3_malloc()] is unable to allocate enough
  ** memory to hold the resulting string.
  **
- ** In sqlite3_snprintf() routine is similar to "snprintf()" from
+ ** ^(The sqlite3_snprintf() routine is similar to "snprintf()" from
  ** the standard C library.  The result is written into the
  ** buffer supplied as the second parameter whose size is given by
  ** the first parameter. Note that the order of the
- ** first two parameters is reversed from snprintf().  This is an
+ ** first two parameters is reversed from snprintf().)^  This is an
  ** historical accident that cannot be fixed without breaking
- ** backwards compatibility.  Note also that sqlite3_snprintf()
+ ** backwards compatibility.  ^(Note also that sqlite3_snprintf()
  ** returns a pointer to its buffer instead of the number of
- ** characters actually written into the buffer.  We admit that
+ ** characters actually written into the buffer.)^  We admit that
  ** the number of characters written would be a more useful return
  ** value but we cannot change the implementation of sqlite3_snprintf()
  ** now without breaking compatibility.
  **
- ** As long as the buffer size is greater than zero, sqlite3_snprintf()
+ ** ^As long as the buffer size is greater than zero, sqlite3_snprintf()
- ** guarantees that the buffer is always zero-terminated.  The first
+ ** guarantees that the buffer is always zero-terminated.  ^The first
  ** parameter "n" is the total size of the buffer, including space for
  ** the zero terminator.  So the longest string that can be completely
  ** written will be n-1 characters.
  **
+ ** ^The sqlite3_vsnprintf() routine is a varargs version of sqlite3_snprintf().
+ **
  ** These routines all implement some additional formatting
  ** options that are useful for constructing SQL statements.
- ** All of the usual printf formatting options apply.  In addition, there
+ ** All of the usual printf() formatting options apply.  In addition, there
  ** is are "%q", "%Q", and "%z" options.
  **
- ** The %q option works like %s in that it substitutes a null-terminated
+ ** ^(The %q option works like %s in that it substitutes a nul-terminated
  ** string from the argument list.  But %q also doubles every '\'' character.
- ** %q is designed for use inside a string literal.  By doubling each '\''
+ ** %q is designed for use inside a string literal.)^  By doubling each '\''
  ** character it escapes that character and allows it to be inserted into
  ** the string.
  **
- ** For example, so some string variable contains text as follows:
+ ** For example, assume the string variable zText contains text as follows:
  **
  ** <blockquote><pre>
  **  char *zText = "It's a happy day!";
- Line 1386  void sqlite3_free_table(char **result);
+ Line 2219  void sqlite3_free_table(char **result);
  **  INSERT INTO table1 VALUES('It's a happy day!');
  ** </pre></blockquote>
  **
- ** This second example is an SQL syntax error.  As a general rule you
+ ** This second example is an SQL syntax error.  As a general rule you should
- ** should always use %q instead of %s when inserting text into a string
+ ** always use %q instead of %s when inserting text into a string literal.
- ** literal.
+ **
- **
+ ** ^(The %Q option works like %q except it also adds single quotes around
- ** The %Q option works like %q except it also adds single quotes around
+ ** the outside of the total string.  Additionally, if the parameter in the
- ** the outside of the total string.  Or if the parameter in the argument
+ ** argument list is a NULL pointer, %Q substitutes the text "NULL" (without
- ** list is a NULL pointer, %Q substitutes the text "NULL" (without single
+ ** single quotes).)^  So, for example, one could say:
- ** quotes) in place of the %Q option. {END}  So, for example, one could say:
  **
  ** <blockquote><pre>
  **  char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES(%Q)", zText);
- Line 1404  void sqlite3_free_table(char **result);
+ Line 2236  void sqlite3_free_table(char **result);
  ** The code above will render a correct SQL statement in the zSQL
  ** variable even if the zText variable is a NULL pointer.
  **
- ** The "%z" formatting option works exactly like "%s" with the
+ ** ^(The "%z" formatting option works like "%s" but with the
  ** addition that after the string has been read and copied into
- ** the result, [sqlite3_free()] is called on the input string. {END}
+ ** the result, [sqlite3_free()] is called on the input string.)^
- **
- ** INVARIANTS:
- **
- ** {F17403}  The [sqlite3_mprintf()] and [sqlite3_vmprintf()] interfaces
- **           return either pointers to zero-terminated UTF-8 strings held in
- **           memory obtained from [sqlite3_malloc()] or NULL pointers if
- **           a call to [sqlite3_malloc()] fails.
- **
- ** {F17406}  The [sqlite3_snprintf()] interface writes a zero-terminated
- **           UTF-8 string into the buffer pointed to by the second parameter
- **           provided that the first parameter is greater than zero.
- **
- ** {F17407}  The [sqlite3_snprintf()] interface does not writes slots of
- **           its output buffer (the second parameter) outside the range
- **           of 0 through N-1 (where N is the first parameter)
- **           regardless of the length of the string
- **           requested by the format specification.
- **
  */
- char *sqlite3_mprintf(const char*,...);
+ SQLITE_API char *sqlite3_mprintf(const char*,...);
- char *sqlite3_vmprintf(const char*, va_list);
+ SQLITE_API char *sqlite3_vmprintf(const char*, va_list);
- char *sqlite3_snprintf(int,char*,const char*, ...);
+ SQLITE_API char *sqlite3_snprintf(int,char*,const char*, ...);
+ SQLITE_API char *sqlite3_vsnprintf(int,char*,const char*, va_list);
  /*
- ** CAPI3REF: Memory Allocation Subsystem {F17300}
+ ** CAPI3REF: Memory Allocation Subsystem
  **
- ** The SQLite core  uses these three routines for all of its own
+ ** The SQLite core uses these three routines for all of its own
  ** internal memory allocation needs. "Core" in the previous sentence
  ** does not include operating-system specific VFS implementation.  The
- ** windows VFS uses native malloc and free for some operations.
+ ** Windows VFS uses native malloc() and free() for some operations.
  **
- ** The sqlite3_malloc() routine returns a pointer to a block
+ ** ^The sqlite3_malloc() routine returns a pointer to a block
  ** of memory at least N bytes in length, where N is the parameter.
- ** If sqlite3_malloc() is unable to obtain sufficient free
+ ** ^If sqlite3_malloc() is unable to obtain sufficient free
- ** memory, it returns a NULL pointer.  If the parameter N to
+ ** memory, it returns a NULL pointer.  ^If the parameter N to
  ** sqlite3_malloc() is zero or negative then sqlite3_malloc() returns
  ** a NULL pointer.
  **
- ** Calling sqlite3_free() with a pointer previously returned
+ ** ^Calling sqlite3_free() with a pointer previously returned
  ** by sqlite3_malloc() or sqlite3_realloc() releases that memory so
- ** that it might be reused.  The sqlite3_free() routine is
+ ** that it might be reused.  ^The sqlite3_free() routine is
  ** a no-op if is called with a NULL pointer.  Passing a NULL pointer
  ** to sqlite3_free() is harmless.  After being freed, memory
  ** should neither be read nor written.  Even reading previously freed
  ** memory might result in a segmentation fault or other severe error.
  ** Memory corruption, a segmentation fault, or other severe error
  ** might result if sqlite3_free() is called with a non-NULL pointer that
- ** was not obtained from sqlite3_malloc() or sqlite3_free().
+ ** was not obtained from sqlite3_malloc() or sqlite3_realloc().
  **
- ** The sqlite3_realloc() interface attempts to resize a
+ ** ^(The sqlite3_realloc() interface attempts to resize a
  ** prior memory allocation to be at least N bytes, where N is the
  ** second parameter.  The memory allocation to be resized is the first
- ** parameter.  If the first parameter to sqlite3_realloc()
+ ** parameter.)^ ^ If the first parameter to sqlite3_realloc()
  ** is a NULL pointer then its behavior is identical to calling
  ** sqlite3_malloc(N) where N is the second parameter to sqlite3_realloc().
- ** If the second parameter to sqlite3_realloc() is zero or
+ ** ^If the second parameter to sqlite3_realloc() is zero or
  ** negative then the behavior is exactly the same as calling
  ** sqlite3_free(P) where P is the first parameter to sqlite3_realloc().
- ** Sqlite3_realloc() returns a pointer to a memory allocation
+ ** ^sqlite3_realloc() returns a pointer to a memory allocation
  ** of at least N bytes in size or NULL if sufficient memory is unavailable.
- ** If M is the size of the prior allocation, then min(N,M) bytes
+ ** ^If M is the size of the prior allocation, then min(N,M) bytes
  ** of the prior allocation are copied into the beginning of buffer returned
  ** by sqlite3_realloc() and the prior allocation is freed.
- ** If sqlite3_realloc() returns NULL, then the prior allocation
+ ** ^If sqlite3_realloc() returns NULL, then the prior allocation
  ** is not freed.
  **
- ** The memory returned by sqlite3_malloc() and sqlite3_realloc()
+ ** ^The memory returned by sqlite3_malloc() and sqlite3_realloc()
- ** is always aligned to at least an 8 byte boundary. {END}
+ ** is always aligned to at least an 8 byte boundary, or to a
- **
+ ** 4 byte boundary if the [SQLITE_4_BYTE_ALIGNED_MALLOC] compile-time
- ** The default implementation
+ ** option is used.
- ** of the memory allocation subsystem uses the malloc(), realloc()
- ** and free() provided by the standard C library. {F17382} However, if
- ** SQLite is compiled with the following C preprocessor macro
- **
- ** <blockquote> SQLITE_MEMORY_SIZE=<i>NNN</i> </blockquote>
- **
- ** where <i>NNN</i> is an integer, then SQLite create a static
- ** array of at least <i>NNN</i> bytes in size and use that array
- ** for all of its dynamic memory allocation needs. {END}  Additional
- ** memory allocator options may be added in future releases.
  **
  ** In SQLite version 3.5.0 and 3.5.1, it was possible to define
  ** the SQLITE_OMIT_MEMORY_ALLOCATION which would cause the built-in
  ** implementation of these routines to be omitted.  That capability
- ** is no longer provided.  Only built-in memory allocators can be
+ ** is no longer provided.  Only built-in memory allocators can be used.
- ** used.
  **
- ** The windows OS interface layer calls
+ ** Prior to SQLite version 3.7.10, the Windows OS interface layer called
  ** the system malloc() and free() directly when converting
  ** filenames between the UTF-8 encoding used by SQLite
- ** and whatever filename encoding is used by the particular windows
+ ** and whatever filename encoding is used by the particular Windows
- ** installation.  Memory allocation errors are detected, but
+ ** installation.  Memory allocation errors were detected, but
- ** they are reported back as [SQLITE_CANTOPEN] or
+ ** they were reported back as [SQLITE_CANTOPEN] or
  ** [SQLITE_IOERR] rather than [SQLITE_NOMEM].
  **
- ** INVARIANTS:
+ ** The pointer arguments to [sqlite3_free()] and [sqlite3_realloc()]
- **
+ ** must be either NULL or else pointers obtained from a prior
- ** {F17303}  The [sqlite3_malloc(N)] interface returns either a pointer to
+ ** invocation of [sqlite3_malloc()] or [sqlite3_realloc()] that have
- **           newly checked-out block of at least N bytes of memory
+ ** not yet been released.
- **           that is 8-byte aligned,
- **           or it returns NULL if it is unable to fulfill the request.
- **
- ** {F17304}  The [sqlite3_malloc(N)] interface returns a NULL pointer if
- **           N is less than or equal to zero.
- **
- ** {F17305}  The [sqlite3_free(P)] interface releases memory previously
- **           returned from [sqlite3_malloc()] or [sqlite3_realloc()],
- **           making it available for reuse.
- **
- ** {F17306}  A call to [sqlite3_free(NULL)] is a harmless no-op.
- **
- ** {F17310}  A call to [sqlite3_realloc(0,N)] is equivalent to a call
- **           to [sqlite3_malloc(N)].
- **
- ** {F17312}  A call to [sqlite3_realloc(P,0)] is equivalent to a call
- **           to [sqlite3_free(P)].
- **
- ** {F17315}  The SQLite core uses [sqlite3_malloc()], [sqlite3_realloc()],
- **           and [sqlite3_free()] for all of its memory allocation and
- **           deallocation needs.
- **
- ** {F17318}  The [sqlite3_realloc(P,N)] interface returns either a pointer
- **           to a block of checked-out memory of at least N bytes in size
- **           that is 8-byte aligned, or a NULL pointer.
- **
- ** {F17321}  When [sqlite3_realloc(P,N)] returns a non-NULL pointer, it first
- **           copies the first K bytes of content from P into the newly allocated
- **           where K is the lessor of N and the size of the buffer P.
  **
- ** {F17322}  When [sqlite3_realloc(P,N)] returns a non-NULL pointer, it first
+ ** The application must not read or write any part of
- **           releases the buffer P.
+ ** a block of memory after it has been released using
- **
+ ** [sqlite3_free()] or [sqlite3_realloc()].
- ** {F17323}  When [sqlite3_realloc(P,N)] returns NULL, the buffer P is
+ */
- **           not modified or released.
+ SQLITE_API void *sqlite3_malloc(int);
- **
+ SQLITE_API void *sqlite3_realloc(void*, int);
- ** LIMITATIONS:
+ SQLITE_API void sqlite3_free(void*);
+ /*
+ ** CAPI3REF: Memory Allocator Statistics
  **
- ** {U17350}  The pointer arguments to [sqlite3_free()] and [sqlite3_realloc()]
+ ** SQLite provides these two interfaces for reporting on the status
- **           must be either NULL or else a pointer obtained from a prior
+ ** of the [sqlite3_malloc()], [sqlite3_free()], and [sqlite3_realloc()]
- **           invocation of [sqlite3_malloc()] or [sqlite3_realloc()] that has
+ ** routines, which form the built-in memory allocation subsystem.
- **           not been released.
  **
- ** {U17351}  The application must not read or write any part of
+ ** ^The [sqlite3_memory_used()] routine returns the number of bytes
- **           a block of memory after it has been released using
+ ** of memory currently outstanding (malloced but not freed).
- **           [sqlite3_free()] or [sqlite3_realloc()].
+ ** ^The [sqlite3_memory_highwater()] routine returns the maximum
+ ** value of [sqlite3_memory_used()] since the high-water mark
+ ** was last reset.  ^The values returned by [sqlite3_memory_used()] and
+ ** [sqlite3_memory_highwater()] include any overhead
+ ** added by SQLite in its implementation of [sqlite3_malloc()],
+ ** but not overhead added by the any underlying system library
+ ** routines that [sqlite3_malloc()] may call.
  **
+ ** ^The memory high-water mark is reset to the current value of
+ ** [sqlite3_memory_used()] if and only if the parameter to
+ ** [sqlite3_memory_highwater()] is true.  ^The value returned
+ ** by [sqlite3_memory_highwater(1)] is the high-water mark
+ ** prior to the reset.
  */
- void *sqlite3_malloc(int);
+ SQLITE_API sqlite3_int64 sqlite3_memory_used(void);
- void *sqlite3_realloc(void*, int);
+ SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int resetFlag);
- void sqlite3_free(void*);
  /*
- ** CAPI3REF: Memory Allocator Statistics {F17370}
+ ** CAPI3REF: Pseudo-Random Number Generator
  **
- ** SQLite provides these two interfaces for reporting on the status
+ ** SQLite contains a high-quality pseudo-random number generator (PRNG) used to
- ** of the [sqlite3_malloc()], [sqlite3_free()], and [sqlite3_realloc()]
+ ** select random [ROWID | ROWIDs] when inserting new records into a table that
- ** the memory allocation subsystem included within the SQLite.
+ ** already uses the largest possible [ROWID].  The PRNG is also used for
+ ** the build-in random() and randomblob() SQL functions.  This interface allows
+ ** applications to access the same PRNG for other purposes.
  **
- ** INVARIANTS:
+ ** ^A call to this routine stores N bytes of randomness into buffer P.
  **
- ** {F17371} The [sqlite3_memory_used()] routine returns the
+ ** ^The first time this routine is invoked (either internally or by
- **          number of bytes of memory currently outstanding
+ ** the application) the PRNG is seeded using randomness obtained
- **          (malloced but not freed).
+ ** from the xRandomness method of the default [sqlite3_vfs] object.
- **
+ ** ^On all subsequent invocations, the pseudo-randomness is generated
- ** {F17373} The [sqlite3_memory_highwater()] routine returns the maximum
+ ** internally and without recourse to the [sqlite3_vfs] xRandomness
- **          value of [sqlite3_memory_used()]
+ ** method.
- **          since the highwater mark was last reset.
- **
- ** {F17374} The values returned by [sqlite3_memory_used()] and
- **          [sqlite3_memory_highwater()] include any overhead
- **          added by SQLite in its implementation of [sqlite3_malloc()],
- **          but not overhead added by the any underlying system library
- **          routines that [sqlite3_malloc()] may call.
- **
- ** {F17375} The memory highwater mark is reset to the current value of
- **          [sqlite3_memory_used()] if and only if the parameter to
- **          [sqlite3_memory_highwater()] is true.  The value returned
- **          by [sqlite3_memory_highwater(1)] is the highwater mark
- **          prior to the reset.
  */
- sqlite3_int64 sqlite3_memory_used(void);
+ SQLITE_API void sqlite3_randomness(int N, void *P);
- sqlite3_int64 sqlite3_memory_highwater(int resetFlag);
  /*
- ** CAPI3REF: Compile-Time Authorization Callbacks {F12500}
+ ** CAPI3REF: Compile-Time Authorization Callbacks
  **
- ** This routine registers a authorizer callback with a particular
+ ** ^This routine registers an authorizer callback with a particular
- ** database connection, supplied in the first argument.
+ ** [database connection], supplied in the first argument.
- ** The authorizer callback is invoked as SQL statements are being compiled
+ ** ^The authorizer callback is invoked as SQL statements are being compiled
  ** by [sqlite3_prepare()] or its variants [sqlite3_prepare_v2()],
- ** [sqlite3_prepare16()] and [sqlite3_prepare16_v2()].  At various
+ ** [sqlite3_prepare16()] and [sqlite3_prepare16_v2()].  ^At various
  ** points during the compilation process, as logic is being created
  ** to perform various actions, the authorizer callback is invoked to
- ** see if those actions are allowed.  The authorizer callback should
+ ** see if those actions are allowed.  ^The authorizer callback should
- ** return SQLITE_OK to allow the action, [SQLITE_IGNORE] to disallow the
+ ** return [SQLITE_OK] to allow the action, [SQLITE_IGNORE] to disallow the
  ** specific action but allow the SQL statement to continue to be
  ** compiled, or [SQLITE_DENY] to cause the entire SQL statement to be
- ** rejected with an error.   If the authorizer callback returns
+ ** rejected with an error.  ^If the authorizer callback returns
  ** any value other than [SQLITE_IGNORE], [SQLITE_OK], or [SQLITE_DENY]
- ** then [sqlite3_prepare_v2()] or equivalent call that triggered
+ ** then the [sqlite3_prepare_v2()] or equivalent call that triggered
  ** the authorizer will fail with an error message.
  **
  ** When the callback returns [SQLITE_OK], that means the operation
- ** requested is ok.  When the callback returns [SQLITE_DENY], the
+ ** requested is ok.  ^When the callback returns [SQLITE_DENY], the
  ** [sqlite3_prepare_v2()] or equivalent call that triggered the
  ** authorizer will fail with an error message explaining that
- ** access is denied.  If the authorizer code is [SQLITE_READ]
+ ** access is denied.
- ** and the callback returns [SQLITE_IGNORE] then the prepared
+ **
- ** statement is constructed to insert a NULL value in place of
+ ** ^The first parameter to the authorizer callback is a copy of the third
- ** the table column that would have
+ ** parameter to the sqlite3_set_authorizer() interface. ^The second parameter
+ ** to the callback is an integer [SQLITE_COPY | action code] that specifies
+ ** the particular action to be authorized. ^The third through sixth parameters
+ ** to the callback are zero-terminated strings that contain additional
+ ** details about the action to be authorized.
+ **
+ ** ^If the action code is [SQLITE_READ]
+ ** and the callback returns [SQLITE_IGNORE] then the
+ ** [prepared statement] statement is constructed to substitute
+ ** a NULL value in place of the table column that would have
  ** been read if [SQLITE_OK] had been returned.  The [SQLITE_IGNORE]
  ** return can be used to deny an untrusted user access to individual
  ** columns of a table.
- **
+ ** ^If the action code is [SQLITE_DELETE] and the callback returns
- ** The first parameter to the authorizer callback is a copy of
+ ** [SQLITE_IGNORE] then the [DELETE] operation proceeds but the
- ** the third parameter to the sqlite3_set_authorizer() interface.
+ ** [truncate optimization] is disabled and all rows are deleted individually.
- ** The second parameter to the callback is an integer
+ **
- ** [SQLITE_COPY | action code] that specifies the particular action
+ ** An authorizer is used when [sqlite3_prepare | preparing]
- ** to be authorized. The third through sixth
+ ** SQL statements from an untrusted source, to ensure that the SQL statements
- ** parameters to the callback are zero-terminated strings that contain
+ ** do not try to access data they are not allowed to see, or that they do not
- ** additional details about the action to be authorized.
+ ** try to execute malicious statements that damage the database.  For
- **
- ** An authorizer is used when preparing SQL statements from an untrusted
- ** source, to ensure that the SQL statements do not try to access data
- ** that they are not allowed to see, or that they do not try to
- ** execute malicious statements that damage the database.  For
  ** example, an application may allow a user to enter arbitrary
  ** SQL queries for evaluation by a database.  But the application does
  ** not want the user to be able to make arbitrary changes to the
  ** database.  An authorizer could then be put in place while the
- ** user-entered SQL is being prepared that disallows everything
+ ** user-entered SQL is being [sqlite3_prepare | prepared] that
- ** except SELECT statements.
+ ** disallows everything except [SELECT] statements.
  **
- ** Only a single authorizer can be in place on a database connection
+ ** Applications that need to process SQL from untrusted sources
+ ** might also consider lowering resource limits using [sqlite3_limit()]
+ ** and limiting database size using the [max_page_count] [PRAGMA]
+ ** in addition to using an authorizer.
+ **
+ ** ^(Only a single authorizer can be in place on a database connection
  ** at a time.  Each call to sqlite3_set_authorizer overrides the
- ** previous call.  Disable the authorizer by installing a NULL callback.
+ ** previous call.)^  ^Disable the authorizer by installing a NULL callback.
  ** The authorizer is disabled by default.
  **
- ** Note that the authorizer callback is invoked only during
+ ** The authorizer callback must not do anything that will modify
- ** [sqlite3_prepare()] or its variants.  Authorization is not
+ ** the database connection that invoked the authorizer callback.
- ** performed during statement evaluation in [sqlite3_step()].
+ ** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
- **
+ ** database connections for the meaning of "modify" in this paragraph.
- ** INVARIANTS:
+ **
- **
+ ** ^When [sqlite3_prepare_v2()] is used to prepare a statement, the
- ** {F12501} The [sqlite3_set_authorizer(D,...)] interface registers a
+ ** statement might be re-prepared during [sqlite3_step()] due to a
- **          authorizer callback with database connection D.
+ ** schema change.  Hence, the application should ensure that the
- **
+ ** correct authorizer callback remains in place during the [sqlite3_step()].
- ** {F12502} The authorizer callback is invoked as SQL statements are
- **          being compiled
- **
- ** {F12503} If the authorizer callback returns any value other than
- **          [SQLITE_IGNORE], [SQLITE_OK], or [SQLITE_DENY] then
- **          the [sqlite3_prepare_v2()] or equivalent call that caused
- **          the authorizer callback to run shall fail with an
- **          [SQLITE_ERROR] error code and an appropriate error message.
  **
- ** {F12504} When the authorizer callback returns [SQLITE_OK], the operation
+ ** ^Note that the authorizer callback is invoked only during
- **          described is coded normally.
+ ** [sqlite3_prepare()] or its variants.  Authorization is not
- **
+ ** performed during statement evaluation in [sqlite3_step()], unless
- ** {F12505} When the authorizer callback returns [SQLITE_DENY], the
+ ** as stated in the previous paragraph, sqlite3_step() invokes
- **          [sqlite3_prepare_v2()] or equivalent call that caused the
+ ** sqlite3_prepare_v2() to reprepare a statement after a schema change.
- **          authorizer callback to run shall fail
- **          with an [SQLITE_ERROR] error code and an error message
- **          explaining that access is denied.
- **
- ** {F12506} If the authorizer code (the 2nd parameter to the authorizer
- **          callback) is [SQLITE_READ] and the authorizer callback returns
- **          [SQLITE_IGNORE] then the prepared statement is constructed to
- **          insert a NULL value in place of the table column that would have
- **          been read if [SQLITE_OK] had been returned.
- **
- ** {F12507} If the authorizer code (the 2nd parameter to the authorizer
- **          callback) is anything other than [SQLITE_READ], then
- **          a return of [SQLITE_IGNORE] has the same effect as [SQLITE_DENY].
- **
- ** {F12510} The first parameter to the authorizer callback is a copy of
- **          the third parameter to the [sqlite3_set_authorizer()] interface.
- **
- ** {F12511} The second parameter to the callback is an integer
- **          [SQLITE_COPY | action code] that specifies the particular action
- **          to be authorized.
- **
- ** {F12512} The third through sixth parameters to the callback are
- **          zero-terminated strings that contain
- **          additional details about the action to be authorized.
- **
- ** {F12520} Each call to [sqlite3_set_authorizer()] overrides the
- **          any previously installed authorizer.
- **
- ** {F12521} A NULL authorizer means that no authorization
- **          callback is invoked.
- **
- ** {F12522} The default authorizer is NULL.
  */
- int sqlite3_set_authorizer(
+ SQLITE_API int sqlite3_set_authorizer(
    sqlite3*,
    int (*xAuth)(void*,int,const char*,const char*,const char*,const char*),
    void *pUserData
  );
  /*
- ** CAPI3REF: Authorizer Return Codes {F12590}
+ ** CAPI3REF: Authorizer Return Codes
  **
  ** The [sqlite3_set_authorizer | authorizer callback function] must
  ** return either [SQLITE_OK] or one of these two constants in order
  ** to signal SQLite whether or not the action is permitted.  See the
  ** [sqlite3_set_authorizer | authorizer documentation] for additional
  ** information.
+ **
+ ** Note that SQLITE_IGNORE is also used as a [SQLITE_ROLLBACK | return code]
+ ** from the [sqlite3_vtab_on_conflict()] interface.
  */
  #define SQLITE_DENY   1   /* Abort the SQL statement with an error */
  #define SQLITE_IGNORE 2   /* Don't allow access, but don't generate an error */
  /*
- ** CAPI3REF: Authorizer Action Codes {F12550}
+ ** CAPI3REF: Authorizer Action Codes
  **
  ** The [sqlite3_set_authorizer()] interface registers a callback function
- ** that is invoked to authorizer certain SQL statement actions.  The
+ ** that is invoked to authorize certain SQL statement actions.  The
  ** second parameter to the callback is an integer code that specifies
  ** what action is being authorized.  These are the integer action codes that
  ** the authorizer callback may be passed.
  **
  ** These action code values signify what kind of operation is to be
  ** authorized.  The 3rd and 4th parameters to the authorization
  ** callback function will be parameters or NULL depending on which of these
- ** codes is used as the second parameter.  The 5th parameter to the
+ ** codes is used as the second parameter.  ^(The 5th parameter to the
  ** authorizer callback is the name of the database ("main", "temp",
- ** etc.) if applicable.  The 6th parameter to the authorizer callback
+ ** etc.) if applicable.)^  ^The 6th parameter to the authorizer callback
  ** is the name of the inner-most trigger or view that is responsible for
  ** the access attempt or NULL if this access attempt is directly from
  ** top-level SQL code.
- **
- ** INVARIANTS:
- **
- ** {F12551} The second parameter to an
- **          [sqlite3_set_authorizer | authorizer callback is always an integer
- **          [SQLITE_COPY | authorizer code] that specifies what action
- **          is being authorized.
- **
- ** {F12552} The 3rd and 4th parameters to the
- **          [sqlite3_set_authorizer | authorization callback function]
- **          will be parameters or NULL depending on which
- **          [SQLITE_COPY | authorizer code] is used as the second parameter.
- **
- ** {F12553} The 5th parameter to the
- **          [sqlite3_set_authorizer | authorizer callback] is the name
- **          of the database (example: "main", "temp", etc.) if applicable.
- **
- ** {F12554} The 6th parameter to the
- **          [sqlite3_set_authorizer | authorizer callback] is the name
- **          of the inner-most trigger or view that is responsible for
- **          the access attempt or NULL if this access attempt is directly from
- **          top-level SQL code.
  */
  /******************************************* 3rd ************ 4th ***********/
  #define SQLITE_CREATE_INDEX          1   /* Index Name      Table Name      */
- Line 1782  int sqlite3_set_authorizer(
+ Line 2507  int sqlite3_set_authorizer(
  #define SQLITE_PRAGMA               19   /* Pragma Name     1st arg or NULL */
  #define SQLITE_READ                 20   /* Table Name      Column Name     */
  #define SQLITE_SELECT               21   /* NULL            NULL            */
- #define SQLITE_TRANSACTION          22   /* NULL            NULL            */
+ #define SQLITE_TRANSACTION          22   /* Operation       NULL            */
  #define SQLITE_UPDATE               23   /* Table Name      Column Name     */
  #define SQLITE_ATTACH               24   /* Filename        NULL            */
  #define SQLITE_DETACH               25   /* Database Name   NULL            */
- Line 1791  int sqlite3_set_authorizer(
+ Line 2516  int sqlite3_set_authorizer(
  #define SQLITE_ANALYZE              28   /* Table Name      NULL            */
  #define SQLITE_CREATE_VTABLE        29   /* Table Name      Module Name     */
  #define SQLITE_DROP_VTABLE          30   /* Table Name      Module Name     */
- #define SQLITE_FUNCTION             31   /* Function Name   NULL            */
+ #define SQLITE_FUNCTION             31   /* NULL            Function Name   */
+ #define SQLITE_SAVEPOINT            32   /* Operation       Savepoint Name  */
  #define SQLITE_COPY                  0   /* No longer used */
  /*
- ** CAPI3REF: Tracing And Profiling Functions {F12280}
+ ** CAPI3REF: Tracing And Profiling Functions
  **
  ** These routines register callback functions that can be used for
  ** tracing and profiling the execution of SQL statements.
  **
- ** The callback function registered by sqlite3_trace() is invoked at
+ ** ^The callback function registered by sqlite3_trace() is invoked at
  ** various times when an SQL statement is being run by [sqlite3_step()].
- ** The callback returns a UTF-8 rendering of the SQL statement text
+ ** ^The sqlite3_trace() callback is invoked with a UTF-8 rendering of the
- ** as the statement first begins executing.  Additional callbacks occur
+ ** SQL statement text as the statement first begins executing.
- ** as each triggersubprogram is entered.  The callbacks for triggers
+ ** ^(Additional sqlite3_trace() callbacks might occur
- ** contain a UTF-8 SQL comment that identifies the trigger.
+ ** as each triggered subprogram is entered.  The callbacks for triggers
- **
+ ** contain a UTF-8 SQL comment that identifies the trigger.)^
- ** The callback function registered by sqlite3_profile() is invoked
- ** as each SQL statement finishes.  The profile callback contains
- ** the original statement text and an estimate of wall-clock time
- ** of how long that statement took to run.
- **
- ** The sqlite3_profile() API is currently considered experimental and
- ** is subject to change or removal in a future release.
- **
- ** The trigger reporting feature of the trace callback is considered
- ** experimental and is subject to change or removal in future releases.
- ** Future versions of SQLite might also add new trace callback
- ** invocations.
  **
- ** INVARIANTS:
+ ** The [SQLITE_TRACE_SIZE_LIMIT] compile-time option can be used to limit
+ ** the length of [bound parameter] expansion in the output of sqlite3_trace().
  **
- ** {F12281} The callback function registered by [sqlite3_trace()] is
+ ** ^The callback function registered by sqlite3_profile() is invoked
- **          whenever an SQL statement first begins to execute and
+ ** as each SQL statement finishes.  ^The profile callback contains
- **          whenever a trigger subprogram first begins to run.
+ ** the original statement text and an estimate of wall-clock time
- **
+ ** of how long that statement took to run.  ^The profile callback
- ** {F12282} Each call to [sqlite3_trace()] overrides the previously
+ ** time is in units of nanoseconds, however the current implementation
- **          registered trace callback.
+ ** is only capable of millisecond resolution so the six least significant
- **
+ ** digits in the time are meaningless.  Future versions of SQLite
- ** {F12283} A NULL trace callback disables tracing.
+ ** might provide greater resolution on the profiler callback.  The
- **
+ ** sqlite3_profile() function is considered experimental and is
- ** {F12284} The first argument to the trace callback is a copy of
+ ** subject to change in future versions of SQLite.
- **          the pointer which was the 3rd argument to [sqlite3_trace()].
- **
- ** {F12285} The second argument to the trace callback is a
- **          zero-terminated UTF8 string containing the original text
- **          of the SQL statement as it was passed into [sqlite3_prepare_v2()]
- **          or the equivalent, or an SQL comment indicating the beginning
- **          of a trigger subprogram.
- **
- ** {F12287} The callback function registered by [sqlite3_profile()] is invoked
- **          as each SQL statement finishes.
- **
- ** {F12288} The first parameter to the profile callback is a copy of
- **          the 3rd parameter to [sqlite3_profile()].
- **
- ** {F12289} The second parameter to the profile callback is a
- **          zero-terminated UTF-8 string that contains the complete text of
- **          the SQL statement as it was processed by [sqlite3_prepare_v2()]
- **          or the equivalent.
- **
- ** {F12290} The third parameter to the profile  callback is an estimate
- **          of the number of nanoseconds of wall-clock time required to
- **          run the SQL statement from start to finish.
  */
- void *sqlite3_trace(sqlite3*, void(*xTrace)(void*,const char*), void*);
+ SQLITE_API void *sqlite3_trace(sqlite3*, void(*xTrace)(void*,const char*), void*);
- void *sqlite3_profile(sqlite3*,
+ SQLITE_API SQLITE_EXPERIMENTAL void *sqlite3_profile(sqlite3*,
     void(*xProfile)(void*,const char*,sqlite3_uint64), void*);
  /*
- ** CAPI3REF: Query Progress Callbacks {F12910}
+ ** CAPI3REF: Query Progress Callbacks
  **
- ** This routine configures a callback function - the
+ ** ^The sqlite3_progress_handler(D,N,X,P) interface causes the callback
- ** progress callback - that is invoked periodically during long
+ ** function X to be invoked periodically during long running calls to
- ** running calls to [sqlite3_exec()], [sqlite3_step()] and
+ ** [sqlite3_exec()], [sqlite3_step()] and [sqlite3_get_table()] for
- ** [sqlite3_get_table()].   An example use for this
+ ** database connection D.  An example use for this
  ** interface is to keep a GUI updated during a large query.
  **
- ** If the progress callback returns non-zero, the opertion is
+ ** ^The parameter P is passed through as the only parameter to the
- ** interrupted.  This feature can be used to implement a
+ ** callback function X.  ^The parameter N is the approximate number of
- ** "Cancel" button on a GUI dialog box.
+ ** [virtual machine instructions] that are evaluated between successive
+ ** invocations of the callback X.  ^If N is less than one then the progress
+ ** handler is disabled.
+ **
+ ** ^Only a single progress handler may be defined at one time per
+ ** [database connection]; setting a new progress handler cancels the
+ ** old one.  ^Setting parameter X to NULL disables the progress handler.
+ ** ^The progress handler is also disabled by setting N to a value less
+ ** than 1.
  **
- ** INVARIANTS:
+ ** ^If the progress callback returns non-zero, the operation is
+ ** interrupted.  This feature can be used to implement a
+ ** "Cancel" button on a GUI progress dialog box.
  **
- ** {F12911} The callback function registered by [sqlite3_progress_handler()]
+ ** The progress handler callback must not do anything that will modify
- **          is invoked periodically during long running calls to
+ ** the database connection that invoked the progress handler.
- **          [sqlite3_step()].
+ ** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
+ ** database connections for the meaning of "modify" in this paragraph.
+ **
+ */
+ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
+ /*
+ ** CAPI3REF: Opening A New Database Connection
+ **
+ ** ^These routines open an SQLite database file as specified by the
+ ** filename argument. ^The filename argument is interpreted as UTF-8 for
+ ** sqlite3_open() and sqlite3_open_v2() and as UTF-16 in the native byte
+ ** order for sqlite3_open16(). ^(A [database connection] handle is usually
+ ** returned in *ppDb, even if an error occurs.  The only exception is that
+ ** if SQLite is unable to allocate memory to hold the [sqlite3] object,
+ ** a NULL will be written into *ppDb instead of a pointer to the [sqlite3]
+ ** object.)^ ^(If the database is opened (and/or created) successfully, then
+ ** [SQLITE_OK] is returned.  Otherwise an [error code] is returned.)^ ^The
+ ** [sqlite3_errmsg()] or [sqlite3_errmsg16()] routines can be used to obtain
+ ** an English language description of the error following a failure of any
+ ** of the sqlite3_open() routines.
+ **
+ ** ^The default encoding for the database will be UTF-8 if
+ ** sqlite3_open() or sqlite3_open_v2() is called and
+ ** UTF-16 in the native byte order if sqlite3_open16() is used.
  **
- ** {F12912} The progress callback is invoked once for every N virtual
+ ** Whether or not an error occurs when it is opened, resources
- **          machine opcodes, where N is the second argument to
+ ** associated with the [database connection] handle should be released by
- **          the [sqlite3_progress_handler()] call that registered
+ ** passing it to [sqlite3_close()] when it is no longer required.
- **          the callback.  <todo>What if N is less than 1?</todo>
  **
- ** {F12913} The progress callback itself is identified by the third
+ ** The sqlite3_open_v2() interface works like sqlite3_open()
- **          argument to [sqlite3_progress_handler()].
+ ** except that it accepts two additional parameters for additional control
+ ** over the new database connection.  ^(The flags parameter to
+ ** sqlite3_open_v2() can take one of
+ ** the following three values, optionally combined with the
+ ** [SQLITE_OPEN_NOMUTEX], [SQLITE_OPEN_FULLMUTEX], [SQLITE_OPEN_SHAREDCACHE],
+ ** [SQLITE_OPEN_PRIVATECACHE], and/or [SQLITE_OPEN_URI] flags:)^
+ **
+ ** <dl>
+ ** ^(<dt>[SQLITE_OPEN_READONLY]</dt>
+ ** <dd>The database is opened in read-only mode.  If the database does not
+ ** already exist, an error is returned.</dd>)^
+ **
+ ** ^(<dt>[SQLITE_OPEN_READWRITE]</dt>
+ ** <dd>The database is opened for reading and writing if possible, or reading
+ ** only if the file is write protected by the operating system.  In either
+ ** case the database must already exist, otherwise an error is returned.</dd>)^
+ **
+ ** ^(<dt>[SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]</dt>
+ ** <dd>The database is opened for reading and writing, and is created if
+ ** it does not already exist. This is the behavior that is always used for
+ ** sqlite3_open() and sqlite3_open16().</dd>)^
+ ** </dl>
+ **
+ ** If the 3rd parameter to sqlite3_open_v2() is not one of the
+ ** combinations shown above optionally combined with other
+ ** [SQLITE_OPEN_READONLY | SQLITE_OPEN_* bits]
+ ** then the behavior is undefined.
  **
- ** {F12914} The fourth argument [sqlite3_progress_handler()] is a
+ ** ^If the [SQLITE_OPEN_NOMUTEX] flag is set, then the database connection
- ***         void pointer passed to the progress callback
+ ** opens in the multi-thread [threading mode] as long as the single-thread
- **          function each time it is invoked.
+ ** mode has not been set at compile-time or start-time.  ^If the
+ ** [SQLITE_OPEN_FULLMUTEX] flag is set then the database connection opens
+ ** in the serialized [threading mode] unless single-thread was
+ ** previously selected at compile-time or start-time.
+ ** ^The [SQLITE_OPEN_SHAREDCACHE] flag causes the database connection to be
+ ** eligible to use [shared cache mode], regardless of whether or not shared
+ ** cache is enabled using [sqlite3_enable_shared_cache()].  ^The
+ ** [SQLITE_OPEN_PRIVATECACHE] flag causes the database connection to not
+ ** participate in [shared cache mode] even if it is enabled.
+ **
+ ** ^The fourth parameter to sqlite3_open_v2() is the name of the
+ ** [sqlite3_vfs] object that defines the operating system interface that
+ ** the new database connection should use.  ^If the fourth parameter is
+ ** a NULL pointer then the default [sqlite3_vfs] object is used.
+ **
+ ** ^If the filename is ":memory:", then a private, temporary in-memory database
+ ** is created for the connection.  ^This in-memory database will vanish when
+ ** the database connection is closed.  Future versions of SQLite might
+ ** make use of additional special filenames that begin with the ":" character.
+ ** It is recommended that when a database filename actually does begin with
+ ** a ":" character you should prefix the filename with a pathname such as
+ ** "./" to avoid ambiguity.
  **
- ** {F12915} If a call to [sqlite3_step()] results in fewer than
+ ** ^If the filename is an empty string, then a private, temporary
- **          N opcodes being executed,
+ ** on-disk database will be created.  ^This private database will be
- **          then the progress callback is never invoked. {END}
+ ** automatically deleted as soon as the database connection is closed.
- **
- ** {F12916} Every call to [sqlite3_progress_handler()]
- **          overwrites any previously registere progress handler.
  **
- ** {F12917} If the progress handler callback is NULL then no progress
+ ** [[URI filenames in sqlite3_open()]] <h3>URI Filenames</h3>
- **          handler is invoked.
  **
- ** {F12918} If the progress callback returns a result other than 0, then
+ ** ^If [URI filename] interpretation is enabled, and the filename argument
- **          the behavior is a if [sqlite3_interrupt()] had been called.
+ ** begins with "file:", then the filename is interpreted as a URI. ^URI
- */
+ ** filename interpretation is enabled if the [SQLITE_OPEN_URI] flag is
- void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
+ ** set in the fourth argument to sqlite3_open_v2(), or if it has
+ ** been enabled globally using the [SQLITE_CONFIG_URI] option with the
- /*
+ ** [sqlite3_config()] method or by the [SQLITE_USE_URI] compile-time option.
- ** CAPI3REF: Opening A New Database Connection {F12700}
+ ** As of SQLite version 3.7.7, URI filename interpretation is turned off
- **
+ ** by default, but future releases of SQLite might enable URI filename
- ** These routines open an SQLite database file whose name
+ ** interpretation by default.  See "[URI filenames]" for additional
- ** is given by the filename argument.
+ ** information.
- ** The filename argument is interpreted as UTF-8
- ** for [sqlite3_open()] and [sqlite3_open_v2()] and as UTF-16
- ** in the native byte order for [sqlite3_open16()].
- ** An [sqlite3*] handle is usually returned in *ppDb, even
- ** if an error occurs.  The only exception is if SQLite is unable
- ** to allocate memory to hold the [sqlite3] object, a NULL will
- ** be written into *ppDb instead of a pointer to the [sqlite3] object.
- ** If the database is opened (and/or created)
- ** successfully, then [SQLITE_OK] is returned.  Otherwise an
- ** error code is returned.  The
- ** [sqlite3_errmsg()] or [sqlite3_errmsg16()]  routines can be used to obtain
- ** an English language description of the error.
- **
- ** The default encoding for the database will be UTF-8 if
- ** [sqlite3_open()] or [sqlite3_open_v2()] is called and
- ** UTF-16 in the native byte order if [sqlite3_open16()] is used.
  **
- ** Whether or not an error occurs when it is opened, resources
+ ** URI filenames are parsed according to RFC 3986. ^If the URI contains an
- ** associated with the [sqlite3*] handle should be released by passing it
+ ** authority, then it must be either an empty string or the string
- ** to [sqlite3_close()] when it is no longer required.
+ ** "localhost". ^If the authority is not an empty string or "localhost", an
+ ** error is returned to the caller. ^The fragment component of a URI, if
+ ** present, is ignored.
+ **
+ ** ^SQLite uses the path component of the URI as the name of the disk file
+ ** which contains the database. ^If the path begins with a '/' character,
+ ** then it is interpreted as an absolute path. ^If the path does not begin
+ ** with a '/' (meaning that the authority section is omitted from the URI)
+ ** then the path is interpreted as a relative path.
+ ** ^On windows, the first component of an absolute path
+ ** is a drive specification (e.g. "C:").
+ **
+ ** [[core URI query parameters]]
+ ** The query component of a URI may contain parameters that are interpreted
+ ** either by SQLite itself, or by a [VFS | custom VFS implementation].
+ ** SQLite interprets the following three query parameters:
  **
- ** The [sqlite3_open_v2()] interface works like [sqlite3_open()]
+ ** <ul>
- ** except that it acccepts two additional parameters for additional control
+ **   <li> <b>vfs</b>: ^The "vfs" parameter may be used to specify the name of
- ** over the new database connection.  The flags parameter can be
+ **     a VFS object that provides the operating system interface that should
- ** one of:
+ **     be used to access the database file on disk. ^If this option is set to
+ **     an empty string the default VFS object is used. ^Specifying an unknown
+ **     VFS is an error. ^If sqlite3_open_v2() is used and the vfs option is
+ **     present, then the VFS specified by the option takes precedence over
+ **     the value passed as the fourth parameter to sqlite3_open_v2().
+ **
+ **   <li> <b>mode</b>: ^(The mode parameter may be set to either "ro", "rw",
+ **     "rwc", or "memory". Attempting to set it to any other value is
+ **     an error)^.
+ **     ^If "ro" is specified, then the database is opened for read-only
+ **     access, just as if the [SQLITE_OPEN_READONLY] flag had been set in the
+ **     third argument to sqlite3_open_v2(). ^If the mode option is set to
+ **     "rw", then the database is opened for read-write (but not create)
+ **     access, as if SQLITE_OPEN_READWRITE (but not SQLITE_OPEN_CREATE) had
+ **     been set. ^Value "rwc" is equivalent to setting both
+ **     SQLITE_OPEN_READWRITE and SQLITE_OPEN_CREATE.  ^If the mode option is
+ **     set to "memory" then a pure [in-memory database] that never reads
+ **     or writes from disk is used. ^It is an error to specify a value for
+ **     the mode parameter that is less restrictive than that specified by
+ **     the flags passed in the third parameter to sqlite3_open_v2().
+ **
+ **   <li> <b>cache</b>: ^The cache parameter may be set to either "shared" or
+ **     "private". ^Setting it to "shared" is equivalent to setting the
+ **     SQLITE_OPEN_SHAREDCACHE bit in the flags argument passed to
+ **     sqlite3_open_v2(). ^Setting the cache parameter to "private" is
+ **     equivalent to setting the SQLITE_OPEN_PRIVATECACHE bit.
+ **     ^If sqlite3_open_v2() is used and the "cache" parameter is present in
+ **     a URI filename, its value overrides any behavior requested by setting
+ **     SQLITE_OPEN_PRIVATECACHE or SQLITE_OPEN_SHAREDCACHE flag.
+ ** </ul>
  **
- ** <ol>
+ ** ^Specifying an unknown parameter in the query component of a URI is not an
- ** <li>  [SQLITE_OPEN_READONLY]
+ ** error.  Future versions of SQLite might understand additional query
- ** <li>  [SQLITE_OPEN_READWRITE]
+ ** parameters.  See "[query parameters with special meaning to SQLite]" for
- ** <li>  [SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]
+ ** additional information.
- ** </ol>
  **
- ** The first value opens the database read-only.
+ ** [[URI filename examples]] <h3>URI filename examples</h3>
- ** If the database does not previously exist, an error is returned.
- ** The second option opens
- ** the database for reading and writing if possible, or reading only if
- ** if the file is write protected.  In either case the database
- ** must already exist or an error is returned.  The third option
- ** opens the database for reading and writing and creates it if it does
- ** not already exist.
- ** The third options is behavior that is always used for [sqlite3_open()]
- ** and [sqlite3_open16()].
- **
- ** If the filename is ":memory:", then an private
- ** in-memory database is created for the connection.  This in-memory
- ** database will vanish when the database connection is closed.  Future
- ** version of SQLite might make use of additional special filenames
- ** that begin with the ":" character.  It is recommended that
- ** when a database filename really does begin with
- ** ":" that you prefix the filename with a pathname like "./" to
- ** avoid ambiguity.
  **
- ** If the filename is an empty string, then a private temporary
+ ** <table border="1" align=center cellpadding=5>
- ** on-disk database will be created.  This private database will be
+ ** <tr><th> URI filenames <th> Results
- ** automatically deleted as soon as the database connection is closed.
+ ** <tr><td> file:data.db <td>
+ **          Open the file "data.db" in the current directory.
+ ** <tr><td> file:/home/fred/data.db<br>
+ **          file:///home/fred/data.db <br>
+ **          file://localhost/home/fred/data.db <br> <td>
+ **          Open the database file "/home/fred/data.db".
+ ** <tr><td> file://darkstar/home/fred/data.db <td>
+ **          An error. "darkstar" is not a recognized authority.
+ ** <tr><td style="white-space:nowrap">
+ **          file:///C:/Documents%20and%20Settings/fred/Desktop/data.db
+ **     <td> Windows only: Open the file "data.db" on fred's desktop on drive
+ **          C:. Note that the %20 escaping in this example is not strictly
+ **          necessary - space characters can be used literally
+ **          in URI filenames.
+ ** <tr><td> file:data.db?mode=ro&cache=private <td>
+ **          Open file "data.db" in the current directory for read-only access.
+ **          Regardless of whether or not shared-cache mode is enabled by
+ **          default, use a private cache.
+ ** <tr><td> file:/home/fred/data.db?vfs=unix-nolock <td>
+ **          Open file "/home/fred/data.db". Use the special VFS "unix-nolock".
+ ** <tr><td> file:data.db?mode=readonly <td>
+ **          An error. "readonly" is not a valid option for the "mode" parameter.
+ ** </table>
  **
- ** The fourth parameter to sqlite3_open_v2() is the name of the
+ ** ^URI hexadecimal escape sequences (%HH) are supported within the path and
- ** [sqlite3_vfs] object that defines the operating system
+ ** query components of a URI. A hexadecimal escape sequence consists of a
- ** interface that the new database connection should use.  If the
+ ** percent sign - "%" - followed by exactly two hexadecimal digits
- ** fourth parameter is a NULL pointer then the default [sqlite3_vfs]
+ ** specifying an octet value. ^Before the path or query components of a
- ** object is used.
+ ** URI filename are interpreted, they are encoded using UTF-8 and all
+ ** hexadecimal escape sequences replaced by a single byte containing the
+ ** corresponding octet. If this process generates an invalid UTF-8 encoding,
+ ** the results are undefined.
  **
- ** <b>Note to windows users:</b>  The encoding used for the filename argument
+ ** <b>Note to Windows users:</b>  The encoding used for the filename argument
- ** of [sqlite3_open()] and [sqlite3_open_v2()] must be UTF-8, not whatever
+ ** of sqlite3_open() and sqlite3_open_v2() must be UTF-8, not whatever
  ** codepage is currently defined.  Filenames containing international
  ** characters must be converted to UTF-8 prior to passing them into
- ** [sqlite3_open()] or [sqlite3_open_v2()].
+ ** sqlite3_open() or sqlite3_open_v2().
  **
- ** INVARIANTS:
+ ** <b>Note to Windows Runtime users:</b>  The temporary directory must be set
+ ** prior to calling sqlite3_open() or sqlite3_open_v2().  Otherwise, various
+ ** features that require the use of temporary files may fail.
  **
- ** {F12701} The [sqlite3_open()], [sqlite3_open16()], and
+ ** See also: [sqlite3_temp_directory]
- **          [sqlite3_open_v2()] interfaces create a new
- **          [database connection] associated with
- **          the database file given in their first parameter.
- **
- ** {F12702} The filename argument is interpreted as UTF-8
- **          for [sqlite3_open()] and [sqlite3_open_v2()] and as UTF-16
- **          in the native byte order for [sqlite3_open16()].
- **
- ** {F12703} A successful invocation of [sqlite3_open()], [sqlite3_open16()],
- **          or [sqlite3_open_v2()] writes a pointer to a new
- **          [database connection] into *ppDb.
- **
- ** {F12704} The [sqlite3_open()], [sqlite3_open16()], and
- **          [sqlite3_open_v2()] interfaces return [SQLITE_OK] upon success,
- **          or an appropriate [error code] on failure.
- **
- ** {F12706} The default text encoding for a new database created using
- **          [sqlite3_open()] or [sqlite3_open_v2()] will be UTF-8.
- **
- ** {F12707} The default text encoding for a new database created using
- **          [sqlite3_open16()] will be UTF-16.
- **
- ** {F12709} The [sqlite3_open(F,D)] interface is equivalent to
- **          [sqlite3_open_v2(F,D,G,0)] where the G parameter is
- **          [SQLITE_OPEN_READWRITE]|[SQLITE_OPEN_CREATE].
- **
- ** {F12711} If the G parameter to [sqlite3_open_v2(F,D,G,V)] contains the
- **          bit value [SQLITE_OPEN_READONLY] then the database is opened
- **          for reading only.
- **
- ** {F12712} If the G parameter to [sqlite3_open_v2(F,D,G,V)] contains the
- **          bit value [SQLITE_OPEN_READWRITE] then the database is opened
- **          reading and writing if possible, or for reading only if the
- **          file is write protected by the operating system.
- **
- ** {F12713} If the G parameter to [sqlite3_open(v2(F,D,G,V)] omits the
- **          bit value [SQLITE_OPEN_CREATE] and the database does not
- **          previously exist, an error is returned.
- **
- ** {F12714} If the G parameter to [sqlite3_open(v2(F,D,G,V)] contains the
- **          bit value [SQLITE_OPEN_CREATE] and the database does not
- **          previously exist, then an attempt is made to create and
- **          initialize the database.
- **
- ** {F12717} If the filename argument to [sqlite3_open()], [sqlite3_open16()],
- **          or [sqlite3_open_v2()] is ":memory:", then an private,
- **          ephemeral, in-memory database is created for the connection.
- **          <todo>Is SQLITE_OPEN_CREATE|SQLITE_OPEN_READWRITE required
- **          in sqlite3_open_v2()?</todo>
- **
- ** {F12719} If the filename is NULL or an empty string, then a private,
- **          ephermeral on-disk database will be created.
- **          <todo>Is SQLITE_OPEN_CREATE|SQLITE_OPEN_READWRITE required
- **          in sqlite3_open_v2()?</todo>
- **
- ** {F12721} The [database connection] created by
- **          [sqlite3_open_v2(F,D,G,V)] will use the
- **          [sqlite3_vfs] object identified by the V parameter, or
- **          the default [sqlite3_vfs] object is V is a NULL pointer.
  */
- int sqlite3_open(
+ SQLITE_API int sqlite3_open(
    const char *filename,   /* Database filename (UTF-8) */
    sqlite3 **ppDb          /* OUT: SQLite db handle */
  );
- int sqlite3_open16(
+ SQLITE_API int sqlite3_open16(
    const void *filename,   /* Database filename (UTF-16) */
    sqlite3 **ppDb          /* OUT: SQLite db handle */
  );
- int sqlite3_open_v2(
+ SQLITE_API int sqlite3_open_v2(
    const char *filename,   /* Database filename (UTF-8) */
    sqlite3 **ppDb,         /* OUT: SQLite db handle */
    int flags,              /* Flags */
- Line 2057  int sqlite3_open_v2(
+ Line 2803  int sqlite3_open_v2(
  );
  /*
- ** CAPI3REF: Error Codes And Messages {F12800}
+ ** CAPI3REF: Obtain Values For URI Parameters
  **
- ** The sqlite3_errcode() interface returns the numeric
+ ** These are utility routines, useful to VFS implementations, that check
- ** [SQLITE_OK | result code] or [SQLITE_IOERR_READ | extended result code]
+ ** to see if a database file was a URI that contained a specific query
- ** for the most recent failed sqlite3_* API call associated
+ ** parameter, and if so obtains the value of that query parameter.
- ** with [sqlite3] handle 'db'. If a prior API call failed but the
+ **
- ** most recent API call succeeded, the return value from sqlite3_errcode()
+ ** If F is the database filename pointer passed into the xOpen() method of
- ** is undefined.
+ ** a VFS implementation when the flags parameter to xOpen() has one or
- **
+ ** more of the [SQLITE_OPEN_URI] or [SQLITE_OPEN_MAIN_DB] bits set and
- ** The sqlite3_errmsg() and sqlite3_errmsg16() return English-language
+ ** P is the name of the query parameter, then
- ** text that describes the error, as either UTF8 or UTF16 respectively.
+ ** sqlite3_uri_parameter(F,P) returns the value of the P
- ** Memory to hold the error message string is managed internally.
+ ** parameter if it exists or a NULL pointer if P does not appear as a
- ** The application does not need to worry with freeing the result.
+ ** query parameter on F.  If P is a query parameter of F
+ ** has no explicit value, then sqlite3_uri_parameter(F,P) returns
+ ** a pointer to an empty string.
+ **
+ ** The sqlite3_uri_boolean(F,P,B) routine assumes that P is a boolean
+ ** parameter and returns true (1) or false (0) according to the value
+ ** of P.  The sqlite3_uri_boolean(F,P,B) routine returns true (1) if the
+ ** value of query parameter P is one of "yes", "true", or "on" in any
+ ** case or if the value begins with a non-zero number.  The
+ ** sqlite3_uri_boolean(F,P,B) routines returns false (0) if the value of
+ ** query parameter P is one of "no", "false", or "off" in any case or
+ ** if the value begins with a numeric zero.  If P is not a query
+ ** parameter on F or if the value of P is does not match any of the
+ ** above, then sqlite3_uri_boolean(F,P,B) returns (B!=0).
+ **
+ ** The sqlite3_uri_int64(F,P,D) routine converts the value of P into a
+ ** 64-bit signed integer and returns that integer, or D if P does not
+ ** exist.  If the value of P is something other than an integer, then
+ ** zero is returned.
+ **
+ ** If F is a NULL pointer, then sqlite3_uri_parameter(F,P) returns NULL and
+ ** sqlite3_uri_boolean(F,P,B) returns B.  If F is not a NULL pointer and
+ ** is not a database file pathname pointer that SQLite passed into the xOpen
+ ** VFS method, then the behavior of this routine is undefined and probably
+ ** undesirable.
+ */
+ SQLITE_API const char *sqlite3_uri_parameter(const char *zFilename, const char *zParam);
+ SQLITE_API int sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault);
+ SQLITE_API sqlite3_int64 sqlite3_uri_int64(const char*, const char*, sqlite3_int64);
+ /*
+ ** CAPI3REF: Error Codes And Messages
+ **
+ ** ^The sqlite3_errcode() interface returns the numeric [result code] or
+ ** [extended result code] for the most recent failed sqlite3_* API call
+ ** associated with a [database connection]. If a prior API call failed
+ ** but the most recent API call succeeded, the return value from
+ ** sqlite3_errcode() is undefined.  ^The sqlite3_extended_errcode()
+ ** interface is the same except that it always returns the
+ ** [extended result code] even when extended result codes are
+ ** disabled.
+ **
+ ** ^The sqlite3_errmsg() and sqlite3_errmsg16() return English-language
+ ** text that describes the error, as either UTF-8 or UTF-16 respectively.
+ ** ^(Memory to hold the error message string is managed internally.
+ ** The application does not need to worry about freeing the result.
  ** However, the error string might be overwritten or deallocated by
- ** subsequent calls to other SQLite interface functions.
+ ** subsequent calls to other SQLite interface functions.)^
- **
- ** INVARIANTS:
- **
- ** {F12801} The [sqlite3_errcode(D)] interface returns the numeric
- **          [SQLITE_OK | result code] or
- **          [SQLITE_IOERR_READ | extended result code]
- **          for the most recently failed interface call associated
- **          with [database connection] D.
- **
- ** {F12803} The [sqlite3_errmsg(D)] and [sqlite3_errmsg16(D)]
- **          interfaces return English-language text that describes
- **          the error in the mostly recently failed interface call,
- **          encoded as either UTF8 or UTF16 respectively.
  **
- ** {F12807} The strings returned by [sqlite3_errmsg()] and [sqlite3_errmsg16()]
+ ** ^The sqlite3_errstr() interface returns the English-language text
- **          are valid until the next SQLite interface call.
+ ** that describes the [result code], as UTF-8.
- **
+ ** ^(Memory to hold the error message string is managed internally
- ** {F12808} Calls to API routines that do not return an error code
+ ** and must not be freed by the application)^.
- **          (example: [sqlite3_data_count()]) do not
+ **
- **          change the error code or message returned by
+ ** When the serialized [threading mode] is in use, it might be the
- **          [sqlite3_errcode()], [sqlite3_errmsg()], or [sqlite3_errmsg16()].
+ ** case that a second error occurs on a separate thread in between
- **
+ ** the time of the first error and the call to these interfaces.
- ** {F12809} Interfaces that are not associated with a specific
+ ** When that happens, the second error will be reported since these
- **          [database connection] (examples:
+ ** interfaces always report the most recent result.  To avoid
- **          [sqlite3_mprintf()] or [sqlite3_enable_shared_cache()]
+ ** this, each thread can obtain exclusive use of the [database connection] D
- **          do not change the values returned by
+ ** by invoking [sqlite3_mutex_enter]([sqlite3_db_mutex](D)) before beginning
- **          [sqlite3_errcode()], [sqlite3_errmsg()], or [sqlite3_errmsg16()].
+ ** to use D and invoking [sqlite3_mutex_leave]([sqlite3_db_mutex](D)) after
- */
+ ** all calls to the interfaces listed here are completed.
- int sqlite3_errcode(sqlite3 *db);
+ **
- const char *sqlite3_errmsg(sqlite3*);
+ ** If an interface fails with SQLITE_MISUSE, that means the interface
- const void *sqlite3_errmsg16(sqlite3*);
+ ** was invoked incorrectly by the application.  In that case, the
+ ** error code and message may or may not be set.
+ */
+ SQLITE_API int sqlite3_errcode(sqlite3 *db);
+ SQLITE_API int sqlite3_extended_errcode(sqlite3 *db);
+ SQLITE_API const char *sqlite3_errmsg(sqlite3*);
+ SQLITE_API const void *sqlite3_errmsg16(sqlite3*);
+ SQLITE_API const char *sqlite3_errstr(int);
  /*
- ** CAPI3REF: SQL Statement Object {F13000}
+ ** CAPI3REF: SQL Statement Object
  ** KEYWORDS: {prepared statement} {prepared statements}
  **
- ** An instance of this object represent single SQL statements.  This
+ ** An instance of this object represents a single SQL statement.
- ** object is variously known as a "prepared statement" or a
+ ** This object is variously known as a "prepared statement" or a
  ** "compiled SQL statement" or simply as a "statement".
  **
  ** The life of a statement object goes something like this:
  **
  ** <ol>
  ** <li> Create the object using [sqlite3_prepare_v2()] or a related
  **      function.
- ** <li> Bind values to host parameters using
+ ** <li> Bind values to [host parameters] using the sqlite3_bind_*()
- **      [sqlite3_bind_blob | sqlite3_bind_* interfaces].
+ **      interfaces.
  ** <li> Run the SQL by calling [sqlite3_step()] one or more times.
  ** <li> Reset the statement using [sqlite3_reset()] then go back
  **      to step 2.  Do this zero or more times.
- Line 2131  const void *sqlite3_errmsg16(sqlite3*);
+ Line 2917  const void *sqlite3_errmsg16(sqlite3*);
  typedef struct sqlite3_stmt sqlite3_stmt;
  /*
- ** CAPI3REF: Compiling An SQL Statement {F13010}
+ ** CAPI3REF: Run-time Limits
+ **
+ ** ^(This interface allows the size of various constructs to be limited
+ ** on a connection by connection basis.  The first parameter is the
+ ** [database connection] whose limit is to be set or queried.  The
+ ** second parameter is one of the [limit categories] that define a
+ ** class of constructs to be size limited.  The third parameter is the
+ ** new limit for that construct.)^
+ **
+ ** ^If the new limit is a negative number, the limit is unchanged.
+ ** ^(For each limit category SQLITE_LIMIT_<i>NAME</i> there is a
+ ** [limits | hard upper bound]
+ ** set at compile-time by a C preprocessor macro called
+ ** [limits | SQLITE_MAX_<i>NAME</i>].
+ ** (The "_LIMIT_" in the name is changed to "_MAX_".))^
+ ** ^Attempts to increase a limit above its hard upper bound are
+ ** silently truncated to the hard upper bound.
+ **
+ ** ^Regardless of whether or not the limit was changed, the
+ ** [sqlite3_limit()] interface returns the prior value of the limit.
+ ** ^Hence, to find the current value of a limit without changing it,
+ ** simply invoke this interface with the third parameter set to -1.
+ **
+ ** Run-time limits are intended for use in applications that manage
+ ** both their own internal database and also databases that are controlled
+ ** by untrusted external sources.  An example application might be a
+ ** web browser that has its own databases for storing history and
+ ** separate databases controlled by JavaScript applications downloaded
+ ** off the Internet.  The internal databases can be given the
+ ** large, default limits.  Databases managed by external sources can
+ ** be given much smaller limits designed to prevent a denial of service
+ ** attack.  Developers might also want to use the [sqlite3_set_authorizer()]
+ ** interface to further control untrusted SQL.  The size of the database
+ ** created by an untrusted script can be contained using the
+ ** [max_page_count] [PRAGMA].
+ **
+ ** New run-time limit categories may be added in future releases.
+ */
+ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal);
+ /*
+ ** CAPI3REF: Run-Time Limit Categories
+ ** KEYWORDS: {limit category} {*limit categories}
+ **
+ ** These constants define various performance limits
+ ** that can be lowered at run-time using [sqlite3_limit()].
+ ** The synopsis of the meanings of the various limits is shown below.
+ ** Additional information is available at [limits | Limits in SQLite].
+ **
+ ** <dl>
+ ** [[SQLITE_LIMIT_LENGTH]] ^(<dt>SQLITE_LIMIT_LENGTH</dt>
+ ** <dd>The maximum size of any string or BLOB or table row, in bytes.<dd>)^
+ **
+ ** [[SQLITE_LIMIT_SQL_LENGTH]] ^(<dt>SQLITE_LIMIT_SQL_LENGTH</dt>
+ ** <dd>The maximum length of an SQL statement, in bytes.</dd>)^
+ **
+ ** [[SQLITE_LIMIT_COLUMN]] ^(<dt>SQLITE_LIMIT_COLUMN</dt>
+ ** <dd>The maximum number of columns in a table definition or in the
+ ** result set of a [SELECT] or the maximum number of columns in an index
+ ** or in an ORDER BY or GROUP BY clause.</dd>)^
+ **
+ ** [[SQLITE_LIMIT_EXPR_DEPTH]] ^(<dt>SQLITE_LIMIT_EXPR_DEPTH</dt>
+ ** <dd>The maximum depth of the parse tree on any expression.</dd>)^
+ **
+ ** [[SQLITE_LIMIT_COMPOUND_SELECT]] ^(<dt>SQLITE_LIMIT_COMPOUND_SELECT</dt>
+ ** <dd>The maximum number of terms in a compound SELECT statement.</dd>)^
+ **
+ ** [[SQLITE_LIMIT_VDBE_OP]] ^(<dt>SQLITE_LIMIT_VDBE_OP</dt>
+ ** <dd>The maximum number of instructions in a virtual machine program
+ ** used to implement an SQL statement.  This limit is not currently
+ ** enforced, though that might be added in some future release of
+ ** SQLite.</dd>)^
+ **
+ ** [[SQLITE_LIMIT_FUNCTION_ARG]] ^(<dt>SQLITE_LIMIT_FUNCTION_ARG</dt>
+ ** <dd>The maximum number of arguments on a function.</dd>)^
+ **
+ ** [[SQLITE_LIMIT_ATTACHED]] ^(<dt>SQLITE_LIMIT_ATTACHED</dt>
+ ** <dd>The maximum number of [ATTACH | attached databases].)^</dd>
+ **
+ ** [[SQLITE_LIMIT_LIKE_PATTERN_LENGTH]]
+ ** ^(<dt>SQLITE_LIMIT_LIKE_PATTERN_LENGTH</dt>
+ ** <dd>The maximum length of the pattern argument to the [LIKE] or
+ ** [GLOB] operators.</dd>)^
+ **
+ ** [[SQLITE_LIMIT_VARIABLE_NUMBER]]
+ ** ^(<dt>SQLITE_LIMIT_VARIABLE_NUMBER</dt>
+ ** <dd>The maximum index number of any [parameter] in an SQL statement.)^
+ **
+ ** [[SQLITE_LIMIT_TRIGGER_DEPTH]] ^(<dt>SQLITE_LIMIT_TRIGGER_DEPTH</dt>
+ ** <dd>The maximum depth of recursion for triggers.</dd>)^
+ ** </dl>
+ */
+ #define SQLITE_LIMIT_LENGTH                    0
+ #define SQLITE_LIMIT_SQL_LENGTH                1
+ #define SQLITE_LIMIT_COLUMN                    2
+ #define SQLITE_LIMIT_EXPR_DEPTH                3
+ #define SQLITE_LIMIT_COMPOUND_SELECT           4
+ #define SQLITE_LIMIT_VDBE_OP                   5
+ #define SQLITE_LIMIT_FUNCTION_ARG              6
+ #define SQLITE_LIMIT_ATTACHED                  7
+ #define SQLITE_LIMIT_LIKE_PATTERN_LENGTH       8
+ #define SQLITE_LIMIT_VARIABLE_NUMBER           9
+ #define SQLITE_LIMIT_TRIGGER_DEPTH            10
+ /*
+ ** CAPI3REF: Compiling An SQL Statement
+ ** KEYWORDS: {SQL statement compiler}
  **
  ** To execute an SQL query, it must first be compiled into a byte-code
  ** program using one of these routines.
+ **
+ ** The first argument, "db", is a [database connection] obtained from a
+ ** prior successful call to [sqlite3_open()], [sqlite3_open_v2()] or
+ ** [sqlite3_open16()].  The database connection must not have been closed.
  **
- ** The first argument "db" is an [database connection]
+ ** The second argument, "zSql", is the statement to be compiled, encoded
- ** obtained from a prior call to [sqlite3_open()], [sqlite3_open_v2()]
- ** or [sqlite3_open16()].
- ** The second argument "zSql" is the statement to be compiled, encoded
  ** as either UTF-8 or UTF-16.  The sqlite3_prepare() and sqlite3_prepare_v2()
- ** interfaces uses UTF-8 and sqlite3_prepare16() and sqlite3_prepare16_v2()
+ ** interfaces use UTF-8, and sqlite3_prepare16() and sqlite3_prepare16_v2()
- ** use UTF-16. {END}
+ ** use UTF-16.
  **
- ** If the nByte argument is less
+ ** ^If the nByte argument is less than zero, then zSql is read up to the
- ** than zero, then zSql is read up to the first zero terminator.
+ ** first zero terminator. ^If nByte is non-negative, then it is the maximum
- ** If nByte is non-negative, then it is the maximum number of
+ ** number of  bytes read from zSql.  ^When nByte is non-negative, the
- ** bytes read from zSql.  When nByte is non-negative, the
+ ** zSql string ends at either the first '\000' or '\u0000' character or
- ** zSql string ends at either the first '\000' or '\u0000' character or
+ ** the nByte-th byte, whichever comes first. If the caller knows
- ** until the nByte-th byte, whichever comes first. {END}
+ ** that the supplied string is nul-terminated, then there is a small
- **
+ ** performance advantage to be gained by passing an nByte parameter that
- ** *pzTail is made to point to the first byte past the end of the
+ ** is equal to the number of bytes in the input string <i>including</i>
- ** first SQL statement in zSql.  These routines only compiles the first
+ ** the nul-terminator bytes as this saves SQLite from having to
- ** statement in zSql, so *pzTail is left pointing to what remains
+ ** make a copy of the input string.
- ** uncompiled.
+ **
- **
+ ** ^If pzTail is not NULL then *pzTail is made to point to the first byte
- ** *ppStmt is left pointing to a compiled [prepared statement] that can be
+ ** past the end of the first SQL statement in zSql.  These routines only
- ** executed using [sqlite3_step()].  Or if there is an error, *ppStmt is
+ ** compile the first statement in zSql, so *pzTail is left pointing to
- ** set to NULL.  If the input text contains no SQL (if the input
+ ** what remains uncompiled.
- ** is and empty string or a comment) then *ppStmt is set to NULL.
+ **
- ** {U13018} The calling procedure is responsible for deleting the
+ ** ^*ppStmt is left pointing to a compiled [prepared statement] that can be
- ** compiled SQL statement
+ ** executed using [sqlite3_step()].  ^If there is an error, *ppStmt is set
- ** using [sqlite3_finalize()] after it has finished with it.
+ ** to NULL.  ^If the input text contains no SQL (if the input is an empty
+ ** string or a comment) then *ppStmt is set to NULL.
+ ** The calling procedure is responsible for deleting the compiled
+ ** SQL statement using [sqlite3_finalize()] after it has finished with it.
+ ** ppStmt may not be NULL.
  **
- ** On success, [SQLITE_OK] is returned.  Otherwise an
+ ** ^On success, the sqlite3_prepare() family of routines return [SQLITE_OK];
- ** [error code] is returned.
+ ** otherwise an [error code] is returned.
  **
  ** The sqlite3_prepare_v2() and sqlite3_prepare16_v2() interfaces are
  ** recommended for all new programs. The two older interfaces are retained
  ** for backwards compatibility, but their use is discouraged.
- ** In the "v2" interfaces, the prepared statement
+ ** ^In the "v2" interfaces, the prepared statement
  ** that is returned (the [sqlite3_stmt] object) contains a copy of the
- ** original SQL text. {END} This causes the [sqlite3_step()] interface to
+ ** original SQL text. This causes the [sqlite3_step()] interface to
- ** behave a differently in two ways:
+ ** behave differently in three ways:
  **
  ** <ol>
  ** <li>
- ** If the database schema changes, instead of returning [SQLITE_SCHEMA] as it
+ ** ^If the database schema changes, instead of returning [SQLITE_SCHEMA] as it
  ** always used to do, [sqlite3_step()] will automatically recompile the SQL
- ** statement and try to run it again.  If the schema has changed in
+ ** statement and try to run it again. As many as [SQLITE_MAX_SCHEMA_RETRY]
- ** a way that makes the statement no longer valid, [sqlite3_step()] will still
+ ** retries will occur before sqlite3_step() gives up and returns an error.
- ** return [SQLITE_SCHEMA].  But unlike the legacy behavior,
- ** [SQLITE_SCHEMA] is now a fatal error.  Calling
- ** [sqlite3_prepare_v2()] again will not make the
- ** error go away.  Note: use [sqlite3_errmsg()] to find the text
- ** of the parsing error that results in an [SQLITE_SCHEMA] return. {END}
  ** </li>
  **
  ** <li>
- ** When an error occurs,
+ ** ^When an error occurs, [sqlite3_step()] will return one of the detailed
- ** [sqlite3_step()] will return one of the detailed
+ ** [error codes] or [extended error codes].  ^The legacy behavior was that
- ** [error codes] or [extended error codes].
+ ** [sqlite3_step()] would only return a generic [SQLITE_ERROR] result code
- ** The legacy behavior was that [sqlite3_step()] would only return a generic
+ ** and the application would have to make a second call to [sqlite3_reset()]
- ** [SQLITE_ERROR] result code and you would have to make a second call to
+ ** in order to find the underlying cause of the problem. With the "v2" prepare
- ** [sqlite3_reset()] in order to find the underlying cause of the problem.
+ ** interfaces, the underlying reason for the error is returned immediately.
- ** With the "v2" prepare interfaces, the underlying reason for the error is
- ** returned immediately.
  ** </li>
- ** </ol>
- **
- ** INVARIANTS:
  **
- ** {F13011} The [sqlite3_prepare(db,zSql,...)] and
+ ** <li>
- **          [sqlite3_prepare_v2(db,zSql,...)] interfaces interpret the
+ ** ^If the specific value bound to [parameter | host parameter] in the
- **          text in their zSql parameter as UTF-8.
+ ** WHERE clause might influence the choice of query plan for a statement,
- **
+ ** then the statement will be automatically recompiled, as if there had been
- ** {F13012} The [sqlite3_prepare16(db,zSql,...)] and
+ ** a schema change, on the first  [sqlite3_step()] call following any change
- **          [sqlite3_prepare16_v2(db,zSql,...)] interfaces interpret the
+ ** to the [sqlite3_bind_text | bindings] of that [parameter].
- **          text in their zSql parameter as UTF-16 in the native byte order.
+ ** ^The specific value of WHERE-clause [parameter] might influence the
- **
+ ** choice of query plan if the parameter is the left-hand side of a [LIKE]
- ** {F13013} If the nByte argument to [sqlite3_prepare_v2(db,zSql,nByte,...)]
+ ** or [GLOB] operator or if the parameter is compared to an indexed column
- **          and its variants is less than zero, then SQL text is
+ ** and the [SQLITE_ENABLE_STAT3] compile-time option is enabled.
- **          read from zSql is read up to the first zero terminator.
+ ** the
- **
+ ** </li>
- ** {F13014} If the nByte argument to [sqlite3_prepare_v2(db,zSql,nByte,...)]
+ ** </ol>
- **          and its variants is non-negative, then nBytes bytes
- **          SQL text is read from zSql.
- **
- ** {F13015} In [sqlite3_prepare_v2(db,zSql,N,P,pzTail)] and its variants
- **          if the zSql input text contains more than one SQL statement
- **          and pzTail is not NULL, then *pzTail is made to point to the
- **          first byte past the end of the first SQL statement in zSql.
- **          <todo>What does *pzTail point to if there is one statement?</todo>
- **
- ** {F13016} A successful call to [sqlite3_prepare_v2(db,zSql,N,ppStmt,...)]
- **          or one of its variants writes into *ppStmt a pointer to a new
- **          [prepared statement] or a pointer to NULL
- **          if zSql contains nothing other than whitespace or comments.
- **
- ** {F13019} The [sqlite3_prepare_v2()] interface and its variants return
- **          [SQLITE_OK] or an appropriate [error code] upon failure.
- **
- ** {F13021} Before [sqlite3_prepare(db,zSql,nByte,ppStmt,pzTail)] or its
- **          variants returns an error (any value other than [SQLITE_OK])
- **          it first sets *ppStmt to NULL.
  */
- int sqlite3_prepare(
+ SQLITE_API int sqlite3_prepare(
    sqlite3 *db,            /* Database handle */
    const char *zSql,       /* SQL statement, UTF-8 encoded */
    int nByte,              /* Maximum length of zSql in bytes. */
    sqlite3_stmt **ppStmt,  /* OUT: Statement handle */
    const char **pzTail     /* OUT: Pointer to unused portion of zSql */
  );
- int sqlite3_prepare_v2(
+ SQLITE_API int sqlite3_prepare_v2(
    sqlite3 *db,            /* Database handle */
    const char *zSql,       /* SQL statement, UTF-8 encoded */
    int nByte,              /* Maximum length of zSql in bytes. */
    sqlite3_stmt **ppStmt,  /* OUT: Statement handle */
    const char **pzTail     /* OUT: Pointer to unused portion of zSql */
  );
- int sqlite3_prepare16(
+ SQLITE_API int sqlite3_prepare16(
    sqlite3 *db,            /* Database handle */
    const void *zSql,       /* SQL statement, UTF-16 encoded */
    int nByte,              /* Maximum length of zSql in bytes. */
    sqlite3_stmt **ppStmt,  /* OUT: Statement handle */
    const void **pzTail     /* OUT: Pointer to unused portion of zSql */
  );
- int sqlite3_prepare16_v2(
+ SQLITE_API int sqlite3_prepare16_v2(
    sqlite3 *db,            /* Database handle */
    const void *zSql,       /* SQL statement, UTF-16 encoded */
    int nByte,              /* Maximum length of zSql in bytes. */
- Line 2266  int sqlite3_prepare16_v2(
+ Line 3133  int sqlite3_prepare16_v2(
  );
  /*
- ** CAPIREF: Retrieving Statement SQL {F13100}
+ ** CAPI3REF: Retrieving Statement SQL
  **
- ** This intereface can be used to retrieve a saved copy of the original
+ ** ^This interface can be used to retrieve a saved copy of the original
- ** SQL text used to create a [prepared statement].
+ ** SQL text used to create a [prepared statement] if that statement was
+ ** compiled using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()].
+ */
+ SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt);
+ /*
+ ** CAPI3REF: Determine If An SQL Statement Writes The Database
  **
- ** INVARIANTS:
+ ** ^The sqlite3_stmt_readonly(X) interface returns true (non-zero) if
+ ** and only if the [prepared statement] X makes no direct changes to
+ ** the content of the database file.
  **
- ** {F13101} If the [prepared statement] passed as
+ ** Note that [application-defined SQL functions] or
- **          the an argument to [sqlite3_sql()] was compiled
+ ** [virtual tables] might change the database indirectly as a side effect.
- **          compiled using either [sqlite3_prepare_v2()] or
+ ** ^(For example, if an application defines a function "eval()" that
- **          [sqlite3_prepare16_v2()],
+ ** calls [sqlite3_exec()], then the following SQL statement would
- **          then [sqlite3_sql()] function returns a pointer to a
+ ** change the database file through side-effects:
- **          zero-terminated string containing a UTF-8 rendering
- **          of the original SQL statement.
  **
- ** {F13102} If the [prepared statement] passed as
+ ** <blockquote><pre>
- **          the an argument to [sqlite3_sql()] was compiled
+ **    SELECT eval('DELETE FROM t1') FROM t2;
- **          compiled using either [sqlite3_prepare()] or
+ ** </pre></blockquote>
- **          [sqlite3_prepare16()],
+ **
- **          then [sqlite3_sql()] function returns a NULL pointer.
+ ** But because the [SELECT] statement does not change the database file
+ ** directly, sqlite3_stmt_readonly() would still return true.)^
  **
- ** {F13103} The string returned by [sqlite3_sql(S)] is valid until the
+ ** ^Transaction control statements such as [BEGIN], [COMMIT], [ROLLBACK],
- **          [prepared statement] S is deleted using [sqlite3_finalize(S)].
+ ** [SAVEPOINT], and [RELEASE] cause sqlite3_stmt_readonly() to return true,
+ ** since the statements themselves do not actually modify the database but
+ ** rather they control the timing of when other statements modify the
+ ** database.  ^The [ATTACH] and [DETACH] statements also cause
+ ** sqlite3_stmt_readonly() to return true since, while those statements
+ ** change the configuration of a database connection, they do not make
+ ** changes to the content of the database files on disk.
+ */
+ SQLITE_API int sqlite3_stmt_readonly(sqlite3_stmt *pStmt);
+ /*
+ ** CAPI3REF: Determine If A Prepared Statement Has Been Reset
+ **
+ ** ^The sqlite3_stmt_busy(S) interface returns true (non-zero) if the
+ ** [prepared statement] S has been stepped at least once using
+ ** [sqlite3_step(S)] but has not run to completion and/or has not
+ ** been reset using [sqlite3_reset(S)].  ^The sqlite3_stmt_busy(S)
+ ** interface returns false if S is a NULL pointer.  If S is not a
+ ** NULL pointer and is not a pointer to a valid [prepared statement]
+ ** object, then the behavior is undefined and probably undesirable.
+ **
+ ** This interface can be used in combination [sqlite3_next_stmt()]
+ ** to locate all prepared statements associated with a database
+ ** connection that are in need of being reset.  This can be used,
+ ** for example, in diagnostic routines to search for prepared
+ ** statements that are holding a transaction open.
  */
- const char *sqlite3_sql(sqlite3_stmt *pStmt);
+ SQLITE_API int sqlite3_stmt_busy(sqlite3_stmt*);
  /*
- ** CAPI3REF:  Dynamically Typed Value Object  {F15000}
+ ** CAPI3REF: Dynamically Typed Value Object
+ ** KEYWORDS: {protected sqlite3_value} {unprotected sqlite3_value}
  **
  ** SQLite uses the sqlite3_value object to represent all values
- ** that are or can be stored in a database table.
+ ** that can be stored in a database table. SQLite uses dynamic typing
- ** SQLite uses dynamic typing for the values it stores.
+ ** for the values it stores.  ^Values stored in sqlite3_value objects
- ** Values stored in sqlite3_value objects can be
+ ** can be integers, floating point values, strings, BLOBs, or NULL.
- ** be integers, floating point values, strings, BLOBs, or NULL.
+ **
+ ** An sqlite3_value object may be either "protected" or "unprotected".
+ ** Some interfaces require a protected sqlite3_value.  Other interfaces
+ ** will accept either a protected or an unprotected sqlite3_value.
+ ** Every interface that accepts sqlite3_value arguments specifies
+ ** whether or not it requires a protected sqlite3_value.
+ **
+ ** The terms "protected" and "unprotected" refer to whether or not
+ ** a mutex is held.  An internal mutex is held for a protected
+ ** sqlite3_value object but no mutex is held for an unprotected
+ ** sqlite3_value object.  If SQLite is compiled to be single-threaded
+ ** (with [SQLITE_THREADSAFE=0] and with [sqlite3_threadsafe()] returning 0)
+ ** or if SQLite is run in one of reduced mutex modes
+ ** [SQLITE_CONFIG_SINGLETHREAD] or [SQLITE_CONFIG_MULTITHREAD]
+ ** then there is no distinction between protected and unprotected
+ ** sqlite3_value objects and they can be used interchangeably.  However,
+ ** for maximum code portability it is recommended that applications
+ ** still make the distinction between protected and unprotected
+ ** sqlite3_value objects even when not strictly required.
+ **
+ ** ^The sqlite3_value objects that are passed as parameters into the
+ ** implementation of [application-defined SQL functions] are protected.
+ ** ^The sqlite3_value object returned by
+ ** [sqlite3_column_value()] is unprotected.
+ ** Unprotected sqlite3_value objects may only be used with
+ ** [sqlite3_result_value()] and [sqlite3_bind_value()].
+ ** The [sqlite3_value_blob | sqlite3_value_type()] family of
+ ** interfaces require protected sqlite3_value objects.
  */
  typedef struct Mem sqlite3_value;
  /*
- ** CAPI3REF:  SQL Function Context Object {F16001}
+ ** CAPI3REF: SQL Function Context Object
  **
  ** The context in which an SQL function executes is stored in an
- ** sqlite3_context object.  A pointer to an sqlite3_context
+ ** sqlite3_context object.  ^A pointer to an sqlite3_context object
- ** object is always first parameter to application-defined SQL functions.
+ ** is always first parameter to [application-defined SQL functions].
+ ** The application-defined SQL function implementation will pass this
+ ** pointer through into calls to [sqlite3_result_int | sqlite3_result()],
+ ** [sqlite3_aggregate_context()], [sqlite3_user_data()],
+ ** [sqlite3_context_db_handle()], [sqlite3_get_auxdata()],
+ ** and/or [sqlite3_set_auxdata()].
  */
  typedef struct sqlite3_context sqlite3_context;
  /*
- ** CAPI3REF:  Binding Values To Prepared Statements {F13500}
+ ** CAPI3REF: Binding Values To Prepared Statements
- **
+ ** KEYWORDS: {host parameter} {host parameters} {host parameter name}
- ** In the SQL strings input to [sqlite3_prepare_v2()] and its
+ ** KEYWORDS: {SQL parameter} {SQL parameters} {parameter binding}
- ** variants, literals may be replace by a parameter in one
+ **
- ** of these forms:
+ ** ^(In the SQL statement text input to [sqlite3_prepare_v2()] and its variants,
+ ** literals may be replaced by a [parameter] that matches one of following
+ ** templates:
  **
  ** <ul>
  ** <li>  ?
- Line 2327  typedef struct sqlite3_context sqlite3_c
+ Line 3261  typedef struct sqlite3_context sqlite3_c
  ** <li>  $VVV
  ** </ul>
  **
- ** In the parameter forms shown above NNN is an integer literal,
+ ** In the templates above, NNN represents an integer literal,
- ** VVV alpha-numeric parameter name.
+ ** and VVV represents an alphanumeric identifier.)^  ^The values of these
- ** The values of these parameters (also called "host parameter names"
+ ** parameters (also called "host parameter names" or "SQL parameters")
- ** or "SQL parameters")
  ** can be set using the sqlite3_bind_*() routines defined here.
  **
- ** The first argument to the sqlite3_bind_*() routines always
+ ** ^The first argument to the sqlite3_bind_*() routines is always
- ** is a pointer to the [sqlite3_stmt] object returned from
+ ** a pointer to the [sqlite3_stmt] object returned from
- ** [sqlite3_prepare_v2()] or its variants. The second
+ ** [sqlite3_prepare_v2()] or its variants.
- ** argument is the index of the parameter to be set. The
+ **
- ** first parameter has an index of 1.  When the same named
+ ** ^The second argument is the index of the SQL parameter to be set.
- ** parameter is used more than once, second and subsequent
+ ** ^The leftmost SQL parameter has an index of 1.  ^When the same named
- ** occurrences have the same index as the first occurrence.
+ ** SQL parameter is used more than once, second and subsequent
- ** The index for named parameters can be looked up using the
+ ** occurrences have the same index as the first occurrence.
- ** [sqlite3_bind_parameter_name()] API if desired.  The index
+ ** ^The index for named parameters can be looked up using the
+ ** [sqlite3_bind_parameter_index()] API if desired.  ^The index
  ** for "?NNN" parameters is the value of NNN.
- ** The NNN value must be between 1 and the compile-time
+ ** ^The NNN value must be between 1 and the [sqlite3_limit()]
- ** parameter SQLITE_MAX_VARIABLE_NUMBER (default value: 999).
+ ** parameter [SQLITE_LIMIT_VARIABLE_NUMBER] (default value: 999).
  **
- ** The third argument is the value to bind to the parameter.
+ ** ^The third argument is the value to bind to the parameter.
+ ** ^If the third parameter to sqlite3_bind_text() or sqlite3_bind_text16()
+ ** or sqlite3_bind_blob() is a NULL pointer then the fourth parameter
+ ** is ignored and the end result is the same as sqlite3_bind_null().
+ **
+ ** ^(In those routines that have a fourth argument, its value is the
+ ** number of bytes in the parameter.  To be clear: the value is the
+ ** number of <u>bytes</u> in the value, not the number of characters.)^
+ ** ^If the fourth parameter to sqlite3_bind_text() or sqlite3_bind_text16()
+ ** is negative, then the length of the string is
+ ** the number of bytes up to the first zero terminator.
+ ** If the fourth parameter to sqlite3_bind_blob() is negative, then
+ ** the behavior is undefined.
+ ** If a non-negative fourth parameter is provided to sqlite3_bind_text()
+ ** or sqlite3_bind_text16() then that parameter must be the byte offset
+ ** where the NUL terminator would occur assuming the string were NUL
+ ** terminated.  If any NUL characters occur at byte offsets less than
+ ** the value of the fourth parameter then the resulting string value will
+ ** contain embedded NULs.  The result of expressions involving strings
+ ** with embedded NULs is undefined.
  **
- ** In those
+ ** ^The fifth argument to sqlite3_bind_blob(), sqlite3_bind_text(), and
- ** routines that have a fourth argument, its value is the number of bytes
- ** in the parameter.  To be clear: the value is the number of <u>bytes</u>
- ** in the value, not the number of characters.   The number
- ** of bytes does not include the zero-terminator at the end of strings.
- ** If the fourth parameter is negative, the length of the string is
- ** number of bytes up to the first zero terminator.
- **
- ** The fifth argument to sqlite3_bind_blob(), sqlite3_bind_text(), and
  ** sqlite3_bind_text16() is a destructor used to dispose of the BLOB or
- ** string after SQLite has finished with it. If the fifth argument is
+ ** string after SQLite has finished with it.  ^The destructor is called
+ ** to dispose of the BLOB or string even if the call to sqlite3_bind_blob(),
+ ** sqlite3_bind_text(), or sqlite3_bind_text16() fails.
+ ** ^If the fifth argument is
  ** the special value [SQLITE_STATIC], then SQLite assumes that the
  ** information is in static, unmanaged space and does not need to be freed.
- ** If the fifth argument has the value [SQLITE_TRANSIENT], then
+ ** ^If the fifth argument has the value [SQLITE_TRANSIENT], then
  ** SQLite makes its own private copy of the data immediately, before
  ** the sqlite3_bind_*() routine returns.
  **
- ** The sqlite3_bind_zeroblob() routine binds a BLOB of length N that
+ ** ^The sqlite3_bind_zeroblob() routine binds a BLOB of length N that
- ** is filled with zeros.  A zeroblob uses a fixed amount of memory
+ ** is filled with zeroes.  ^A zeroblob uses a fixed amount of memory
- ** (just an integer to hold it size) while it is being processed.
+ ** (just an integer to hold its size) while it is being processed.
- ** Zeroblobs are intended to serve as place-holders for BLOBs whose
+ ** Zeroblobs are intended to serve as placeholders for BLOBs whose
  ** content is later written using
- ** [sqlite3_blob_open | increment BLOB I/O] routines. A negative
+ ** [sqlite3_blob_open | incremental BLOB I/O] routines.
- ** value for the zeroblob results in a zero-length BLOB.
+ ** ^A negative value for the zeroblob results in a zero-length BLOB.
  **
- ** The sqlite3_bind_*() routines must be called after
+ ** ^If any of the sqlite3_bind_*() routines are called with a NULL pointer
- ** [sqlite3_prepare_v2()] (and its variants) or [sqlite3_reset()] and
+ ** for the [prepared statement] or with a prepared statement for which
- ** before [sqlite3_step()].
+ ** [sqlite3_step()] has been called more recently than [sqlite3_reset()],
- ** Bindings are not cleared by the [sqlite3_reset()] routine.
+ ** then the call will return [SQLITE_MISUSE].  If any sqlite3_bind_()
- ** Unbound parameters are interpreted as NULL.
+ ** routine is passed a [prepared statement] that has been finalized, the
- **
+ ** result is undefined and probably harmful.
- ** These routines return [SQLITE_OK] on success or an error code if
+ **
- ** anything goes wrong.  [SQLITE_RANGE] is returned if the parameter
+ ** ^Bindings are not cleared by the [sqlite3_reset()] routine.
- ** index is out of range.  [SQLITE_NOMEM] is returned if malloc fails.
+ ** ^Unbound parameters are interpreted as NULL.
- ** [SQLITE_MISUSE] might be returned if these routines are called on a
+ **
- ** virtual machine that is the wrong state or which has already been finalized.
+ ** ^The sqlite3_bind_* routines return [SQLITE_OK] on success or an
- ** Detection of misuse is unreliable.  Applications should not depend
+ ** [error code] if anything goes wrong.
- ** on SQLITE_MISUSE returns.  SQLITE_MISUSE is intended to indicate a
+ ** ^[SQLITE_RANGE] is returned if the parameter
- ** a logic error in the application.  Future versions of SQLite might
+ ** index is out of range.  ^[SQLITE_NOMEM] is returned if malloc() fails.
- ** panic rather than return SQLITE_MISUSE.
  **
  ** See also: [sqlite3_bind_parameter_count()],
- ** [sqlite3_bind_parameter_name()], and
+ ** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()].
- ** [sqlite3_bind_parameter_index()].
+ */
- **
+ SQLITE_API int sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
- ** INVARIANTS:
+ SQLITE_API int sqlite3_bind_double(sqlite3_stmt*, int, double);
- **
+ SQLITE_API int sqlite3_bind_int(sqlite3_stmt*, int, int);
- ** {F13506} The [sqlite3_prepare | SQL statement compiler] recognizes
+ SQLITE_API int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
- **          tokens of the forms "?", "?NNN", "$VVV", ":VVV", and "@VVV"
+ SQLITE_API int sqlite3_bind_null(sqlite3_stmt*, int);
- **          as SQL parameters, where NNN is any sequence of one or more
+ SQLITE_API int sqlite3_bind_text(sqlite3_stmt*, int, const char*, int n, void(*)(void*));
- **          digits and where VVV is any sequence of one or more
+ SQLITE_API int sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
- **          alphanumeric characters or "::" optionally followed by
+ SQLITE_API int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
- **          a string containing no spaces and contained within parentheses.
+ SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
- **
- ** {F13509} The initial value of an SQL parameter is NULL.
- **
- ** {F13512} The index of an "?" SQL parameter is one larger than the
- **          largest index of SQL parameter to the left, or 1 if
- **          the "?" is the leftmost SQL parameter.
- **
- ** {F13515} The index of an "?NNN" SQL parameter is the integer NNN.
- **
- ** {F13518} The index of an ":VVV", "$VVV", or "@VVV" SQL parameter is
- **          the same as the index of leftmost occurances of the same
- **          parameter, or one more than the largest index over all
- **          parameters to the left if this is the first occurrance
- **          of this parameter, or 1 if this is the leftmost parameter.
- **
- ** {F13521} The [sqlite3_prepare | SQL statement compiler] fail with
- **          an [SQLITE_RANGE] error if the index of an SQL parameter
- **          is less than 1 or greater than SQLITE_MAX_VARIABLE_NUMBER.
- **
- ** {F13524} Calls to [sqlite3_bind_text | sqlite3_bind(S,N,V,...)]
- **          associate the value V with all SQL parameters having an
- **          index of N in the [prepared statement] S.
- **
- ** {F13527} Calls to [sqlite3_bind_text | sqlite3_bind(S,N,...)]
- **          override prior calls with the same values of S and N.
- **
- ** {F13530} Bindings established by [sqlite3_bind_text | sqlite3_bind(S,...)]
- **          persist across calls to [sqlite3_reset(S)].
- **
- ** {F13533} In calls to [sqlite3_bind_blob(S,N,V,L,D)],
- **          [sqlite3_bind_text(S,N,V,L,D)], or
- **          [sqlite3_bind_text16(S,N,V,L,D)] SQLite binds the first L
- **          bytes of the blob or string pointed to by V, when L
- **          is non-negative.
- **
- ** {F13536} In calls to [sqlite3_bind_text(S,N,V,L,D)] or
- **          [sqlite3_bind_text16(S,N,V,L,D)] SQLite binds characters
- **          from V through the first zero character when L is negative.
- **
- ** {F13539} In calls to [sqlite3_bind_blob(S,N,V,L,D)],
- **          [sqlite3_bind_text(S,N,V,L,D)], or
- **          [sqlite3_bind_text16(S,N,V,L,D)] when D is the special
- **          constant [SQLITE_STATIC], SQLite assumes that the value V
- **          is held in static unmanaged space that will not change
- **          during the lifetime of the binding.
- **
- ** {F13542} In calls to [sqlite3_bind_blob(S,N,V,L,D)],
- **          [sqlite3_bind_text(S,N,V,L,D)], or
- **          [sqlite3_bind_text16(S,N,V,L,D)] when D is the special
- **          constant [SQLITE_TRANSIENT], the routine makes a
- **          private copy of V value before it returns.
- **
- ** {F13545} In calls to [sqlite3_bind_blob(S,N,V,L,D)],
- **          [sqlite3_bind_text(S,N,V,L,D)], or
- **          [sqlite3_bind_text16(S,N,V,L,D)] when D is a pointer to
- **          a function, SQLite invokes that function to destroy the
- **          V value after it has finished using the V value.
- **
- ** {F13548} In calls to [sqlite3_bind_zeroblob(S,N,V,L)] the value bound
- **          is a blob of L bytes, or a zero-length blob if L is negative.
- */
- int sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
- int sqlite3_bind_double(sqlite3_stmt*, int, double);
- int sqlite3_bind_int(sqlite3_stmt*, int, int);
- int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
- int sqlite3_bind_null(sqlite3_stmt*, int);
- int sqlite3_bind_text(sqlite3_stmt*, int, const char*, int n, void(*)(void*));
- int sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
- int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
- int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
  /*
- ** CAPI3REF: Number Of SQL Parameters {F13600}
+ ** CAPI3REF: Number Of SQL Parameters
  **
- ** This routine can be used to find the number of SQL parameters
+ ** ^This routine can be used to find the number of [SQL parameters]
- ** in a prepared statement.  SQL parameters are tokens of the
+ ** in a [prepared statement].  SQL parameters are tokens of the
  ** form "?", "?NNN", ":AAA", "$AAA", or "@AAA" that serve as
- ** place-holders for values that are [sqlite3_bind_blob | bound]
+ ** placeholders for values that are [sqlite3_bind_blob | bound]
  ** to the parameters at a later time.
  **
- ** This routine actually returns the index of the largest parameter.
+ ** ^(This routine actually returns the index of the largest (rightmost)
- ** For all forms except ?NNN, this will correspond to the number of
+ ** parameter. For all forms except ?NNN, this will correspond to the
- ** unique parameters.  If parameters of the ?NNN are used, there may
+ ** number of unique parameters.  If parameters of the ?NNN form are used,
- ** be gaps in the list.
+ ** there may be gaps in the list.)^
  **
  ** See also: [sqlite3_bind_blob|sqlite3_bind()],
  ** [sqlite3_bind_parameter_name()], and
  ** [sqlite3_bind_parameter_index()].
- **
- ** INVARIANTS:
- **
- ** {F13601} The [sqlite3_bind_parameter_count(S)] interface returns
- **          the largest index of all SQL parameters in the
- **          [prepared statement] S, or 0 if S
- **          contains no SQL parameters.
  */
- int sqlite3_bind_parameter_count(sqlite3_stmt*);
+ SQLITE_API int sqlite3_bind_parameter_count(sqlite3_stmt*);
  /*
- ** CAPI3REF: Name Of A Host Parameter {F13620}
+ ** CAPI3REF: Name Of A Host Parameter
- **
- ** This routine returns a pointer to the name of the n-th
- ** SQL parameter in a [prepared statement].
- ** SQL parameters of the form ":AAA" or "@AAA" or "$AAA" have a name
- ** which is the string ":AAA" or "@AAA" or "$VVV".
- ** In other words, the initial ":" or "$" or "@"
- ** is included as part of the name.
- ** Parameters of the form "?" or "?NNN" have no name.
- **
- ** The first host parameter has an index of 1, not 0.
  **
- ** If the value n is out of range or if the n-th parameter is
+ ** ^The sqlite3_bind_parameter_name(P,N) interface returns
- ** nameless, then NULL is returned.  The returned string is
+ ** the name of the N-th [SQL parameter] in the [prepared statement] P.
- ** always in the UTF-8 encoding even if the named parameter was
+ ** ^(SQL parameters of the form "?NNN" or ":AAA" or "@AAA" or "$AAA"
+ ** have a name which is the string "?NNN" or ":AAA" or "@AAA" or "$AAA"
+ ** respectively.
+ ** In other words, the initial ":" or "$" or "@" or "?"
+ ** is included as part of the name.)^
+ ** ^Parameters of the form "?" without a following integer have no name
+ ** and are referred to as "nameless" or "anonymous parameters".
+ **
+ ** ^The first host parameter has an index of 1, not 0.
+ **
+ ** ^If the value N is out of range or if the N-th parameter is
+ ** nameless, then NULL is returned.  ^The returned string is
+ ** always in UTF-8 encoding even if the named parameter was
  ** originally specified as UTF-16 in [sqlite3_prepare16()] or
  ** [sqlite3_prepare16_v2()].
  **
  ** See also: [sqlite3_bind_blob|sqlite3_bind()],
  ** [sqlite3_bind_parameter_count()], and
  ** [sqlite3_bind_parameter_index()].
- **
- ** INVARIANTS:
- **
- ** {F13621} The [sqlite3_bind_parameter_name(S,N)] interface returns
- **          a UTF-8 rendering of the name of the SQL parameter in
- **          [prepared statement] S having index N, or
- **          NULL if there is no SQL parameter with index N or if the
- **          parameter with index N is an anonymous parameter "?" or
- **          a numbered parameter "?NNN".
  */
- const char *sqlite3_bind_parameter_name(sqlite3_stmt*, int);
+ SQLITE_API const char *sqlite3_bind_parameter_name(sqlite3_stmt*, int);
  /*
- ** CAPI3REF: Index Of A Parameter With A Given Name {F13640}
+ ** CAPI3REF: Index Of A Parameter With A Given Name
  **
- ** Return the index of an SQL parameter given its name.  The
+ ** ^Return the index of an SQL parameter given its name.  ^The
  ** index value returned is suitable for use as the second
- ** parameter to [sqlite3_bind_blob|sqlite3_bind()].  A zero
+ ** parameter to [sqlite3_bind_blob|sqlite3_bind()].  ^A zero
- ** is returned if no matching parameter is found.  The parameter
+ ** is returned if no matching parameter is found.  ^The parameter
  ** name must be given in UTF-8 even if the original statement
  ** was prepared from UTF-16 text using [sqlite3_prepare16_v2()].
  **
  ** See also: [sqlite3_bind_blob|sqlite3_bind()],
  ** [sqlite3_bind_parameter_count()], and
  ** [sqlite3_bind_parameter_index()].
- **
- ** INVARIANTS:
- **
- ** {F13641} The [sqlite3_bind_parameter_index(S,N)] interface returns
- **          the index of SQL parameter in [prepared statement]
- **          S whose name matches the UTF-8 string N, or 0 if there is
- **          no match.
  */
- int sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
+ SQLITE_API int sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
  /*
- ** CAPI3REF: Reset All Bindings On A Prepared Statement {F13660}
+ ** CAPI3REF: Reset All Bindings On A Prepared Statement
  **
- ** Contrary to the intuition of many, [sqlite3_reset()] does not
+ ** ^Contrary to the intuition of many, [sqlite3_reset()] does not reset
- ** reset the [sqlite3_bind_blob | bindings] on a
+ ** the [sqlite3_bind_blob | bindings] on a [prepared statement].
- ** [prepared statement].  Use this routine to
+ ** ^Use this routine to reset all host parameters to NULL.
- ** reset all host parameters to NULL.
- **
- ** INVARIANTS:
- **
- ** {F13661} The [sqlite3_clear_bindings(S)] interface resets all
- **          SQL parameter bindings in [prepared statement] S
- **          back to NULL.
  */
- int sqlite3_clear_bindings(sqlite3_stmt*);
+ SQLITE_API int sqlite3_clear_bindings(sqlite3_stmt*);
  /*
- ** CAPI3REF: Number Of Columns In A Result Set {F13710}
+ ** CAPI3REF: Number Of Columns In A Result Set
- **
- ** Return the number of columns in the result set returned by the
- ** [prepared statement]. This routine returns 0
- ** if pStmt is an SQL statement that does not return data (for
- ** example an UPDATE).
  **
- ** INVARIANTS:
+ ** ^Return the number of columns in the result set returned by the
+ ** [prepared statement]. ^This routine returns 0 if pStmt is an SQL
+ ** statement that does not return data (for example an [UPDATE]).
  **
- ** {F13711} The [sqlite3_column_count(S)] interface returns the number of
+ ** See also: [sqlite3_data_count()]
- **          columns in the result set generated by the
- **          [prepared statement] S, or 0 if S does not generate
- **          a result set.
  */
- int sqlite3_column_count(sqlite3_stmt *pStmt);
+ SQLITE_API int sqlite3_column_count(sqlite3_stmt *pStmt);
  /*
- ** CAPI3REF: Column Names In A Result Set {F13720}
+ ** CAPI3REF: Column Names In A Result Set
  **
- ** These routines return the name assigned to a particular column
+ ** ^These routines return the name assigned to a particular column
- ** in the result set of a SELECT statement.  The sqlite3_column_name()
+ ** in the result set of a [SELECT] statement.  ^The sqlite3_column_name()
- ** interface returns a pointer to a zero-terminated UTF8 string
+ ** interface returns a pointer to a zero-terminated UTF-8 string
  ** and sqlite3_column_name16() returns a pointer to a zero-terminated
- ** UTF16 string.  The first parameter is the
+ ** UTF-16 string.  ^The first parameter is the [prepared statement]
- ** [prepared statement] that implements the SELECT statement.
+ ** that implements the [SELECT] statement. ^The second parameter is the
- ** The second parameter is the column number.  The left-most column is
+ ** column number.  ^The leftmost column is number 0.
- ** number 0.
+ **
- **
+ ** ^The returned string pointer is valid until either the [prepared statement]
- ** The returned string pointer is valid until either the
+ ** is destroyed by [sqlite3_finalize()] or until the statement is automatically
- ** [prepared statement] is destroyed by [sqlite3_finalize()]
+ ** reprepared by the first call to [sqlite3_step()] for a particular run
- ** or until the next call sqlite3_column_name() or sqlite3_column_name16()
+ ** or until the next call to
- ** on the same column.
+ ** sqlite3_column_name() or sqlite3_column_name16() on the same column.
  **
- ** If sqlite3_malloc() fails during the processing of either routine
+ ** ^If sqlite3_malloc() fails during the processing of either routine
  ** (for example during a conversion from UTF-8 to UTF-16) then a
  ** NULL pointer is returned.
  **
- ** The name of a result column is the value of the "AS" clause for
+ ** ^The name of a result column is the value of the "AS" clause for
  ** that column, if there is an AS clause.  If there is no AS clause
  ** then the name of the column is unspecified and may change from
  ** one release of SQLite to the next.
- **
- ** INVARIANTS:
- **
- ** {F13721} A successful invocation of the [sqlite3_column_name(S,N)]
- **          interface returns the name
- **          of the Nth column (where 0 is the left-most column) for the
- **          result set of [prepared statement] S as a
- **          zero-terminated UTF-8 string.
- **
- ** {F13723} A successful invocation of the [sqlite3_column_name16(S,N)]
- **          interface returns the name
- **          of the Nth column (where 0 is the left-most column) for the
- **          result set of [prepared statement] S as a
- **          zero-terminated UTF-16 string in the native byte order.
- **
- ** {F13724} The [sqlite3_column_name()] and [sqlite3_column_name16()]
- **          interfaces return a NULL pointer if they are unable to
- **          allocate memory memory to hold there normal return strings.
- **
- ** {F13725} If the N parameter to [sqlite3_column_name(S,N)] or
- **          [sqlite3_column_name16(S,N)] is out of range, then the
- **          interfaces returns a NULL pointer.
- **
- ** {F13726} The strings returned by [sqlite3_column_name(S,N)] and
- **          [sqlite3_column_name16(S,N)] are valid until the next
- **          call to either routine with the same S and N parameters
- **          or until [sqlite3_finalize(S)] is called.
- **
- ** {F13727} When a result column of a [SELECT] statement contains
- **          an AS clause, the name of that column is the indentifier
- **          to the right of the AS keyword.
  */
- const char *sqlite3_column_name(sqlite3_stmt*, int N);
+ SQLITE_API const char *sqlite3_column_name(sqlite3_stmt*, int N);
- const void *sqlite3_column_name16(sqlite3_stmt*, int N);
+ SQLITE_API const void *sqlite3_column_name16(sqlite3_stmt*, int N);
  /*
- ** CAPI3REF: Source Of Data In A Query Result {F13740}
+ ** CAPI3REF: Source Of Data In A Query Result
  **
- ** These routines provide a means to determine what column of what
+ ** ^These routines provide a means to determine the database, table, and
- ** table in which database a result of a SELECT statement comes from.
+ ** table column that is the origin of a particular result column in
- ** The name of the database or table or column can be returned as
+ ** [SELECT] statement.
- ** either a UTF8 or UTF16 string.  The _database_ routines return
+ ** ^The name of the database or table or column can be returned as
+ ** either a UTF-8 or UTF-16 string.  ^The _database_ routines return
  ** the database name, the _table_ routines return the table name, and
  ** the origin_ routines return the column name.
- ** The returned string is valid until
+ ** ^The returned string is valid until the [prepared statement] is destroyed
- ** the [prepared statement] is destroyed using
+ ** using [sqlite3_finalize()] or until the statement is automatically
- ** [sqlite3_finalize()] or until the same information is requested
+ ** reprepared by the first call to [sqlite3_step()] for a particular run
+ ** or until the same information is requested
  ** again in a different encoding.
  **
- ** The names returned are the original un-aliased names of the
+ ** ^The names returned are the original un-aliased names of the
  ** database, table, and column.
  **
- ** The first argument to the following calls is a [prepared statement].
+ ** ^The first argument to these interfaces is a [prepared statement].
- ** These functions return information about the Nth column returned by
+ ** ^These functions return information about the Nth result column returned by
  ** the statement, where N is the second function argument.
+ ** ^The left-most column is column 0 for these routines.
  **
- ** If the Nth column returned by the statement is an expression
+ ** ^If the Nth column returned by the statement is an expression or
- ** or subquery and is not a column value, then all of these functions
+ ** subquery and is not a column value, then all of these functions return
- ** return NULL.  These routine might also return NULL if a memory
+ ** NULL.  ^These routine might also return NULL if a memory allocation error
- ** allocation error occurs.  Otherwise, they return the
+ ** occurs.  ^Otherwise, they return the name of the attached database, table,
- ** name of the attached database, table and column that query result
+ ** or column that query result column was extracted from.
- ** column was extracted from.
  **
- ** As with all other SQLite APIs, those postfixed with "16" return
+ ** ^As with all other SQLite APIs, those whose names end with "16" return
- ** UTF-16 encoded strings, the other functions return UTF-8. {END}
+ ** UTF-16 encoded strings and the other functions return UTF-8.
  **
- ** These APIs are only available if the library was compiled with the
+ ** ^These APIs are only available if the library was compiled with the
- ** SQLITE_ENABLE_COLUMN_METADATA preprocessor symbol defined.
+ ** [SQLITE_ENABLE_COLUMN_METADATA] C-preprocessor symbol.
  **
- ** {U13751}
  ** If two or more threads call one or more of these routines against the same
  ** prepared statement and column at the same time then the results are
  ** undefined.
  **
- ** INVARIANTS:
+ ** If two or more threads call one or more
- **
+ ** [sqlite3_column_database_name | column metadata interfaces]
- ** {F13741} The [sqlite3_column_database_name(S,N)] interface returns either
+ ** for the same [prepared statement] and result column
- **          the UTF-8 zero-terminated name of the database from which the
+ ** at the same time then the results are undefined.
- **          Nth result column of [prepared statement] S
+ */
- **          is extracted, or NULL if the the Nth column of S is a
+ SQLITE_API const char *sqlite3_column_database_name(sqlite3_stmt*,int);
- **          general expression or if unable to allocate memory
+ SQLITE_API const void *sqlite3_column_database_name16(sqlite3_stmt*,int);
- **          to store the name.
+ SQLITE_API const char *sqlite3_column_table_name(sqlite3_stmt*,int);
- **
+ SQLITE_API const void *sqlite3_column_table_name16(sqlite3_stmt*,int);
- ** {F13742} The [sqlite3_column_database_name16(S,N)] interface returns either
+ SQLITE_API const char *sqlite3_column_origin_name(sqlite3_stmt*,int);
- **          the UTF-16 native byte order
+ SQLITE_API const void *sqlite3_column_origin_name16(sqlite3_stmt*,int);
- **          zero-terminated name of the database from which the
- **          Nth result column of [prepared statement] S
+ /*
- **          is extracted, or NULL if the the Nth column of S is a
+ ** CAPI3REF: Declared Datatype Of A Query Result
- **          general expression or if unable to allocate memory
+ **
- **          to store the name.
+ ** ^(The first parameter is a [prepared statement].
- **
+ ** If this statement is a [SELECT] statement and the Nth column of the
- ** {F13743} The [sqlite3_column_table_name(S,N)] interface returns either
+ ** returned result set of that [SELECT] is a table column (not an
- **          the UTF-8 zero-terminated name of the table from which the
- **          Nth result column of [prepared statement] S
- **          is extracted, or NULL if the the Nth column of S is a
- **          general expression or if unable to allocate memory
- **          to store the name.
- **
- ** {F13744} The [sqlite3_column_table_name16(S,N)] interface returns either
- **          the UTF-16 native byte order
- **          zero-terminated name of the table from which the
- **          Nth result column of [prepared statement] S
- **          is extracted, or NULL if the the Nth column of S is a
- **          general expression or if unable to allocate memory
- **          to store the name.
- **
- ** {F13745} The [sqlite3_column_origin_name(S,N)] interface returns either
- **          the UTF-8 zero-terminated name of the table column from which the
- **          Nth result column of [prepared statement] S
- **          is extracted, or NULL if the the Nth column of S is a
- **          general expression or if unable to allocate memory
- **          to store the name.
- **
- ** {F13746} The [sqlite3_column_origin_name16(S,N)] interface returns either
- **          the UTF-16 native byte order
- **          zero-terminated name of the table column from which the
- **          Nth result column of [prepared statement] S
- **          is extracted, or NULL if the the Nth column of S is a
- **          general expression or if unable to allocate memory
- **          to store the name.
- **
- ** {F13748} The return values from
- **          [sqlite3_column_database_name|column metadata interfaces]
- **          are valid
- **          for the lifetime of the [prepared statement]
- **          or until the encoding is changed by another metadata
- **          interface call for the same prepared statement and column.
- **
- ** LIMITATIONS:
- **
- ** {U13751} If two or more threads call one or more
- **          [sqlite3_column_database_name|column metadata interfaces]
- **          the same [prepared statement] and result column
- **          at the same time then the results are undefined.
- */
- const char *sqlite3_column_database_name(sqlite3_stmt*,int);
- const void *sqlite3_column_database_name16(sqlite3_stmt*,int);
- const char *sqlite3_column_table_name(sqlite3_stmt*,int);
- const void *sqlite3_column_table_name16(sqlite3_stmt*,int);
- const char *sqlite3_column_origin_name(sqlite3_stmt*,int);
- const void *sqlite3_column_origin_name16(sqlite3_stmt*,int);
- /*
- ** CAPI3REF: Declared Datatype Of A Query Result {F13760}
- **
- ** The first parameter is a [prepared statement].
- ** If this statement is a SELECT statement and the Nth column of the
- ** returned result set of that SELECT is a table column (not an
  ** expression or subquery) then the declared type of the table
- ** column is returned.  If the Nth column of the result set is an
+ ** column is returned.)^  ^If the Nth column of the result set is an
  ** expression or subquery, then a NULL pointer is returned.
- ** The returned string is always UTF-8 encoded.  {END}
+ ** ^The returned string is always UTF-8 encoded.
- ** For example, in the database schema:
+ **
+ ** ^(For example, given the database schema:
  **
  ** CREATE TABLE t1(c1 VARIANT);
  **
- ** And the following statement compiled:
+ ** and the following statement to be compiled:
  **
  ** SELECT c1 + 1, c1 FROM t1;
  **
- ** Then this routine would return the string "VARIANT" for the second
+ ** this routine would return the string "VARIANT" for the second result
- ** result column (i==1), and a NULL pointer for the first result column
+ ** column (i==1), and a NULL pointer for the first result column (i==0).)^
- ** (i==0).
  **
- ** SQLite uses dynamic run-time typing.  So just because a column
+ ** ^SQLite uses dynamic run-time typing.  ^So just because a column
  ** is declared to contain a particular type does not mean that the
  ** data stored in that column is of the declared type.  SQLite is
- ** strongly typed, but the typing is dynamic not static.  Type
+ ** strongly typed, but the typing is dynamic not static.  ^Type
  ** is associated with individual values, not with the containers
  ** used to hold those values.
+ */
+ SQLITE_API const char *sqlite3_column_decltype(sqlite3_stmt*,int);
+ SQLITE_API const void *sqlite3_column_decltype16(sqlite3_stmt*,int);
+ /*
+ ** CAPI3REF: Evaluate An SQL Statement
  **
- ** INVARIANTS:
+ ** After a [prepared statement] has been prepared using either
- **
+ ** [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] or one of the legacy
- ** {F13761}  A successful call to [sqlite3_column_decltype(S,N)]
+ ** interfaces [sqlite3_prepare()] or [sqlite3_prepare16()], this function
- **           returns a zero-terminated UTF-8 string containing the
+ ** must be called one or more times to evaluate the statement.
- **           the declared datatype of the table column that appears
- **           as the Nth column (numbered from 0) of the result set to the
- **           [prepared statement] S.
- **
- ** {F13762}  A successful call to [sqlite3_column_decltype16(S,N)]
- **           returns a zero-terminated UTF-16 native byte order string
- **           containing the declared datatype of the table column that appears
- **           as the Nth column (numbered from 0) of the result set to the
- **           [prepared statement] S.
- **
- ** {F13763}  If N is less than 0 or N is greater than or equal to
- **           the number of columns in [prepared statement] S
- **           or if the Nth column of S is an expression or subquery rather
- **           than a table column or if a memory allocation failure
- **           occurs during encoding conversions, then
- **           calls to [sqlite3_column_decltype(S,N)] or
- **           [sqlite3_column_decltype16(S,N)] return NULL.
- */
- const char *sqlite3_column_decltype(sqlite3_stmt*,int);
- const void *sqlite3_column_decltype16(sqlite3_stmt*,int);
- /*
- ** CAPI3REF:  Evaluate An SQL Statement {F13200}
- **
- ** After an [prepared statement] has been prepared with a call
- ** to either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] or to one of
- ** the legacy interfaces [sqlite3_prepare()] or [sqlite3_prepare16()],
- ** then this function must be called one or more times to evaluate the
- ** statement.
  **
- ** The details of the behavior of this sqlite3_step() interface depend
+ ** The details of the behavior of the sqlite3_step() interface depend
  ** on whether the statement was prepared using the newer "v2" interface
  ** [sqlite3_prepare_v2()] and [sqlite3_prepare16_v2()] or the older legacy
  ** interface [sqlite3_prepare()] and [sqlite3_prepare16()].  The use of the
  ** new "v2" interface is recommended for new applications but the legacy
  ** interface will continue to be supported.
  **
- ** In the lagacy interface, the return value will be either [SQLITE_BUSY],
+ ** ^In the legacy interface, the return value will be either [SQLITE_BUSY],
  ** [SQLITE_DONE], [SQLITE_ROW], [SQLITE_ERROR], or [SQLITE_MISUSE].
- ** With the "v2" interface, any of the other [SQLITE_OK | result code]
+ ** ^With the "v2" interface, any of the other [result codes] or
- ** or [SQLITE_IOERR_READ | extended result code] might be returned as
+ ** [extended result codes] might be returned as well.
- ** well.
  **
- ** [SQLITE_BUSY] means that the database engine was unable to acquire the
+ ** ^[SQLITE_BUSY] means that the database engine was unable to acquire the
- ** database locks it needs to do its job.  If the statement is a COMMIT
+ ** database locks it needs to do its job.  ^If the statement is a [COMMIT]
  ** or occurs outside of an explicit transaction, then you can retry the
- ** statement.  If the statement is not a COMMIT and occurs within a
+ ** statement.  If the statement is not a [COMMIT] and occurs within an
  ** explicit transaction then you should rollback the transaction before
  ** continuing.
  **
- ** [SQLITE_DONE] means that the statement has finished executing
+ ** ^[SQLITE_DONE] means that the statement has finished executing
  ** successfully.  sqlite3_step() should not be called again on this virtual
  ** machine without first calling [sqlite3_reset()] to reset the virtual
  ** machine back to its initial state.
  **
- ** If the SQL statement being executed returns any data, then
+ ** ^If the SQL statement being executed returns any data, then [SQLITE_ROW]
- ** [SQLITE_ROW] is returned each time a new row of data is ready
+ ** is returned each time a new row of data is ready for processing by the
- ** for processing by the caller. The values may be accessed using
+ ** caller. The values may be accessed using the [column access functions].
- ** the [sqlite3_column_int | column access functions].
  ** sqlite3_step() is called again to retrieve the next row of data.
  **
- ** [SQLITE_ERROR] means that a run-time error (such as a constraint
+ ** ^[SQLITE_ERROR] means that a run-time error (such as a constraint
  ** violation) has occurred.  sqlite3_step() should not be called again on
  ** the VM. More information may be found by calling [sqlite3_errmsg()].
- ** With the legacy interface, a more specific error code (example:
+ ** ^With the legacy interface, a more specific error code (for example,
  ** [SQLITE_INTERRUPT], [SQLITE_SCHEMA], [SQLITE_CORRUPT], and so forth)
  ** can be obtained by calling [sqlite3_reset()] on the
- ** [prepared statement].  In the "v2" interface,
+ ** [prepared statement].  ^In the "v2" interface,
  ** the more specific error code is returned directly by sqlite3_step().
  **
  ** [SQLITE_MISUSE] means that the this routine was called inappropriately.
  ** Perhaps it was called on a [prepared statement] that has
  ** already been [sqlite3_finalize | finalized] or on one that had
  ** previously returned [SQLITE_ERROR] or [SQLITE_DONE].  Or it could
  ** be the case that the same database connection is being used by two or
  ** more threads at the same moment in time.
  **
- ** <b>Goofy Interface Alert:</b>
+ ** For all versions of SQLite up to and including 3.6.23.1, a call to
- ** In the legacy interface,
+ ** [sqlite3_reset()] was required after sqlite3_step() returned anything
- ** the sqlite3_step() API always returns a generic error code,
+ ** other than [SQLITE_ROW] before any subsequent invocation of
- ** [SQLITE_ERROR], following any error other than [SQLITE_BUSY]
+ ** sqlite3_step().  Failure to reset the prepared statement using
- ** and [SQLITE_MISUSE].  You must call [sqlite3_reset()] or
+ ** [sqlite3_reset()] would result in an [SQLITE_MISUSE] return from
- ** [sqlite3_finalize()] in order to find one of the specific
+ ** sqlite3_step().  But after version 3.6.23.1, sqlite3_step() began
- ** [error codes] that better describes the error.
+ ** calling [sqlite3_reset()] automatically in this circumstance rather
+ ** than returning [SQLITE_MISUSE].  This is not considered a compatibility
+ ** break because any application that ever receives an SQLITE_MISUSE error
+ ** is broken by definition.  The [SQLITE_OMIT_AUTORESET] compile-time option
+ ** can be used to restore the legacy behavior.
+ **
+ ** <b>Goofy Interface Alert:</b> In the legacy interface, the sqlite3_step()
+ ** API always returns a generic error code, [SQLITE_ERROR], following any
+ ** error other than [SQLITE_BUSY] and [SQLITE_MISUSE].  You must call
+ ** [sqlite3_reset()] or [sqlite3_finalize()] in order to find one of the
+ ** specific [error codes] that better describes the error.
  ** We admit that this is a goofy design.  The problem has been fixed
  ** with the "v2" interface.  If you prepare all of your SQL statements
  ** using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] instead
- ** of the legacy [sqlite3_prepare()] and [sqlite3_prepare16()], then the
+ ** of the legacy [sqlite3_prepare()] and [sqlite3_prepare16()] interfaces,
- ** more specific [error codes] are returned directly
+ ** then the more specific [error codes] are returned directly
  ** by sqlite3_step().  The use of the "v2" interface is recommended.
- **
- ** INVARIANTS:
- **
- ** {F13202}  If [prepared statement] S is ready to be
- **           run, then [sqlite3_step(S)] advances that prepared statement
- **           until to completion or until it is ready to return another
- **           row of the result set or an interrupt or run-time error occurs.
- **
- ** {F15304}  When a call to [sqlite3_step(S)] causes the
- **           [prepared statement] S to run to completion,
- **           the function returns [SQLITE_DONE].
- **
- ** {F15306}  When a call to [sqlite3_step(S)] stops because it is ready
- **           to return another row of the result set, it returns
- **           [SQLITE_ROW].
- **
- ** {F15308}  If a call to [sqlite3_step(S)] encounters an
- **           [sqlite3_interrupt|interrupt] or a run-time error,
- **           it returns an appropraite error code that is not one of
- **           [SQLITE_OK], [SQLITE_ROW], or [SQLITE_DONE].
- **
- ** {F15310}  If an [sqlite3_interrupt|interrupt] or run-time error
- **           occurs during a call to [sqlite3_step(S)]
- **           for a [prepared statement] S created using
- **           legacy interfaces [sqlite3_prepare()] or
- **           [sqlite3_prepare16()] then the function returns either
- **           [SQLITE_ERROR], [SQLITE_BUSY], or [SQLITE_MISUSE].
  */
- int sqlite3_step(sqlite3_stmt*);
+ SQLITE_API int sqlite3_step(sqlite3_stmt*);
  /*
- ** CAPI3REF: Number of columns in a result set {F13770}
+ ** CAPI3REF: Number of columns in a result set
- **
- ** Return the number of values in the current row of the result set.
  **
- ** INVARIANTS:
+ ** ^The sqlite3_data_count(P) interface returns the number of columns in the
+ ** current row of the result set of [prepared statement] P.
+ ** ^If prepared statement P does not have results ready to return
+ ** (via calls to the [sqlite3_column_int | sqlite3_column_*()] of
+ ** interfaces) then sqlite3_data_count(P) returns 0.
+ ** ^The sqlite3_data_count(P) routine also returns 0 if P is a NULL pointer.
+ ** ^The sqlite3_data_count(P) routine returns 0 if the previous call to
+ ** [sqlite3_step](P) returned [SQLITE_DONE].  ^The sqlite3_data_count(P)
+ ** will return non-zero if previous call to [sqlite3_step](P) returned
+ ** [SQLITE_ROW], except in the case of the [PRAGMA incremental_vacuum]
+ ** where it always returns zero since each step of that multi-step
+ ** pragma returns 0 columns of data.
  **
- ** {F13771}  After a call to [sqlite3_step(S)] that returns
+ ** See also: [sqlite3_column_count()]
- **           [SQLITE_ROW], the [sqlite3_data_count(S)] routine
- **           will return the same value as the
- **           [sqlite3_column_count(S)] function.
- **
- ** {F13772}  After [sqlite3_step(S)] has returned any value other than
- **           [SQLITE_ROW] or before [sqlite3_step(S)] has been
- **           called on the [prepared statement] for
- **           the first time since it was [sqlite3_prepare|prepared]
- **           or [sqlite3_reset|reset], the [sqlite3_data_count(S)]
- **           routine returns zero.
  */
- int sqlite3_data_count(sqlite3_stmt *pStmt);
+ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
  /*
- ** CAPI3REF: Fundamental Datatypes {F10265}
+ ** CAPI3REF: Fundamental Datatypes
  ** KEYWORDS: SQLITE_TEXT
  **
- ** {F10266}Every value in SQLite has one of five fundamental datatypes:
+ ** ^(Every value in SQLite has one of five fundamental datatypes:
  **
  ** <ul>
  ** <li> 64-bit signed integer
- Line 2942  int sqlite3_data_count(sqlite3_stmt *pSt
+ Line 3656  int sqlite3_data_count(sqlite3_stmt *pSt
  ** <li> string
  ** <li> BLOB
  ** <li> NULL
- ** </ul> {END}
+ ** </ul>)^
  **
  ** These constants are codes for each of those types.
  **
  ** Note that the SQLITE_TEXT constant was also used in SQLite version 2
  ** for a completely different meaning.  Software that links against both
- ** SQLite version 2 and SQLite version 3 should use SQLITE3_TEXT not
+ ** SQLite version 2 and SQLite version 3 should use SQLITE3_TEXT, not
  ** SQLITE_TEXT.
  */
  #define SQLITE_INTEGER  1
- Line 2963  int sqlite3_data_count(sqlite3_stmt *pSt
+ Line 3677  int sqlite3_data_count(sqlite3_stmt *pSt
  #define SQLITE3_TEXT     3
  /*
- ** CAPI3REF: Results Values From A Query {F13800}
+ ** CAPI3REF: Result Values From A Query
+ ** KEYWORDS: {column access functions}
  **
- ** These routines form the "result set query" interface.
+ ** These routines form the "result set" interface.
  **
- ** These routines return information about
+ ** ^These routines return information about a single column of the current
- ** a single column of the current result row of a query.  In every
+ ** result row of a query.  ^In every case the first argument is a pointer
- ** case the first argument is a pointer to the
+ ** to the [prepared statement] that is being evaluated (the [sqlite3_stmt*]
- ** [prepared statement] that is being
+ ** that was returned from [sqlite3_prepare_v2()] or one of its variants)
- ** evaluated (the [sqlite3_stmt*] that was returned from
+ ** and the second argument is the index of the column for which information
- ** [sqlite3_prepare_v2()] or one of its variants) and
+ ** should be returned. ^The leftmost column of the result set has the index 0.
- ** the second argument is the index of the column for which information
+ ** ^The number of columns in the result can be determined using
- ** should be returned.  The left-most column of the result set
+ ** [sqlite3_column_count()].
- ** has an index of 0.
  **
- ** If the SQL statement is not currently point to a valid row, or if the
+ ** If the SQL statement does not currently point to a valid row, or if the
- ** the column index is out of range, the result is undefined.
+ ** column index is out of range, the result is undefined.
  ** These routines may only be called when the most recent call to
  ** [sqlite3_step()] has returned [SQLITE_ROW] and neither
- ** [sqlite3_reset()] nor [sqlite3_finalize()] has been call subsequently.
+ ** [sqlite3_reset()] nor [sqlite3_finalize()] have been called subsequently.
  ** If any of these routines are called after [sqlite3_reset()] or
  ** [sqlite3_finalize()] or after [sqlite3_step()] has returned
  ** something other than [SQLITE_ROW], the results are undefined.
  ** If [sqlite3_step()] or [sqlite3_reset()] or [sqlite3_finalize()]
  ** are called from a different thread while any of these routines
  ** are pending, then the results are undefined.
  **
- ** The sqlite3_column_type() routine returns
+ ** ^The sqlite3_column_type() routine returns the
  ** [SQLITE_INTEGER | datatype code] for the initial data type
- ** of the result column.  The returned value is one of [SQLITE_INTEGER],
+ ** of the result column.  ^The returned value is one of [SQLITE_INTEGER],
  ** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL].  The value
  ** returned by sqlite3_column_type() is only meaningful if no type
  ** conversions have occurred as described below.  After a type conversion,
- Line 2999  int sqlite3_data_count(sqlite3_stmt *pSt
+ Line 3713  int sqlite3_data_count(sqlite3_stmt *pSt
  ** versions of SQLite may change the behavior of sqlite3_column_type()
  ** following a type conversion.
  **
- ** If the result is a BLOB or UTF-8 string then the sqlite3_column_bytes()
+ ** ^If the result is a BLOB or UTF-8 string then the sqlite3_column_bytes()
  ** routine returns the number of bytes in that BLOB or string.
- ** If the result is a UTF-16 string, then sqlite3_column_bytes() converts
+ ** ^If the result is a UTF-16 string, then sqlite3_column_bytes() converts
  ** the string to UTF-8 and then returns the number of bytes.
- ** If the result is a numeric value then sqlite3_column_bytes() uses
+ ** ^If the result is a numeric value then sqlite3_column_bytes() uses
  ** [sqlite3_snprintf()] to convert that value to a UTF-8 string and returns
  ** the number of bytes in that string.
- ** The value returned does not include the zero terminator at the end
+ ** ^If the result is NULL, then sqlite3_column_bytes() returns zero.
- ** of the string.  For clarity: the value returned is the number of
+ **
+ ** ^If the result is a BLOB or UTF-16 string then the sqlite3_column_bytes16()
+ ** routine returns the number of bytes in that BLOB or string.
+ ** ^If the result is a UTF-8 string, then sqlite3_column_bytes16() converts
+ ** the string to UTF-16 and then returns the number of bytes.
+ ** ^If the result is a numeric value then sqlite3_column_bytes16() uses
+ ** [sqlite3_snprintf()] to convert that value to a UTF-16 string and returns
+ ** the number of bytes in that string.
+ ** ^If the result is NULL, then sqlite3_column_bytes16() returns zero.
+ **
+ ** ^The values returned by [sqlite3_column_bytes()] and
+ ** [sqlite3_column_bytes16()] do not include the zero terminators at the end
+ ** of the string.  ^For clarity: the values returned by
+ ** [sqlite3_column_bytes()] and [sqlite3_column_bytes16()] are the number of
  ** bytes in the string, not the number of characters.
  **
- ** Strings returned by sqlite3_column_text() and sqlite3_column_text16(),
+ ** ^Strings returned by sqlite3_column_text() and sqlite3_column_text16(),
- ** even empty strings, are always zero terminated.  The return
+ ** even empty strings, are always zero-terminated.  ^The return
- ** value from sqlite3_column_blob() for a zero-length blob is an arbitrary
+ ** value from sqlite3_column_blob() for a zero-length BLOB is a NULL pointer.
- ** pointer, possibly even a NULL pointer.
+ **
- **
+ ** ^The object returned by [sqlite3_column_value()] is an
- ** The sqlite3_column_bytes16() routine is similar to sqlite3_column_bytes()
+ ** [unprotected sqlite3_value] object.  An unprotected sqlite3_value object
- ** but leaves the result in UTF-16 in native byte order instead of UTF-8.
+ ** may only be used with [sqlite3_bind_value()] and [sqlite3_result_value()].
- ** The zero terminator is not included in this count.
+ ** If the [unprotected sqlite3_value] object returned by
+ ** [sqlite3_column_value()] is used in any other way, including calls
+ ** to routines like [sqlite3_value_int()], [sqlite3_value_text()],
+ ** or [sqlite3_value_bytes()], then the behavior is undefined.
  **
- ** These routines attempt to convert the value where appropriate.  For
+ ** These routines attempt to convert the value where appropriate.  ^For
  ** example, if the internal representation is FLOAT and a text result
- ** is requested, [sqlite3_snprintf()] is used internally to do the conversion
+ ** is requested, [sqlite3_snprintf()] is used internally to perform the
- ** automatically.  The following table details the conversions that
+ ** conversion automatically.  ^(The following table details the conversions
- ** are applied:
+ ** that are applied:
  **
  ** <blockquote>
  ** <table border="1">
- Line 3035  int sqlite3_data_count(sqlite3_stmt *pSt
+ Line 3765  int sqlite3_data_count(sqlite3_stmt *pSt
  ** <tr><td>  NULL    <td>   BLOB    <td> Result is NULL pointer
  ** <tr><td> INTEGER  <td>  FLOAT    <td> Convert from integer to float
  ** <tr><td> INTEGER  <td>   TEXT    <td> ASCII rendering of the integer
- ** <tr><td> INTEGER  <td>   BLOB    <td> Same as for INTEGER->TEXT
+ ** <tr><td> INTEGER  <td>   BLOB    <td> Same as INTEGER->TEXT
  ** <tr><td>  FLOAT   <td> INTEGER   <td> Convert from float to integer
  ** <tr><td>  FLOAT   <td>   TEXT    <td> ASCII rendering of the float
  ** <tr><td>  FLOAT   <td>   BLOB    <td> Same as FLOAT->TEXT
- Line 3046  int sqlite3_data_count(sqlite3_stmt *pSt
+ Line 3776  int sqlite3_data_count(sqlite3_stmt *pSt
  ** <tr><td>  BLOB    <td>  FLOAT    <td> Convert to TEXT then use atof()
  ** <tr><td>  BLOB    <td>   TEXT    <td> Add a zero terminator if needed
  ** </table>
- ** </blockquote>
+ ** </blockquote>)^
  **
  ** The table above makes reference to standard C library functions atoi()
  ** and atof().  SQLite does not really use these functions.  It has its
- ** on equavalent internal routines.  The atoi() and atof() names are
+ ** own equivalent internal routines.  The atoi() and atof() names are
  ** used in the table for brevity and because they are familiar to most
  ** C programmers.
  **
  ** Note that when type conversions occur, pointers returned by prior
  ** calls to sqlite3_column_blob(), sqlite3_column_text(), and/or
  ** sqlite3_column_text16() may be invalidated.
  ** Type conversions and pointer invalidations might occur
  ** in the following cases:
  **
  ** <ul>
- ** <li><p>  The initial content is a BLOB and sqlite3_column_text()
+ ** <li> The initial content is a BLOB and sqlite3_column_text() or
- **          or sqlite3_column_text16() is called.  A zero-terminator might
+ **      sqlite3_column_text16() is called.  A zero-terminator might
- **          need to be added to the string.</p></li>
+ **      need to be added to the string.</li>
- **
+ ** <li> The initial content is UTF-8 text and sqlite3_column_bytes16() or
- ** <li><p>  The initial content is UTF-8 text and sqlite3_column_bytes16() or
+ **      sqlite3_column_text16() is called.  The content must be converted
- **          sqlite3_column_text16() is called.  The content must be converted
+ **      to UTF-16.</li>
- **          to UTF-16.</p></li>
+ ** <li> The initial content is UTF-16 text and sqlite3_column_bytes() or
- **
+ **      sqlite3_column_text() is called.  The content must be converted
- ** <li><p>  The initial content is UTF-16 text and sqlite3_column_bytes() or
+ **      to UTF-8.</li>
- **          sqlite3_column_text() is called.  The content must be converted
- **          to UTF-8.</p></li>
  ** </ul>
  **
- ** Conversions between UTF-16be and UTF-16le are always done in place and do
+ ** ^Conversions between UTF-16be and UTF-16le are always done in place and do
  ** not invalidate a prior pointer, though of course the content of the buffer
- ** that the prior pointer points to will have been modified.  Other kinds
+ ** that the prior pointer references will have been modified.  Other kinds
- ** of conversion are done in place when it is possible, but sometime it is
+ ** of conversion are done in place when it is possible, but sometimes they
- ** not possible and in those cases prior pointers are invalidated.
+ ** are not possible and in those cases prior pointers are invalidated.
  **
  ** The safest and easiest to remember policy is to invoke these routines
  ** in one of the following ways:
  **
- **  <ul>
+ ** <ul>
  **  <li>sqlite3_column_text() followed by sqlite3_column_bytes()</li>
  **  <li>sqlite3_column_blob() followed by sqlite3_column_bytes()</li>
  **  <li>sqlite3_column_text16() followed by sqlite3_column_bytes16()</li>
- **  </ul>
+ ** </ul>
  **
- ** In other words, you should call sqlite3_column_text(), sqlite3_column_blob(),
+ ** In other words, you should call sqlite3_column_text(),
- ** or sqlite3_column_text16() first to force the result into the desired
+ ** sqlite3_column_blob(), or sqlite3_column_text16() first to force the result
- ** format, then invoke sqlite3_column_bytes() or sqlite3_column_bytes16() to
+ ** into the desired format, then invoke sqlite3_column_bytes() or
- ** find the size of the result.  Do not mix call to sqlite3_column_text() or
+ ** sqlite3_column_bytes16() to find the size of the result.  Do not mix calls
- ** sqlite3_column_blob() with calls to sqlite3_column_bytes16().  And do not
+ ** to sqlite3_column_text() or sqlite3_column_blob() with calls to
- ** mix calls to sqlite3_column_text16() with calls to sqlite3_column_bytes().
+ ** sqlite3_column_bytes16(), and do not mix calls to sqlite3_column_text16()
+ ** with calls to sqlite3_column_bytes().
  **
- ** The pointers returned are valid until a type conversion occurs as
+ ** ^The pointers returned are valid until a type conversion occurs as
  ** described above, or until [sqlite3_step()] or [sqlite3_reset()] or
- ** [sqlite3_finalize()] is called.  The memory space used to hold strings
+ ** [sqlite3_finalize()] is called.  ^The memory space used to hold strings
- ** and blobs is freed automatically.  Do <b>not</b> pass the pointers returned
+ ** and BLOBs is freed automatically.  Do <b>not</b> pass the pointers returned
  ** [sqlite3_column_blob()], [sqlite3_column_text()], etc. into
  ** [sqlite3_free()].
  **
- ** If a memory allocation error occurs during the evaluation of any
+ ** ^(If a memory allocation error occurs during the evaluation of any
  ** of these routines, a default value is returned.  The default value
  ** is either the integer 0, the floating point number 0.0, or a NULL
  ** pointer.  Subsequent calls to [sqlite3_errcode()] will return
- ** [SQLITE_NOMEM].
+ ** [SQLITE_NOMEM].)^
- **
+ */
- ** INVARIANTS:
+ SQLITE_API const void *sqlite3_column_blob(sqlite3_stmt*, int iCol);
- **
+ SQLITE_API int sqlite3_column_bytes(sqlite3_stmt*, int iCol);
- ** {F13803} The [sqlite3_column_blob(S,N)] interface converts the
+ SQLITE_API int sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
- **          Nth column in the current row of the result set for
+ SQLITE_API double sqlite3_column_double(sqlite3_stmt*, int iCol);
- **          [prepared statement] S into a blob and then returns a
+ SQLITE_API int sqlite3_column_int(sqlite3_stmt*, int iCol);
- **          pointer to the converted value.
+ SQLITE_API sqlite3_int64 sqlite3_column_int64(sqlite3_stmt*, int iCol);
- **
+ SQLITE_API const unsigned char *sqlite3_column_text(sqlite3_stmt*, int iCol);
- ** {F13806} The [sqlite3_column_bytes(S,N)] interface returns the
+ SQLITE_API const void *sqlite3_column_text16(sqlite3_stmt*, int iCol);
- **          number of bytes in the blob or string (exclusive of the
+ SQLITE_API int sqlite3_column_type(sqlite3_stmt*, int iCol);
- **          zero terminator on the string) that was returned by the
+ SQLITE_API sqlite3_value *sqlite3_column_value(sqlite3_stmt*, int iCol);
- **          most recent call to [sqlite3_column_blob(S,N)] or
- **          [sqlite3_column_text(S,N)].
+ /*
- **
+ ** CAPI3REF: Destroy A Prepared Statement Object
- ** {F13809} The [sqlite3_column_bytes16(S,N)] interface returns the
+ **
- **          number of bytes in the string (exclusive of the
+ ** ^The sqlite3_finalize() function is called to delete a [prepared statement].
- **          zero terminator on the string) that was returned by the
+ ** ^If the most recent evaluation of the statement encountered no errors
- **          most recent call to [sqlite3_column_text16(S,N)].
+ ** or if the statement is never been evaluated, then sqlite3_finalize() returns
- **
+ ** SQLITE_OK.  ^If the most recent evaluation of statement S failed, then
- ** {F13812} The [sqlite3_column_double(S,N)] interface converts the
+ ** sqlite3_finalize(S) returns the appropriate [error code] or
- **          Nth column in the current row of the result set for
+ ** [extended error code].
- **          [prepared statement] S into a floating point value and
+ **
- **          returns a copy of that value.
+ ** ^The sqlite3_finalize(S) routine can be called at any point during
- **
+ ** the life cycle of [prepared statement] S:
- ** {F13815} The [sqlite3_column_int(S,N)] interface converts the
+ ** before statement S is ever evaluated, after
- **          Nth column in the current row of the result set for
+ ** one or more calls to [sqlite3_reset()], or after any call
- **          [prepared statement] S into a 64-bit signed integer and
+ ** to [sqlite3_step()] regardless of whether or not the statement has
- **          returns the lower 32 bits of that integer.
+ ** completed execution.
  **
- ** {F13818} The [sqlite3_column_int64(S,N)] interface converts the
+ ** ^Invoking sqlite3_finalize() on a NULL pointer is a harmless no-op.
- **          Nth column in the current row of the result set for
+ **
- **          [prepared statement] S into a 64-bit signed integer and
+ ** The application must finalize every [prepared statement] in order to avoid
- **          returns a copy of that integer.
+ ** resource leaks.  It is a grievous error for the application to try to use
- **
+ ** a prepared statement after it has been finalized.  Any use of a prepared
- ** {F13821} The [sqlite3_column_text(S,N)] interface converts the
+ ** statement after it has been finalized can result in undefined and
- **          Nth column in the current row of the result set for
+ ** undesirable behavior such as segfaults and heap corruption.
- **          [prepared statement] S into a zero-terminated UTF-8
+ */
- **          string and returns a pointer to that string.
+ SQLITE_API int sqlite3_finalize(sqlite3_stmt *pStmt);
- **
- ** {F13824} The [sqlite3_column_text16(S,N)] interface converts the
+ /*
- **          Nth column in the current row of the result set for
+ ** CAPI3REF: Reset A Prepared Statement Object
- **          [prepared statement] S into a zero-terminated 2-byte
+ **
- **          aligned UTF-16 native byte order
+ ** The sqlite3_reset() function is called to reset a [prepared statement]
- **          string and returns a pointer to that string.
+ ** object back to its initial state, ready to be re-executed.
- **
+ ** ^Any SQL statement variables that had values bound to them using
- ** {F13827} The [sqlite3_column_type(S,N)] interface returns
- **          one of [SQLITE_NULL], [SQLITE_INTEGER], [SQLITE_FLOAT],
- **          [SQLITE_TEXT], or [SQLITE_BLOB] as appropriate for
- **          the Nth column in the current row of the result set for
- **          [prepared statement] S.
- **
- ** {F13830} The [sqlite3_column_value(S,N)] interface returns a
- **          pointer to the [sqlite3_value] object that for the
- **          Nth column in the current row of the result set for
- **          [prepared statement] S.
- */
- const void *sqlite3_column_blob(sqlite3_stmt*, int iCol);
- int sqlite3_column_bytes(sqlite3_stmt*, int iCol);
- int sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
- double sqlite3_column_double(sqlite3_stmt*, int iCol);
- int sqlite3_column_int(sqlite3_stmt*, int iCol);
- sqlite3_int64 sqlite3_column_int64(sqlite3_stmt*, int iCol);
- const unsigned char *sqlite3_column_text(sqlite3_stmt*, int iCol);
- const void *sqlite3_column_text16(sqlite3_stmt*, int iCol);
- int sqlite3_column_type(sqlite3_stmt*, int iCol);
- sqlite3_value *sqlite3_column_value(sqlite3_stmt*, int iCol);
- /*
- ** CAPI3REF: Destroy A Prepared Statement Object {F13300}
- **
- ** The sqlite3_finalize() function is called to delete a
- ** [prepared statement]. If the statement was
- ** executed successfully, or not executed at all, then SQLITE_OK is returned.
- ** If execution of the statement failed then an
- ** [error code] or [extended error code]
- ** is returned.
- **
- ** This routine can be called at any point during the execution of the
- ** [prepared statement].  If the virtual machine has not
- ** completed execution when this routine is called, that is like
- ** encountering an error or an interrupt.  (See [sqlite3_interrupt()].)
- ** Incomplete updates may be rolled back and transactions cancelled,
- ** depending on the circumstances, and the
- ** [error code] returned will be [SQLITE_ABORT].
- **
- ** INVARIANTS:
- **
- ** {F11302} The [sqlite3_finalize(S)] interface destroys the
- **          [prepared statement] S and releases all
- **          memory and file resources held by that object.
- **
- ** {F11304} If the most recent call to [sqlite3_step(S)] for the
- **          [prepared statement] S returned an error,
- **          then [sqlite3_finalize(S)] returns that same error.
- */
- int sqlite3_finalize(sqlite3_stmt *pStmt);
- /*
- ** CAPI3REF: Reset A Prepared Statement Object {F13330}
- **
- ** The sqlite3_reset() function is called to reset a
- ** [prepared statement] object.
- ** back to its initial state, ready to be re-executed.
- ** Any SQL statement variables that had values bound to them using
  ** the [sqlite3_bind_blob | sqlite3_bind_*() API] retain their values.
  ** Use [sqlite3_clear_bindings()] to reset the bindings.
  **
- ** {F11332} The [sqlite3_reset(S)] interface resets the [prepared statement] S
+ ** ^The [sqlite3_reset(S)] interface resets the [prepared statement] S
- **          back to the beginning of its program.
+ ** back to the beginning of its program.
  **
- ** {F11334} If the most recent call to [sqlite3_step(S)] for
+ ** ^If the most recent call to [sqlite3_step(S)] for the
- **          [prepared statement] S returned [SQLITE_ROW] or [SQLITE_DONE],
+ ** [prepared statement] S returned [SQLITE_ROW] or [SQLITE_DONE],
- **          or if [sqlite3_step(S)] has never before been called on S,
+ ** or if [sqlite3_step(S)] has never before been called on S,
- **          then [sqlite3_reset(S)] returns [SQLITE_OK].
+ ** then [sqlite3_reset(S)] returns [SQLITE_OK].
  **
- ** {F11336} If the most recent call to [sqlite3_step(S)] for
+ ** ^If the most recent call to [sqlite3_step(S)] for the
- **          [prepared statement] S indicated an error, then
+ ** [prepared statement] S indicated an error, then
- **          [sqlite3_reset(S)] returns an appropriate [error code].
+ ** [sqlite3_reset(S)] returns an appropriate [error code].
  **
- ** {F11338} The [sqlite3_reset(S)] interface does not change the values
+ ** ^The [sqlite3_reset(S)] interface does not change the values
- **          of any [sqlite3_bind_blob|bindings] on [prepared statement] S.
+ ** of any [sqlite3_bind_blob|bindings] on the [prepared statement] S.
  */
- int sqlite3_reset(sqlite3_stmt *pStmt);
+ SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt);
  /*
- ** CAPI3REF: Create Or Redefine SQL Functions {F16100}
+ ** CAPI3REF: Create Or Redefine SQL Functions
  ** KEYWORDS: {function creation routines}
- **
+ ** KEYWORDS: {application-defined SQL function}
- ** These two functions (collectively known as
+ ** KEYWORDS: {application-defined SQL functions}
- ** "function creation routines") are used to add SQL functions or aggregates
+ **
- ** or to redefine the behavior of existing SQL functions or aggregates.  The
+ ** ^These functions (collectively known as "function creation routines")
- ** difference only between the two is that the second parameter, the
+ ** are used to add SQL functions or aggregates or to redefine the behavior
- ** name of the (scalar) function or aggregate, is encoded in UTF-8 for
+ ** of existing SQL functions or aggregates.  The only differences between
- ** sqlite3_create_function() and UTF-16 for sqlite3_create_function16().
+ ** these routines are the text encoding expected for
- **
+ ** the second parameter (the name of the function being created)
- ** The first parameter is the [database connection] to which the SQL
+ ** and the presence or absence of a destructor callback for
- ** function is to be added.  If a single
+ ** the application data pointer.
- ** program uses more than one [database connection] internally, then SQL
+ **
- ** functions must be added individually to each [database connection].
+ ** ^The first parameter is the [database connection] to which the SQL
- **
+ ** function is to be added.  ^If an application uses more than one database
- ** The second parameter is the name of the SQL function to be created
+ ** connection then application-defined SQL functions must be added
- ** or redefined.
+ ** to each database connection separately.
- ** The length of the name is limited to 255 bytes, exclusive of the
+ **
- ** zero-terminator.  Note that the name length limit is in bytes, not
+ ** ^The second parameter is the name of the SQL function to be created or
- ** characters.  Any attempt to create a function with a longer name
+ ** redefined.  ^The length of the name is limited to 255 bytes in a UTF-8
- ** will result in an SQLITE_ERROR error.
+ ** representation, exclusive of the zero-terminator.  ^Note that the name
- **
+ ** length limit is in UTF-8 bytes, not characters nor UTF-16 bytes.
- ** The third parameter is the number of arguments that the SQL function or
+ ** ^Any attempt to create a function with a longer name
- ** aggregate takes. If this parameter is negative, then the SQL function or
+ ** will result in [SQLITE_MISUSE] being returned.
- ** aggregate may take any number of arguments.
+ **
+ ** ^The third parameter (nArg)
+ ** is the number of arguments that the SQL function or
+ ** aggregate takes. ^If this parameter is -1, then the SQL function or
+ ** aggregate may take any number of arguments between 0 and the limit
+ ** set by [sqlite3_limit]([SQLITE_LIMIT_FUNCTION_ARG]).  If the third
+ ** parameter is less than -1 or greater than 127 then the behavior is
+ ** undefined.
  **
- ** The fourth parameter, eTextRep, specifies what
+ ** ^The fourth parameter, eTextRep, specifies what
  ** [SQLITE_UTF8 | text encoding] this SQL function prefers for
- ** its parameters.  Any SQL function implementation should be able to work
+ ** its parameters.  Every SQL function implementation must be able to work
- ** work with UTF-8, UTF-16le, or UTF-16be.  But some implementations may be
+ ** with UTF-8, UTF-16le, or UTF-16be.  But some implementations may be
- ** more efficient with one encoding than another.  It is allowed to
+ ** more efficient with one encoding than another.  ^An application may
  ** invoke sqlite3_create_function() or sqlite3_create_function16() multiple
  ** times with the same function but with different values of eTextRep.
- ** When multiple implementations of the same function are available, SQLite
+ ** ^When multiple implementations of the same function are available, SQLite
  ** will pick the one that involves the least amount of data conversion.
- ** If there is only a single implementation which does not care what
+ ** If there is only a single implementation which does not care what text
- ** text encoding is used, then the fourth argument should be
+ ** encoding is used, then the fourth argument should be [SQLITE_ANY].
- ** [SQLITE_ANY].
+ **
- **
+ ** ^(The fifth parameter is an arbitrary pointer.  The implementation of the
- ** The fifth parameter is an arbitrary pointer.  The implementation
+ ** function can gain access to this pointer using [sqlite3_user_data()].)^
- ** of the function can gain access to this pointer using
- ** [sqlite3_user_data()].
- **
- ** The seventh, eighth and ninth parameters, xFunc, xStep and xFinal, are
- ** pointers to C-language functions that implement the SQL
- ** function or aggregate. A scalar SQL function requires an implementation of
- ** the xFunc callback only, NULL pointers should be passed as the xStep
- ** and xFinal parameters. An aggregate SQL function requires an implementation
- ** of xStep and xFinal and NULL should be passed for xFunc. To delete an
- ** existing SQL function or aggregate, pass NULL for all three function
- ** callback.
  **
- ** It is permitted to register multiple implementations of the same
+ ** ^The sixth, seventh and eighth parameters, xFunc, xStep and xFinal, are
+ ** pointers to C-language functions that implement the SQL function or
+ ** aggregate. ^A scalar SQL function requires an implementation of the xFunc
+ ** callback only; NULL pointers must be passed as the xStep and xFinal
+ ** parameters. ^An aggregate SQL function requires an implementation of xStep
+ ** and xFinal and NULL pointer must be passed for xFunc. ^To delete an existing
+ ** SQL function or aggregate, pass NULL pointers for all three function
+ ** callbacks.
+ **
+ ** ^(If the ninth parameter to sqlite3_create_function_v2() is not NULL,
+ ** then it is destructor for the application data pointer.
+ ** The destructor is invoked when the function is deleted, either by being
+ ** overloaded or when the database connection closes.)^
+ ** ^The destructor is also invoked if the call to
+ ** sqlite3_create_function_v2() fails.
+ ** ^When the destructor callback of the tenth parameter is invoked, it
+ ** is passed a single argument which is a copy of the application data
+ ** pointer which was the fifth parameter to sqlite3_create_function_v2().
+ **
+ ** ^It is permitted to register multiple implementations of the same
  ** functions with the same name but with either differing numbers of
- ** arguments or differing perferred text encodings.  SQLite will use
+ ** arguments or differing preferred text encodings.  ^SQLite will use
- ** the implementation most closely matches the way in which the
+ ** the implementation that most closely matches the way in which the
- ** SQL function is used.
+ ** SQL function is used.  ^A function implementation with a non-negative
- **
+ ** nArg parameter is a better match than a function implementation with
- ** INVARIANTS:
+ ** a negative nArg.  ^A function where the preferred text encoding
- **
+ ** matches the database encoding is a better
- ** {F16103} The [sqlite3_create_function16()] interface behaves exactly
+ ** match than a function where the encoding is different.
- **          like [sqlite3_create_function()] in every way except that it
+ ** ^A function where the encoding difference is between UTF16le and UTF16be
- **          interprets the zFunctionName argument as
+ ** is a closer match than a function where the encoding difference is
- **          zero-terminated UTF-16 native byte order instead of as a
+ ** between UTF8 and UTF16.
- **          zero-terminated UTF-8.
+ **
- **
+ ** ^Built-in functions may be overloaded by new application-defined functions.
- ** {F16106} A successful invocation of
+ **
- **          the [sqlite3_create_function(D,X,N,E,...)] interface registers
+ ** ^An application-defined function is permitted to call other
- **          or replaces callback functions in [database connection] D
+ ** SQLite interfaces.  However, such calls must not
- **          used to implement the SQL function named X with N parameters
+ ** close the database connection nor finalize or reset the prepared
- **          and having a perferred text encoding of E.
+ ** statement in which the function is running.
- **
- ** {F16109} A successful call to [sqlite3_create_function(D,X,N,E,P,F,S,L)]
- **          replaces the P, F, S, and L values from any prior calls with
- **          the same D, X, N, and E values.
- **
- ** {F16112} The [sqlite3_create_function(D,X,...)] interface fails with
- **          a return code of [SQLITE_ERROR] if the SQL function name X is
- **          longer than 255 bytes exclusive of the zero terminator.
- **
- ** {F16118} Either F must be NULL and S and L are non-NULL or else F
- **          is non-NULL and S and L are NULL, otherwise
- **          [sqlite3_create_function(D,X,N,E,P,F,S,L)] returns [SQLITE_ERROR].
- **
- ** {F16121} The [sqlite3_create_function(D,...)] interface fails with an
- **          error code of [SQLITE_BUSY] if there exist [prepared statements]
- **          associated with the [database connection] D.
- **
- ** {F16124} The [sqlite3_create_function(D,X,N,...)] interface fails with an
- **          error code of [SQLITE_ERROR] if parameter N (specifying the number
- **          of arguments to the SQL function being registered) is less
- **          than -1 or greater than 127.
- **
- ** {F16127} When N is non-negative, the [sqlite3_create_function(D,X,N,...)]
- **          interface causes callbacks to be invoked for the SQL function
- **          named X when the number of arguments to the SQL function is
- **          exactly N.
- **
- ** {F16130} When N is -1, the [sqlite3_create_function(D,X,N,...)]
- **          interface causes callbacks to be invoked for the SQL function
- **          named X with any number of arguments.
- **
- ** {F16133} When calls to [sqlite3_create_function(D,X,N,...)]
- **          specify multiple implementations of the same function X
- **          and when one implementation has N>=0 and the other has N=(-1)
- **          the implementation with a non-zero N is preferred.
- **
- ** {F16136} When calls to [sqlite3_create_function(D,X,N,E,...)]
- **          specify multiple implementations of the same function X with
- **          the same number of arguments N but with different
- **          encodings E, then the implementation where E matches the
- **          database encoding is preferred.
- **
- ** {F16139} For an aggregate SQL function created using
- **          [sqlite3_create_function(D,X,N,E,P,0,S,L)] the finializer
- **          function L will always be invoked exactly once if the
- **          step function S is called one or more times.
  */
- int sqlite3_create_function(
+ SQLITE_API int sqlite3_create_function(
    sqlite3 *db,
    const char *zFunctionName,
    int nArg,
- Line 3361  int sqlite3_create_function(
+ Line 4000  int sqlite3_create_function(
    void (*xStep)(sqlite3_context*,int,sqlite3_value**),
    void (*xFinal)(sqlite3_context*)
  );
- int sqlite3_create_function16(
+ SQLITE_API int sqlite3_create_function16(
    sqlite3 *db,
    const void *zFunctionName,
    int nArg,
- Line 3371  int sqlite3_create_function16(
+ Line 4010  int sqlite3_create_function16(
    void (*xStep)(sqlite3_context*,int,sqlite3_value**),
    void (*xFinal)(sqlite3_context*)
  );
+ SQLITE_API int sqlite3_create_function_v2(
+   sqlite3 *db,
+   const char *zFunctionName,
+   int nArg,
+   int eTextRep,
+   void *pApp,
+   void (*xFunc)(sqlite3_context*,int,sqlite3_value**),
+   void (*xStep)(sqlite3_context*,int,sqlite3_value**),
+   void (*xFinal)(sqlite3_context*),
+   void(*xDestroy)(void*)
+ );
  /*
- ** CAPI3REF: Text Encodings {F10267}
+ ** CAPI3REF: Text Encodings
  **
  ** These constant define integer codes that represent the various
  ** text encodings supported by SQLite.
- Line 3386  int sqlite3_create_function16(
+ Line 4036  int sqlite3_create_function16(
  #define SQLITE_UTF16_ALIGNED  8    /* sqlite3_create_collation only */
  /*
- ** CAPI3REF: Obsolete Functions
+ ** CAPI3REF: Deprecated Functions
+ ** DEPRECATED
  **
- ** These functions are all now obsolete.  In order to maintain
+ ** These functions are [deprecated].  In order to maintain
- ** backwards compatibility with older code, we continue to support
+ ** backwards compatibility with older code, these functions continue
- ** these functions.  However, new development projects should avoid
+ ** to be supported.  However, new applications should avoid
  ** the use of these functions.  To help encourage people to avoid
- ** using these functions, we are not going to tell you want they do.
+ ** using these functions, we are not going to tell you what they do.
  */
- int sqlite3_aggregate_count(sqlite3_context*);
+ #ifndef SQLITE_OMIT_DEPRECATED
- int sqlite3_expired(sqlite3_stmt*);
+ SQLITE_API SQLITE_DEPRECATED int sqlite3_aggregate_count(sqlite3_context*);
- int sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
+ SQLITE_API SQLITE_DEPRECATED int sqlite3_expired(sqlite3_stmt*);
- int sqlite3_global_recover(void);
+ SQLITE_API SQLITE_DEPRECATED int sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
- void sqlite3_thread_cleanup(void);
+ SQLITE_API SQLITE_DEPRECATED int sqlite3_global_recover(void);
- int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),void*,sqlite3_int64);
+ SQLITE_API SQLITE_DEPRECATED void sqlite3_thread_cleanup(void);
+ SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),
+                       void*,sqlite3_int64);
+ #endif
  /*
- ** CAPI3REF: Obtaining SQL Function Parameter Values {F15100}
+ ** CAPI3REF: Obtaining SQL Function Parameter Values
  **
  ** The C-language implementation of SQL functions and aggregates uses
  ** this set of interface routines to access the parameter values on
- Line 3411  int sqlite3_memory_alarm(void(*)(void*,s
+ Line 4065  int sqlite3_memory_alarm(void(*)(void*,s
  ** The xFunc (for scalar functions) or xStep (for aggregates) parameters
  ** to [sqlite3_create_function()] and [sqlite3_create_function16()]
  ** define callbacks that implement the SQL functions and aggregates.
- ** The 4th parameter to these callbacks is an array of pointers to
+ ** The 3rd parameter to these callbacks is an array of pointers to
- ** [sqlite3_value] objects.  There is one [sqlite3_value] object for
+ ** [protected sqlite3_value] objects.  There is one [sqlite3_value] object for
  ** each parameter to the SQL function.  These routines are used to
  ** extract values from the [sqlite3_value] objects.
  **
- ** These routines work just like the corresponding
+ ** These routines work only with [protected sqlite3_value] objects.
- ** [sqlite3_column_blob | sqlite3_column_* routines] except that
+ ** Any attempt to use these routines on an [unprotected sqlite3_value]
- ** these routines take a single [sqlite3_value*] pointer instead
+ ** object results in undefined behavior.
- ** of an [sqlite3_stmt*] pointer and an integer column number.
+ **
+ ** ^These routines work just like the corresponding [column access functions]
+ ** except that  these routines take a single [protected sqlite3_value] object
+ ** pointer instead of a [sqlite3_stmt*] pointer and an integer column number.
  **
- ** The sqlite3_value_text16() interface extracts a UTF16 string
+ ** ^The sqlite3_value_text16() interface extracts a UTF-16 string
- ** in the native byte-order of the host machine.  The
+ ** in the native byte-order of the host machine.  ^The
  ** sqlite3_value_text16be() and sqlite3_value_text16le() interfaces
- ** extract UTF16 strings as big-endian and little-endian respectively.
+ ** extract UTF-16 strings as big-endian and little-endian respectively.
  **
- ** The sqlite3_value_numeric_type() interface attempts to apply
+ ** ^(The sqlite3_value_numeric_type() interface attempts to apply
  ** numeric affinity to the value.  This means that an attempt is
  ** made to convert the value to an integer or floating point.  If
  ** such a conversion is possible without loss of information (in other
- ** words if the value is a string that looks like a number)
+ ** words, if the value is a string that looks like a number)
- ** then the conversion is done.  Otherwise no conversion occurs.  The
+ ** then the conversion is performed.  Otherwise no conversion occurs.
- ** [SQLITE_INTEGER | datatype] after conversion is returned.
+ ** The [SQLITE_INTEGER | datatype] after conversion is returned.)^
  **
- ** Please pay particular attention to the fact that the pointer that
+ ** Please pay particular attention to the fact that the pointer returned
- ** is returned from [sqlite3_value_blob()], [sqlite3_value_text()], or
+ ** from [sqlite3_value_blob()], [sqlite3_value_text()], or
  ** [sqlite3_value_text16()] can be invalidated by a subsequent call to
  ** [sqlite3_value_bytes()], [sqlite3_value_bytes16()], [sqlite3_value_text()],
  ** or [sqlite3_value_text16()].
  **
  ** These routines must be called from the same thread as
- ** the SQL function that supplied the sqlite3_value* parameters.
+ ** the SQL function that supplied the [sqlite3_value*] parameters.
- ** Or, if the sqlite3_value* argument comes from the [sqlite3_column_value()]
+ */
- ** interface, then these routines should be called from the same thread
+ SQLITE_API const void *sqlite3_value_blob(sqlite3_value*);
- ** that ran [sqlite3_column_value()].
+ SQLITE_API int sqlite3_value_bytes(sqlite3_value*);
- **
+ SQLITE_API int sqlite3_value_bytes16(sqlite3_value*);
- **
+ SQLITE_API double sqlite3_value_double(sqlite3_value*);
- ** INVARIANTS:
+ SQLITE_API int sqlite3_value_int(sqlite3_value*);
- **
+ SQLITE_API sqlite3_int64 sqlite3_value_int64(sqlite3_value*);
- ** {F15103} The [sqlite3_value_blob(V)] interface converts the
+ SQLITE_API const unsigned char *sqlite3_value_text(sqlite3_value*);
- **          [sqlite3_value] object V into a blob and then returns a
+ SQLITE_API const void *sqlite3_value_text16(sqlite3_value*);
- **          pointer to the converted value.
+ SQLITE_API const void *sqlite3_value_text16le(sqlite3_value*);
- **
+ SQLITE_API const void *sqlite3_value_text16be(sqlite3_value*);
- ** {F15106} The [sqlite3_value_bytes(V)] interface returns the
+ SQLITE_API int sqlite3_value_type(sqlite3_value*);
- **          number of bytes in the blob or string (exclusive of the
+ SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*);
- **          zero terminator on the string) that was returned by the
- **          most recent call to [sqlite3_value_blob(V)] or
+ /*
- **          [sqlite3_value_text(V)].
+ ** CAPI3REF: Obtain Aggregate Function Context
  **
- ** {F15109} The [sqlite3_value_bytes16(V)] interface returns the
+ ** Implementations of aggregate SQL functions use this
- **          number of bytes in the string (exclusive of the
+ ** routine to allocate memory for storing their state.
- **          zero terminator on the string) that was returned by the
+ **
- **          most recent call to [sqlite3_value_text16(V)],
+ ** ^The first time the sqlite3_aggregate_context(C,N) routine is called
- **          [sqlite3_value_text16be(V)], or [sqlite3_value_text16le(V)].
+ ** for a particular aggregate function, SQLite
- **
+ ** allocates N of memory, zeroes out that memory, and returns a pointer
- ** {F15112} The [sqlite3_value_double(V)] interface converts the
+ ** to the new memory. ^On second and subsequent calls to
- **          [sqlite3_value] object V into a floating point value and
+ ** sqlite3_aggregate_context() for the same aggregate function instance,
- **          returns a copy of that value.
+ ** the same buffer is returned.  Sqlite3_aggregate_context() is normally
- **
+ ** called once for each invocation of the xStep callback and then one
- ** {F15115} The [sqlite3_value_int(V)] interface converts the
+ ** last time when the xFinal callback is invoked.  ^(When no rows match
- **          [sqlite3_value] object V into a 64-bit signed integer and
+ ** an aggregate query, the xStep() callback of the aggregate function
- **          returns the lower 32 bits of that integer.
+ ** implementation is never called and xFinal() is called exactly once.
- **
+ ** In those cases, sqlite3_aggregate_context() might be called for the
- ** {F15118} The [sqlite3_value_int64(V)] interface converts the
+ ** first time from within xFinal().)^
- **          [sqlite3_value] object V into a 64-bit signed integer and
+ **
- **          returns a copy of that integer.
+ ** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer
- **
+ ** when first called if N is less than or equal to zero or if a memory
- ** {F15121} The [sqlite3_value_text(V)] interface converts the
+ ** allocate error occurs.
- **          [sqlite3_value] object V into a zero-terminated UTF-8
+ **
- **          string and returns a pointer to that string.
+ ** ^(The amount of space allocated by sqlite3_aggregate_context(C,N) is
- **
+ ** determined by the N parameter on first successful call.  Changing the
- ** {F15124} The [sqlite3_value_text16(V)] interface converts the
+ ** value of N in subsequent call to sqlite3_aggregate_context() within
- **          [sqlite3_value] object V into a zero-terminated 2-byte
+ ** the same aggregate function instance will not resize the memory
- **          aligned UTF-16 native byte order
+ ** allocation.)^  Within the xFinal callback, it is customary to set
- **          string and returns a pointer to that string.
+ ** N=0 in calls to sqlite3_aggregate_context(C,N) so that no
- **
+ ** pointless memory allocations occur.
- ** {F15127} The [sqlite3_value_text16be(V)] interface converts the
+ **
- **          [sqlite3_value] object V into a zero-terminated 2-byte
+ ** ^SQLite automatically frees the memory allocated by
- **          aligned UTF-16 big-endian
+ ** sqlite3_aggregate_context() when the aggregate query concludes.
- **          string and returns a pointer to that string.
+ **
- **
+ ** The first parameter must be a copy of the
- ** {F15130} The [sqlite3_value_text16le(V)] interface converts the
+ ** [sqlite3_context | SQL function context] that is the first parameter
- **          [sqlite3_value] object V into a zero-terminated 2-byte
+ ** to the xStep or xFinal callback routine that implements the aggregate
- **          aligned UTF-16 little-endian
- **          string and returns a pointer to that string.
- **
- ** {F15133} The [sqlite3_value_type(V)] interface returns
- **          one of [SQLITE_NULL], [SQLITE_INTEGER], [SQLITE_FLOAT],
- **          [SQLITE_TEXT], or [SQLITE_BLOB] as appropriate for
- **          the [sqlite3_value] object V.
- **
- ** {F15136} The [sqlite3_value_numeric_type(V)] interface converts
- **          the [sqlite3_value] object V into either an integer or
- **          a floating point value if it can do so without loss of
- **          information, and returns one of [SQLITE_NULL],
- **          [SQLITE_INTEGER], [SQLITE_FLOAT], [SQLITE_TEXT], or
- **          [SQLITE_BLOB] as appropriate for
- **          the [sqlite3_value] object V after the conversion attempt.
- */
- const void *sqlite3_value_blob(sqlite3_value*);
- int sqlite3_value_bytes(sqlite3_value*);
- int sqlite3_value_bytes16(sqlite3_value*);
- double sqlite3_value_double(sqlite3_value*);
- int sqlite3_value_int(sqlite3_value*);
- sqlite3_int64 sqlite3_value_int64(sqlite3_value*);
- const unsigned char *sqlite3_value_text(sqlite3_value*);
- const void *sqlite3_value_text16(sqlite3_value*);
- const void *sqlite3_value_text16le(sqlite3_value*);
- const void *sqlite3_value_text16be(sqlite3_value*);
- int sqlite3_value_type(sqlite3_value*);
- int sqlite3_value_numeric_type(sqlite3_value*);
- /*
- ** CAPI3REF: Obtain Aggregate Function Context {F16210}
- **
- ** The implementation of aggregate SQL functions use this routine to allocate
- ** a structure for storing their state.
- ** The first time the sqlite3_aggregate_context() routine is
- ** is called for a particular aggregate, SQLite allocates nBytes of memory
- ** zeros that memory, and returns a pointer to it.
- ** On second and subsequent calls to sqlite3_aggregate_context()
- ** for the same aggregate function index, the same buffer is returned.
- ** The implementation
- ** of the aggregate can use the returned buffer to accumulate data.
- **
- ** SQLite automatically frees the allocated buffer when the aggregate
- ** query concludes.
- **
- ** The first parameter should be a copy of the
- ** [sqlite3_context | SQL function context] that is the first
- ** parameter to the callback routine that implements the aggregate
  ** function.
  **
  ** This routine must be called from the same thread in which
  ** the aggregate SQL function is running.
- **
- ** INVARIANTS:
- **
- ** {F16211} The first invocation of [sqlite3_aggregate_context(C,N)] for
- **          a particular instance of an aggregate function (for a particular
- **          context C) causes SQLite to allocation N bytes of memory,
- **          zero that memory, and return a pointer to the allocationed
- **          memory.
- **
- ** {F16213} If a memory allocation error occurs during
- **          [sqlite3_aggregate_context(C,N)] then the function returns 0.
- **
- ** {F16215} Second and subsequent invocations of
- **          [sqlite3_aggregate_context(C,N)] for the same context pointer C
- **          ignore the N parameter and return a pointer to the same
- **          block of memory returned by the first invocation.
- **
- ** {F16217} The memory allocated by [sqlite3_aggregate_context(C,N)] is
- **          automatically freed on the next call to [sqlite3_reset()]
- **          or [sqlite3_finalize()] for the [prepared statement] containing
- **          the aggregate function associated with context C.
  */
- void *sqlite3_aggregate_context(sqlite3_context*, int nBytes);
+ SQLITE_API void *sqlite3_aggregate_context(sqlite3_context*, int nBytes);
  /*
- ** CAPI3REF: User Data For Functions {F16240}
+ ** CAPI3REF: User Data For Functions
  **
- ** The sqlite3_user_data() interface returns a copy of
+ ** ^The sqlite3_user_data() interface returns a copy of
  ** the pointer that was the pUserData parameter (the 5th parameter)
- ** of the the [sqlite3_create_function()]
+ ** of the [sqlite3_create_function()]
  ** and [sqlite3_create_function16()] routines that originally
- ** registered the application defined function. {END}
+ ** registered the application defined function.
  **
  ** This routine must be called from the same thread in which
  ** the application-defined function is running.
+ */
+ SQLITE_API void *sqlite3_user_data(sqlite3_context*);
+ /*
+ ** CAPI3REF: Database Connection For Functions
  **
- ** INVARIANTS:
+ ** ^The sqlite3_context_db_handle() interface returns a copy of
- **
+ ** the pointer to the [database connection] (the 1st parameter)
- ** {F16243} The [sqlite3_user_data(C)] interface returns a copy of the
+ ** of the [sqlite3_create_function()]
- **          P pointer from the [sqlite3_create_function(D,X,N,E,P,F,S,L)]
+ ** and [sqlite3_create_function16()] routines that originally
- **          or [sqlite3_create_function16(D,X,N,E,P,F,S,L)] call that
+ ** registered the application defined function.
- **          registered the SQL function associated with
- **          [sqlite3_context] C.
  */
- void *sqlite3_user_data(sqlite3_context*);
+ SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context*);
  /*
- ** CAPI3REF: Function Auxiliary Data {F16270}
+ ** CAPI3REF: Function Auxiliary Data
  **
- ** The following two functions may be used by scalar SQL functions to
+ ** These functions may be used by (non-aggregate) SQL functions to
- ** associate meta-data with argument values. If the same value is passed to
+ ** associate metadata with argument values. If the same value is passed to
  ** multiple invocations of the same SQL function during query execution, under
- ** some circumstances the associated meta-data may be preserved. This may
+ ** some circumstances the associated metadata may be preserved.  An example
- ** be used, for example, to add a regular-expression matching scalar
+ ** of where this might be useful is in a regular-expression matching
- ** function. The compiled version of the regular expression is stored as
+ ** function. The compiled version of the regular expression can be stored as
- ** meta-data associated with the SQL value passed as the regular expression
+ ** metadata associated with the pattern string.
- ** pattern.  The compiled regular expression can be reused on multiple
+ ** Then as long as the pattern string remains the same,
- ** invocations of the same function so that the original pattern string
+ ** the compiled regular expression can be reused on multiple
- ** does not need to be recompiled on each invocation.
+ ** invocations of the same function.
  **
- ** The sqlite3_get_auxdata() interface returns a pointer to the meta-data
+ ** ^The sqlite3_get_auxdata() interface returns a pointer to the metadata
  ** associated by the sqlite3_set_auxdata() function with the Nth argument
- ** value to the application-defined function.
+ ** value to the application-defined function. ^If there is no metadata
- ** If no meta-data has been ever been set for the Nth
+ ** associated with the function argument, this sqlite3_get_auxdata() interface
- ** argument of the function, or if the cooresponding function parameter
- ** has changed since the meta-data was set, then sqlite3_get_auxdata()
  ** returns a NULL pointer.
  **
- ** The sqlite3_set_auxdata() interface saves the meta-data
+ ** ^The sqlite3_set_auxdata(C,N,P,X) interface saves P as metadata for the N-th
- ** pointed to by its 3rd parameter as the meta-data for the N-th
+ ** argument of the application-defined function.  ^Subsequent
- ** argument of the application-defined function.  Subsequent
+ ** calls to sqlite3_get_auxdata(C,N) return P from the most recent
- ** calls to sqlite3_get_auxdata() might return this data, if it has
+ ** sqlite3_set_auxdata(C,N,P,X) call if the metadata is still valid or
- ** not been destroyed.
+ ** NULL if the metadata has been discarded.
- ** If it is not NULL, SQLite will invoke the destructor
+ ** ^After each call to sqlite3_set_auxdata(C,N,P,X) where X is not NULL,
- ** function given by the 4th parameter to sqlite3_set_auxdata() on
+ ** SQLite will invoke the destructor function X with parameter P exactly
- ** the meta-data when the corresponding function parameter changes
+ ** once, when the metadata is discarded.
- ** or when the SQL statement completes, whichever comes first.
+ ** SQLite is free to discard the metadata at any time, including: <ul>
- **
+ ** <li> when the corresponding function parameter changes, or
- ** SQLite is free to call the destructor and drop meta-data on
+ ** <li> when [sqlite3_reset()] or [sqlite3_finalize()] is called for the
- ** any parameter of any function at any time.  The only guarantee
+ **      SQL statement, or
- ** is that the destructor will be called before the metadata is
+ ** <li> when sqlite3_set_auxdata() is invoked again on the same parameter, or
- ** dropped.
+ ** <li> during the original sqlite3_set_auxdata() call when a memory
- **
+ **      allocation error occurs. </ul>)^
- ** In practice, meta-data is preserved between function calls for
+ **
- ** expressions that are constant at compile time. This includes literal
+ ** Note the last bullet in particular.  The destructor X in
- ** values and SQL variables.
+ ** sqlite3_set_auxdata(C,N,P,X) might be called immediately, before the
+ ** sqlite3_set_auxdata() interface even returns.  Hence sqlite3_set_auxdata()
+ ** should be called near the end of the function implementation and the
+ ** function implementation should not make any use of P after
+ ** sqlite3_set_auxdata() has been called.
+ **
+ ** ^(In practice, metadata is preserved between function calls for
+ ** function parameters that are compile-time constants, including literal
+ ** values and [parameters] and expressions composed from the same.)^
  **
  ** These routines must be called from the same thread in which
  ** the SQL function is running.
- **
- ** INVARIANTS:
- **
- ** {F16272} The [sqlite3_get_auxdata(C,N)] interface returns a pointer
- **          to metadata associated with the Nth parameter of the SQL function
- **          whose context is C, or NULL if there is no metadata associated
- **          with that parameter.
- **
- ** {F16274} The [sqlite3_set_auxdata(C,N,P,D)] interface assigns a metadata
- **          pointer P to the Nth parameter of the SQL function with context
- **          C.
- **
- ** {F16276} SQLite will invoke the destructor D with a single argument
- **          which is the metadata pointer P following a call to
- **          [sqlite3_set_auxdata(C,N,P,D)] when SQLite ceases to hold
- **          the metadata.
- **
- ** {F16277} SQLite ceases to hold metadata for an SQL function parameter
- **          when the value of that parameter changes.
- **
- ** {F16278} When [sqlite3_set_auxdata(C,N,P,D)] is invoked, the destructor
- **          is called for any prior metadata associated with the same function
- **          context C and parameter N.
- **
- ** {F16279} SQLite will call destructors for any metadata it is holding
- **          in a particular [prepared statement] S when either
- **          [sqlite3_reset(S)] or [sqlite3_finalize(S)] is called.
  */
- void *sqlite3_get_auxdata(sqlite3_context*, int N);
+ SQLITE_API void *sqlite3_get_auxdata(sqlite3_context*, int N);
- void sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
+ SQLITE_API void sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
  /*
- ** CAPI3REF: Constants Defining Special Destructor Behavior {F10280}
+ ** CAPI3REF: Constants Defining Special Destructor Behavior
  **
- ** These are special value for the destructor that is passed in as the
+ ** These are special values for the destructor that is passed in as the
- ** final argument to routines like [sqlite3_result_blob()].  If the destructor
+ ** final argument to routines like [sqlite3_result_blob()].  ^If the destructor
  ** argument is SQLITE_STATIC, it means that the content pointer is constant
- ** and will never change.  It does not need to be destroyed.  The
+ ** and will never change.  It does not need to be destroyed.  ^The
  ** SQLITE_TRANSIENT value means that the content will likely change in
  ** the near future and that SQLite should make its own private copy of
  ** the content before returning.
  **
  ** The typedef is necessary to work around problems in certain
- ** C++ compilers.  See ticket #2191.
+ ** C++ compilers.
  */
  typedef void (*sqlite3_destructor_type)(void*);
  #define SQLITE_STATIC      ((sqlite3_destructor_type)0)
  #define SQLITE_TRANSIENT   ((sqlite3_destructor_type)-1)
  /*
- ** CAPI3REF: Setting The Result Of An SQL Function {F16400}
+ ** CAPI3REF: Setting The Result Of An SQL Function
  **
  ** These routines are used by the xFunc or xFinal callbacks that
  ** implement SQL functions and aggregates.  See
  ** [sqlite3_create_function()] and [sqlite3_create_function16()]
  ** for additional information.
  **
- ** These functions work very much like the
+ ** These functions work very much like the [parameter binding] family of
- ** [sqlite3_bind_blob | sqlite3_bind_*] family of functions used
+ ** functions used to bind values to host parameters in prepared statements.
- ** to bind values to host parameters in prepared statements.
+ ** Refer to the [SQL parameter] documentation for additional information.
- ** Refer to the
- ** [sqlite3_bind_blob | sqlite3_bind_* documentation] for
- ** additional information.
  **
- ** The sqlite3_result_blob() interface sets the result from
+ ** ^The sqlite3_result_blob() interface sets the result from
- ** an application defined function to be the BLOB whose content is pointed
+ ** an application-defined function to be the BLOB whose content is pointed
  ** to by the second parameter and which is N bytes long where N is the
  ** third parameter.
- ** The sqlite3_result_zeroblob() inerfaces set the result of
+ **
- ** the application defined function to be a BLOB containing all zero
+ ** ^The sqlite3_result_zeroblob() interfaces set the result of
+ ** the application-defined function to be a BLOB containing all zero
  ** bytes and N bytes in size, where N is the value of the 2nd parameter.
  **
- ** The sqlite3_result_double() interface sets the result from
+ ** ^The sqlite3_result_double() interface sets the result from
- ** an application defined function to be a floating point value specified
+ ** an application-defined function to be a floating point value specified
  ** by its 2nd argument.
  **
- ** The sqlite3_result_error() and sqlite3_result_error16() functions
+ ** ^The sqlite3_result_error() and sqlite3_result_error16() functions
  ** cause the implemented SQL function to throw an exception.
- ** SQLite uses the string pointed to by the
+ ** ^SQLite uses the string pointed to by the
  ** 2nd parameter of sqlite3_result_error() or sqlite3_result_error16()
- ** as the text of an error message.  SQLite interprets the error
+ ** as the text of an error message.  ^SQLite interprets the error
- ** message string from sqlite3_result_error() as UTF8. SQLite
+ ** message string from sqlite3_result_error() as UTF-8. ^SQLite
- ** interprets the string from sqlite3_result_error16() as UTF16 in native
+ ** interprets the string from sqlite3_result_error16() as UTF-16 in native
- ** byte order.  If the third parameter to sqlite3_result_error()
+ ** byte order.  ^If the third parameter to sqlite3_result_error()
  ** or sqlite3_result_error16() is negative then SQLite takes as the error
  ** message all text up through the first zero character.
- ** If the third parameter to sqlite3_result_error() or
+ ** ^If the third parameter to sqlite3_result_error() or
  ** sqlite3_result_error16() is non-negative then SQLite takes that many
  ** bytes (not characters) from the 2nd parameter as the error message.
- ** The sqlite3_result_error() and sqlite3_result_error16()
+ ** ^The sqlite3_result_error() and sqlite3_result_error16()
- ** routines make a copy private copy of the error message text before
+ ** routines make a private copy of the error message text before
  ** they return.  Hence, the calling function can deallocate or
  ** modify the text after they return without harm.
- ** The sqlite3_result_error_code() function changes the error code
+ ** ^The sqlite3_result_error_code() function changes the error code
- ** returned by SQLite as a result of an error in a function.  By default,
+ ** returned by SQLite as a result of an error in a function.  ^By default,
- ** the error code is SQLITE_ERROR.
+ ** the error code is SQLITE_ERROR.  ^A subsequent call to sqlite3_result_error()
- **
+ ** or sqlite3_result_error16() resets the error code to SQLITE_ERROR.
- ** The sqlite3_result_toobig() interface causes SQLite
- ** to throw an error indicating that a string or BLOB is to long
- ** to represent.  The sqlite3_result_nomem() interface
- ** causes SQLite to throw an exception indicating that the a
- ** memory allocation failed.
  **
- ** The sqlite3_result_int() interface sets the return value
+ ** ^The sqlite3_result_error_toobig() interface causes SQLite to throw an
+ ** error indicating that a string or BLOB is too long to represent.
+ **
+ ** ^The sqlite3_result_error_nomem() interface causes SQLite to throw an
+ ** error indicating that a memory allocation failed.
+ **
+ ** ^The sqlite3_result_int() interface sets the return value
  ** of the application-defined function to be the 32-bit signed integer
  ** value given in the 2nd argument.
- ** The sqlite3_result_int64() interface sets the return value
+ ** ^The sqlite3_result_int64() interface sets the return value
  ** of the application-defined function to be the 64-bit signed integer
  ** value given in the 2nd argument.
  **
- ** The sqlite3_result_null() interface sets the return value
+ ** ^The sqlite3_result_null() interface sets the return value
  ** of the application-defined function to be NULL.
  **
- ** The sqlite3_result_text(), sqlite3_result_text16(),
+ ** ^The sqlite3_result_text(), sqlite3_result_text16(),
  ** sqlite3_result_text16le(), and sqlite3_result_text16be() interfaces
  ** set the return value of the application-defined function to be
  ** a text string which is represented as UTF-8, UTF-16 native byte order,
  ** UTF-16 little endian, or UTF-16 big endian, respectively.
- ** SQLite takes the text result from the application from
+ ** ^SQLite takes the text result from the application from
  ** the 2nd parameter of the sqlite3_result_text* interfaces.
- ** If the 3rd parameter to the sqlite3_result_text* interfaces
+ ** ^If the 3rd parameter to the sqlite3_result_text* interfaces
  ** is negative, then SQLite takes result text from the 2nd parameter
  ** through the first zero character.
- ** If the 3rd parameter to the sqlite3_result_text* interfaces
+ ** ^If the 3rd parameter to the sqlite3_result_text* interfaces
  ** is non-negative, then as many bytes (not characters) of the text
  ** pointed to by the 2nd parameter are taken as the application-defined
- ** function result.
+ ** function result.  If the 3rd parameter is non-negative, then it
- ** If the 4th parameter to the sqlite3_result_text* interfaces
+ ** must be the byte offset into the string where the NUL terminator would
+ ** appear if the string where NUL terminated.  If any NUL characters occur
+ ** in the string at a byte offset that is less than the value of the 3rd
+ ** parameter, then the resulting string will contain embedded NULs and the
+ ** result of expressions operating on strings with embedded NULs is undefined.
+ ** ^If the 4th parameter to the sqlite3_result_text* interfaces
  ** or sqlite3_result_blob is a non-NULL pointer, then SQLite calls that
- ** function as the destructor on the text or blob result when it has
+ ** function as the destructor on the text or BLOB result when it has
  ** finished using that result.
- ** If the 4th parameter to the sqlite3_result_text* interfaces
+ ** ^If the 4th parameter to the sqlite3_result_text* interfaces or to
- ** or sqlite3_result_blob is the special constant SQLITE_STATIC, then
+ ** sqlite3_result_blob is the special constant SQLITE_STATIC, then SQLite
- ** SQLite assumes that the text or blob result is constant space and
+ ** assumes that the text or BLOB result is in constant space and does not
- ** does not copy the space or call a destructor when it has
+ ** copy the content of the parameter nor call a destructor on the content
- ** finished using that result.
+ ** when it has finished using that result.
- ** If the 4th parameter to the sqlite3_result_text* interfaces
+ ** ^If the 4th parameter to the sqlite3_result_text* interfaces
  ** or sqlite3_result_blob is the special constant SQLITE_TRANSIENT
  ** then SQLite makes a copy of the result into space obtained from
  ** from [sqlite3_malloc()] before it returns.
  **
- ** The sqlite3_result_value() interface sets the result of
+ ** ^The sqlite3_result_value() interface sets the result of
- ** the application-defined function to be a copy the [sqlite3_value]
+ ** the application-defined function to be a copy the
- ** object specified by the 2nd parameter.  The
+ ** [unprotected sqlite3_value] object specified by the 2nd parameter.  ^The
  ** sqlite3_result_value() interface makes a copy of the [sqlite3_value]
- ** so that [sqlite3_value] specified in the parameter may change or
+ ** so that the [sqlite3_value] specified in the parameter may change or
  ** be deallocated after sqlite3_result_value() returns without harm.
+ ** ^A [protected sqlite3_value] object may always be used where an
+ ** [unprotected sqlite3_value] object is required, so either
+ ** kind of [sqlite3_value] object can be used with this interface.
  **
  ** If these routines are called from within the different thread
- ** than the one containing the application-defined function that recieved
+ ** than the one containing the application-defined function that received
  ** the [sqlite3_context] pointer, the results are undefined.
- **
+ */
- ** INVARIANTS:
+ SQLITE_API void sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
- **
+ SQLITE_API void sqlite3_result_double(sqlite3_context*, double);
- ** {F16403} The default return value from any SQL function is NULL.
+ SQLITE_API void sqlite3_result_error(sqlite3_context*, const char*, int);
- **
+ SQLITE_API void sqlite3_result_error16(sqlite3_context*, const void*, int);
- ** {F16406} The [sqlite3_result_blob(C,V,N,D)] interface changes the
+ SQLITE_API void sqlite3_result_error_toobig(sqlite3_context*);
- **          return value of function C to be a blob that is N bytes
+ SQLITE_API void sqlite3_result_error_nomem(sqlite3_context*);
- **          in length and with content pointed to by V.
+ SQLITE_API void sqlite3_result_error_code(sqlite3_context*, int);
- **
+ SQLITE_API void sqlite3_result_int(sqlite3_context*, int);
- ** {F16409} The [sqlite3_result_double(C,V)] interface changes the
+ SQLITE_API void sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
- **          return value of function C to be the floating point value V.
+ SQLITE_API void sqlite3_result_null(sqlite3_context*);
- **
+ SQLITE_API void sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
- ** {F16412} The [sqlite3_result_error(C,V,N)] interface changes the return
+ SQLITE_API void sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
- **          value of function C to be an exception with error code
+ SQLITE_API void sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
- **          [SQLITE_ERROR] and a UTF8 error message copied from V up to the
+ SQLITE_API void sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
- **          first zero byte or until N bytes are read if N is positive.
+ SQLITE_API void sqlite3_result_value(sqlite3_context*, sqlite3_value*);
- **
+ SQLITE_API void sqlite3_result_zeroblob(sqlite3_context*, int n);
- ** {F16415} The [sqlite3_result_error16(C,V,N)] interface changes the return
- **          value of function C to be an exception with error code
- **          [SQLITE_ERROR] and a UTF16 native byte order error message
- **          copied from V up to the first zero terminator or until N bytes
- **          are read if N is positive.
- **
- ** {F16418} The [sqlite3_result_error_toobig(C)] interface changes the return
- **          value of the function C to be an exception with error code
- **          [SQLITE_TOOBIG] and an appropriate error message.
- **
- ** {F16421} The [sqlite3_result_error_nomem(C)] interface changes the return
- **          value of the function C to be an exception with error code
- **          [SQLITE_NOMEM] and an appropriate error message.
- **
- ** {F16424} The [sqlite3_result_error_code(C,E)] interface changes the return
- **          value of the function C to be an exception with error code E.
- **          The error message text is unchanged.
- **
- ** {F16427} The [sqlite3_result_int(C,V)] interface changes the
- **          return value of function C to be the 32-bit integer value V.
- **
- ** {F16430} The [sqlite3_result_int64(C,V)] interface changes the
- **          return value of function C to be the 64-bit integer value V.
- **
- ** {F16433} The [sqlite3_result_null(C)] interface changes the
- **          return value of function C to be NULL.
- **
- ** {F16436} The [sqlite3_result_text(C,V,N,D)] interface changes the
- **          return value of function C to be the UTF8 string
- **          V up through the first zero or until N bytes are read if N
- **          is positive.
- **
- ** {F16439} The [sqlite3_result_text16(C,V,N,D)] interface changes the
- **          return value of function C to be the UTF16 native byte order
- **          string  V up through the first zero or until N bytes are read if N
- **          is positive.
- **
- ** {F16442} The [sqlite3_result_text16be(C,V,N,D)] interface changes the
- **          return value of function C to be the UTF16 big-endian
- **          string  V up through the first zero or until N bytes are read if N
- **          is positive.
- **
- ** {F16445} The [sqlite3_result_text16le(C,V,N,D)] interface changes the
- **          return value of function C to be the UTF16 little-endian
- **          string  V up through the first zero or until N bytes are read if N
- **          is positive.
- **
- ** {F16448} The [sqlite3_result_value(C,V)] interface changes the
- **          return value of function C to be [sqlite3_value] object V.
- **
- ** {F16451} The [sqlite3_result_zeroblob(C,N)] interface changes the
- **          return value of function C to be an N-byte blob of all zeros.
- **
- ** {F16454} The [sqlite3_result_error()] and [sqlite3_result_error16()]
- **          interfaces make a copy of their error message strings before
- **          returning.
- **
- ** {F16457} If the D destructor parameter to [sqlite3_result_blob(C,V,N,D)],
- **          [sqlite3_result_text(C,V,N,D)], [sqlite3_result_text16(C,V,N,D)],
- **          [sqlite3_result_text16be(C,V,N,D)], or
- **          [sqlite3_result_text16le(C,V,N,D)] is the constant [SQLITE_STATIC]
- **          then no destructor is ever called on the pointer V and SQLite
- **          assumes that V is immutable.
- **
- ** {F16460} If the D destructor parameter to [sqlite3_result_blob(C,V,N,D)],
- **          [sqlite3_result_text(C,V,N,D)], [sqlite3_result_text16(C,V,N,D)],
- **          [sqlite3_result_text16be(C,V,N,D)], or
- **          [sqlite3_result_text16le(C,V,N,D)] is the constant
- **          [SQLITE_TRANSIENT] then the interfaces makes a copy of the
- **          content of V and retains the copy.
- **
- ** {F16463} If the D destructor parameter to [sqlite3_result_blob(C,V,N,D)],
- **          [sqlite3_result_text(C,V,N,D)], [sqlite3_result_text16(C,V,N,D)],
- **          [sqlite3_result_text16be(C,V,N,D)], or
- **          [sqlite3_result_text16le(C,V,N,D)] is some value other than
- **          the constants [SQLITE_STATIC] and [SQLITE_TRANSIENT] then
- **          SQLite will invoke the destructor D with V as its only argument
- **          when it has finished with the V value.
- */
- void sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
- void sqlite3_result_double(sqlite3_context*, double);
- void sqlite3_result_error(sqlite3_context*, const char*, int);
- void sqlite3_result_error16(sqlite3_context*, const void*, int);
- void sqlite3_result_error_toobig(sqlite3_context*);
- void sqlite3_result_error_nomem(sqlite3_context*);
- void sqlite3_result_error_code(sqlite3_context*, int);
- void sqlite3_result_int(sqlite3_context*, int);
- void sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
- void sqlite3_result_null(sqlite3_context*);
- void sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
- void sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
- void sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
- void sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
- void sqlite3_result_value(sqlite3_context*, sqlite3_value*);
- void sqlite3_result_zeroblob(sqlite3_context*, int n);
  /*
- ** CAPI3REF: Define New Collating Sequences {F16600}
+ ** CAPI3REF: Define New Collating Sequences
  **
- ** These functions are used to add new collation sequences to the
+ ** ^These functions add, remove, or modify a [collation] associated
- ** [sqlite3*] handle specified as the first argument.
+ ** with the [database connection] specified as the first argument.
  **
- ** The name of the new collation sequence is specified as a UTF-8 string
+ ** ^The name of the collation is a UTF-8 string
  ** for sqlite3_create_collation() and sqlite3_create_collation_v2()
- ** and a UTF-16 string for sqlite3_create_collation16(). In all cases
+ ** and a UTF-16 string in native byte order for sqlite3_create_collation16().
- ** the name is passed as the second function argument.
+ ** ^Collation names that compare equal according to [sqlite3_strnicmp()] are
+ ** considered to be the same name.
+ **
+ ** ^(The third argument (eTextRep) must be one of the constants:
+ ** <ul>
+ ** <li> [SQLITE_UTF8],
+ ** <li> [SQLITE_UTF16LE],
+ ** <li> [SQLITE_UTF16BE],
+ ** <li> [SQLITE_UTF16], or
+ ** <li> [SQLITE_UTF16_ALIGNED].
+ ** </ul>)^
+ ** ^The eTextRep argument determines the encoding of strings passed
+ ** to the collating function callback, xCallback.
+ ** ^The [SQLITE_UTF16] and [SQLITE_UTF16_ALIGNED] values for eTextRep
+ ** force strings to be UTF16 with native byte order.
+ ** ^The [SQLITE_UTF16_ALIGNED] value for eTextRep forces strings to begin
+ ** on an even byte address.
+ **
+ ** ^The fourth argument, pArg, is an application data pointer that is passed
+ ** through as the first argument to the collating function callback.
+ **
+ ** ^The fifth argument, xCallback, is a pointer to the collating function.
+ ** ^Multiple collating functions can be registered using the same name but
+ ** with different eTextRep parameters and SQLite will use whichever
+ ** function requires the least amount of data transformation.
+ ** ^If the xCallback argument is NULL then the collating function is
+ ** deleted.  ^When all collating functions having the same name are deleted,
+ ** that collation is no longer usable.
+ **
+ ** ^The collating function callback is invoked with a copy of the pArg
+ ** application data pointer and with two strings in the encoding specified
+ ** by the eTextRep argument.  The collating function must return an
+ ** integer that is negative, zero, or positive
+ ** if the first string is less than, equal to, or greater than the second,
+ ** respectively.  A collating function must always return the same answer
+ ** given the same inputs.  If two or more collating functions are registered
+ ** to the same collation name (using different eTextRep values) then all
+ ** must give an equivalent answer when invoked with equivalent strings.
+ ** The collating function must obey the following properties for all
+ ** strings A, B, and C:
+ **
+ ** <ol>
+ ** <li> If A==B then B==A.
+ ** <li> If A==B and B==C then A==C.
+ ** <li> If A&lt;B THEN B&gt;A.
+ ** <li> If A&lt;B and B&lt;C then A&lt;C.
+ ** </ol>
+ **
+ ** If a collating function fails any of the above constraints and that
+ ** collating function is  registered and used, then the behavior of SQLite
+ ** is undefined.
+ **
+ ** ^The sqlite3_create_collation_v2() works like sqlite3_create_collation()
+ ** with the addition that the xDestroy callback is invoked on pArg when
+ ** the collating function is deleted.
+ ** ^Collating functions are deleted when they are overridden by later
+ ** calls to the collation creation functions or when the
+ ** [database connection] is closed using [sqlite3_close()].
+ **
+ ** ^The xDestroy callback is <u>not</u> called if the
+ ** sqlite3_create_collation_v2() function fails.  Applications that invoke
+ ** sqlite3_create_collation_v2() with a non-NULL xDestroy argument should
+ ** check the return code and dispose of the application data pointer
+ ** themselves rather than expecting SQLite to deal with it for them.
+ ** This is different from every other SQLite interface.  The inconsistency
+ ** is unfortunate but cannot be changed without breaking backwards
+ ** compatibility.
  **
- ** The third argument may be one of the constants [SQLITE_UTF8],
+ ** See also:  [sqlite3_collation_needed()] and [sqlite3_collation_needed16()].
- ** [SQLITE_UTF16LE] or [SQLITE_UTF16BE], indicating that the user-supplied
- ** routine expects to be passed pointers to strings encoded using UTF-8,
- ** UTF-16 little-endian or UTF-16 big-endian respectively. The
- ** third argument might also be [SQLITE_UTF16_ALIGNED] to indicate that
- ** the routine expects pointers to 16-bit word aligned strings
- ** of UTF16 in the native byte order of the host computer.
- **
- ** A pointer to the user supplied routine must be passed as the fifth
- ** argument.  If it is NULL, this is the same as deleting the collation
- ** sequence (so that SQLite cannot call it anymore).
- ** Each time the application
- ** supplied function is invoked, it is passed a copy of the void* passed as
- ** the fourth argument to sqlite3_create_collation() or
- ** sqlite3_create_collation16() as its first parameter.
- **
- ** The remaining arguments to the application-supplied routine are two strings,
- ** each represented by a (length, data) pair and encoded in the encoding
- ** that was passed as the third argument when the collation sequence was
- ** registered. {END} The application defined collation routine should
- ** return negative, zero or positive if
- ** the first string is less than, equal to, or greater than the second
- ** string. i.e. (STRING1 - STRING2).
- **
- ** The sqlite3_create_collation_v2() works like sqlite3_create_collation()
- ** excapt that it takes an extra argument which is a destructor for
- ** the collation.  The destructor is called when the collation is
- ** destroyed and is passed a copy of the fourth parameter void* pointer
- ** of the sqlite3_create_collation_v2().
- ** Collations are destroyed when
- ** they are overridden by later calls to the collation creation functions
- ** or when the [sqlite3*] database handle is closed using [sqlite3_close()].
- **
- ** INVARIANTS:
- **
- ** {F16603} A successful call to the
- **          [sqlite3_create_collation_v2(B,X,E,P,F,D)] interface
- **          registers function F as the comparison function used to
- **          implement collation X on [database connection] B for
- **          databases having encoding E.
- **
- ** {F16604} SQLite understands the X parameter to
- **          [sqlite3_create_collation_v2(B,X,E,P,F,D)] as a zero-terminated
- **          UTF-8 string in which case is ignored for ASCII characters and
- **          is significant for non-ASCII characters.
- **
- ** {F16606} Successive calls to [sqlite3_create_collation_v2(B,X,E,P,F,D)]
- **          with the same values for B, X, and E, override prior values
- **          of P, F, and D.
- **
- ** {F16609} The destructor D in [sqlite3_create_collation_v2(B,X,E,P,F,D)]
- **          is not NULL then it is called with argument P when the
- **          collating function is dropped by SQLite.
- **
- ** {F16612} A collating function is dropped when it is overloaded.
- **
- ** {F16615} A collating function is dropped when the database connection
- **          is closed using [sqlite3_close()].
- **
- ** {F16618} The pointer P in [sqlite3_create_collation_v2(B,X,E,P,F,D)]
- **          is passed through as the first parameter to the comparison
- **          function F for all subsequent invocations of F.
- **
- ** {F16621} A call to [sqlite3_create_collation(B,X,E,P,F)] is exactly
- **          the same as a call to [sqlite3_create_collation_v2()] with
- **          the same parameters and a NULL destructor.
- **
- ** {F16624} Following a [sqlite3_create_collation_v2(B,X,E,P,F,D)],
- **          SQLite uses the comparison function F for all text comparison
- **          operations on [database connection] B on text values that
- **          use the collating sequence name X.
- **
- ** {F16627} The [sqlite3_create_collation16(B,X,E,P,F)] works the same
- **          as [sqlite3_create_collation(B,X,E,P,F)] except that the
- **          collation name X is understood as UTF-16 in native byte order
- **          instead of UTF-8.
- **
- ** {F16630} When multiple comparison functions are available for the same
- **          collating sequence, SQLite chooses the one whose text encoding
- **          requires the least amount of conversion from the default
- **          text encoding of the database.
  */
- int sqlite3_create_collation(
+ SQLITE_API int sqlite3_create_collation(
    sqlite3*,
    const char *zName,
    int eTextRep,
-   void*,
+   void *pArg,
    int(*xCompare)(void*,int,const void*,int,const void*)
  );
- int sqlite3_create_collation_v2(
+ SQLITE_API int sqlite3_create_collation_v2(
    sqlite3*,
    const char *zName,
    int eTextRep,
-   void*,
+   void *pArg,
    int(*xCompare)(void*,int,const void*,int,const void*),
    void(*xDestroy)(void*)
  );
- int sqlite3_create_collation16(
+ SQLITE_API int sqlite3_create_collation16(
    sqlite3*,
-   const char *zName,
+   const void *zName,
    int eTextRep,
-   void*,
+   void *pArg,
    int(*xCompare)(void*,int,const void*,int,const void*)
  );
  /*
- ** CAPI3REF: Collation Needed Callbacks {F16700}
+ ** CAPI3REF: Collation Needed Callbacks
  **
- ** To avoid having to register all collation sequences before a database
+ ** ^To avoid having to register all collation sequences before a database
  ** can be used, a single callback function may be registered with the
- ** database handle to be called whenever an undefined collation sequence is
+ ** [database connection] to be invoked whenever an undefined collation
- ** required.
+ ** sequence is required.
  **
- ** If the function is registered using the sqlite3_collation_needed() API,
+ ** ^If the function is registered using the sqlite3_collation_needed() API,
  ** then it is passed the names of undefined collation sequences as strings
- ** encoded in UTF-8. {F16703} If sqlite3_collation_needed16() is used, the names
+ ** encoded in UTF-8. ^If sqlite3_collation_needed16() is used,
- ** are passed as UTF-16 in machine native byte order. A call to either
+ ** the names are passed as UTF-16 in machine native byte order.
- ** function replaces any existing callback.
+ ** ^A call to either function replaces the existing collation-needed callback.
  **
- ** When the callback is invoked, the first argument passed is a copy
+ ** ^(When the callback is invoked, the first argument passed is a copy
  ** of the second argument to sqlite3_collation_needed() or
  ** sqlite3_collation_needed16().  The second argument is the database
- ** handle.  The third argument is one of [SQLITE_UTF8],
+ ** connection.  The third argument is one of [SQLITE_UTF8], [SQLITE_UTF16BE],
- ** [SQLITE_UTF16BE], or [SQLITE_UTF16LE], indicating the most
+ ** or [SQLITE_UTF16LE], indicating the most desirable form of the collation
- ** desirable form of the collation sequence function required.
+ ** sequence function required.  The fourth parameter is the name of the
- ** The fourth parameter is the name of the
+ ** required collation sequence.)^
- ** required collation sequence.
  **
  ** The callback function should register the desired collation using
  ** [sqlite3_create_collation()], [sqlite3_create_collation16()], or
  ** [sqlite3_create_collation_v2()].
- **
- ** INVARIANTS:
- **
- ** {F16702} A successful call to [sqlite3_collation_needed(D,P,F)]
- **          or [sqlite3_collation_needed16(D,P,F)] causes
- **          the [database connection] D to invoke callback F with first
- **          parameter P whenever it needs a comparison function for a
- **          collating sequence that it does not know about.
- **
- ** {F16704} Each successful call to [sqlite3_collation_needed()] or
- **          [sqlite3_collation_needed16()] overrides the callback registered
- **          on the same [database connection] by prior calls to either
- **          interface.
- **
- ** {F16706} The name of the requested collating function passed in the
- **          4th parameter to the callback is in UTF-8 if the callback
- **          was registered using [sqlite3_collation_needed()] and
- **          is in UTF-16 native byte order if the callback was
- **          registered using [sqlite3_collation_needed16()].
- **
- **
  */
- int sqlite3_collation_needed(
+ SQLITE_API int sqlite3_collation_needed(
    sqlite3*,
    void*,
    void(*)(void*,sqlite3*,int eTextRep,const char*)
  );
- int sqlite3_collation_needed16(
+ SQLITE_API int sqlite3_collation_needed16(
    sqlite3*,
    void*,
    void(*)(void*,sqlite3*,int eTextRep,const void*)
  );
+ #ifdef SQLITE_HAS_CODEC
  /*
  ** Specify the key for an encrypted database.  This routine should be
  ** called right after sqlite3_open().
- Line 4081  int sqlite3_collation_needed16(
+ Line 4528  int sqlite3_collation_needed16(
  ** The code to implement this API is not available in the public release
  ** of SQLite.
  */
- int sqlite3_key(
+ SQLITE_API int sqlite3_key(
+   sqlite3 *db,                   /* Database to be rekeyed */
+   const void *pKey, int nKey     /* The key */
+ );
+ SQLITE_API int sqlite3_key_v2(
    sqlite3 *db,                   /* Database to be rekeyed */
+   const char *zDbName,           /* Name of the database */
    const void *pKey, int nKey     /* The key */
  );
- Line 4094  int sqlite3_key(
+ Line 4546  int sqlite3_key(
  ** The code to implement this API is not available in the public release
  ** of SQLite.
  */
- int sqlite3_rekey(
+ SQLITE_API int sqlite3_rekey(
    sqlite3 *db,                   /* Database to be rekeyed */
    const void *pKey, int nKey     /* The new key */
  );
+ SQLITE_API int sqlite3_rekey_v2(
+   sqlite3 *db,                   /* Database to be rekeyed */
+   const char *zDbName,           /* Name of the database */
+   const void *pKey, int nKey     /* The new key */
+ );
  /*
- ** CAPI3REF:  Suspend Execution For A Short Time {F10530}
+ ** Specify the activation key for a SEE database.  Unless
+ ** activated, none of the SEE routines will work.
+ */
+ SQLITE_API void sqlite3_activate_see(
+   const char *zPassPhrase        /* Activation phrase */
+ );
+ #endif
+ #ifdef SQLITE_ENABLE_CEROD
+ /*
+ ** Specify the activation key for a CEROD database.  Unless
+ ** activated, none of the CEROD routines will work.
+ */
+ SQLITE_API void sqlite3_activate_cerod(
+   const char *zPassPhrase        /* Activation phrase */
+ );
+ #endif
+ /*
+ ** CAPI3REF: Suspend Execution For A Short Time
  **
- ** The sqlite3_sleep() function
+ ** The sqlite3_sleep() function causes the current thread to suspend execution
- ** causes the current thread to suspend execution
  ** for at least a number of milliseconds specified in its parameter.
  **
  ** If the operating system does not support sleep requests with
  ** millisecond time resolution, then the time will be rounded up to
  ** the nearest second. The number of milliseconds of sleep actually
  ** requested from the operating system is returned.
  **
- ** SQLite implements this interface by calling the xSleep()
+ ** ^SQLite implements this interface by calling the xSleep()
- ** method of the default [sqlite3_vfs] object.
+ ** method of the default [sqlite3_vfs] object.  If the xSleep() method
- **
+ ** of the default VFS is not implemented correctly, or not implemented at
- ** INVARIANTS:
+ ** all, then the behavior of sqlite3_sleep() may deviate from the description
+ ** in the previous paragraphs.
+ */
+ SQLITE_API int sqlite3_sleep(int);
+ /*
+ ** CAPI3REF: Name Of The Folder Holding Temporary Files
+ **
+ ** ^(If this global variable is made to point to a string which is
+ ** the name of a folder (a.k.a. directory), then all temporary files
+ ** created by SQLite when using a built-in [sqlite3_vfs | VFS]
+ ** will be placed in that directory.)^  ^If this variable
+ ** is a NULL pointer, then SQLite performs a search for an appropriate
+ ** temporary file directory.
+ **
+ ** It is not safe to read or modify this variable in more than one
+ ** thread at a time.  It is not safe to read or modify this variable
+ ** if a [database connection] is being used at the same time in a separate
+ ** thread.
+ ** It is intended that this variable be set once
+ ** as part of process initialization and before any SQLite interface
+ ** routines have been called and that this variable remain unchanged
+ ** thereafter.
  **
- ** {F10533} The [sqlite3_sleep(M)] interface invokes the xSleep
+ ** ^The [temp_store_directory pragma] may modify this variable and cause
- **          method of the default [sqlite3_vfs|VFS] in order to
+ ** it to point to memory obtained from [sqlite3_malloc].  ^Furthermore,
- **          suspend execution of the current thread for at least
+ ** the [temp_store_directory pragma] always assumes that any string
- **          M milliseconds.
+ ** that this variable points to is held in memory obtained from
+ ** [sqlite3_malloc] and the pragma may attempt to free that memory
+ ** using [sqlite3_free].
+ ** Hence, if this variable is modified directly, either it should be
+ ** made NULL or made to point to memory obtained from [sqlite3_malloc]
+ ** or else the use of the [temp_store_directory pragma] should be avoided.
+ **
+ ** <b>Note to Windows Runtime users:</b>  The temporary directory must be set
+ ** prior to calling [sqlite3_open] or [sqlite3_open_v2].  Otherwise, various
+ ** features that require the use of temporary files may fail.  Here is an
+ ** example of how to do this using C++ with the Windows Runtime:
  **
- ** {F10536} The [sqlite3_sleep(M)] interface returns the number of
+ ** <blockquote><pre>
- **          milliseconds of sleep actually requested of the operating
+ ** LPCWSTR zPath = Windows::Storage::ApplicationData::Current->
- **          system, which might be larger than the parameter M.
+ ** &nbsp;     TemporaryFolder->Path->Data();
+ ** char zPathBuf&#91;MAX_PATH + 1&#93;;
+ ** memset(zPathBuf, 0, sizeof(zPathBuf));
+ ** WideCharToMultiByte(CP_UTF8, 0, zPath, -1, zPathBuf, sizeof(zPathBuf),
+ ** &nbsp;     NULL, NULL);
+ ** sqlite3_temp_directory = sqlite3_mprintf("%s", zPathBuf);
+ ** </pre></blockquote>
  */
- int sqlite3_sleep(int);
+ SQLITE_API SQLITE_EXTERN char *sqlite3_temp_directory;
  /*
- ** CAPI3REF:  Name Of The Folder Holding Temporary Files {F10310}
+ ** CAPI3REF: Name Of The Folder Holding Database Files
  **
- ** If this global variable is made to point to a string which is
+ ** ^(If this global variable is made to point to a string which is
- ** the name of a folder (a.ka. directory), then all temporary files
+ ** the name of a folder (a.k.a. directory), then all database files
- ** created by SQLite will be placed in that directory.  If this variable
+ ** specified with a relative pathname and created or accessed by
- ** is NULL pointer, then SQLite does a search for an appropriate temporary
+ ** SQLite when using a built-in windows [sqlite3_vfs | VFS] will be assumed
- ** file directory.
+ ** to be relative to that directory.)^ ^If this variable is a NULL
- **
+ ** pointer, then SQLite assumes that all database files specified
- ** It is not safe to modify this variable once a database connection
+ ** with a relative pathname are relative to the current directory
- ** has been opened.  It is intended that this variable be set once
+ ** for the process.  Only the windows VFS makes use of this global
+ ** variable; it is ignored by the unix VFS.
+ **
+ ** Changing the value of this variable while a database connection is
+ ** open can result in a corrupt database.
+ **
+ ** It is not safe to read or modify this variable in more than one
+ ** thread at a time.  It is not safe to read or modify this variable
+ ** if a [database connection] is being used at the same time in a separate
+ ** thread.
+ ** It is intended that this variable be set once
  ** as part of process initialization and before any SQLite interface
- ** routines have been call and remain unchanged thereafter.
+ ** routines have been called and that this variable remain unchanged
+ ** thereafter.
+ **
+ ** ^The [data_store_directory pragma] may modify this variable and cause
+ ** it to point to memory obtained from [sqlite3_malloc].  ^Furthermore,
+ ** the [data_store_directory pragma] always assumes that any string
+ ** that this variable points to is held in memory obtained from
+ ** [sqlite3_malloc] and the pragma may attempt to free that memory
+ ** using [sqlite3_free].
+ ** Hence, if this variable is modified directly, either it should be
+ ** made NULL or made to point to memory obtained from [sqlite3_malloc]
+ ** or else the use of the [data_store_directory pragma] should be avoided.
  */
- SQLITE_EXTERN char *sqlite3_temp_directory;
+ SQLITE_API SQLITE_EXTERN char *sqlite3_data_directory;
  /*
- ** CAPI3REF:  Test To See If The Database Is In Auto-Commit Mode {F12930}
+ ** CAPI3REF: Test For Auto-Commit Mode
+ ** KEYWORDS: {autocommit mode}
  **
- ** The sqlite3_get_autocommit() interfaces returns non-zero or
+ ** ^The sqlite3_get_autocommit() interface returns non-zero or
  ** zero if the given database connection is or is not in autocommit mode,
- ** respectively.   Autocommit mode is on
+ ** respectively.  ^Autocommit mode is on by default.
- ** by default.  Autocommit mode is disabled by a [BEGIN] statement.
+ ** ^Autocommit mode is disabled by a [BEGIN] statement.
- ** Autocommit mode is reenabled by a [COMMIT] or [ROLLBACK].
+ ** ^Autocommit mode is re-enabled by a [COMMIT] or [ROLLBACK].
  **
  ** If certain kinds of errors occur on a statement within a multi-statement
- ** transactions (errors including [SQLITE_FULL], [SQLITE_IOERR],
+ ** transaction (errors including [SQLITE_FULL], [SQLITE_IOERR],
  ** [SQLITE_NOMEM], [SQLITE_BUSY], and [SQLITE_INTERRUPT]) then the
  ** transaction might be rolled back automatically.  The only way to
- ** find out if SQLite automatically rolled back the transaction after
+ ** find out whether SQLite automatically rolled back the transaction after
  ** an error is to use this function.
  **
- ** INVARIANTS:
+ ** If another thread changes the autocommit status of the database
- **
+ ** connection while this routine is running, then the return value
- ** {F12931} The [sqlite3_get_autocommit(D)] interface returns non-zero or
+ ** is undefined.
- **          zero if the [database connection] D is or is not in autocommit
+ */
- **          mode, respectively.
+ SQLITE_API int sqlite3_get_autocommit(sqlite3*);
- **
- ** {F12932} Autocommit mode is on by default.
+ /*
+ ** CAPI3REF: Find The Database Handle Of A Prepared Statement
  **
- ** {F12933} Autocommit mode is disabled by a successful [BEGIN] statement.
+ ** ^The sqlite3_db_handle interface returns the [database connection] handle
+ ** to which a [prepared statement] belongs.  ^The [database connection]
+ ** returned by sqlite3_db_handle is the same [database connection]
+ ** that was the first argument
+ ** to the [sqlite3_prepare_v2()] call (or its variants) that was used to
+ ** create the statement in the first place.
+ */
+ SQLITE_API sqlite3 *sqlite3_db_handle(sqlite3_stmt*);
+ /*
+ ** CAPI3REF: Return The Filename For A Database Connection
  **
- ** {F12934} Autocommit mode is enabled by a successful [COMMIT] or [ROLLBACK]
+ ** ^The sqlite3_db_filename(D,N) interface returns a pointer to a filename
- **          statement.
+ ** associated with database N of connection D.  ^The main database file
- **
+ ** has the name "main".  If there is no attached database N on the database
+ ** connection D, or if database N is a temporary or in-memory database, then
+ ** a NULL pointer is returned.
  **
- ** LIMITATIONS:
+ ** ^The filename returned by this function is the output of the
- ***
+ ** xFullPathname method of the [VFS].  ^In other words, the filename
- ** {U12936} If another thread changes the autocommit status of the database
+ ** will be an absolute pathname, even if the filename used
- **          connection while this routine is running, then the return value
+ ** to open the database originally was a URI or relative pathname.
- **          is undefined.
  */
- int sqlite3_get_autocommit(sqlite3*);
+ SQLITE_API const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName);
  /*
- ** CAPI3REF:  Find The Database Handle Of A Prepared Statement {F13120}
+ ** CAPI3REF: Determine if a database is read-only
  **
- ** The sqlite3_db_handle interface
+ ** ^The sqlite3_db_readonly(D,N) interface returns 1 if the database N
- ** returns the [sqlite3*] database handle to which a
+ ** of connection D is read-only, 0 if it is read/write, or -1 if N is not
- ** [prepared statement] belongs.
+ ** the name of a database on connection D.
- ** The database handle returned by sqlite3_db_handle
+ */
- ** is the same database handle that was
+ SQLITE_API int sqlite3_db_readonly(sqlite3 *db, const char *zDbName);
- ** the first argument to the [sqlite3_prepare_v2()] or its variants
- ** that was used to create the statement in the first place.
+ /*
+ ** CAPI3REF: Find the next prepared statement
  **
- ** INVARIANTS:
+ ** ^This interface returns a pointer to the next [prepared statement] after
+ ** pStmt associated with the [database connection] pDb.  ^If pStmt is NULL
+ ** then this interface returns a pointer to the first prepared statement
+ ** associated with the database connection pDb.  ^If no prepared statement
+ ** satisfies the conditions of this routine, it returns NULL.
  **
- ** {F13123} The [sqlite3_db_handle(S)] interface returns a pointer
+ ** The [database connection] pointer D in a call to
- **          to the [database connection] associated with
+ ** [sqlite3_next_stmt(D,S)] must refer to an open database
- **          [prepared statement] S.
+ ** connection and in particular must not be a NULL pointer.
  */
- sqlite3 *sqlite3_db_handle(sqlite3_stmt*);
+ SQLITE_API sqlite3_stmt *sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt);
  /*
- ** CAPI3REF: Commit And Rollback Notification Callbacks {F12950}
+ ** CAPI3REF: Commit And Rollback Notification Callbacks
  **
- ** The sqlite3_commit_hook() interface registers a callback
+ ** ^The sqlite3_commit_hook() interface registers a callback
- ** function to be invoked whenever a transaction is committed.
+ ** function to be invoked whenever a transaction is [COMMIT | committed].
- ** Any callback set by a previous call to sqlite3_commit_hook()
+ ** ^Any callback set by a previous call to sqlite3_commit_hook()
  ** for the same database connection is overridden.
- ** The sqlite3_rollback_hook() interface registers a callback
+ ** ^The sqlite3_rollback_hook() interface registers a callback
- ** function to be invoked whenever a transaction is committed.
+ ** function to be invoked whenever a transaction is [ROLLBACK | rolled back].
- ** Any callback set by a previous call to sqlite3_commit_hook()
+ ** ^Any callback set by a previous call to sqlite3_rollback_hook()
  ** for the same database connection is overridden.
- ** The pArg argument is passed through
+ ** ^The pArg argument is passed through to the callback.
- ** to the callback.  If the callback on a commit hook function
+ ** ^If the callback on a commit hook function returns non-zero,
- ** returns non-zero, then the commit is converted into a rollback.
+ ** then the commit is converted into a rollback.
  **
- ** If another function was previously registered, its
+ ** ^The sqlite3_commit_hook(D,C,P) and sqlite3_rollback_hook(D,C,P) functions
- ** pArg value is returned.  Otherwise NULL is returned.
+ ** return the P argument from the previous call of the same function
- **
+ ** on the same [database connection] D, or NULL for
- ** Registering a NULL function disables the callback.
+ ** the first call for each function on D.
+ **
+ ** The commit and rollback hook callbacks are not reentrant.
+ ** The callback implementation must not do anything that will modify
+ ** the database connection that invoked the callback.  Any actions
+ ** to modify the database connection must be deferred until after the
+ ** completion of the [sqlite3_step()] call that triggered the commit
+ ** or rollback hook in the first place.
+ ** Note that running any other SQL statements, including SELECT statements,
+ ** or merely calling [sqlite3_prepare_v2()] and [sqlite3_step()] will modify
+ ** the database connections for the meaning of "modify" in this paragraph.
+ **
+ ** ^Registering a NULL function disables the callback.
+ **
+ ** ^When the commit hook callback routine returns zero, the [COMMIT]
+ ** operation is allowed to continue normally.  ^If the commit hook
+ ** returns non-zero, then the [COMMIT] is converted into a [ROLLBACK].
+ ** ^The rollback hook is invoked on a rollback that results from a commit
+ ** hook returning non-zero, just as it would be with any other rollback.
  **
- ** For the purposes of this API, a transaction is said to have been
+ ** ^For the purposes of this API, a transaction is said to have been
  ** rolled back if an explicit "ROLLBACK" statement is executed, or
  ** an error or constraint causes an implicit rollback to occur.
- ** The rollback callback is not invoked if a transaction is
+ ** ^The rollback callback is not invoked if a transaction is
  ** automatically rolled back because the database connection is closed.
- ** The rollback callback is not invoked if a transaction is
- ** rolled back because a commit callback returned non-zero.
- ** <todo> Check on this </todo>
- **
- ** These are experimental interfaces and are subject to change.
- **
- ** INVARIANTS:
- **
- ** {F12951} The [sqlite3_commit_hook(D,F,P)] interface registers the
- **          callback function F to be invoked with argument P whenever
- **          a transaction commits on [database connection] D.
- **
- ** {F12952} The [sqlite3_commit_hook(D,F,P)] interface returns the P
- **          argument from the previous call with the same
- **          [database connection ] D , or NULL on the first call
- **          for a particular [database connection] D.
  **
- ** {F12953} Each call to [sqlite3_commit_hook()] overwrites the callback
+ ** See also the [sqlite3_update_hook()] interface.
- **          registered by prior calls.
- **
- ** {F12954} If the F argument to [sqlite3_commit_hook(D,F,P)] is NULL
- **          then the commit hook callback is cancelled and no callback
- **          is invoked when a transaction commits.
- **
- ** {F12955} If the commit callback returns non-zero then the commit is
- **          converted into a rollback.
- **
- ** {F12961} The [sqlite3_rollback_hook(D,F,P)] interface registers the
- **          callback function F to be invoked with argument P whenever
- **          a transaction rolls back on [database connection] D.
- **
- ** {F12962} The [sqlite3_rollback_hook(D,F,P)] interface returns the P
- **          argument from the previous call with the same
- **          [database connection ] D , or NULL on the first call
- **          for a particular [database connection] D.
- **
- ** {F12963} Each call to [sqlite3_rollback_hook()] overwrites the callback
- **          registered by prior calls.
- **
- ** {F12964} If the F argument to [sqlite3_rollback_hook(D,F,P)] is NULL
- **          then the rollback hook callback is cancelled and no callback
- **          is invoked when a transaction rolls back.
  */
- void *sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
+ SQLITE_API void *sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
- void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
+ SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
  /*
- ** CAPI3REF: Data Change Notification Callbacks {F12970}
+ ** CAPI3REF: Data Change Notification Callbacks
- **
- ** The sqlite3_update_hook() interface
- ** registers a callback function with the database connection identified by the
- ** first argument to be invoked whenever a row is updated, inserted or deleted.
- ** Any callback set by a previous call to this function for the same
- ** database connection is overridden.
- **
- ** The second argument is a pointer to the function to invoke when a
- ** row is updated, inserted or deleted.
- ** The first argument to the callback is
- ** a copy of the third argument to sqlite3_update_hook().
- ** The second callback
- ** argument is one of [SQLITE_INSERT], [SQLITE_DELETE] or [SQLITE_UPDATE],
- ** depending on the operation that caused the callback to be invoked.
- ** The third and
- ** fourth arguments to the callback contain pointers to the database and
- ** table name containing the affected row.
- ** The final callback parameter is
- ** the rowid of the row.
- ** In the case of an update, this is the rowid after
- ** the update takes place.
  **
- ** The update hook is not invoked when internal system tables are
+ ** ^The sqlite3_update_hook() interface registers a callback function
- ** modified (i.e. sqlite_master and sqlite_sequence).
+ ** with the [database connection] identified by the first argument
- **
+ ** to be invoked whenever a row is updated, inserted or deleted.
- ** If another function was previously registered, its pArg value
+ ** ^Any callback set by a previous call to this function
- ** is returned.  Otherwise NULL is returned.
+ ** for the same database connection is overridden.
- **
- ** INVARIANTS:
- **
- ** {F12971} The [sqlite3_update_hook(D,F,P)] interface causes callback
- **          function F to be invoked with first parameter P whenever
- **          a table row is modified, inserted, or deleted on
- **          [database connection] D.
- **
- ** {F12973} The [sqlite3_update_hook(D,F,P)] interface returns the value
- **          of P for the previous call on the same [database connection] D,
- **          or NULL for the first call.
- **
- ** {F12975} If the update hook callback F in [sqlite3_update_hook(D,F,P)]
- **          is NULL then the no update callbacks are made.
- **
- ** {F12977} Each call to [sqlite3_update_hook(D,F,P)] overrides prior calls
- **          to the same interface on the same [database connection] D.
- **
- ** {F12979} The update hook callback is not invoked when internal system
- **          tables such as sqlite_master and sqlite_sequence are modified.
  **
- ** {F12981} The second parameter to the update callback
+ ** ^The second argument is a pointer to the function to invoke when a
- **          is one of [SQLITE_INSERT], [SQLITE_DELETE] or [SQLITE_UPDATE],
+ ** row is updated, inserted or deleted.
- **          depending on the operation that caused the callback to be invoked.
+ ** ^The first argument to the callback is a copy of the third argument
+ ** to sqlite3_update_hook().
+ ** ^The second callback argument is one of [SQLITE_INSERT], [SQLITE_DELETE],
+ ** or [SQLITE_UPDATE], depending on the operation that caused the callback
+ ** to be invoked.
+ ** ^The third and fourth arguments to the callback contain pointers to the
+ ** database and table name containing the affected row.
+ ** ^The final callback parameter is the [rowid] of the row.
+ ** ^In the case of an update, this is the [rowid] after the update takes place.
+ **
+ ** ^(The update hook is not invoked when internal system tables are
+ ** modified (i.e. sqlite_master and sqlite_sequence).)^
+ **
+ ** ^In the current implementation, the update hook
+ ** is not invoked when duplication rows are deleted because of an
+ ** [ON CONFLICT | ON CONFLICT REPLACE] clause.  ^Nor is the update hook
+ ** invoked when rows are deleted using the [truncate optimization].
+ ** The exceptions defined in this paragraph might change in a future
+ ** release of SQLite.
+ **
+ ** The update hook implementation must not do anything that will modify
+ ** the database connection that invoked the update hook.  Any actions
+ ** to modify the database connection must be deferred until after the
+ ** completion of the [sqlite3_step()] call that triggered the update hook.
+ ** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
+ ** database connections for the meaning of "modify" in this paragraph.
+ **
+ ** ^The sqlite3_update_hook(D,C,P) function
+ ** returns the P argument from the previous call
+ ** on the same [database connection] D, or NULL for
+ ** the first call on D.
  **
- ** {F12983} The third and fourth arguments to the callback contain pointers
+ ** See also the [sqlite3_commit_hook()] and [sqlite3_rollback_hook()]
- **          to zero-terminated UTF-8 strings which are the names of the
+ ** interfaces.
- **          database and table that is being updated.
- ** {F12985} The final callback parameter is the rowid of the row after
- **          the change occurs.
  */
- void *sqlite3_update_hook(
+ SQLITE_API void *sqlite3_update_hook(
    sqlite3*,
    void(*)(void *,int ,char const *,char const *,sqlite3_int64),
    void*
  );
  /*
- ** CAPI3REF:  Enable Or Disable Shared Pager Cache {F10330}
+ ** CAPI3REF: Enable Or Disable Shared Pager Cache
  **
- ** This routine enables or disables the sharing of the database cache
+ ** ^(This routine enables or disables the sharing of the database cache
- ** and schema data structures between connections to the same database.
+ ** and schema data structures between [database connection | connections]
- ** Sharing is enabled if the argument is true and disabled if the argument
+ ** to the same database. Sharing is enabled if the argument is true
- ** is false.
+ ** and disabled if the argument is false.)^
  **
- ** Cache sharing is enabled and disabled
+ ** ^Cache sharing is enabled and disabled for an entire process.
- ** for an entire process. {END} This is a change as of SQLite version 3.5.0.
+ ** This is a change as of SQLite version 3.5.0. In prior versions of SQLite,
- ** In prior versions of SQLite, sharing was
+ ** sharing was enabled or disabled for each thread separately.
- ** enabled or disabled for each thread separately.
  **
- ** The cache sharing mode set by this interface effects all subsequent
+ ** ^(The cache sharing mode set by this interface effects all subsequent
  ** calls to [sqlite3_open()], [sqlite3_open_v2()], and [sqlite3_open16()].
  ** Existing database connections continue use the sharing mode
- ** that was in effect at the time they were opened.
+ ** that was in effect at the time they were opened.)^
  **
- ** Virtual tables cannot be used with a shared cache.   When shared
+ ** ^(This routine returns [SQLITE_OK] if shared cache was enabled or disabled
- ** cache is enabled, the [sqlite3_create_module()] API used to register
+ ** successfully.  An [error code] is returned otherwise.)^
- ** virtual tables will always return an error.
  **
- ** This routine returns [SQLITE_OK] if shared cache was
+ ** ^Shared cache is disabled by default. But this might change in
- ** enabled or disabled successfully.  An [error code]
- ** is returned otherwise.
- **
- ** Shared cache is disabled by default. But this might change in
  ** future releases of SQLite.  Applications that care about shared
  ** cache setting should set it explicitly.
  **
- ** INVARIANTS:
+ ** This interface is threadsafe on processors where writing a
- **
+ ** 32-bit integer is atomic.
- ** {F10331} A successful invocation of [sqlite3_enable_shared_cache(B)]
- **          will enable or disable shared cache mode for any subsequently
- **          created [database connection] in the same process.
- **
- ** {F10336} When shared cache is enabled, the [sqlite3_create_module()]
- **          interface will always return an error.
- **
- ** {F10337} The [sqlite3_enable_shared_cache(B)] interface returns
- **          [SQLITE_OK] if shared cache was enabled or disabled successfully.
  **
- ** {F10339} Shared cache is disabled by default.
+ ** See Also:  [SQLite Shared-Cache Mode]
  */
- int sqlite3_enable_shared_cache(int);
+ SQLITE_API int sqlite3_enable_shared_cache(int);
  /*
- ** CAPI3REF:  Attempt To Free Heap Memory {F17340}
+ ** CAPI3REF: Attempt To Free Heap Memory
  **
- ** The sqlite3_release_memory() interface attempts to
+ ** ^The sqlite3_release_memory() interface attempts to free N bytes
- ** free N bytes of heap memory by deallocating non-essential memory
+ ** of heap memory by deallocating non-essential memory allocations
- ** allocations held by the database labrary. {END}  Memory used
+ ** held by the database library.   Memory used to cache database
- ** to cache database pages to improve performance is an example of
+ ** pages to improve performance is an example of non-essential memory.
- ** non-essential memory.  Sqlite3_release_memory() returns
+ ** ^sqlite3_release_memory() returns the number of bytes actually freed,
- ** the number of bytes actually freed, which might be more or less
+ ** which might be more or less than the amount requested.
- ** than the amount requested.
+ ** ^The sqlite3_release_memory() routine is a no-op returning zero
+ ** if SQLite is not compiled with [SQLITE_ENABLE_MEMORY_MANAGEMENT].
  **
- ** INVARIANTS:
+ ** See also: [sqlite3_db_release_memory()]
- **
- ** {F17341} The [sqlite3_release_memory(N)] interface attempts to
- **          free N bytes of heap memory by deallocating non-essential
- **          memory allocations held by the database labrary.
- **
- ** {F16342} The [sqlite3_release_memory(N)] returns the number
- **          of bytes actually freed, which might be more or less
- **          than the amount requested.
  */
- int sqlite3_release_memory(int);
+ SQLITE_API int sqlite3_release_memory(int);
  /*
- ** CAPI3REF:  Impose A Limit On Heap Size {F17350}
+ ** CAPI3REF: Free Memory Used By A Database Connection
- **
- ** The sqlite3_soft_heap_limit() interface
- ** places a "soft" limit on the amount of heap memory that may be allocated
- ** by SQLite. If an internal allocation is requested
- ** that would exceed the soft heap limit, [sqlite3_release_memory()] is
- ** invoked one or more times to free up some space before the allocation
- ** is made.
- **
- ** The limit is called "soft", because if
- ** [sqlite3_release_memory()] cannot
- ** free sufficient memory to prevent the limit from being exceeded,
- ** the memory is allocated anyway and the current operation proceeds.
  **
- ** A negative or zero value for N means that there is no soft heap limit and
+ ** ^The sqlite3_db_release_memory(D) interface attempts to free as much heap
- ** [sqlite3_release_memory()] will only be called when memory is exhausted.
+ ** memory as possible from database connection D. Unlike the
- ** The default value for the soft heap limit is zero.
+ ** [sqlite3_release_memory()] interface, this interface is effect even
+ ** when then [SQLITE_ENABLE_MEMORY_MANAGEMENT] compile-time option is
+ ** omitted.
  **
- ** SQLite makes a best effort to honor the soft heap limit.
+ ** See also: [sqlite3_release_memory()]
- ** But if the soft heap limit cannot honored, execution will
+ */
- ** continue without error or notification.  This is why the limit is
+ SQLITE_API int sqlite3_db_release_memory(sqlite3*);
- ** called a "soft" limit.  It is advisory only.
- **
+ /*
- ** Prior to SQLite version 3.5.0, this routine only constrained the memory
+ ** CAPI3REF: Impose A Limit On Heap Size
- ** allocated by a single thread - the same thread in which this routine
- ** runs.  Beginning with SQLite version 3.5.0, the soft heap limit is
- ** applied to all threads. The value specified for the soft heap limit
- ** is an upper bound on the total memory allocation for all threads. In
- ** version 3.5.0 there is no mechanism for limiting the heap usage for
- ** individual threads.
- **
- ** INVARIANTS:
- **
- ** {F16351} The [sqlite3_soft_heap_limit(N)] interface places a soft limit
- **          of N bytes on the amount of heap memory that may be allocated
- **          using [sqlite3_malloc()] or [sqlite3_realloc()] at any point
- **          in time.
  **
- ** {F16352} If a call to [sqlite3_malloc()] or [sqlite3_realloc()] would
+ ** ^The sqlite3_soft_heap_limit64() interface sets and/or queries the
- **          cause the total amount of allocated memory to exceed the
+ ** soft limit on the amount of heap memory that may be allocated by SQLite.
- **          soft heap limit, then [sqlite3_release_memory()] is invoked
+ ** ^SQLite strives to keep heap memory utilization below the soft heap
- **          in an attempt to reduce the memory usage prior to proceeding
+ ** limit by reducing the number of pages held in the page cache
- **          with the memory allocation attempt.
+ ** as heap memory usages approaches the limit.
+ ** ^The soft heap limit is "soft" because even though SQLite strives to stay
+ ** below the limit, it will exceed the limit rather than generate
+ ** an [SQLITE_NOMEM] error.  In other words, the soft heap limit
+ ** is advisory only.
  **
- ** {F16353} Calls to [sqlite3_malloc()] or [sqlite3_realloc()] that trigger
+ ** ^The return value from sqlite3_soft_heap_limit64() is the size of
- **          attempts to reduce memory usage through the soft heap limit
+ ** the soft heap limit prior to the call, or negative in the case of an
- **          mechanism continue even if the attempt to reduce memory
+ ** error.  ^If the argument N is negative
- **          usage is unsuccessful.
+ ** then no change is made to the soft heap limit.  Hence, the current
+ ** size of the soft heap limit can be determined by invoking
+ ** sqlite3_soft_heap_limit64() with a negative argument.
  **
- ** {F16354} A negative or zero value for N in a call to
+ ** ^If the argument N is zero then the soft heap limit is disabled.
- **          [sqlite3_soft_heap_limit(N)] means that there is no soft
- **          heap limit and [sqlite3_release_memory()] will only be
- **          called when memory is completely exhausted.
  **
- ** {F16355} The default value for the soft heap limit is zero.
+ ** ^(The soft heap limit is not enforced in the current implementation
+ ** if one or more of following conditions are true:
  **
- ** {F16358} Each call to [sqlite3_soft_heap_limit(N)] overrides the
+ ** <ul>
- **          values set by all prior calls.
+ ** <li> The soft heap limit is set to zero.
- */
+ ** <li> Memory accounting is disabled using a combination of the
- void sqlite3_soft_heap_limit(int);
+ **      [sqlite3_config]([SQLITE_CONFIG_MEMSTATUS],...) start-time option and
+ **      the [SQLITE_DEFAULT_MEMSTATUS] compile-time option.
+ ** <li> An alternative page cache implementation is specified using
+ **      [sqlite3_config]([SQLITE_CONFIG_PCACHE2],...).
+ ** <li> The page cache allocates from its own memory pool supplied
+ **      by [sqlite3_config]([SQLITE_CONFIG_PAGECACHE],...) rather than
+ **      from the heap.
+ ** </ul>)^
+ **
+ ** Beginning with SQLite version 3.7.3, the soft heap limit is enforced
+ ** regardless of whether or not the [SQLITE_ENABLE_MEMORY_MANAGEMENT]
+ ** compile-time option is invoked.  With [SQLITE_ENABLE_MEMORY_MANAGEMENT],
+ ** the soft heap limit is enforced on every memory allocation.  Without
+ ** [SQLITE_ENABLE_MEMORY_MANAGEMENT], the soft heap limit is only enforced
+ ** when memory is allocated by the page cache.  Testing suggests that because
+ ** the page cache is the predominate memory user in SQLite, most
+ ** applications will achieve adequate soft heap limit enforcement without
+ ** the use of [SQLITE_ENABLE_MEMORY_MANAGEMENT].
+ **
+ ** The circumstances under which SQLite will enforce the soft heap limit may
+ ** changes in future releases of SQLite.
+ */
+ SQLITE_API sqlite3_int64 sqlite3_soft_heap_limit64(sqlite3_int64 N);
+ /*
+ ** CAPI3REF: Deprecated Soft Heap Limit Interface
+ ** DEPRECATED
+ **
+ ** This is a deprecated version of the [sqlite3_soft_heap_limit64()]
+ ** interface.  This routine is provided for historical compatibility
+ ** only.  All new applications should use the
+ ** [sqlite3_soft_heap_limit64()] interface rather than this one.
+ */
+ SQLITE_API SQLITE_DEPRECATED void sqlite3_soft_heap_limit(int N);
  /*
- ** CAPI3REF:  Extract Metadata About A Column Of A Table {F12850}
+ ** CAPI3REF: Extract Metadata About A Column Of A Table
  **
- ** This routine
+ ** ^This routine returns metadata about a specific column of a specific
- ** returns meta-data about a specific column of a specific database
+ ** database table accessible using the [database connection] handle
- ** table accessible using the connection handle passed as the first function
+ ** passed as the first function argument.
- ** argument.
+ **
- **
+ ** ^The column is identified by the second, third and fourth parameters to
- ** The column is identified by the second, third and fourth parameters to
+ ** this function. ^The second parameter is either the name of the database
- ** this function. The second parameter is either the name of the database
+ ** (i.e. "main", "temp", or an attached database) containing the specified
- ** (i.e. "main", "temp" or an attached database) containing the specified
+ ** table or NULL. ^If it is NULL, then all attached databases are searched
- ** table or NULL. If it is NULL, then all attached databases are searched
+ ** for the table using the same algorithm used by the database engine to
- ** for the table using the same algorithm as the database engine uses to
  ** resolve unqualified table references.
  **
- ** The third and fourth parameters to this function are the table and column
+ ** ^The third and fourth parameters to this function are the table and column
  ** name of the desired column, respectively. Neither of these parameters
  ** may be NULL.
  **
- ** Meta information is returned by writing to the memory locations passed as
+ ** ^Metadata is returned by writing to the memory locations passed as the 5th
- ** the 5th and subsequent parameters to this function. Any of these
+ ** and subsequent parameters to this function. ^Any of these arguments may be
- ** arguments may be NULL, in which case the corresponding element of meta
+ ** NULL, in which case the corresponding element of metadata is omitted.
- ** information is ommitted.
  **
- ** <pre>
+ ** ^(<blockquote>
- ** Parameter     Output Type      Description
+ ** <table border="1">
- ** -----------------------------------
+ ** <tr><th> Parameter <th> Output<br>Type <th>  Description
  **
- **   5th         const char*      Data type
+ ** <tr><td> 5th <td> const char* <td> Data type
- **   6th         const char*      Name of the default collation sequence
+ ** <tr><td> 6th <td> const char* <td> Name of default collation sequence
- **   7th         int              True if the column has a NOT NULL constraint
+ ** <tr><td> 7th <td> int         <td> True if column has a NOT NULL constraint
- **   8th         int              True if the column is part of the PRIMARY KEY
+ ** <tr><td> 8th <td> int         <td> True if column is part of the PRIMARY KEY
- **   9th         int              True if the column is AUTOINCREMENT
+ ** <tr><td> 9th <td> int         <td> True if column is [AUTOINCREMENT]
- ** </pre>
+ ** </table>
- **
+ ** </blockquote>)^
  **
- ** The memory pointed to by the character pointers returned for the
+ ** ^The memory pointed to by the character pointers returned for the
  ** declaration type and collation sequence is valid only until the next
- ** call to any sqlite API function.
+ ** call to any SQLite API function.
  **
- ** If the specified table is actually a view, then an error is returned.
+ ** ^If the specified table is actually a view, an [error code] is returned.
  **
- ** If the specified column is "rowid", "oid" or "_rowid_" and an
+ ** ^If the specified column is "rowid", "oid" or "_rowid_" and an
- ** INTEGER PRIMARY KEY column has been explicitly declared, then the output
+ ** [INTEGER PRIMARY KEY] column has been explicitly declared, then the output
- ** parameters are set for the explicitly declared column. If there is no
+ ** parameters are set for the explicitly declared column. ^(If there is no
- ** explicitly declared IPK column, then the output parameters are set as
+ ** explicitly declared [INTEGER PRIMARY KEY] column, then the output
- ** follows:
+ ** parameters are set as follows:
  **
  ** <pre>
  **     data type: "INTEGER"
- Line 4524  void sqlite3_soft_heap_limit(int);
+ Line 5029  void sqlite3_soft_heap_limit(int);
  **     not null: 0
  **     primary key: 1
  **     auto increment: 0
- ** </pre>
+ ** </pre>)^
  **
- ** This function may load one or more schemas from database files. If an
+ ** ^(This function may load one or more schemas from database files. If an
  ** error occurs during this process, or if the requested table or column
- ** cannot be found, an SQLITE error code is returned and an error message
+ ** cannot be found, an [error code] is returned and an error message left
- ** left in the database handle (to be retrieved using sqlite3_errmsg()).
+ ** in the [database connection] (to be retrieved using sqlite3_errmsg()).)^
  **
- ** This API is only available if the library was compiled with the
+ ** ^This API is only available if the library was compiled with the
- ** SQLITE_ENABLE_COLUMN_METADATA preprocessor symbol defined.
+ ** [SQLITE_ENABLE_COLUMN_METADATA] C-preprocessor symbol defined.
  */
- int sqlite3_table_column_metadata(
+ SQLITE_API int sqlite3_table_column_metadata(
    sqlite3 *db,                /* Connection handle */
    const char *zDbName,        /* Database name or NULL */
    const char *zTableName,     /* Table name */
- Line 4547  int sqlite3_table_column_metadata(
+ Line 5052  int sqlite3_table_column_metadata(
  );
  /*
- ** CAPI3REF: Load An Extension {F12600}
+ ** CAPI3REF: Load An Extension
+ **
+ ** ^This interface loads an SQLite extension library from the named file.
+ **
+ ** ^The sqlite3_load_extension() interface attempts to load an
+ ** [SQLite extension] library contained in the file zFile.  If
+ ** the file cannot be loaded directly, attempts are made to load
+ ** with various operating-system specific extensions added.
+ ** So for example, if "samplelib" cannot be loaded, then names like
+ ** "samplelib.so" or "samplelib.dylib" or "samplelib.dll" might
+ ** be tried also.
+ **
+ ** ^The entry point is zProc.
+ ** ^(zProc may be 0, in which case SQLite will try to come up with an
+ ** entry point name on its own.  It first tries "sqlite3_extension_init".
+ ** If that does not work, it constructs a name "sqlite3_X_init" where the
+ ** X is consists of the lower-case equivalent of all ASCII alphabetic
+ ** characters in the filename from the last "/" to the first following
+ ** "." and omitting any initial "lib".)^
+ ** ^The sqlite3_load_extension() interface returns
+ ** [SQLITE_OK] on success and [SQLITE_ERROR] if something goes wrong.
+ ** ^If an error occurs and pzErrMsg is not 0, then the
+ ** [sqlite3_load_extension()] interface shall attempt to
+ ** fill *pzErrMsg with error message text stored in memory
+ ** obtained from [sqlite3_malloc()]. The calling function
+ ** should free this memory by calling [sqlite3_free()].
+ **
+ ** ^Extension loading must be enabled using
+ ** [sqlite3_enable_load_extension()] prior to calling this API,
+ ** otherwise an error will be returned.
  **
- ** {F12601} The sqlite3_load_extension() interface
+ ** See also the [load_extension() SQL function].
- ** attempts to load an SQLite extension library contained in the file
- ** zFile. {F12602} The entry point is zProc. {F12603} zProc may be 0
- ** in which case the name of the entry point defaults
- ** to "sqlite3_extension_init".
- **
- ** {F12604} The sqlite3_load_extension() interface shall
- ** return [SQLITE_OK] on success and [SQLITE_ERROR] if something goes wrong.
- **
- ** {F12605}
- ** If an error occurs and pzErrMsg is not 0, then the
- ** sqlite3_load_extension() interface shall attempt to fill *pzErrMsg with
- ** error message text stored in memory obtained from [sqlite3_malloc()].
- ** {END}  The calling function should free this memory
- ** by calling [sqlite3_free()].
- **
- ** {F12606}
- ** Extension loading must be enabled using [sqlite3_enable_load_extension()]
- ** prior to calling this API or an error will be returned.
  */
- int sqlite3_load_extension(
+ SQLITE_API int sqlite3_load_extension(
    sqlite3 *db,          /* Load the extension into this database connection */
    const char *zFile,    /* Name of the shared library containing extension */
    const char *zProc,    /* Entry point.  Derived from zFile if 0 */
- Line 4577  int sqlite3_load_extension(
+ Line 5093  int sqlite3_load_extension(
  );
  /*
- ** CAPI3REF:  Enable Or Disable Extension Loading {F12620}
+ ** CAPI3REF: Enable Or Disable Extension Loading
  **
- ** So as not to open security holes in older applications that are
+ ** ^So as not to open security holes in older applications that are
- ** unprepared to deal with extension loading, and as a means of disabling
+ ** unprepared to deal with [extension loading], and as a means of disabling
- ** extension loading while evaluating user-entered SQL, the following
+ ** [extension loading] while evaluating user-entered SQL, the following API
- ** API is provided to turn the [sqlite3_load_extension()] mechanism on and
+ ** is provided to turn the [sqlite3_load_extension()] mechanism on and off.
- ** off.  {F12622} It is off by default. {END} See ticket #1863.
  **
- ** {F12621} Call the sqlite3_enable_load_extension() routine
+ ** ^Extension loading is off by default.
- ** with onoff==1 to turn extension loading on
+ ** ^Call the sqlite3_enable_load_extension() routine with onoff==1
- ** and call it with onoff==0 to turn it back off again. {END}
+ ** to turn extension loading on and call it with onoff==0 to turn
+ ** it back off again.
  */
- int sqlite3_enable_load_extension(sqlite3 *db, int onoff);
+ SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff);
  /*
- ** CAPI3REF: Make Arrangements To Automatically Load An Extension {F12640}
+ ** CAPI3REF: Automatically Load Statically Linked Extensions
  **
- ** {F12641} This function
+ ** ^This interface causes the xEntryPoint() function to be invoked for
- ** registers an extension entry point that is automatically invoked
+ ** each new [database connection] that is created.  The idea here is that
- ** whenever a new database connection is opened using
+ ** xEntryPoint() is the entry point for a statically linked [SQLite extension]
- ** [sqlite3_open()], [sqlite3_open16()], or [sqlite3_open_v2()]. {END}
+ ** that is to be automatically loaded into all new database connections.
  **
- ** This API can be invoked at program startup in order to register
+ ** ^(Even though the function prototype shows that xEntryPoint() takes
- ** one or more statically linked extensions that will be available
+ ** no arguments and returns void, SQLite invokes xEntryPoint() with three
- ** to all new database connections.
+ ** arguments and expects and integer result as if the signature of the
+ ** entry point where as follows:
  **
- ** {F12642} Duplicate extensions are detected so calling this routine multiple
+ ** <blockquote><pre>
- ** times with the same extension is harmless.
+ ** &nbsp;  int xEntryPoint(
+ ** &nbsp;    sqlite3 *db,
+ ** &nbsp;    const char **pzErrMsg,
+ ** &nbsp;    const struct sqlite3_api_routines *pThunk
+ ** &nbsp;  );
+ ** </pre></blockquote>)^
  **
- ** {F12643} This routine stores a pointer to the extension in an array
+ ** If the xEntryPoint routine encounters an error, it should make *pzErrMsg
- ** that is obtained from sqlite_malloc(). {END} If you run a memory leak
+ ** point to an appropriate error message (obtained from [sqlite3_mprintf()])
- ** checker on your program and it reports a leak because of this
+ ** and return an appropriate [error code].  ^SQLite ensures that *pzErrMsg
- ** array, then invoke [sqlite3_reset_auto_extension()] prior
+ ** is NULL before calling the xEntryPoint().  ^SQLite will invoke
- ** to shutdown to free the memory.
+ ** [sqlite3_free()] on *pzErrMsg after xEntryPoint() returns.  ^If any
+ ** xEntryPoint() returns an error, the [sqlite3_open()], [sqlite3_open16()],
+ ** or [sqlite3_open_v2()] call that provoked the xEntryPoint() will fail.
  **
- ** {F12644} Automatic extensions apply across all threads. {END}
+ ** ^Calling sqlite3_auto_extension(X) with an entry point X that is already
+ ** on the list of automatic extensions is a harmless no-op. ^No entry point
+ ** will be called more than once for each database connection that is opened.
  **
- ** This interface is experimental and is subject to change or
+ ** See also: [sqlite3_reset_auto_extension()]
- ** removal in future releases of SQLite.
+ ** and [sqlite3_cancel_auto_extension()]
  */
- int sqlite3_auto_extension(void *xEntryPoint);
+ SQLITE_API int sqlite3_auto_extension(void (*xEntryPoint)(void));
  /*
- ** CAPI3REF: Reset Automatic Extension Loading {F12660}
+ ** CAPI3REF: Cancel Automatic Extension Loading
- **
- ** {F12661} This function disables all previously registered
- ** automatic extensions. {END}  This
- ** routine undoes the effect of all prior [sqlite3_auto_extension()]
- ** calls.
  **
- ** {F12662} This call disabled automatic extensions in all threads. {END}
+ ** ^The [sqlite3_cancel_auto_extension(X)] interface unregisters the
- **
+ ** initialization routine X that was registered using a prior call to
- ** This interface is experimental and is subject to change or
+ ** [sqlite3_auto_extension(X)].  ^The [sqlite3_cancel_auto_extension(X)]
- ** removal in future releases of SQLite.
+ ** routine returns 1 if initialization routine X was successfully
+ ** unregistered and it returns 0 if X was not on the list of initialization
+ ** routines.
  */
- void sqlite3_reset_auto_extension(void);
+ SQLITE_API int sqlite3_cancel_auto_extension(void (*xEntryPoint)(void));
  /*
- ****** EXPERIMENTAL - subject to change without notice **************
+ ** CAPI3REF: Reset Automatic Extension Loading
  **
+ ** ^This interface disables all automatic extensions previously
+ ** registered using [sqlite3_auto_extension()].
+ */
+ SQLITE_API void sqlite3_reset_auto_extension(void);
+ /*
  ** The interface to the virtual-table mechanism is currently considered
  ** to be experimental.  The interface might change in incompatible ways.
  ** If this is a problem for you, do not use the interface at this time.
  **
- ** When the virtual-table mechanism stablizes, we will declare the
+ ** When the virtual-table mechanism stabilizes, we will declare the
  ** interface fixed, support it indefinitely, and remove this comment.
  */
- Line 4656  typedef struct sqlite3_vtab_cursor sqlit
+ Line 5183  typedef struct sqlite3_vtab_cursor sqlit
  typedef struct sqlite3_module sqlite3_module;
  /*
- ** CAPI3REF: Virtual Table Object {F18000}
+ ** CAPI3REF: Virtual Table Object
- ** KEYWORDS: sqlite3_module
+ ** KEYWORDS: sqlite3_module {virtual table module}
  **
- ** A module is a class of virtual tables.  Each module is defined
+ ** This structure, sometimes called a "virtual table module",
- ** by an instance of the following structure.  This structure consists
+ ** defines the implementation of a [virtual tables].
- ** mostly of methods for the module.
+ ** This structure consists mostly of methods for the module.
+ **
+ ** ^A virtual table module is created by filling in a persistent
+ ** instance of this structure and passing a pointer to that instance
+ ** to [sqlite3_create_module()] or [sqlite3_create_module_v2()].
+ ** ^The registration remains valid until it is replaced by a different
+ ** module or until the [database connection] closes.  The content
+ ** of this structure must not change while it is registered with
+ ** any database connection.
  */
  struct sqlite3_module {
    int iVersion;
- Line 4690  struct sqlite3_module {
+ Line 5225  struct sqlite3_module {
    int (*xFindFunction)(sqlite3_vtab *pVtab, int nArg, const char *zName,
                         void (**pxFunc)(sqlite3_context*,int,sqlite3_value**),
                         void **ppArg);
    int (*xRename)(sqlite3_vtab *pVtab, const char *zNew);
+   /* The methods above are in version 1 of the sqlite_module object. Those
+   ** below are for version 2 and greater. */
+   int (*xSavepoint)(sqlite3_vtab *pVTab, int);
+   int (*xRelease)(sqlite3_vtab *pVTab, int);
+   int (*xRollbackTo)(sqlite3_vtab *pVTab, int);
  };
  /*
- ** CAPI3REF: Virtual Table Indexing Information {F18100}
+ ** CAPI3REF: Virtual Table Indexing Information
  ** KEYWORDS: sqlite3_index_info
  **
- ** The sqlite3_index_info structure and its substructures is used to
+ ** The sqlite3_index_info structure and its substructures is used as part
- ** pass information into and receive the reply from the xBestIndex
+ ** of the [virtual table] interface to
- ** method of an sqlite3_module.  The fields under **Inputs** are the
+ ** pass information into and receive the reply from the [xBestIndex]
+ ** method of a [virtual table module].  The fields under **Inputs** are the
  ** inputs to xBestIndex and are read-only.  xBestIndex inserts its
  ** results into the **Outputs** fields.
  **
- ** The aConstraint[] array records WHERE clause constraints of the
+ ** ^(The aConstraint[] array records WHERE clause constraints of the form:
- ** form:
  **
- **         column OP expr
+ ** <blockquote>column OP expr</blockquote>
  **
- ** Where OP is =, &lt;, &lt;=, &gt;, or &gt;=.
+ ** where OP is =, &lt;, &lt;=, &gt;, or &gt;=.)^  ^(The particular operator is
- ** The particular operator is stored
+ ** stored in aConstraint[].op using one of the
- ** in aConstraint[].op.  The index of the column is stored in
+ ** [SQLITE_INDEX_CONSTRAINT_EQ | SQLITE_INDEX_CONSTRAINT_ values].)^
- ** aConstraint[].iColumn.  aConstraint[].usable is TRUE if the
+ ** ^(The index of the column is stored in
+ ** aConstraint[].iColumn.)^  ^(aConstraint[].usable is TRUE if the
  ** expr on the right-hand side can be evaluated (and thus the constraint
- ** is usable) and false if it cannot.
+ ** is usable) and false if it cannot.)^
  **
- ** The optimizer automatically inverts terms of the form "expr OP column"
+ ** ^The optimizer automatically inverts terms of the form "expr OP column"
  ** and makes other simplifications to the WHERE clause in an attempt to
  ** get as many WHERE clause terms into the form shown above as possible.
- ** The aConstraint[] array only reports WHERE clause terms in the correct
+ ** ^The aConstraint[] array only reports WHERE clause terms that are
- ** form that refer to the particular virtual table being queried.
+ ** relevant to the particular virtual table being queried.
  **
- ** Information about the ORDER BY clause is stored in aOrderBy[].
+ ** ^Information about the ORDER BY clause is stored in aOrderBy[].
- ** Each term of aOrderBy records a column of the ORDER BY clause.
+ ** ^Each term of aOrderBy records a column of the ORDER BY clause.
  **
- ** The xBestIndex method must fill aConstraintUsage[] with information
+ ** The [xBestIndex] method must fill aConstraintUsage[] with information
- ** about what parameters to pass to xFilter.  If argvIndex>0 then
+ ** about what parameters to pass to xFilter.  ^If argvIndex>0 then
  ** the right-hand side of the corresponding aConstraint[] is evaluated
- ** and becomes the argvIndex-th entry in argv.  If aConstraintUsage[].omit
+ ** and becomes the argvIndex-th entry in argv.  ^(If aConstraintUsage[].omit
  ** is true, then the constraint is assumed to be fully handled by the
- ** virtual table and is not checked again by SQLite.
+ ** virtual table and is not checked again by SQLite.)^
  **
- ** The idxNum and idxPtr values are recorded and passed into xFilter.
+ ** ^The idxNum and idxPtr values are recorded and passed into the
- ** sqlite3_free() is used to free idxPtr if needToFreeIdxPtr is true.
+ ** [xFilter] method.
+ ** ^[sqlite3_free()] is used to free idxPtr if and only if
+ ** needToFreeIdxPtr is true.
  **
- ** The orderByConsumed means that output from xFilter will occur in
+ ** ^The orderByConsumed means that output from [xFilter]/[xNext] will occur in
  ** the correct order to satisfy the ORDER BY clause so that no separate
  ** sorting step is required.
  **
- ** The estimatedCost value is an estimate of the cost of doing the
+ ** ^The estimatedCost value is an estimate of the cost of doing the
  ** particular lookup.  A full scan of a table with N entries should have
  ** a cost of N.  A binary search of a table of N entries should have a
  ** cost of approximately log(N).
- Line 4758  struct sqlite3_index_info {
+ Line 5300  struct sqlite3_index_info {
       int iColumn;              /* Column number */
       unsigned char desc;       /* True for DESC.  False for ASC. */
    } *aOrderBy;               /* The ORDER BY clause */
    /* Outputs */
    struct sqlite3_index_constraint_usage {
      int argvIndex;           /* if >0, constraint is part of argv to xFilter */
- Line 4770  struct sqlite3_index_info {
+ Line 5311  struct sqlite3_index_info {
    int orderByConsumed;       /* True if output is already ordered */
    double estimatedCost;      /* Estimated cost of using this index */
  };
+ /*
+ ** CAPI3REF: Virtual Table Constraint Operator Codes
+ **
+ ** These macros defined the allowed values for the
+ ** [sqlite3_index_info].aConstraint[].op field.  Each value represents
+ ** an operator that is part of a constraint term in the wHERE clause of
+ ** a query that uses a [virtual table].
+ */
  #define SQLITE_INDEX_CONSTRAINT_EQ    2
  #define SQLITE_INDEX_CONSTRAINT_GT    4
  #define SQLITE_INDEX_CONSTRAINT_LE    8
- Line 4778  struct sqlite3_index_info {
+ Line 5328  struct sqlite3_index_info {
  #define SQLITE_INDEX_CONSTRAINT_MATCH 64
  /*
- ** CAPI3REF: Register A Virtual Table Implementation {F18200}
+ ** CAPI3REF: Register A Virtual Table Implementation
  **
- ** This routine is used to register a new module name with an SQLite
+ ** ^These routines are used to register a new [virtual table module] name.
- ** connection.  Module names must be registered before creating new
+ ** ^Module names must be registered before
- ** virtual tables on the module, or before using preexisting virtual
+ ** creating a new [virtual table] using the module and before using a
- ** tables of the module.
+ ** preexisting [virtual table] for the module.
+ **
+ ** ^The module name is registered on the [database connection] specified
+ ** by the first parameter.  ^The name of the module is given by the
+ ** second parameter.  ^The third parameter is a pointer to
+ ** the implementation of the [virtual table module].   ^The fourth
+ ** parameter is an arbitrary client data pointer that is passed through
+ ** into the [xCreate] and [xConnect] methods of the virtual table module
+ ** when a new virtual table is be being created or reinitialized.
+ **
+ ** ^The sqlite3_create_module_v2() interface has a fifth parameter which
+ ** is a pointer to a destructor for the pClientData.  ^SQLite will
+ ** invoke the destructor function (if it is not NULL) when SQLite
+ ** no longer needs the pClientData pointer.  ^The destructor will also
+ ** be invoked if the call to sqlite3_create_module_v2() fails.
+ ** ^The sqlite3_create_module()
+ ** interface is equivalent to sqlite3_create_module_v2() with a NULL
+ ** destructor.
  */
- int sqlite3_create_module(
+ SQLITE_API int sqlite3_create_module(
    sqlite3 *db,               /* SQLite connection to register module with */
    const char *zName,         /* Name of the module */
-   const sqlite3_module *,    /* Methods for the module */
+   const sqlite3_module *p,   /* Methods for the module */
-   void *                     /* Client data for xCreate/xConnect */
+   void *pClientData          /* Client data for xCreate/xConnect */
  );
+ SQLITE_API int sqlite3_create_module_v2(
- /*
- ** CAPI3REF: Register A Virtual Table Implementation {F18210}
- **
- ** This routine is identical to the sqlite3_create_module() method above,
- ** except that it allows a destructor function to be specified. It is
- ** even more experimental than the rest of the virtual tables API.
- */
- int sqlite3_create_module_v2(
    sqlite3 *db,               /* SQLite connection to register module with */
    const char *zName,         /* Name of the module */
-   const sqlite3_module *,    /* Methods for the module */
+   const sqlite3_module *p,   /* Methods for the module */
-   void *,                    /* Client data for xCreate/xConnect */
+   void *pClientData,         /* Client data for xCreate/xConnect */
    void(*xDestroy)(void*)     /* Module destructor function */
  );
  /*
- ** CAPI3REF: Virtual Table Instance Object {F18010}
+ ** CAPI3REF: Virtual Table Instance Object
  ** KEYWORDS: sqlite3_vtab
  **
- ** Every module implementation uses a subclass of the following structure
+ ** Every [virtual table module] implementation uses a subclass
- ** to describe a particular instance of the module.  Each subclass will
+ ** of this object to describe a particular instance
- ** be tailored to the specific needs of the module implementation.   The
+ ** of the [virtual table].  Each subclass will
- ** purpose of this superclass is to define certain fields that are common
+ ** be tailored to the specific needs of the module implementation.
- ** to all module implementations.
+ ** The purpose of this superclass is to define certain fields that are
- **
+ ** common to all module implementations.
- ** Virtual tables methods can set an error message by assigning a
+ **
- ** string obtained from sqlite3_mprintf() to zErrMsg.  The method should
+ ** ^Virtual tables methods can set an error message by assigning a
- ** take care that any prior string is freed by a call to sqlite3_free()
+ ** string obtained from [sqlite3_mprintf()] to zErrMsg.  The method should
- ** prior to assigning a new string to zErrMsg.  After the error message
+ ** take care that any prior string is freed by a call to [sqlite3_free()]
+ ** prior to assigning a new string to zErrMsg.  ^After the error message
  ** is delivered up to the client application, the string will be automatically
- ** freed by sqlite3_free() and the zErrMsg field will be zeroed.  Note
+ ** freed by sqlite3_free() and the zErrMsg field will be zeroed.
- ** that sqlite3_mprintf() and sqlite3_free() are used on the zErrMsg field
- ** since virtual tables are commonly implemented in loadable extensions which
- ** do not have access to sqlite3MPrintf() or sqlite3Free().
  */
  struct sqlite3_vtab {
    const sqlite3_module *pModule;  /* The module for this virtual table */
-   int nRef;                       /* Used internally */
+   int nRef;                       /* NO LONGER USED */
    char *zErrMsg;                  /* Error message from sqlite3_mprintf() */
    /* Virtual table implementations will typically add additional fields */
  };
  /*
- ** CAPI3REF: Virtual Table Cursor Object  {F18020}
+ ** CAPI3REF: Virtual Table Cursor Object
- ** KEYWORDS: sqlite3_vtab_cursor
+ ** KEYWORDS: sqlite3_vtab_cursor {virtual table cursor}
  **
- ** Every module implementation uses a subclass of the following structure
+ ** Every [virtual table module] implementation uses a subclass of the
- ** to describe cursors that point into the virtual table and are used
+ ** following structure to describe cursors that point into the
+ ** [virtual table] and are used
  ** to loop through the virtual table.  Cursors are created using the
- ** xOpen method of the module.  Each module implementation will define
+ ** [sqlite3_module.xOpen | xOpen] method of the module and are destroyed
+ ** by the [sqlite3_module.xClose | xClose] method.  Cursors are used
+ ** by the [xFilter], [xNext], [xEof], [xColumn], and [xRowid] methods
+ ** of the module.  Each module implementation will define
  ** the content of a cursor structure to suit its own needs.
  **
  ** This superclass exists in order to define fields of the cursor that
- Line 4853  struct sqlite3_vtab_cursor {
+ Line 5414  struct sqlite3_vtab_cursor {
  };
  /*
- ** CAPI3REF: Declare The Schema Of A Virtual Table {F18280}
+ ** CAPI3REF: Declare The Schema Of A Virtual Table
  **
- ** The xCreate and xConnect methods of a module use the following API
+ ** ^The [xCreate] and [xConnect] methods of a
+ ** [virtual table module] call this interface
  ** to declare the format (the names and datatypes of the columns) of
  ** the virtual tables they implement.
  */
- int sqlite3_declare_vtab(sqlite3*, const char *zCreateTable);
+ SQLITE_API int sqlite3_declare_vtab(sqlite3*, const char *zSQL);
  /*
- ** CAPI3REF: Overload A Function For A Virtual Table {F18300}
+ ** CAPI3REF: Overload A Function For A Virtual Table
  **
- ** Virtual tables can provide alternative implementations of functions
+ ** ^(Virtual tables can provide alternative implementations of functions
- ** using the xFindFunction method.  But global versions of those functions
+ ** using the [xFindFunction] method of the [virtual table module].
- ** must exist in order to be overloaded.
+ ** But global versions of those functions
+ ** must exist in order to be overloaded.)^
  **
- ** This API makes sure a global version of a function with a particular
+ ** ^(This API makes sure a global version of a function with a particular
  ** name and number of parameters exists.  If no such function exists
- ** before this API is called, a new function is created.  The implementation
+ ** before this API is called, a new function is created.)^  ^The implementation
  ** of the new function always causes an exception to be thrown.  So
  ** the new function is not good for anything by itself.  Its only
- ** purpose is to be a place-holder function that can be overloaded
+ ** purpose is to be a placeholder function that can be overloaded
- ** by virtual tables.
+ ** by a [virtual table].
- **
- ** This API should be considered part of the virtual table interface,
- ** which is experimental and subject to change.
  */
- int sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
+ SQLITE_API int sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
  /*
  ** The interface to the virtual-table mechanism defined above (back up
- Line 4889  int sqlite3_overload_function(sqlite3*,
+ Line 5449  int sqlite3_overload_function(sqlite3*,
  **
  ** When the virtual-table mechanism stabilizes, we will declare the
  ** interface fixed, support it indefinitely, and remove this comment.
- **
- ****** EXPERIMENTAL - subject to change without notice **************
  */
  /*
- ** CAPI3REF: A Handle To An Open BLOB {F17800}
+ ** CAPI3REF: A Handle To An Open BLOB
+ ** KEYWORDS: {BLOB handle} {BLOB handles}
  **
  ** An instance of this object represents an open BLOB on which
- ** incremental I/O can be preformed.
+ ** [sqlite3_blob_open | incremental BLOB I/O] can be performed.
- ** Objects of this type are created by
+ ** ^Objects of this type are created by [sqlite3_blob_open()]
- ** [sqlite3_blob_open()] and destroyed by [sqlite3_blob_close()].
+ ** and destroyed by [sqlite3_blob_close()].
- ** The [sqlite3_blob_read()] and [sqlite3_blob_write()] interfaces
+ ** ^The [sqlite3_blob_read()] and [sqlite3_blob_write()] interfaces
- ** can be used to read or write small subsections of the blob.
+ ** can be used to read or write small subsections of the BLOB.
- ** The [sqlite3_blob_bytes()] interface returns the size of the
+ ** ^The [sqlite3_blob_bytes()] interface returns the size of the BLOB in bytes.
- ** blob in bytes.
  */
  typedef struct sqlite3_blob sqlite3_blob;
  /*
- ** CAPI3REF: Open A BLOB For Incremental I/O {F17810}
+ ** CAPI3REF: Open A BLOB For Incremental I/O
  **
- ** This interfaces opens a handle to the blob located
+ ** ^(This interfaces opens a [BLOB handle | handle] to the BLOB located
- ** in row iRow,, column zColumn, table zTable in database zDb;
+ ** in row iRow, column zColumn, table zTable in database zDb;
- ** in other words,  the same blob that would be selected by:
+ ** in other words, the same BLOB that would be selected by:
  **
  ** <pre>
- **     SELECT zColumn FROM zDb.zTable WHERE rowid = iRow;
+ **     SELECT zColumn FROM zDb.zTable WHERE [rowid] = iRow;
- ** </pre> {END}
+ ** </pre>)^
- **
- ** If the flags parameter is non-zero, the blob is opened for
- ** read and write access. If it is zero, the blob is opened for read
- ** access.
- **
- ** On success, [SQLITE_OK] is returned and the new
- ** [sqlite3_blob | blob handle] is written to *ppBlob.
- ** Otherwise an error code is returned and
- ** any value written to *ppBlob should not be used by the caller.
- ** This function sets the database-handle error code and message
- ** accessible via [sqlite3_errcode()] and [sqlite3_errmsg()].
- **
- ** INVARIANTS:
  **
- ** {F17813} A successful invocation of the [sqlite3_blob_open(D,B,T,C,R,F,P)]
+ ** ^If the flags parameter is non-zero, then the BLOB is opened for read
- **          interface opens an [sqlite3_blob] object P on the blob
+ ** and write access. ^If it is zero, the BLOB is opened for read access.
- **          in column C of table T in database B on [database connection] D.
+ ** ^It is not possible to open a column that is part of an index or primary
+ ** key for writing. ^If [foreign key constraints] are enabled, it is
+ ** not possible to open a column that is part of a [child key] for writing.
+ **
+ ** ^Note that the database name is not the filename that contains
+ ** the database but rather the symbolic name of the database that
+ ** appears after the AS keyword when the database is connected using [ATTACH].
+ ** ^For the main database file, the database name is "main".
+ ** ^For TEMP tables, the database name is "temp".
+ **
+ ** ^(On success, [SQLITE_OK] is returned and the new [BLOB handle] is written
+ ** to *ppBlob. Otherwise an [error code] is returned and *ppBlob is set
+ ** to be a null pointer.)^
+ ** ^This function sets the [database connection] error code and message
+ ** accessible via [sqlite3_errcode()] and [sqlite3_errmsg()] and related
+ ** functions. ^Note that the *ppBlob variable is always initialized in a
+ ** way that makes it safe to invoke [sqlite3_blob_close()] on *ppBlob
+ ** regardless of the success or failure of this routine.
+ **
+ ** ^(If the row that a BLOB handle points to is modified by an
+ ** [UPDATE], [DELETE], or by [ON CONFLICT] side-effects
+ ** then the BLOB handle is marked as "expired".
+ ** This is true if any column of the row is changed, even a column
+ ** other than the one the BLOB handle is open on.)^
+ ** ^Calls to [sqlite3_blob_read()] and [sqlite3_blob_write()] for
+ ** an expired BLOB handle fail with a return code of [SQLITE_ABORT].
+ ** ^(Changes written into a BLOB prior to the BLOB expiring are not
+ ** rolled back by the expiration of the BLOB.  Such changes will eventually
+ ** commit if the transaction continues to completion.)^
+ **
+ ** ^Use the [sqlite3_blob_bytes()] interface to determine the size of
+ ** the opened blob.  ^The size of a blob may not be changed by this
+ ** interface.  Use the [UPDATE] SQL command to change the size of a
+ ** blob.
+ **
+ ** ^The [sqlite3_bind_zeroblob()] and [sqlite3_result_zeroblob()] interfaces
+ ** and the built-in [zeroblob] SQL function can be used, if desired,
+ ** to create an empty, zero-filled blob in which to read or write using
+ ** this interface.
  **
- ** {F17814} A successful invocation of [sqlite3_blob_open(D,...)] starts
+ ** To avoid a resource leak, every open [BLOB handle] should eventually
- **          a new transaction on [database connection] D if that connection
+ ** be released by a call to [sqlite3_blob_close()].
- **          is not already in a transaction.
- **
- ** {F17816} The [sqlite3_blob_open(D,B,T,C,R,F,P)] interface opens the blob
- **          for read and write access if and only if the F parameter
- **          is non-zero.
- **
- ** {F17819} The [sqlite3_blob_open()] interface returns [SQLITE_OK] on
- **          success and an appropriate [error code] on failure.
- **
- ** {F17821} If an error occurs during evaluation of [sqlite3_blob_open(D,...)]
- **          then subsequent calls to [sqlite3_errcode(D)],
- **          [sqlite3_errmsg(D)], and [sqlite3_errmsg16(D)] will return
- **          information approprate for that error.
  */
- int sqlite3_blob_open(
+ SQLITE_API int sqlite3_blob_open(
    sqlite3*,
    const char *zDb,
    const char *zTable,
- Line 4962  int sqlite3_blob_open(
+ Line 5532  int sqlite3_blob_open(
  );
  /*
- ** CAPI3REF:  Close A BLOB Handle {F17830}
+ ** CAPI3REF: Move a BLOB Handle to a New Row
  **
- ** Close an open [sqlite3_blob | blob handle].
+ ** ^This function is used to move an existing blob handle so that it points
+ ** to a different row of the same database table. ^The new row is identified
+ ** by the rowid value passed as the second argument. Only the row can be
+ ** changed. ^The database, table and column on which the blob handle is open
+ ** remain the same. Moving an existing blob handle to a new row can be
+ ** faster than closing the existing handle and opening a new one.
  **
- ** Closing a BLOB shall cause the current transaction to commit
+ ** ^(The new row must meet the same criteria as for [sqlite3_blob_open()] -
- ** if there are no other BLOBs, no pending prepared statements, and the
+ ** it must exist and there must be either a blob or text value stored in
- ** database connection is in autocommit mode.
+ ** the nominated column.)^ ^If the new row is not present in the table, or if
- ** If any writes were made to the BLOB, they might be held in cache
+ ** it does not contain a blob or text value, or if another error occurs, an
- ** until the close operation if they will fit. {END}
+ ** SQLite error code is returned and the blob handle is considered aborted.
- ** Closing the BLOB often forces the changes
+ ** ^All subsequent calls to [sqlite3_blob_read()], [sqlite3_blob_write()] or
- ** out to disk and so if any I/O errors occur, they will likely occur
+ ** [sqlite3_blob_reopen()] on an aborted blob handle immediately return
- ** at the time when the BLOB is closed.  {F17833} Any errors that occur during
+ ** SQLITE_ABORT. ^Calling [sqlite3_blob_bytes()] on an aborted blob handle
- ** closing are reported as a non-zero return value.
+ ** always returns zero.
+ **
+ ** ^This function sets the database handle error code and message.
+ */
+ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_blob_reopen(sqlite3_blob *, sqlite3_int64);
+ /*
+ ** CAPI3REF: Close A BLOB Handle
  **
- ** The BLOB is closed unconditionally.  Even if this routine returns
+ ** ^Closes an open [BLOB handle].
- ** an error code, the BLOB is still closed.
  **
- ** INVARIANTS:
+ ** ^Closing a BLOB shall cause the current transaction to commit
+ ** if there are no other BLOBs, no pending prepared statements, and the
+ ** database connection is in [autocommit mode].
+ ** ^If any writes were made to the BLOB, they might be held in cache
+ ** until the close operation if they will fit.
  **
- ** {F17833} The [sqlite3_blob_close(P)] interface closes an
+ ** ^(Closing the BLOB often forces the changes
- **          [sqlite3_blob] object P previously opened using
+ ** out to disk and so if any I/O errors occur, they will likely occur
- **          [sqlite3_blob_open()].
+ ** at the time when the BLOB is closed.  Any errors that occur during
+ ** closing are reported as a non-zero return value.)^
  **
- ** {F17836} Closing an [sqlite3_blob] object using
+ ** ^(The BLOB is closed unconditionally.  Even if this routine returns
- **          [sqlite3_blob_close()] shall cause the current transaction to
+ ** an error code, the BLOB is still closed.)^
- **          commit if there are no other open [sqlite3_blob] objects
- **          or [prepared statements] on the same [database connection] and
- **          the [database connection] is in
- **          [sqlite3_get_autocommit | autocommit mode].
  **
- ** {F17839} The [sqlite3_blob_close(P)] interfaces closes the
+ ** ^Calling this routine with a null pointer (such as would be returned
- **          [sqlite3_blob] object P unconditionally, even if
+ ** by a failed call to [sqlite3_blob_open()]) is a harmless no-op.
- **          [sqlite3_blob_close(P)] returns something other than [SQLITE_OK].
- **
  */
- int sqlite3_blob_close(sqlite3_blob *);
+ SQLITE_API int sqlite3_blob_close(sqlite3_blob *);
  /*
- ** CAPI3REF:  Return The Size Of An Open BLOB {F17840}
+ ** CAPI3REF: Return The Size Of An Open BLOB
- **
- ** Return the size in bytes of the blob accessible via the open
- ** [sqlite3_blob] object in its only argument.
  **
- ** INVARIANTS:
+ ** ^Returns the size in bytes of the BLOB accessible via the
+ ** successfully opened [BLOB handle] in its only argument.  ^The
+ ** incremental blob I/O routines can only read or overwriting existing
+ ** blob content; they cannot change the size of a blob.
  **
- ** {F17843} The [sqlite3_blob_bytes(P)] interface returns the size
+ ** This routine only works on a [BLOB handle] which has been created
- **          in bytes of the BLOB that the [sqlite3_blob] object P
+ ** by a prior successful call to [sqlite3_blob_open()] and which has not
- **          refers to.
+ ** been closed by [sqlite3_blob_close()].  Passing any other pointer in
+ ** to this routine results in undefined and probably undesirable behavior.
  */
- int sqlite3_blob_bytes(sqlite3_blob *);
+ SQLITE_API int sqlite3_blob_bytes(sqlite3_blob *);
  /*
- ** CAPI3REF:  Read Data From A BLOB Incrementally {F17850}
+ ** CAPI3REF: Read Data From A BLOB Incrementally
  **
- ** This function is used to read data from an open
+ ** ^(This function is used to read data from an open [BLOB handle] into a
- ** [sqlite3_blob | blob-handle] into a caller supplied buffer.
+ ** caller-supplied buffer. N bytes of data are copied into buffer Z
- ** N bytes of data are copied into buffer
+ ** from the open BLOB, starting at offset iOffset.)^
- ** Z from the open blob, starting at offset iOffset.
  **
- ** If offset iOffset is less than N bytes from the end of the blob,
+ ** ^If offset iOffset is less than N bytes from the end of the BLOB,
- ** [SQLITE_ERROR] is returned and no data is read.  If N or iOffset is
+ ** [SQLITE_ERROR] is returned and no data is read.  ^If N or iOffset is
- ** less than zero [SQLITE_ERROR] is returned and no data is read.
+ ** less than zero, [SQLITE_ERROR] is returned and no data is read.
+ ** ^The size of the blob (and hence the maximum value of N+iOffset)
+ ** can be determined using the [sqlite3_blob_bytes()] interface.
  **
- ** On success, SQLITE_OK is returned. Otherwise, an
+ ** ^An attempt to read from an expired [BLOB handle] fails with an
- ** [error code] or an [extended error code] is returned.
+ ** error code of [SQLITE_ABORT].
  **
- ** INVARIANTS:
+ ** ^(On success, sqlite3_blob_read() returns SQLITE_OK.
+ ** Otherwise, an [error code] or an [extended error code] is returned.)^
  **
- ** {F17853} The [sqlite3_blob_read(P,Z,N,X)] interface reads N bytes
+ ** This routine only works on a [BLOB handle] which has been created
- **          beginning at offset X from
+ ** by a prior successful call to [sqlite3_blob_open()] and which has not
- **          the blob that [sqlite3_blob] object P refers to
+ ** been closed by [sqlite3_blob_close()].  Passing any other pointer in
- **          and writes those N bytes into buffer Z.
+ ** to this routine results in undefined and probably undesirable behavior.
  **
- ** {F17856} In [sqlite3_blob_read(P,Z,N,X)] if the size of the blob
+ ** See also: [sqlite3_blob_write()].
- **          is less than N+X bytes, then the function returns [SQLITE_ERROR]
- **          and nothing is read from the blob.
- **
- ** {F17859} In [sqlite3_blob_read(P,Z,N,X)] if X or N is less than zero
- **          then the function returns [SQLITE_ERROR]
- **          and nothing is read from the blob.
- **
- ** {F17862} The [sqlite3_blob_read(P,Z,N,X)] interface returns [SQLITE_OK]
- **          if N bytes where successfully read into buffer Z.
- **
- ** {F17865} If the requested read could not be completed,
- **          the [sqlite3_blob_read(P,Z,N,X)] interface returns an
- **          appropriate [error code] or [extended error code].
- **
- ** {F17868} If an error occurs during evaluation of [sqlite3_blob_read(D,...)]
- **          then subsequent calls to [sqlite3_errcode(D)],
- **          [sqlite3_errmsg(D)], and [sqlite3_errmsg16(D)] will return
- **          information approprate for that error.
  */
- int sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);
+ SQLITE_API int sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);
  /*
- ** CAPI3REF:  Write Data Into A BLOB Incrementally {F17870}
+ ** CAPI3REF: Write Data Into A BLOB Incrementally
  **
- ** This function is used to write data into an open
+ ** ^This function is used to write data into an open [BLOB handle] from a
- ** [sqlite3_blob | blob-handle] from a user supplied buffer.
+ ** caller-supplied buffer. ^N bytes of data are copied from the buffer Z
- ** n bytes of data are copied from the buffer
+ ** into the open BLOB, starting at offset iOffset.
- ** pointed to by z into the open blob, starting at offset iOffset.
  **
- ** If the [sqlite3_blob | blob-handle] passed as the first argument
+ ** ^If the [BLOB handle] passed as the first argument was not opened for
- ** was not opened for writing (the flags parameter to [sqlite3_blob_open()]
+ ** writing (the flags parameter to [sqlite3_blob_open()] was zero),
- *** was zero), this function returns [SQLITE_READONLY].
+ ** this function returns [SQLITE_READONLY].
  **
- ** This function may only modify the contents of the blob; it is
+ ** ^This function may only modify the contents of the BLOB; it is
- ** not possible to increase the size of a blob using this API.
+ ** not possible to increase the size of a BLOB using this API.
- ** If offset iOffset is less than n bytes from the end of the blob,
+ ** ^If offset iOffset is less than N bytes from the end of the BLOB,
- ** [SQLITE_ERROR] is returned and no data is written.  If n is
+ ** [SQLITE_ERROR] is returned and no data is written.  ^If N is
  ** less than zero [SQLITE_ERROR] is returned and no data is written.
+ ** The size of the BLOB (and hence the maximum value of N+iOffset)
+ ** can be determined using the [sqlite3_blob_bytes()] interface.
  **
- ** On success, SQLITE_OK is returned. Otherwise, an
+ ** ^An attempt to write to an expired [BLOB handle] fails with an
- ** [error code] or an [extended error code] is returned.
+ ** error code of [SQLITE_ABORT].  ^Writes to the BLOB that occurred
- **
+ ** before the [BLOB handle] expired are not rolled back by the
- ** INVARIANTS:
+ ** expiration of the handle, though of course those changes might
- **
+ ** have been overwritten by the statement that expired the BLOB handle
- ** {F17873} The [sqlite3_blob_write(P,Z,N,X)] interface writes N bytes
+ ** or by other independent statements.
- **          from buffer Z into
- **          the blob that [sqlite3_blob] object P refers to
- **          beginning at an offset of X into the blob.
- **
- ** {F17875} The [sqlite3_blob_write(P,Z,N,X)] interface returns
- **          [SQLITE_READONLY] if the [sqlite3_blob] object P was
- **          [sqlite3_blob_open | opened] for reading only.
- **
- ** {F17876} In [sqlite3_blob_write(P,Z,N,X)] if the size of the blob
- **          is less than N+X bytes, then the function returns [SQLITE_ERROR]
- **          and nothing is written into the blob.
- **
- ** {F17879} In [sqlite3_blob_write(P,Z,N,X)] if X or N is less than zero
- **          then the function returns [SQLITE_ERROR]
- **          and nothing is written into the blob.
  **
- ** {F17882} The [sqlite3_blob_write(P,Z,N,X)] interface returns [SQLITE_OK]
+ ** ^(On success, sqlite3_blob_write() returns SQLITE_OK.
- **          if N bytes where successfully written into blob.
+ ** Otherwise, an  [error code] or an [extended error code] is returned.)^
  **
- ** {F17885} If the requested write could not be completed,
+ ** This routine only works on a [BLOB handle] which has been created
- **          the [sqlite3_blob_write(P,Z,N,X)] interface returns an
+ ** by a prior successful call to [sqlite3_blob_open()] and which has not
- **          appropriate [error code] or [extended error code].
+ ** been closed by [sqlite3_blob_close()].  Passing any other pointer in
+ ** to this routine results in undefined and probably undesirable behavior.
  **
- ** {F17888} If an error occurs during evaluation of [sqlite3_blob_write(D,...)]
+ ** See also: [sqlite3_blob_read()].
- **          then subsequent calls to [sqlite3_errcode(D)],
- **          [sqlite3_errmsg(D)], and [sqlite3_errmsg16(D)] will return
- **          information approprate for that error.
  */
- int sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);
+ SQLITE_API int sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);
  /*
- ** CAPI3REF:  Virtual File System Objects {F11200}
+ ** CAPI3REF: Virtual File System Objects
  **
  ** A virtual filesystem (VFS) is an [sqlite3_vfs] object
  ** that SQLite uses to interact
- Line 5121  int sqlite3_blob_write(sqlite3_blob *, c
+ Line 5670  int sqlite3_blob_write(sqlite3_blob *, c
  ** New VFSes can be registered and existing VFSes can be unregistered.
  ** The following interfaces are provided.
  **
- ** The sqlite3_vfs_find() interface returns a pointer to
+ ** ^The sqlite3_vfs_find() interface returns a pointer to a VFS given its name.
- ** a VFS given its name.  Names are case sensitive.
+ ** ^Names are case sensitive.
- ** Names are zero-terminated UTF-8 strings.
+ ** ^Names are zero-terminated UTF-8 strings.
- ** If there is no match, a NULL
+ ** ^If there is no match, a NULL pointer is returned.
- ** pointer is returned.  If zVfsName is NULL then the default
+ ** ^If zVfsName is NULL then the default VFS is returned.
- ** VFS is returned.
+ **
- **
+ ** ^New VFSes are registered with sqlite3_vfs_register().
- ** New VFSes are registered with sqlite3_vfs_register().
+ ** ^Each new VFS becomes the default VFS if the makeDflt flag is set.
- ** Each new VFS becomes the default VFS if the makeDflt flag is set.
+ ** ^The same VFS can be registered multiple times without injury.
- ** The same VFS can be registered multiple times without injury.
+ ** ^To make an existing VFS into the default VFS, register it again
- ** To make an existing VFS into the default VFS, register it again
  ** with the makeDflt flag set.  If two different VFSes with the
  ** same name are registered, the behavior is undefined.  If a
  ** VFS is registered with a name that is NULL or an empty string,
  ** then the behavior is undefined.
- **
- ** Unregister a VFS with the sqlite3_vfs_unregister() interface.
- ** If the default VFS is unregistered, another VFS is chosen as
- ** the default.  The choice for the new VFS is arbitrary.
- **
- ** INVARIANTS:
- **
- ** {F11203} The [sqlite3_vfs_find(N)] interface returns a pointer to the
- **          registered [sqlite3_vfs] object whose name exactly matches
- **          the zero-terminated UTF-8 string N, or it returns NULL if
- **          there is no match.
- **
- ** {F11206} If the N parameter to [sqlite3_vfs_find(N)] is NULL then
- **          the function returns a pointer to the default [sqlite3_vfs]
- **          object if there is one, or NULL if there is no default
- **          [sqlite3_vfs] object.
  **
- ** {F11209} The [sqlite3_vfs_register(P,F)] interface registers the
+ ** ^Unregister a VFS with the sqlite3_vfs_unregister() interface.
- **          well-formed [sqlite3_vfs] object P using the name given
+ ** ^(If the default VFS is unregistered, another VFS is chosen as
- **          by the zName field of the object.
+ ** the default.  The choice for the new VFS is arbitrary.)^
- **
- ** {F11212} Using the [sqlite3_vfs_register(P,F)] interface to register
- **          the same [sqlite3_vfs] object multiple times is a harmless no-op.
- **
- ** {F11215} The [sqlite3_vfs_register(P,F)] interface makes the
- **          the [sqlite3_vfs] object P the default [sqlite3_vfs] object
- **          if F is non-zero.
- **
- ** {F11218} The [sqlite3_vfs_unregister(P)] interface unregisters the
- **          [sqlite3_vfs] object P so that it is no longer returned by
- **          subsequent calls to [sqlite3_vfs_find()].
  */
- sqlite3_vfs *sqlite3_vfs_find(const char *zVfsName);
+ SQLITE_API sqlite3_vfs *sqlite3_vfs_find(const char *zVfsName);
- int sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
+ SQLITE_API int sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
- int sqlite3_vfs_unregister(sqlite3_vfs*);
+ SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);
  /*
- ** CAPI3REF: Mutexes {F17000}
+ ** CAPI3REF: Mutexes
  **
  ** The SQLite core uses these routines for thread
- ** synchronization.  Though they are intended for internal
+ ** synchronization. Though they are intended for internal
  ** use by SQLite, code that links against SQLite is
  ** permitted to use any of these routines.
  **
  ** The SQLite source code contains multiple implementations
  ** of these mutex routines.  An appropriate implementation
- ** is selected automatically at compile-time.  The following
+ ** is selected automatically at compile-time.  ^(The following
  ** implementations are available in the SQLite core:
  **
  ** <ul>
- ** <li>   SQLITE_MUTEX_OS2
+ ** <li>   SQLITE_MUTEX_PTHREADS
- ** <li>   SQLITE_MUTEX_PTHREAD
  ** <li>   SQLITE_MUTEX_W32
  ** <li>   SQLITE_MUTEX_NOOP
- ** </ul>
+ ** </ul>)^
  **
- ** The SQLITE_MUTEX_NOOP implementation is a set of routines
+ ** ^The SQLITE_MUTEX_NOOP implementation is a set of routines
  ** that does no real locking and is appropriate for use in
- ** a single-threaded application.  The SQLITE_MUTEX_OS2,
+ ** a single-threaded application.  ^The SQLITE_MUTEX_PTHREADS and
- ** SQLITE_MUTEX_PTHREAD, and SQLITE_MUTEX_W32 implementations
+ ** SQLITE_MUTEX_W32 implementations are appropriate for use on Unix
- ** are appropriate for use on os/2, unix, and windows.
+ ** and Windows.
  **
- ** If SQLite is compiled with the SQLITE_MUTEX_APPDEF preprocessor
+ ** ^(If SQLite is compiled with the SQLITE_MUTEX_APPDEF preprocessor
  ** macro defined (with "-DSQLITE_MUTEX_APPDEF=1"), then no mutex
- ** implementation is included with the library.  The
+ ** implementation is included with the library. In this case the
- ** mutex interface routines defined here become external
+ ** application must supply a custom mutex implementation using the
- ** references in the SQLite library for which implementations
+ ** [SQLITE_CONFIG_MUTEX] option of the sqlite3_config() function
- ** must be provided by the application.  This facility allows an
+ ** before calling sqlite3_initialize() or any other public sqlite3_
- ** application that links against SQLite to provide its own mutex
+ ** function that calls sqlite3_initialize().)^
- ** implementation without having to modify the SQLite core.
+ **
- **
+ ** ^The sqlite3_mutex_alloc() routine allocates a new
- ** {F17011} The sqlite3_mutex_alloc() routine allocates a new
+ ** mutex and returns a pointer to it. ^If it returns NULL
- ** mutex and returns a pointer to it. {F17012} If it returns NULL
+ ** that means that a mutex could not be allocated.  ^SQLite
- ** that means that a mutex could not be allocated. {F17013} SQLite
+ ** will unwind its stack and return an error.  ^(The argument
- ** will unwind its stack and return an error. {F17014} The argument
  ** to sqlite3_mutex_alloc() is one of these integer constants:
  **
  ** <ul>
- Line 5221  int sqlite3_vfs_unregister(sqlite3_vfs*)
+ Line 5740  int sqlite3_vfs_unregister(sqlite3_vfs*)
  ** <li>  SQLITE_MUTEX_STATIC_MEM2
  ** <li>  SQLITE_MUTEX_STATIC_PRNG
  ** <li>  SQLITE_MUTEX_STATIC_LRU
- ** </ul> {END}
+ ** <li>  SQLITE_MUTEX_STATIC_LRU2
+ ** </ul>)^
  **
- ** {F17015} The first two constants cause sqlite3_mutex_alloc() to create
+ ** ^The first two constants (SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE)
- ** a new mutex.  The new mutex is recursive when SQLITE_MUTEX_RECURSIVE
+ ** cause sqlite3_mutex_alloc() to create
- ** is used but not necessarily so when SQLITE_MUTEX_FAST is used. {END}
+ ** a new mutex.  ^The new mutex is recursive when SQLITE_MUTEX_RECURSIVE
+ ** is used but not necessarily so when SQLITE_MUTEX_FAST is used.
  ** The mutex implementation does not need to make a distinction
  ** between SQLITE_MUTEX_RECURSIVE and SQLITE_MUTEX_FAST if it does
- ** not want to.  {F17016} But SQLite will only request a recursive mutex in
+ ** not want to.  ^SQLite will only request a recursive mutex in
- ** cases where it really needs one.  {END} If a faster non-recursive mutex
+ ** cases where it really needs one.  ^If a faster non-recursive mutex
  ** implementation is available on the host platform, the mutex subsystem
  ** might return such a mutex in response to SQLITE_MUTEX_FAST.
  **
- ** {F17017} The other allowed parameters to sqlite3_mutex_alloc() each return
+ ** ^The other allowed parameters to sqlite3_mutex_alloc() (anything other
- ** a pointer to a static preexisting mutex. {END}  Four static mutexes are
+ ** than SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE) each return
+ ** a pointer to a static preexisting mutex.  ^Six static mutexes are
  ** used by the current version of SQLite.  Future versions of SQLite
  ** may add additional static mutexes.  Static mutexes are for internal
  ** use by SQLite only.  Applications that use SQLite mutexes should
  ** use only the dynamic mutexes returned by SQLITE_MUTEX_FAST or
  ** SQLITE_MUTEX_RECURSIVE.
  **
- ** {F17018} Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST
+ ** ^Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST
  ** or SQLITE_MUTEX_RECURSIVE) is used then sqlite3_mutex_alloc()
- ** returns a different mutex on every call.  {F17034} But for the static
+ ** returns a different mutex on every call.  ^But for the static
  ** mutex types, the same mutex is returned on every call that has
- ** the same type number. {END}
+ ** the same type number.
  **
- ** {F17019} The sqlite3_mutex_free() routine deallocates a previously
+ ** ^The sqlite3_mutex_free() routine deallocates a previously
- ** allocated dynamic mutex. {F17020} SQLite is careful to deallocate every
+ ** allocated dynamic mutex.  ^SQLite is careful to deallocate every
- ** dynamic mutex that it allocates. {U17021} The dynamic mutexes must not be in
+ ** dynamic mutex that it allocates.  The dynamic mutexes must not be in
- ** use when they are deallocated. {U17022} Attempting to deallocate a static
+ ** use when they are deallocated.  Attempting to deallocate a static
- ** mutex results in undefined behavior. {F17023} SQLite never deallocates
+ ** mutex results in undefined behavior.  ^SQLite never deallocates
- ** a static mutex. {END}
+ ** a static mutex.
  **
- ** The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt
+ ** ^The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt
- ** to enter a mutex. {F17024} If another thread is already within the mutex,
+ ** to enter a mutex.  ^If another thread is already within the mutex,
  ** sqlite3_mutex_enter() will block and sqlite3_mutex_try() will return
- ** SQLITE_BUSY. {F17025}  The sqlite3_mutex_try() interface returns SQLITE_OK
+ ** SQLITE_BUSY.  ^The sqlite3_mutex_try() interface returns [SQLITE_OK]
- ** upon successful entry.  {F17026} Mutexes created using
+ ** upon successful entry.  ^(Mutexes created using
  ** SQLITE_MUTEX_RECURSIVE can be entered multiple times by the same thread.
- ** {F17027} In such cases the,
+ ** In such cases the,
  ** mutex must be exited an equal number of times before another thread
- ** can enter.  {U17028} If the same thread tries to enter any other
+ ** can enter.)^  ^(If the same thread tries to enter any other
  ** kind of mutex more than once, the behavior is undefined.
- ** {F17029} SQLite will never exhibit
+ ** SQLite will never exhibit
- ** such behavior in its own use of mutexes. {END}
+ ** such behavior in its own use of mutexes.)^
  **
- ** Some systems (ex: windows95) do not the operation implemented by
+ ** ^(Some systems (for example, Windows 95) do not support the operation
- ** sqlite3_mutex_try().  On those systems, sqlite3_mutex_try() will
+ ** implemented by sqlite3_mutex_try().  On those systems, sqlite3_mutex_try()
- ** always return SQLITE_BUSY.  {F17030} The SQLite core only ever uses
+ ** will always return SQLITE_BUSY.  The SQLite core only ever uses
- ** sqlite3_mutex_try() as an optimization so this is acceptable behavior. {END}
+ ** sqlite3_mutex_try() as an optimization so this is acceptable behavior.)^
  **
- ** {F17031} The sqlite3_mutex_leave() routine exits a mutex that was
+ ** ^The sqlite3_mutex_leave() routine exits a mutex that was
- ** previously entered by the same thread.  {U17032} The behavior
+ ** previously entered by the same thread.   ^(The behavior
  ** is undefined if the mutex is not currently entered by the
- ** calling thread or is not currently allocated.  {F17033} SQLite will
+ ** calling thread or is not currently allocated.  SQLite will
- ** never do either. {END}
+ ** never do either.)^
+ **
+ ** ^If the argument to sqlite3_mutex_enter(), sqlite3_mutex_try(), or
+ ** sqlite3_mutex_leave() is a NULL pointer, then all three routines
+ ** behave as no-ops.
  **
  ** See also: [sqlite3_mutex_held()] and [sqlite3_mutex_notheld()].
  */
- sqlite3_mutex *sqlite3_mutex_alloc(int);
+ SQLITE_API sqlite3_mutex *sqlite3_mutex_alloc(int);
- void sqlite3_mutex_free(sqlite3_mutex*);
+ SQLITE_API void sqlite3_mutex_free(sqlite3_mutex*);
- void sqlite3_mutex_enter(sqlite3_mutex*);
+ SQLITE_API void sqlite3_mutex_enter(sqlite3_mutex*);
- int sqlite3_mutex_try(sqlite3_mutex*);
+ SQLITE_API int sqlite3_mutex_try(sqlite3_mutex*);
- void sqlite3_mutex_leave(sqlite3_mutex*);
+ SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex*);
+ /*
+ ** CAPI3REF: Mutex Methods Object
+ **
+ ** An instance of this structure defines the low-level routines
+ ** used to allocate and use mutexes.
+ **
+ ** Usually, the default mutex implementations provided by SQLite are
+ ** sufficient, however the user has the option of substituting a custom
+ ** implementation for specialized deployments or systems for which SQLite
+ ** does not provide a suitable implementation. In this case, the user
+ ** creates and populates an instance of this structure to pass
+ ** to sqlite3_config() along with the [SQLITE_CONFIG_MUTEX] option.
+ ** Additionally, an instance of this structure can be used as an
+ ** output variable when querying the system for the current mutex
+ ** implementation, using the [SQLITE_CONFIG_GETMUTEX] option.
+ **
+ ** ^The xMutexInit method defined by this structure is invoked as
+ ** part of system initialization by the sqlite3_initialize() function.
+ ** ^The xMutexInit routine is called by SQLite exactly once for each
+ ** effective call to [sqlite3_initialize()].
+ **
+ ** ^The xMutexEnd method defined by this structure is invoked as
+ ** part of system shutdown by the sqlite3_shutdown() function. The
+ ** implementation of this method is expected to release all outstanding
+ ** resources obtained by the mutex methods implementation, especially
+ ** those obtained by the xMutexInit method.  ^The xMutexEnd()
+ ** interface is invoked exactly once for each call to [sqlite3_shutdown()].
+ **
+ ** ^(The remaining seven methods defined by this structure (xMutexAlloc,
+ ** xMutexFree, xMutexEnter, xMutexTry, xMutexLeave, xMutexHeld and
+ ** xMutexNotheld) implement the following interfaces (respectively):
+ **
+ ** <ul>
+ **   <li>  [sqlite3_mutex_alloc()] </li>
+ **   <li>  [sqlite3_mutex_free()] </li>
+ **   <li>  [sqlite3_mutex_enter()] </li>
+ **   <li>  [sqlite3_mutex_try()] </li>
+ **   <li>  [sqlite3_mutex_leave()] </li>
+ **   <li>  [sqlite3_mutex_held()] </li>
+ **   <li>  [sqlite3_mutex_notheld()] </li>
+ ** </ul>)^
+ **
+ ** The only difference is that the public sqlite3_XXX functions enumerated
+ ** above silently ignore any invocations that pass a NULL pointer instead
+ ** of a valid mutex handle. The implementations of the methods defined
+ ** by this structure are not required to handle this case, the results
+ ** of passing a NULL pointer instead of a valid mutex handle are undefined
+ ** (i.e. it is acceptable to provide an implementation that segfaults if
+ ** it is passed a NULL pointer).
+ **
+ ** The xMutexInit() method must be threadsafe.  ^It must be harmless to
+ ** invoke xMutexInit() multiple times within the same process and without
+ ** intervening calls to xMutexEnd().  Second and subsequent calls to
+ ** xMutexInit() must be no-ops.
+ **
+ ** ^xMutexInit() must not use SQLite memory allocation ([sqlite3_malloc()]
+ ** and its associates).  ^Similarly, xMutexAlloc() must not use SQLite memory
+ ** allocation for a static mutex.  ^However xMutexAlloc() may use SQLite
+ ** memory allocation for a fast or recursive mutex.
+ **
+ ** ^SQLite will invoke the xMutexEnd() method when [sqlite3_shutdown()] is
+ ** called, but only if the prior call to xMutexInit returned SQLITE_OK.
+ ** If xMutexInit fails in any way, it is expected to clean up after itself
+ ** prior to returning.
+ */
+ typedef struct sqlite3_mutex_methods sqlite3_mutex_methods;
+ struct sqlite3_mutex_methods {
+   int (*xMutexInit)(void);
+   int (*xMutexEnd)(void);
+   sqlite3_mutex *(*xMutexAlloc)(int);
+   void (*xMutexFree)(sqlite3_mutex *);
+   void (*xMutexEnter)(sqlite3_mutex *);
+   int (*xMutexTry)(sqlite3_mutex *);
+   void (*xMutexLeave)(sqlite3_mutex *);
+   int (*xMutexHeld)(sqlite3_mutex *);
+   int (*xMutexNotheld)(sqlite3_mutex *);
+ };
  /*
- ** CAPI3REF: Mutex Verifcation Routines {F17080}
+ ** CAPI3REF: Mutex Verification Routines
  **
  ** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routines
- ** are intended for use inside assert() statements. {F17081} The SQLite core
+ ** are intended for use inside assert() statements.  ^The SQLite core
  ** never uses these routines except inside an assert() and applications
- ** are advised to follow the lead of the core.  {F17082} The core only
+ ** are advised to follow the lead of the core.  ^The SQLite core only
  ** provides implementations for these routines when it is compiled
- ** with the SQLITE_DEBUG flag.  {U17087} External mutex implementations
+ ** with the SQLITE_DEBUG flag.  ^External mutex implementations
  ** are only required to provide these routines if SQLITE_DEBUG is
  ** defined and if NDEBUG is not defined.
  **
- ** {F17083} These routines should return true if the mutex in their argument
+ ** ^These routines should return true if the mutex in their argument
- ** is held or not held, respectively, by the calling thread. {END}
+ ** is held or not held, respectively, by the calling thread.
  **
- ** {X17084} The implementation is not required to provided versions of these
+ ** ^The implementation is not required to provide versions of these
- ** routines that actually work.
+ ** routines that actually work. If the implementation does not provide working
- ** If the implementation does not provide working
+ ** versions of these routines, it should at least provide stubs that always
- ** versions of these routines, it should at least provide stubs
+ ** return true so that one does not get spurious assertion failures.
- ** that always return true so that one does not get spurious
+ **
- ** assertion failures. {END}
+ ** ^If the argument to sqlite3_mutex_held() is a NULL pointer then
- **
+ ** the routine should return 1.   This seems counter-intuitive since
- ** {F17085} If the argument to sqlite3_mutex_held() is a NULL pointer then
+ ** clearly the mutex cannot be held if it does not exist.  But
- ** the routine should return 1.  {END} This seems counter-intuitive since
- ** clearly the mutex cannot be held if it does not exist.  But the
  ** the reason the mutex does not exist is because the build is not
  ** using mutexes.  And we do not want the assert() containing the
  ** call to sqlite3_mutex_held() to fail, so a non-zero return is
- ** the appropriate thing to do.  {F17086} The sqlite3_mutex_notheld()
+ ** the appropriate thing to do.  ^The sqlite3_mutex_notheld()
  ** interface should also return 1 when given a NULL pointer.
  */
- int sqlite3_mutex_held(sqlite3_mutex*);
+ #ifndef NDEBUG
- int sqlite3_mutex_notheld(sqlite3_mutex*);
+ SQLITE_API int sqlite3_mutex_held(sqlite3_mutex*);
+ SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex*);
+ #endif
  /*
- ** CAPI3REF: Mutex Types {F17001}
+ ** CAPI3REF: Mutex Types
  **
- ** {F17002} The [sqlite3_mutex_alloc()] interface takes a single argument
+ ** The [sqlite3_mutex_alloc()] interface takes a single argument
- ** which is one of these integer constants. {END}
+ ** which is one of these integer constants.
+ **
+ ** The set of static mutexes may change from one SQLite release to the
+ ** next.  Applications that override the built-in mutex logic must be
+ ** prepared to accommodate additional static mutexes.
  */
  #define SQLITE_MUTEX_FAST             0
  #define SQLITE_MUTEX_RECURSIVE        1
  #define SQLITE_MUTEX_STATIC_MASTER    2
  #define SQLITE_MUTEX_STATIC_MEM       3  /* sqlite3_malloc() */
- #define SQLITE_MUTEX_STATIC_MEM2      4  /* sqlite3_release_memory() */
+ #define SQLITE_MUTEX_STATIC_MEM2      4  /* NOT USED */
+ #define SQLITE_MUTEX_STATIC_OPEN      4  /* sqlite3BtreeOpen() */
  #define SQLITE_MUTEX_STATIC_PRNG      5  /* sqlite3_random() */
  #define SQLITE_MUTEX_STATIC_LRU       6  /* lru page list */
+ #define SQLITE_MUTEX_STATIC_LRU2      7  /* NOT USED */
+ #define SQLITE_MUTEX_STATIC_PMEM      7  /* sqlite3PageMalloc() */
  /*
- ** CAPI3REF: Low-Level Control Of Database Files {F11300}
+ ** CAPI3REF: Retrieve the mutex for a database connection
  **
- ** {F11301} The [sqlite3_file_control()] interface makes a direct call to the
+ ** ^This interface returns a pointer the [sqlite3_mutex] object that
+ ** serializes access to the [database connection] given in the argument
+ ** when the [threading mode] is Serialized.
+ ** ^If the [threading mode] is Single-thread or Multi-thread then this
+ ** routine returns a NULL pointer.
+ */
+ SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3*);
+ /*
+ ** CAPI3REF: Low-Level Control Of Database Files
+ **
+ ** ^The [sqlite3_file_control()] interface makes a direct call to the
  ** xFileControl method for the [sqlite3_io_methods] object associated
- ** with a particular database identified by the second argument. {F11302} The
+ ** with a particular database identified by the second argument. ^The
- ** name of the database is the name assigned to the database by the
+ ** name of the database is "main" for the main database or "temp" for the
- ** <a href="lang_attach.html">ATTACH</a> SQL command that opened the
+ ** TEMP database, or the name that appears after the AS keyword for
- ** database. {F11303} To control the main database file, use the name "main"
+ ** databases that are added using the [ATTACH] SQL command.
- ** or a NULL pointer. {F11304} The third and fourth parameters to this routine
+ ** ^A NULL pointer can be used in place of "main" to refer to the
+ ** main database file.
+ ** ^The third and fourth parameters to this routine
  ** are passed directly through to the second and third parameters of
- ** the xFileControl method.  {F11305} The return value of the xFileControl
+ ** the xFileControl method.  ^The return value of the xFileControl
  ** method becomes the return value of this routine.
  **
- ** {F11306} If the second parameter (zDbName) does not match the name of any
+ ** ^The SQLITE_FCNTL_FILE_POINTER value for the op parameter causes
- ** open database file, then SQLITE_ERROR is returned. {F11307} This error
+ ** a pointer to the underlying [sqlite3_file] object to be written into
+ ** the space pointed to by the 4th parameter.  ^The SQLITE_FCNTL_FILE_POINTER
+ ** case is a short-circuit path which does not actually invoke the
+ ** underlying sqlite3_io_methods.xFileControl method.
+ **
+ ** ^If the second parameter (zDbName) does not match the name of any
+ ** open database file, then SQLITE_ERROR is returned.  ^This error
  ** code is not remembered and will not be recalled by [sqlite3_errcode()]
- ** or [sqlite3_errmsg()]. {U11308} The underlying xFileControl method might
+ ** or [sqlite3_errmsg()].  The underlying xFileControl method might
- ** also return SQLITE_ERROR.  {U11309} There is no way to distinguish between
+ ** also return SQLITE_ERROR.  There is no way to distinguish between
  ** an incorrect zDbName and an SQLITE_ERROR return from the underlying
- ** xFileControl method. {END}
+ ** xFileControl method.
  **
  ** See also: [SQLITE_FCNTL_LOCKSTATE]
  */
- int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
+ SQLITE_API int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
  /*
- ** CAPI3REF: Testing Interface {F11400}
+ ** CAPI3REF: Testing Interface
  **
- ** The sqlite3_test_control() interface is used to read out internal
+ ** ^The sqlite3_test_control() interface is used to read out internal
  ** state of SQLite and to inject faults into SQLite for testing
- ** purposes.  The first parameter a operation code that determines
+ ** purposes.  ^The first parameter is an operation code that determines
  ** the number, meaning, and operation of all subsequent parameters.
  **
  ** This interface is not for use by applications.  It exists solely
- Line 5377  int sqlite3_file_control(sqlite3*, const
+ Line 6007  int sqlite3_file_control(sqlite3*, const
  ** Unlike most of the SQLite API, this function is not guaranteed to
  ** operate consistently from one release to the next.
  */
- int sqlite3_test_control(int op, ...);
+ SQLITE_API int sqlite3_test_control(int op, ...);
  /*
- ** CAPI3REF: Testing Interface Operation Codes {F11410}
+ ** CAPI3REF: Testing Interface Operation Codes
  **
  ** These constants are the valid operation code parameters used
  ** as the first argument to [sqlite3_test_control()].
  **
- ** These parameters and their meansing are subject to change
+ ** These parameters and their meanings are subject to change
  ** without notice.  These values are for testing purposes only.
  ** Applications should not use any of these parameters or the
  ** [sqlite3_test_control()] interface.
  */
- #define SQLITE_TESTCTRL_FAULT_CONFIG             1
+ #define SQLITE_TESTCTRL_FIRST                    5
- #define SQLITE_TESTCTRL_FAULT_FAILURES           2
+ #define SQLITE_TESTCTRL_PRNG_SAVE                5
- #define SQLITE_TESTCTRL_FAULT_BENIGN_FAILURES    3
+ #define SQLITE_TESTCTRL_PRNG_RESTORE             6
- #define SQLITE_TESTCTRL_FAULT_PENDING            4
+ #define SQLITE_TESTCTRL_PRNG_RESET               7
+ #define SQLITE_TESTCTRL_BITVEC_TEST              8
+ #define SQLITE_TESTCTRL_FAULT_INSTALL            9
+ #define SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS     10
+ #define SQLITE_TESTCTRL_PENDING_BYTE            11
+ #define SQLITE_TESTCTRL_ASSERT                  12
+ #define SQLITE_TESTCTRL_ALWAYS                  13
+ #define SQLITE_TESTCTRL_RESERVE                 14
+ #define SQLITE_TESTCTRL_OPTIMIZATIONS           15
+ #define SQLITE_TESTCTRL_ISKEYWORD               16
+ #define SQLITE_TESTCTRL_SCRATCHMALLOC           17
+ #define SQLITE_TESTCTRL_LOCALTIME_FAULT         18
+ #define SQLITE_TESTCTRL_EXPLAIN_STMT            19
+ #define SQLITE_TESTCTRL_LAST                    19
+ /*
+ ** CAPI3REF: SQLite Runtime Status
+ **
+ ** ^This interface is used to retrieve runtime status information
+ ** about the performance of SQLite, and optionally to reset various
+ ** highwater marks.  ^The first argument is an integer code for
+ ** the specific parameter to measure.  ^(Recognized integer codes
+ ** are of the form [status parameters | SQLITE_STATUS_...].)^
+ ** ^The current value of the parameter is returned into *pCurrent.
+ ** ^The highest recorded value is returned in *pHighwater.  ^If the
+ ** resetFlag is true, then the highest record value is reset after
+ ** *pHighwater is written.  ^(Some parameters do not record the highest
+ ** value.  For those parameters
+ ** nothing is written into *pHighwater and the resetFlag is ignored.)^
+ ** ^(Other parameters record only the highwater mark and not the current
+ ** value.  For these latter parameters nothing is written into *pCurrent.)^
+ **
+ ** ^The sqlite3_status() routine returns SQLITE_OK on success and a
+ ** non-zero [error code] on failure.
+ **
+ ** This routine is threadsafe but is not atomic.  This routine can be
+ ** called while other threads are running the same or different SQLite
+ ** interfaces.  However the values returned in *pCurrent and
+ ** *pHighwater reflect the status of SQLite at different points in time
+ ** and it is possible that another thread might change the parameter
+ ** in between the times when *pCurrent and *pHighwater are written.
+ **
+ ** See also: [sqlite3_db_status()]
+ */
+ SQLITE_API int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
+ /*
+ ** CAPI3REF: Status Parameters
+ ** KEYWORDS: {status parameters}
+ **
+ ** These integer constants designate various run-time status parameters
+ ** that can be returned by [sqlite3_status()].
+ **
+ ** <dl>
+ ** [[SQLITE_STATUS_MEMORY_USED]] ^(<dt>SQLITE_STATUS_MEMORY_USED</dt>
+ ** <dd>This parameter is the current amount of memory checked out
+ ** using [sqlite3_malloc()], either directly or indirectly.  The
+ ** figure includes calls made to [sqlite3_malloc()] by the application
+ ** and internal memory usage by the SQLite library.  Scratch memory
+ ** controlled by [SQLITE_CONFIG_SCRATCH] and auxiliary page-cache
+ ** memory controlled by [SQLITE_CONFIG_PAGECACHE] is not included in
+ ** this parameter.  The amount returned is the sum of the allocation
+ ** sizes as reported by the xSize method in [sqlite3_mem_methods].</dd>)^
+ **
+ ** [[SQLITE_STATUS_MALLOC_SIZE]] ^(<dt>SQLITE_STATUS_MALLOC_SIZE</dt>
+ ** <dd>This parameter records the largest memory allocation request
+ ** handed to [sqlite3_malloc()] or [sqlite3_realloc()] (or their
+ ** internal equivalents).  Only the value returned in the
+ ** *pHighwater parameter to [sqlite3_status()] is of interest.
+ ** The value written into the *pCurrent parameter is undefined.</dd>)^
+ **
+ ** [[SQLITE_STATUS_MALLOC_COUNT]] ^(<dt>SQLITE_STATUS_MALLOC_COUNT</dt>
+ ** <dd>This parameter records the number of separate memory allocations
+ ** currently checked out.</dd>)^
+ **
+ ** [[SQLITE_STATUS_PAGECACHE_USED]] ^(<dt>SQLITE_STATUS_PAGECACHE_USED</dt>
+ ** <dd>This parameter returns the number of pages used out of the
+ ** [pagecache memory allocator] that was configured using
+ ** [SQLITE_CONFIG_PAGECACHE].  The
+ ** value returned is in pages, not in bytes.</dd>)^
+ **
+ ** [[SQLITE_STATUS_PAGECACHE_OVERFLOW]]
+ ** ^(<dt>SQLITE_STATUS_PAGECACHE_OVERFLOW</dt>
+ ** <dd>This parameter returns the number of bytes of page cache
+ ** allocation which could not be satisfied by the [SQLITE_CONFIG_PAGECACHE]
+ ** buffer and where forced to overflow to [sqlite3_malloc()].  The
+ ** returned value includes allocations that overflowed because they
+ ** where too large (they were larger than the "sz" parameter to
+ ** [SQLITE_CONFIG_PAGECACHE]) and allocations that overflowed because
+ ** no space was left in the page cache.</dd>)^
+ **
+ ** [[SQLITE_STATUS_PAGECACHE_SIZE]] ^(<dt>SQLITE_STATUS_PAGECACHE_SIZE</dt>
+ ** <dd>This parameter records the largest memory allocation request
+ ** handed to [pagecache memory allocator].  Only the value returned in the
+ ** *pHighwater parameter to [sqlite3_status()] is of interest.
+ ** The value written into the *pCurrent parameter is undefined.</dd>)^
+ **
+ ** [[SQLITE_STATUS_SCRATCH_USED]] ^(<dt>SQLITE_STATUS_SCRATCH_USED</dt>
+ ** <dd>This parameter returns the number of allocations used out of the
+ ** [scratch memory allocator] configured using
+ ** [SQLITE_CONFIG_SCRATCH].  The value returned is in allocations, not
+ ** in bytes.  Since a single thread may only have one scratch allocation
+ ** outstanding at time, this parameter also reports the number of threads
+ ** using scratch memory at the same time.</dd>)^
+ **
+ ** [[SQLITE_STATUS_SCRATCH_OVERFLOW]] ^(<dt>SQLITE_STATUS_SCRATCH_OVERFLOW</dt>
+ ** <dd>This parameter returns the number of bytes of scratch memory
+ ** allocation which could not be satisfied by the [SQLITE_CONFIG_SCRATCH]
+ ** buffer and where forced to overflow to [sqlite3_malloc()].  The values
+ ** returned include overflows because the requested allocation was too
+ ** larger (that is, because the requested allocation was larger than the
+ ** "sz" parameter to [SQLITE_CONFIG_SCRATCH]) and because no scratch buffer
+ ** slots were available.
+ ** </dd>)^
+ **
+ ** [[SQLITE_STATUS_SCRATCH_SIZE]] ^(<dt>SQLITE_STATUS_SCRATCH_SIZE</dt>
+ ** <dd>This parameter records the largest memory allocation request
+ ** handed to [scratch memory allocator].  Only the value returned in the
+ ** *pHighwater parameter to [sqlite3_status()] is of interest.
+ ** The value written into the *pCurrent parameter is undefined.</dd>)^
+ **
+ ** [[SQLITE_STATUS_PARSER_STACK]] ^(<dt>SQLITE_STATUS_PARSER_STACK</dt>
+ ** <dd>This parameter records the deepest parser stack.  It is only
+ ** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].</dd>)^
+ ** </dl>
+ **
+ ** New status parameters may be added from time to time.
+ */
+ #define SQLITE_STATUS_MEMORY_USED          0
+ #define SQLITE_STATUS_PAGECACHE_USED       1
+ #define SQLITE_STATUS_PAGECACHE_OVERFLOW   2
+ #define SQLITE_STATUS_SCRATCH_USED         3
+ #define SQLITE_STATUS_SCRATCH_OVERFLOW     4
+ #define SQLITE_STATUS_MALLOC_SIZE          5
+ #define SQLITE_STATUS_PARSER_STACK         6
+ #define SQLITE_STATUS_PAGECACHE_SIZE       7
+ #define SQLITE_STATUS_SCRATCH_SIZE         8
+ #define SQLITE_STATUS_MALLOC_COUNT         9
+ /*
+ ** CAPI3REF: Database Connection Status
+ **
+ ** ^This interface is used to retrieve runtime status information
+ ** about a single [database connection].  ^The first argument is the
+ ** database connection object to be interrogated.  ^The second argument
+ ** is an integer constant, taken from the set of
+ ** [SQLITE_DBSTATUS options], that
+ ** determines the parameter to interrogate.  The set of
+ ** [SQLITE_DBSTATUS options] is likely
+ ** to grow in future releases of SQLite.
+ **
+ ** ^The current value of the requested parameter is written into *pCur
+ ** and the highest instantaneous value is written into *pHiwtr.  ^If
+ ** the resetFlg is true, then the highest instantaneous value is
+ ** reset back down to the current value.
+ **
+ ** ^The sqlite3_db_status() routine returns SQLITE_OK on success and a
+ ** non-zero [error code] on failure.
+ **
+ ** See also: [sqlite3_status()] and [sqlite3_stmt_status()].
+ */
+ SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);
+ /*
+ ** CAPI3REF: Status Parameters for database connections
+ ** KEYWORDS: {SQLITE_DBSTATUS options}
+ **
+ ** These constants are the available integer "verbs" that can be passed as
+ ** the second argument to the [sqlite3_db_status()] interface.
+ **
+ ** New verbs may be added in future releases of SQLite. Existing verbs
+ ** might be discontinued. Applications should check the return code from
+ ** [sqlite3_db_status()] to make sure that the call worked.
+ ** The [sqlite3_db_status()] interface will return a non-zero error code
+ ** if a discontinued or unsupported verb is invoked.
+ **
+ ** <dl>
+ ** [[SQLITE_DBSTATUS_LOOKASIDE_USED]] ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_USED</dt>
+ ** <dd>This parameter returns the number of lookaside memory slots currently
+ ** checked out.</dd>)^
+ **
+ ** [[SQLITE_DBSTATUS_LOOKASIDE_HIT]] ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_HIT</dt>
+ ** <dd>This parameter returns the number malloc attempts that were
+ ** satisfied using lookaside memory. Only the high-water value is meaningful;
+ ** the current value is always zero.)^
+ **
+ ** [[SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE]]
+ ** ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE</dt>
+ ** <dd>This parameter returns the number malloc attempts that might have
+ ** been satisfied using lookaside memory but failed due to the amount of
+ ** memory requested being larger than the lookaside slot size.
+ ** Only the high-water value is meaningful;
+ ** the current value is always zero.)^
+ **
+ ** [[SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL]]
+ ** ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL</dt>
+ ** <dd>This parameter returns the number malloc attempts that might have
+ ** been satisfied using lookaside memory but failed due to all lookaside
+ ** memory already being in use.
+ ** Only the high-water value is meaningful;
+ ** the current value is always zero.)^
+ **
+ ** [[SQLITE_DBSTATUS_CACHE_USED]] ^(<dt>SQLITE_DBSTATUS_CACHE_USED</dt>
+ ** <dd>This parameter returns the approximate number of of bytes of heap
+ ** memory used by all pager caches associated with the database connection.)^
+ ** ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_USED is always 0.
+ **
+ ** [[SQLITE_DBSTATUS_SCHEMA_USED]] ^(<dt>SQLITE_DBSTATUS_SCHEMA_USED</dt>
+ ** <dd>This parameter returns the approximate number of of bytes of heap
+ ** memory used to store the schema for all databases associated
+ ** with the connection - main, temp, and any [ATTACH]-ed databases.)^
+ ** ^The full amount of memory used by the schemas is reported, even if the
+ ** schema memory is shared with other database connections due to
+ ** [shared cache mode] being enabled.
+ ** ^The highwater mark associated with SQLITE_DBSTATUS_SCHEMA_USED is always 0.
+ **
+ ** [[SQLITE_DBSTATUS_STMT_USED]] ^(<dt>SQLITE_DBSTATUS_STMT_USED</dt>
+ ** <dd>This parameter returns the approximate number of of bytes of heap
+ ** and lookaside memory used by all prepared statements associated with
+ ** the database connection.)^
+ ** ^The highwater mark associated with SQLITE_DBSTATUS_STMT_USED is always 0.
+ ** </dd>
+ **
+ ** [[SQLITE_DBSTATUS_CACHE_HIT]] ^(<dt>SQLITE_DBSTATUS_CACHE_HIT</dt>
+ ** <dd>This parameter returns the number of pager cache hits that have
+ ** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_HIT
+ ** is always 0.
+ ** </dd>
+ **
+ ** [[SQLITE_DBSTATUS_CACHE_MISS]] ^(<dt>SQLITE_DBSTATUS_CACHE_MISS</dt>
+ ** <dd>This parameter returns the number of pager cache misses that have
+ ** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_MISS
+ ** is always 0.
+ ** </dd>
+ **
+ ** [[SQLITE_DBSTATUS_CACHE_WRITE]] ^(<dt>SQLITE_DBSTATUS_CACHE_WRITE</dt>
+ ** <dd>This parameter returns the number of dirty cache entries that have
+ ** been written to disk. Specifically, the number of pages written to the
+ ** wal file in wal mode databases, or the number of pages written to the
+ ** database file in rollback mode databases. Any pages written as part of
+ ** transaction rollback or database recovery operations are not included.
+ ** If an IO or other error occurs while writing a page to disk, the effect
+ ** on subsequent SQLITE_DBSTATUS_CACHE_WRITE requests is undefined.)^ ^The
+ ** highwater mark associated with SQLITE_DBSTATUS_CACHE_WRITE is always 0.
+ ** </dd>
+ **
+ ** [[SQLITE_DBSTATUS_DEFERRED_FKS]] ^(<dt>SQLITE_DBSTATUS_DEFERRED_FKS</dt>
+ ** <dd>This parameter returns zero for the current value if and only if
+ ** all foreign key constraints (deferred or immediate) have been
+ ** resolved.)^  ^The highwater mark is always 0.
+ ** </dd>
+ ** </dl>
+ */
+ #define SQLITE_DBSTATUS_LOOKASIDE_USED       0
+ #define SQLITE_DBSTATUS_CACHE_USED           1
+ #define SQLITE_DBSTATUS_SCHEMA_USED          2
+ #define SQLITE_DBSTATUS_STMT_USED            3
+ #define SQLITE_DBSTATUS_LOOKASIDE_HIT        4
+ #define SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE  5
+ #define SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL  6
+ #define SQLITE_DBSTATUS_CACHE_HIT            7
+ #define SQLITE_DBSTATUS_CACHE_MISS           8
+ #define SQLITE_DBSTATUS_CACHE_WRITE          9
+ #define SQLITE_DBSTATUS_DEFERRED_FKS        10
+ #define SQLITE_DBSTATUS_MAX                 10   /* Largest defined DBSTATUS */
+ /*
+ ** CAPI3REF: Prepared Statement Status
+ **
+ ** ^(Each prepared statement maintains various
+ ** [SQLITE_STMTSTATUS counters] that measure the number
+ ** of times it has performed specific operations.)^  These counters can
+ ** be used to monitor the performance characteristics of the prepared
+ ** statements.  For example, if the number of table steps greatly exceeds
+ ** the number of table searches or result rows, that would tend to indicate
+ ** that the prepared statement is using a full table scan rather than
+ ** an index.
+ **
+ ** ^(This interface is used to retrieve and reset counter values from
+ ** a [prepared statement].  The first argument is the prepared statement
+ ** object to be interrogated.  The second argument
+ ** is an integer code for a specific [SQLITE_STMTSTATUS counter]
+ ** to be interrogated.)^
+ ** ^The current value of the requested counter is returned.
+ ** ^If the resetFlg is true, then the counter is reset to zero after this
+ ** interface call returns.
+ **
+ ** See also: [sqlite3_status()] and [sqlite3_db_status()].
+ */
+ SQLITE_API int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);
+ /*
+ ** CAPI3REF: Status Parameters for prepared statements
+ ** KEYWORDS: {SQLITE_STMTSTATUS counter} {SQLITE_STMTSTATUS counters}
+ **
+ ** These preprocessor macros define integer codes that name counter
+ ** values associated with the [sqlite3_stmt_status()] interface.
+ ** The meanings of the various counters are as follows:
+ **
+ ** <dl>
+ ** [[SQLITE_STMTSTATUS_FULLSCAN_STEP]] <dt>SQLITE_STMTSTATUS_FULLSCAN_STEP</dt>
+ ** <dd>^This is the number of times that SQLite has stepped forward in
+ ** a table as part of a full table scan.  Large numbers for this counter
+ ** may indicate opportunities for performance improvement through
+ ** careful use of indices.</dd>
+ **
+ ** [[SQLITE_STMTSTATUS_SORT]] <dt>SQLITE_STMTSTATUS_SORT</dt>
+ ** <dd>^This is the number of sort operations that have occurred.
+ ** A non-zero value in this counter may indicate an opportunity to
+ ** improvement performance through careful use of indices.</dd>
+ **
+ ** [[SQLITE_STMTSTATUS_AUTOINDEX]] <dt>SQLITE_STMTSTATUS_AUTOINDEX</dt>
+ ** <dd>^This is the number of rows inserted into transient indices that
+ ** were created automatically in order to help joins run faster.
+ ** A non-zero value in this counter may indicate an opportunity to
+ ** improvement performance by adding permanent indices that do not
+ ** need to be reinitialized each time the statement is run.</dd>
+ **
+ ** [[SQLITE_STMTSTATUS_VM_STEP]] <dt>SQLITE_STMTSTATUS_VM_STEP</dt>
+ ** <dd>^This is the number of virtual machine operations executed
+ ** by the prepared statement if that number is less than or equal
+ ** to 2147483647.  The number of virtual machine operations can be
+ ** used as a proxy for the total work done by the prepared statement.
+ ** If the number of virtual machine operations exceeds 2147483647
+ ** then the value returned by this statement status code is undefined.
+ ** </dd>
+ ** </dl>
+ */
+ #define SQLITE_STMTSTATUS_FULLSCAN_STEP     1
+ #define SQLITE_STMTSTATUS_SORT              2
+ #define SQLITE_STMTSTATUS_AUTOINDEX         3
+ #define SQLITE_STMTSTATUS_VM_STEP           4
+ /*
+ ** CAPI3REF: Custom Page Cache Object
+ **
+ ** The sqlite3_pcache type is opaque.  It is implemented by
+ ** the pluggable module.  The SQLite core has no knowledge of
+ ** its size or internal structure and never deals with the
+ ** sqlite3_pcache object except by holding and passing pointers
+ ** to the object.
+ **
+ ** See [sqlite3_pcache_methods2] for additional information.
+ */
+ typedef struct sqlite3_pcache sqlite3_pcache;
+ /*
+ ** CAPI3REF: Custom Page Cache Object
+ **
+ ** The sqlite3_pcache_page object represents a single page in the
+ ** page cache.  The page cache will allocate instances of this
+ ** object.  Various methods of the page cache use pointers to instances
+ ** of this object as parameters or as their return value.
+ **
+ ** See [sqlite3_pcache_methods2] for additional information.
+ */
+ typedef struct sqlite3_pcache_page sqlite3_pcache_page;
+ struct sqlite3_pcache_page {
+   void *pBuf;        /* The content of the page */
+   void *pExtra;      /* Extra information associated with the page */
+ };
+ /*
+ ** CAPI3REF: Application Defined Page Cache.
+ ** KEYWORDS: {page cache}
+ **
+ ** ^(The [sqlite3_config]([SQLITE_CONFIG_PCACHE2], ...) interface can
+ ** register an alternative page cache implementation by passing in an
+ ** instance of the sqlite3_pcache_methods2 structure.)^
+ ** In many applications, most of the heap memory allocated by
+ ** SQLite is used for the page cache.
+ ** By implementing a
+ ** custom page cache using this API, an application can better control
+ ** the amount of memory consumed by SQLite, the way in which
+ ** that memory is allocated and released, and the policies used to
+ ** determine exactly which parts of a database file are cached and for
+ ** how long.
+ **
+ ** The alternative page cache mechanism is an
+ ** extreme measure that is only needed by the most demanding applications.
+ ** The built-in page cache is recommended for most uses.
+ **
+ ** ^(The contents of the sqlite3_pcache_methods2 structure are copied to an
+ ** internal buffer by SQLite within the call to [sqlite3_config].  Hence
+ ** the application may discard the parameter after the call to
+ ** [sqlite3_config()] returns.)^
+ **
+ ** [[the xInit() page cache method]]
+ ** ^(The xInit() method is called once for each effective
+ ** call to [sqlite3_initialize()])^
+ ** (usually only once during the lifetime of the process). ^(The xInit()
+ ** method is passed a copy of the sqlite3_pcache_methods2.pArg value.)^
+ ** The intent of the xInit() method is to set up global data structures
+ ** required by the custom page cache implementation.
+ ** ^(If the xInit() method is NULL, then the
+ ** built-in default page cache is used instead of the application defined
+ ** page cache.)^
+ **
+ ** [[the xShutdown() page cache method]]
+ ** ^The xShutdown() method is called by [sqlite3_shutdown()].
+ ** It can be used to clean up
+ ** any outstanding resources before process shutdown, if required.
+ ** ^The xShutdown() method may be NULL.
+ **
+ ** ^SQLite automatically serializes calls to the xInit method,
+ ** so the xInit method need not be threadsafe.  ^The
+ ** xShutdown method is only called from [sqlite3_shutdown()] so it does
+ ** not need to be threadsafe either.  All other methods must be threadsafe
+ ** in multithreaded applications.
+ **
+ ** ^SQLite will never invoke xInit() more than once without an intervening
+ ** call to xShutdown().
+ **
+ ** [[the xCreate() page cache methods]]
+ ** ^SQLite invokes the xCreate() method to construct a new cache instance.
+ ** SQLite will typically create one cache instance for each open database file,
+ ** though this is not guaranteed. ^The
+ ** first parameter, szPage, is the size in bytes of the pages that must
+ ** be allocated by the cache.  ^szPage will always a power of two.  ^The
+ ** second parameter szExtra is a number of bytes of extra storage
+ ** associated with each page cache entry.  ^The szExtra parameter will
+ ** a number less than 250.  SQLite will use the
+ ** extra szExtra bytes on each page to store metadata about the underlying
+ ** database page on disk.  The value passed into szExtra depends
+ ** on the SQLite version, the target platform, and how SQLite was compiled.
+ ** ^The third argument to xCreate(), bPurgeable, is true if the cache being
+ ** created will be used to cache database pages of a file stored on disk, or
+ ** false if it is used for an in-memory database. The cache implementation
+ ** does not have to do anything special based with the value of bPurgeable;
+ ** it is purely advisory.  ^On a cache where bPurgeable is false, SQLite will
+ ** never invoke xUnpin() except to deliberately delete a page.
+ ** ^In other words, calls to xUnpin() on a cache with bPurgeable set to
+ ** false will always have the "discard" flag set to true.
+ ** ^Hence, a cache created with bPurgeable false will
+ ** never contain any unpinned pages.
+ **
+ ** [[the xCachesize() page cache method]]
+ ** ^(The xCachesize() method may be called at any time by SQLite to set the
+ ** suggested maximum cache-size (number of pages stored by) the cache
+ ** instance passed as the first argument. This is the value configured using
+ ** the SQLite "[PRAGMA cache_size]" command.)^  As with the bPurgeable
+ ** parameter, the implementation is not required to do anything with this
+ ** value; it is advisory only.
+ **
+ ** [[the xPagecount() page cache methods]]
+ ** The xPagecount() method must return the number of pages currently
+ ** stored in the cache, both pinned and unpinned.
+ **
+ ** [[the xFetch() page cache methods]]
+ ** The xFetch() method locates a page in the cache and returns a pointer to
+ ** an sqlite3_pcache_page object associated with that page, or a NULL pointer.
+ ** The pBuf element of the returned sqlite3_pcache_page object will be a
+ ** pointer to a buffer of szPage bytes used to store the content of a
+ ** single database page.  The pExtra element of sqlite3_pcache_page will be
+ ** a pointer to the szExtra bytes of extra storage that SQLite has requested
+ ** for each entry in the page cache.
+ **
+ ** The page to be fetched is determined by the key. ^The minimum key value
+ ** is 1.  After it has been retrieved using xFetch, the page is considered
+ ** to be "pinned".
+ **
+ ** If the requested page is already in the page cache, then the page cache
+ ** implementation must return a pointer to the page buffer with its content
+ ** intact.  If the requested page is not already in the cache, then the
+ ** cache implementation should use the value of the createFlag
+ ** parameter to help it determined what action to take:
+ **
+ ** <table border=1 width=85% align=center>
+ ** <tr><th> createFlag <th> Behavior when page is not already in cache
+ ** <tr><td> 0 <td> Do not allocate a new page.  Return NULL.
+ ** <tr><td> 1 <td> Allocate a new page if it easy and convenient to do so.
+ **                 Otherwise return NULL.
+ ** <tr><td> 2 <td> Make every effort to allocate a new page.  Only return
+ **                 NULL if allocating a new page is effectively impossible.
+ ** </table>
+ **
+ ** ^(SQLite will normally invoke xFetch() with a createFlag of 0 or 1.  SQLite
+ ** will only use a createFlag of 2 after a prior call with a createFlag of 1
+ ** failed.)^  In between the to xFetch() calls, SQLite may
+ ** attempt to unpin one or more cache pages by spilling the content of
+ ** pinned pages to disk and synching the operating system disk cache.
+ **
+ ** [[the xUnpin() page cache method]]
+ ** ^xUnpin() is called by SQLite with a pointer to a currently pinned page
+ ** as its second argument.  If the third parameter, discard, is non-zero,
+ ** then the page must be evicted from the cache.
+ ** ^If the discard parameter is
+ ** zero, then the page may be discarded or retained at the discretion of
+ ** page cache implementation. ^The page cache implementation
+ ** may choose to evict unpinned pages at any time.
+ **
+ ** The cache must not perform any reference counting. A single
+ ** call to xUnpin() unpins the page regardless of the number of prior calls
+ ** to xFetch().
+ **
+ ** [[the xRekey() page cache methods]]
+ ** The xRekey() method is used to change the key value associated with the
+ ** page passed as the second argument. If the cache
+ ** previously contains an entry associated with newKey, it must be
+ ** discarded. ^Any prior cache entry associated with newKey is guaranteed not
+ ** to be pinned.
+ **
+ ** When SQLite calls the xTruncate() method, the cache must discard all
+ ** existing cache entries with page numbers (keys) greater than or equal
+ ** to the value of the iLimit parameter passed to xTruncate(). If any
+ ** of these pages are pinned, they are implicitly unpinned, meaning that
+ ** they can be safely discarded.
+ **
+ ** [[the xDestroy() page cache method]]
+ ** ^The xDestroy() method is used to delete a cache allocated by xCreate().
+ ** All resources associated with the specified cache should be freed. ^After
+ ** calling the xDestroy() method, SQLite considers the [sqlite3_pcache*]
+ ** handle invalid, and will not use it with any other sqlite3_pcache_methods2
+ ** functions.
+ **
+ ** [[the xShrink() page cache method]]
+ ** ^SQLite invokes the xShrink() method when it wants the page cache to
+ ** free up as much of heap memory as possible.  The page cache implementation
+ ** is not obligated to free any memory, but well-behaved implementations should
+ ** do their best.
+ */
+ typedef struct sqlite3_pcache_methods2 sqlite3_pcache_methods2;
+ struct sqlite3_pcache_methods2 {
+   int iVersion;
+   void *pArg;
+   int (*xInit)(void*);
+   void (*xShutdown)(void*);
+   sqlite3_pcache *(*xCreate)(int szPage, int szExtra, int bPurgeable);
+   void (*xCachesize)(sqlite3_pcache*, int nCachesize);
+   int (*xPagecount)(sqlite3_pcache*);
+   sqlite3_pcache_page *(*xFetch)(sqlite3_pcache*, unsigned key, int createFlag);
+   void (*xUnpin)(sqlite3_pcache*, sqlite3_pcache_page*, int discard);
+   void (*xRekey)(sqlite3_pcache*, sqlite3_pcache_page*,
+       unsigned oldKey, unsigned newKey);
+   void (*xTruncate)(sqlite3_pcache*, unsigned iLimit);
+   void (*xDestroy)(sqlite3_pcache*);
+   void (*xShrink)(sqlite3_pcache*);
+ };
+ /*
+ ** This is the obsolete pcache_methods object that has now been replaced
+ ** by sqlite3_pcache_methods2.  This object is not used by SQLite.  It is
+ ** retained in the header file for backwards compatibility only.
+ */
+ typedef struct sqlite3_pcache_methods sqlite3_pcache_methods;
+ struct sqlite3_pcache_methods {
+   void *pArg;
+   int (*xInit)(void*);
+   void (*xShutdown)(void*);
+   sqlite3_pcache *(*xCreate)(int szPage, int bPurgeable);
+   void (*xCachesize)(sqlite3_pcache*, int nCachesize);
+   int (*xPagecount)(sqlite3_pcache*);
+   void *(*xFetch)(sqlite3_pcache*, unsigned key, int createFlag);
+   void (*xUnpin)(sqlite3_pcache*, void*, int discard);
+   void (*xRekey)(sqlite3_pcache*, void*, unsigned oldKey, unsigned newKey);
+   void (*xTruncate)(sqlite3_pcache*, unsigned iLimit);
+   void (*xDestroy)(sqlite3_pcache*);
+ };
+ /*
+ ** CAPI3REF: Online Backup Object
+ **
+ ** The sqlite3_backup object records state information about an ongoing
+ ** online backup operation.  ^The sqlite3_backup object is created by
+ ** a call to [sqlite3_backup_init()] and is destroyed by a call to
+ ** [sqlite3_backup_finish()].
+ **
+ ** See Also: [Using the SQLite Online Backup API]
+ */
+ typedef struct sqlite3_backup sqlite3_backup;
+ /*
+ ** CAPI3REF: Online Backup API.
+ **
+ ** The backup API copies the content of one database into another.
+ ** It is useful either for creating backups of databases or
+ ** for copying in-memory databases to or from persistent files.
+ **
+ ** See Also: [Using the SQLite Online Backup API]
+ **
+ ** ^SQLite holds a write transaction open on the destination database file
+ ** for the duration of the backup operation.
+ ** ^The source database is read-locked only while it is being read;
+ ** it is not locked continuously for the entire backup operation.
+ ** ^Thus, the backup may be performed on a live source database without
+ ** preventing other database connections from
+ ** reading or writing to the source database while the backup is underway.
+ **
+ ** ^(To perform a backup operation:
+ **   <ol>
+ **     <li><b>sqlite3_backup_init()</b> is called once to initialize the
+ **         backup,
+ **     <li><b>sqlite3_backup_step()</b> is called one or more times to transfer
+ **         the data between the two databases, and finally
+ **     <li><b>sqlite3_backup_finish()</b> is called to release all resources
+ **         associated with the backup operation.
+ **   </ol>)^
+ ** There should be exactly one call to sqlite3_backup_finish() for each
+ ** successful call to sqlite3_backup_init().
+ **
+ ** [[sqlite3_backup_init()]] <b>sqlite3_backup_init()</b>
+ **
+ ** ^The D and N arguments to sqlite3_backup_init(D,N,S,M) are the
+ ** [database connection] associated with the destination database
+ ** and the database name, respectively.
+ ** ^The database name is "main" for the main database, "temp" for the
+ ** temporary database, or the name specified after the AS keyword in
+ ** an [ATTACH] statement for an attached database.
+ ** ^The S and M arguments passed to
+ ** sqlite3_backup_init(D,N,S,M) identify the [database connection]
+ ** and database name of the source database, respectively.
+ ** ^The source and destination [database connections] (parameters S and D)
+ ** must be different or else sqlite3_backup_init(D,N,S,M) will fail with
+ ** an error.
+ **
+ ** ^If an error occurs within sqlite3_backup_init(D,N,S,M), then NULL is
+ ** returned and an error code and error message are stored in the
+ ** destination [database connection] D.
+ ** ^The error code and message for the failed call to sqlite3_backup_init()
+ ** can be retrieved using the [sqlite3_errcode()], [sqlite3_errmsg()], and/or
+ ** [sqlite3_errmsg16()] functions.
+ ** ^A successful call to sqlite3_backup_init() returns a pointer to an
+ ** [sqlite3_backup] object.
+ ** ^The [sqlite3_backup] object may be used with the sqlite3_backup_step() and
+ ** sqlite3_backup_finish() functions to perform the specified backup
+ ** operation.
+ **
+ ** [[sqlite3_backup_step()]] <b>sqlite3_backup_step()</b>
+ **
+ ** ^Function sqlite3_backup_step(B,N) will copy up to N pages between
+ ** the source and destination databases specified by [sqlite3_backup] object B.
+ ** ^If N is negative, all remaining source pages are copied.
+ ** ^If sqlite3_backup_step(B,N) successfully copies N pages and there
+ ** are still more pages to be copied, then the function returns [SQLITE_OK].
+ ** ^If sqlite3_backup_step(B,N) successfully finishes copying all pages
+ ** from source to destination, then it returns [SQLITE_DONE].
+ ** ^If an error occurs while running sqlite3_backup_step(B,N),
+ ** then an [error code] is returned. ^As well as [SQLITE_OK] and
+ ** [SQLITE_DONE], a call to sqlite3_backup_step() may return [SQLITE_READONLY],
+ ** [SQLITE_NOMEM], [SQLITE_BUSY], [SQLITE_LOCKED], or an
+ ** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX] extended error code.
+ **
+ ** ^(The sqlite3_backup_step() might return [SQLITE_READONLY] if
+ ** <ol>
+ ** <li> the destination database was opened read-only, or
+ ** <li> the destination database is using write-ahead-log journaling
+ ** and the destination and source page sizes differ, or
+ ** <li> the destination database is an in-memory database and the
+ ** destination and source page sizes differ.
+ ** </ol>)^
+ **
+ ** ^If sqlite3_backup_step() cannot obtain a required file-system lock, then
+ ** the [sqlite3_busy_handler | busy-handler function]
+ ** is invoked (if one is specified). ^If the
+ ** busy-handler returns non-zero before the lock is available, then
+ ** [SQLITE_BUSY] is returned to the caller. ^In this case the call to
+ ** sqlite3_backup_step() can be retried later. ^If the source
+ ** [database connection]
+ ** is being used to write to the source database when sqlite3_backup_step()
+ ** is called, then [SQLITE_LOCKED] is returned immediately. ^Again, in this
+ ** case the call to sqlite3_backup_step() can be retried later on. ^(If
+ ** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX], [SQLITE_NOMEM], or
+ ** [SQLITE_READONLY] is returned, then
+ ** there is no point in retrying the call to sqlite3_backup_step(). These
+ ** errors are considered fatal.)^  The application must accept
+ ** that the backup operation has failed and pass the backup operation handle
+ ** to the sqlite3_backup_finish() to release associated resources.
+ **
+ ** ^The first call to sqlite3_backup_step() obtains an exclusive lock
+ ** on the destination file. ^The exclusive lock is not released until either
+ ** sqlite3_backup_finish() is called or the backup operation is complete
+ ** and sqlite3_backup_step() returns [SQLITE_DONE].  ^Every call to
+ ** sqlite3_backup_step() obtains a [shared lock] on the source database that
+ ** lasts for the duration of the sqlite3_backup_step() call.
+ ** ^Because the source database is not locked between calls to
+ ** sqlite3_backup_step(), the source database may be modified mid-way
+ ** through the backup process.  ^If the source database is modified by an
+ ** external process or via a database connection other than the one being
+ ** used by the backup operation, then the backup will be automatically
+ ** restarted by the next call to sqlite3_backup_step(). ^If the source
+ ** database is modified by the using the same database connection as is used
+ ** by the backup operation, then the backup database is automatically
+ ** updated at the same time.
+ **
+ ** [[sqlite3_backup_finish()]] <b>sqlite3_backup_finish()</b>
+ **
+ ** When sqlite3_backup_step() has returned [SQLITE_DONE], or when the
+ ** application wishes to abandon the backup operation, the application
+ ** should destroy the [sqlite3_backup] by passing it to sqlite3_backup_finish().
+ ** ^The sqlite3_backup_finish() interfaces releases all
+ ** resources associated with the [sqlite3_backup] object.
+ ** ^If sqlite3_backup_step() has not yet returned [SQLITE_DONE], then any
+ ** active write-transaction on the destination database is rolled back.
+ ** The [sqlite3_backup] object is invalid
+ ** and may not be used following a call to sqlite3_backup_finish().
+ **
+ ** ^The value returned by sqlite3_backup_finish is [SQLITE_OK] if no
+ ** sqlite3_backup_step() errors occurred, regardless or whether or not
+ ** sqlite3_backup_step() completed.
+ ** ^If an out-of-memory condition or IO error occurred during any prior
+ ** sqlite3_backup_step() call on the same [sqlite3_backup] object, then
+ ** sqlite3_backup_finish() returns the corresponding [error code].
+ **
+ ** ^A return of [SQLITE_BUSY] or [SQLITE_LOCKED] from sqlite3_backup_step()
+ ** is not a permanent error and does not affect the return value of
+ ** sqlite3_backup_finish().
+ **
+ ** [[sqlite3_backup__remaining()]] [[sqlite3_backup_pagecount()]]
+ ** <b>sqlite3_backup_remaining() and sqlite3_backup_pagecount()</b>
+ **
+ ** ^Each call to sqlite3_backup_step() sets two values inside
+ ** the [sqlite3_backup] object: the number of pages still to be backed
+ ** up and the total number of pages in the source database file.
+ ** The sqlite3_backup_remaining() and sqlite3_backup_pagecount() interfaces
+ ** retrieve these two values, respectively.
+ **
+ ** ^The values returned by these functions are only updated by
+ ** sqlite3_backup_step(). ^If the source database is modified during a backup
+ ** operation, then the values are not updated to account for any extra
+ ** pages that need to be updated or the size of the source database file
+ ** changing.
+ **
+ ** <b>Concurrent Usage of Database Handles</b>
+ **
+ ** ^The source [database connection] may be used by the application for other
+ ** purposes while a backup operation is underway or being initialized.
+ ** ^If SQLite is compiled and configured to support threadsafe database
+ ** connections, then the source database connection may be used concurrently
+ ** from within other threads.
+ **
+ ** However, the application must guarantee that the destination
+ ** [database connection] is not passed to any other API (by any thread) after
+ ** sqlite3_backup_init() is called and before the corresponding call to
+ ** sqlite3_backup_finish().  SQLite does not currently check to see
+ ** if the application incorrectly accesses the destination [database connection]
+ ** and so no error code is reported, but the operations may malfunction
+ ** nevertheless.  Use of the destination database connection while a
+ ** backup is in progress might also also cause a mutex deadlock.
+ **
+ ** If running in [shared cache mode], the application must
+ ** guarantee that the shared cache used by the destination database
+ ** is not accessed while the backup is running. In practice this means
+ ** that the application must guarantee that the disk file being
+ ** backed up to is not accessed by any connection within the process,
+ ** not just the specific connection that was passed to sqlite3_backup_init().
+ **
+ ** The [sqlite3_backup] object itself is partially threadsafe. Multiple
+ ** threads may safely make multiple concurrent calls to sqlite3_backup_step().
+ ** However, the sqlite3_backup_remaining() and sqlite3_backup_pagecount()
+ ** APIs are not strictly speaking threadsafe. If they are invoked at the
+ ** same time as another thread is invoking sqlite3_backup_step() it is
+ ** possible that they return invalid values.
+ */
+ SQLITE_API sqlite3_backup *sqlite3_backup_init(
+   sqlite3 *pDest,                        /* Destination database handle */
+   const char *zDestName,                 /* Destination database name */
+   sqlite3 *pSource,                      /* Source database handle */
+   const char *zSourceName                /* Source database name */
+ );
+ SQLITE_API int sqlite3_backup_step(sqlite3_backup *p, int nPage);
+ SQLITE_API int sqlite3_backup_finish(sqlite3_backup *p);
+ SQLITE_API int sqlite3_backup_remaining(sqlite3_backup *p);
+ SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup *p);
+ /*
+ ** CAPI3REF: Unlock Notification
+ **
+ ** ^When running in shared-cache mode, a database operation may fail with
+ ** an [SQLITE_LOCKED] error if the required locks on the shared-cache or
+ ** individual tables within the shared-cache cannot be obtained. See
+ ** [SQLite Shared-Cache Mode] for a description of shared-cache locking.
+ ** ^This API may be used to register a callback that SQLite will invoke
+ ** when the connection currently holding the required lock relinquishes it.
+ ** ^This API is only available if the library was compiled with the
+ ** [SQLITE_ENABLE_UNLOCK_NOTIFY] C-preprocessor symbol defined.
+ **
+ ** See Also: [Using the SQLite Unlock Notification Feature].
+ **
+ ** ^Shared-cache locks are released when a database connection concludes
+ ** its current transaction, either by committing it or rolling it back.
+ **
+ ** ^When a connection (known as the blocked connection) fails to obtain a
+ ** shared-cache lock and SQLITE_LOCKED is returned to the caller, the
+ ** identity of the database connection (the blocking connection) that
+ ** has locked the required resource is stored internally. ^After an
+ ** application receives an SQLITE_LOCKED error, it may call the
+ ** sqlite3_unlock_notify() method with the blocked connection handle as
+ ** the first argument to register for a callback that will be invoked
+ ** when the blocking connections current transaction is concluded. ^The
+ ** callback is invoked from within the [sqlite3_step] or [sqlite3_close]
+ ** call that concludes the blocking connections transaction.
+ **
+ ** ^(If sqlite3_unlock_notify() is called in a multi-threaded application,
+ ** there is a chance that the blocking connection will have already
+ ** concluded its transaction by the time sqlite3_unlock_notify() is invoked.
+ ** If this happens, then the specified callback is invoked immediately,
+ ** from within the call to sqlite3_unlock_notify().)^
+ **
+ ** ^If the blocked connection is attempting to obtain a write-lock on a
+ ** shared-cache table, and more than one other connection currently holds
+ ** a read-lock on the same table, then SQLite arbitrarily selects one of
+ ** the other connections to use as the blocking connection.
+ **
+ ** ^(There may be at most one unlock-notify callback registered by a
+ ** blocked connection. If sqlite3_unlock_notify() is called when the
+ ** blocked connection already has a registered unlock-notify callback,
+ ** then the new callback replaces the old.)^ ^If sqlite3_unlock_notify() is
+ ** called with a NULL pointer as its second argument, then any existing
+ ** unlock-notify callback is canceled. ^The blocked connections
+ ** unlock-notify callback may also be canceled by closing the blocked
+ ** connection using [sqlite3_close()].
+ **
+ ** The unlock-notify callback is not reentrant. If an application invokes
+ ** any sqlite3_xxx API functions from within an unlock-notify callback, a
+ ** crash or deadlock may be the result.
+ **
+ ** ^Unless deadlock is detected (see below), sqlite3_unlock_notify() always
+ ** returns SQLITE_OK.
+ **
+ ** <b>Callback Invocation Details</b>
+ **
+ ** When an unlock-notify callback is registered, the application provides a
+ ** single void* pointer that is passed to the callback when it is invoked.
+ ** However, the signature of the callback function allows SQLite to pass
+ ** it an array of void* context pointers. The first argument passed to
+ ** an unlock-notify callback is a pointer to an array of void* pointers,
+ ** and the second is the number of entries in the array.
+ **
+ ** When a blocking connections transaction is concluded, there may be
+ ** more than one blocked connection that has registered for an unlock-notify
+ ** callback. ^If two or more such blocked connections have specified the
+ ** same callback function, then instead of invoking the callback function
+ ** multiple times, it is invoked once with the set of void* context pointers
+ ** specified by the blocked connections bundled together into an array.
+ ** This gives the application an opportunity to prioritize any actions
+ ** related to the set of unblocked database connections.
+ **
+ ** <b>Deadlock Detection</b>
+ **
+ ** Assuming that after registering for an unlock-notify callback a
+ ** database waits for the callback to be issued before taking any further
+ ** action (a reasonable assumption), then using this API may cause the
+ ** application to deadlock. For example, if connection X is waiting for
+ ** connection Y's transaction to be concluded, and similarly connection
+ ** Y is waiting on connection X's transaction, then neither connection
+ ** will proceed and the system may remain deadlocked indefinitely.
+ **
+ ** To avoid this scenario, the sqlite3_unlock_notify() performs deadlock
+ ** detection. ^If a given call to sqlite3_unlock_notify() would put the
+ ** system in a deadlocked state, then SQLITE_LOCKED is returned and no
+ ** unlock-notify callback is registered. The system is said to be in
+ ** a deadlocked state if connection A has registered for an unlock-notify
+ ** callback on the conclusion of connection B's transaction, and connection
+ ** B has itself registered for an unlock-notify callback when connection
+ ** A's transaction is concluded. ^Indirect deadlock is also detected, so
+ ** the system is also considered to be deadlocked if connection B has
+ ** registered for an unlock-notify callback on the conclusion of connection
+ ** C's transaction, where connection C is waiting on connection A. ^Any
+ ** number of levels of indirection are allowed.
+ **
+ ** <b>The "DROP TABLE" Exception</b>
+ **
+ ** When a call to [sqlite3_step()] returns SQLITE_LOCKED, it is almost
+ ** always appropriate to call sqlite3_unlock_notify(). There is however,
+ ** one exception. When executing a "DROP TABLE" or "DROP INDEX" statement,
+ ** SQLite checks if there are any currently executing SELECT statements
+ ** that belong to the same connection. If there are, SQLITE_LOCKED is
+ ** returned. In this case there is no "blocking connection", so invoking
+ ** sqlite3_unlock_notify() results in the unlock-notify callback being
+ ** invoked immediately. If the application then re-attempts the "DROP TABLE"
+ ** or "DROP INDEX" query, an infinite loop might be the result.
+ **
+ ** One way around this problem is to check the extended error code returned
+ ** by an sqlite3_step() call. ^(If there is a blocking connection, then the
+ ** extended error code is set to SQLITE_LOCKED_SHAREDCACHE. Otherwise, in
+ ** the special "DROP TABLE/INDEX" case, the extended error code is just
+ ** SQLITE_LOCKED.)^
+ */
+ SQLITE_API int sqlite3_unlock_notify(
+   sqlite3 *pBlocked,                          /* Waiting connection */
+   void (*xNotify)(void **apArg, int nArg),    /* Callback function to invoke */
+   void *pNotifyArg                            /* Argument to pass to xNotify */
+ );
+ /*
+ ** CAPI3REF: String Comparison
+ **
+ ** ^The [sqlite3_stricmp()] and [sqlite3_strnicmp()] APIs allow applications
+ ** and extensions to compare the contents of two buffers containing UTF-8
+ ** strings in a case-independent fashion, using the same definition of "case
+ ** independence" that SQLite uses internally when comparing identifiers.
+ */
+ SQLITE_API int sqlite3_stricmp(const char *, const char *);
+ SQLITE_API int sqlite3_strnicmp(const char *, const char *, int);
+ /*
+ ** CAPI3REF: String Globbing
+ *
+ ** ^The [sqlite3_strglob(P,X)] interface returns zero if string X matches
+ ** the glob pattern P, and it returns non-zero if string X does not match
+ ** the glob pattern P.  ^The definition of glob pattern matching used in
+ ** [sqlite3_strglob(P,X)] is the same as for the "X GLOB P" operator in the
+ ** SQL dialect used by SQLite.  ^The sqlite3_strglob(P,X) function is case
+ ** sensitive.
+ **
+ ** Note that this routine returns zero on a match and non-zero if the strings
+ ** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()].
+ */
+ SQLITE_API int sqlite3_strglob(const char *zGlob, const char *zStr);
+ /*
+ ** CAPI3REF: Error Logging Interface
+ **
+ ** ^The [sqlite3_log()] interface writes a message into the [error log]
+ ** established by the [SQLITE_CONFIG_LOG] option to [sqlite3_config()].
+ ** ^If logging is enabled, the zFormat string and subsequent arguments are
+ ** used with [sqlite3_snprintf()] to generate the final output string.
+ **
+ ** The sqlite3_log() interface is intended for use by extensions such as
+ ** virtual tables, collating functions, and SQL functions.  While there is
+ ** nothing to prevent an application from calling sqlite3_log(), doing so
+ ** is considered bad form.
+ **
+ ** The zFormat string must not be NULL.
+ **
+ ** To avoid deadlocks and other threading problems, the sqlite3_log() routine
+ ** will not use dynamically allocated memory.  The log message is stored in
+ ** a fixed-length buffer on the stack.  If the log message is longer than
+ ** a few hundred characters, it will be truncated to the length of the
+ ** buffer.
+ */
+ SQLITE_API void sqlite3_log(int iErrCode, const char *zFormat, ...);
+ /*
+ ** CAPI3REF: Write-Ahead Log Commit Hook
+ **
+ ** ^The [sqlite3_wal_hook()] function is used to register a callback that
+ ** will be invoked each time a database connection commits data to a
+ ** [write-ahead log] (i.e. whenever a transaction is committed in
+ ** [journal_mode | journal_mode=WAL mode]).
+ **
+ ** ^The callback is invoked by SQLite after the commit has taken place and
+ ** the associated write-lock on the database released, so the implementation
+ ** may read, write or [checkpoint] the database as required.
+ **
+ ** ^The first parameter passed to the callback function when it is invoked
+ ** is a copy of the third parameter passed to sqlite3_wal_hook() when
+ ** registering the callback. ^The second is a copy of the database handle.
+ ** ^The third parameter is the name of the database that was written to -
+ ** either "main" or the name of an [ATTACH]-ed database. ^The fourth parameter
+ ** is the number of pages currently in the write-ahead log file,
+ ** including those that were just committed.
+ **
+ ** The callback function should normally return [SQLITE_OK].  ^If an error
+ ** code is returned, that error will propagate back up through the
+ ** SQLite code base to cause the statement that provoked the callback
+ ** to report an error, though the commit will have still occurred. If the
+ ** callback returns [SQLITE_ROW] or [SQLITE_DONE], or if it returns a value
+ ** that does not correspond to any valid SQLite error code, the results
+ ** are undefined.
+ **
+ ** A single database handle may have at most a single write-ahead log callback
+ ** registered at one time. ^Calling [sqlite3_wal_hook()] replaces any
+ ** previously registered write-ahead log callback. ^Note that the
+ ** [sqlite3_wal_autocheckpoint()] interface and the
+ ** [wal_autocheckpoint pragma] both invoke [sqlite3_wal_hook()] and will
+ ** those overwrite any prior [sqlite3_wal_hook()] settings.
+ */
+ SQLITE_API void *sqlite3_wal_hook(
+   sqlite3*,
+   int(*)(void *,sqlite3*,const char*,int),
+   void*
+ );
+ /*
+ ** CAPI3REF: Configure an auto-checkpoint
+ **
+ ** ^The [sqlite3_wal_autocheckpoint(D,N)] is a wrapper around
+ ** [sqlite3_wal_hook()] that causes any database on [database connection] D
+ ** to automatically [checkpoint]
+ ** after committing a transaction if there are N or
+ ** more frames in the [write-ahead log] file.  ^Passing zero or
+ ** a negative value as the nFrame parameter disables automatic
+ ** checkpoints entirely.
+ **
+ ** ^The callback registered by this function replaces any existing callback
+ ** registered using [sqlite3_wal_hook()].  ^Likewise, registering a callback
+ ** using [sqlite3_wal_hook()] disables the automatic checkpoint mechanism
+ ** configured by this function.
+ **
+ ** ^The [wal_autocheckpoint pragma] can be used to invoke this interface
+ ** from SQL.
+ **
+ ** ^Every new [database connection] defaults to having the auto-checkpoint
+ ** enabled with a threshold of 1000 or [SQLITE_DEFAULT_WAL_AUTOCHECKPOINT]
+ ** pages.  The use of this interface
+ ** is only necessary if the default setting is found to be suboptimal
+ ** for a particular application.
+ */
+ SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db, int N);
+ /*
+ ** CAPI3REF: Checkpoint a database
+ **
+ ** ^The [sqlite3_wal_checkpoint(D,X)] interface causes database named X
+ ** on [database connection] D to be [checkpointed].  ^If X is NULL or an
+ ** empty string, then a checkpoint is run on all databases of
+ ** connection D.  ^If the database connection D is not in
+ ** [WAL | write-ahead log mode] then this interface is a harmless no-op.
+ **
+ ** ^The [wal_checkpoint pragma] can be used to invoke this interface
+ ** from SQL.  ^The [sqlite3_wal_autocheckpoint()] interface and the
+ ** [wal_autocheckpoint pragma] can be used to cause this interface to be
+ ** run whenever the WAL reaches a certain size threshold.
+ **
+ ** See also: [sqlite3_wal_checkpoint_v2()]
+ */
+ SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
+ /*
+ ** CAPI3REF: Checkpoint a database
+ **
+ ** Run a checkpoint operation on WAL database zDb attached to database
+ ** handle db. The specific operation is determined by the value of the
+ ** eMode parameter:
+ **
+ ** <dl>
+ ** <dt>SQLITE_CHECKPOINT_PASSIVE<dd>
+ **   Checkpoint as many frames as possible without waiting for any database
+ **   readers or writers to finish. Sync the db file if all frames in the log
+ **   are checkpointed. This mode is the same as calling
+ **   sqlite3_wal_checkpoint(). The busy-handler callback is never invoked.
+ **
+ ** <dt>SQLITE_CHECKPOINT_FULL<dd>
+ **   This mode blocks (calls the busy-handler callback) until there is no
+ **   database writer and all readers are reading from the most recent database
+ **   snapshot. It then checkpoints all frames in the log file and syncs the
+ **   database file. This call blocks database writers while it is running,
+ **   but not database readers.
+ **
+ ** <dt>SQLITE_CHECKPOINT_RESTART<dd>
+ **   This mode works the same way as SQLITE_CHECKPOINT_FULL, except after
+ **   checkpointing the log file it blocks (calls the busy-handler callback)
+ **   until all readers are reading from the database file only. This ensures
+ **   that the next client to write to the database file restarts the log file
+ **   from the beginning. This call blocks database writers while it is running,
+ **   but not database readers.
+ ** </dl>
+ **
+ ** If pnLog is not NULL, then *pnLog is set to the total number of frames in
+ ** the log file before returning. If pnCkpt is not NULL, then *pnCkpt is set to
+ ** the total number of checkpointed frames (including any that were already
+ ** checkpointed when this function is called). *pnLog and *pnCkpt may be
+ ** populated even if sqlite3_wal_checkpoint_v2() returns other than SQLITE_OK.
+ ** If no values are available because of an error, they are both set to -1
+ ** before returning to communicate this to the caller.
+ **
+ ** All calls obtain an exclusive "checkpoint" lock on the database file. If
+ ** any other process is running a checkpoint operation at the same time, the
+ ** lock cannot be obtained and SQLITE_BUSY is returned. Even if there is a
+ ** busy-handler configured, it will not be invoked in this case.
+ **
+ ** The SQLITE_CHECKPOINT_FULL and RESTART modes also obtain the exclusive
+ ** "writer" lock on the database file. If the writer lock cannot be obtained
+ ** immediately, and a busy-handler is configured, it is invoked and the writer
+ ** lock retried until either the busy-handler returns 0 or the lock is
+ ** successfully obtained. The busy-handler is also invoked while waiting for
+ ** database readers as described above. If the busy-handler returns 0 before
+ ** the writer lock is obtained or while waiting for database readers, the
+ ** checkpoint operation proceeds from that point in the same way as
+ ** SQLITE_CHECKPOINT_PASSIVE - checkpointing as many frames as possible
+ ** without blocking any further. SQLITE_BUSY is returned in this case.
+ **
+ ** If parameter zDb is NULL or points to a zero length string, then the
+ ** specified operation is attempted on all WAL databases. In this case the
+ ** values written to output parameters *pnLog and *pnCkpt are undefined. If
+ ** an SQLITE_BUSY error is encountered when processing one or more of the
+ ** attached WAL databases, the operation is still attempted on any remaining
+ ** attached databases and SQLITE_BUSY is returned to the caller. If any other
+ ** error occurs while processing an attached database, processing is abandoned
+ ** and the error code returned to the caller immediately. If no error
+ ** (SQLITE_BUSY or otherwise) is encountered while processing the attached
+ ** databases, SQLITE_OK is returned.
+ **
+ ** If database zDb is the name of an attached database that is not in WAL
+ ** mode, SQLITE_OK is returned and both *pnLog and *pnCkpt set to -1. If
+ ** zDb is not NULL (or a zero length string) and is not the name of any
+ ** attached database, SQLITE_ERROR is returned to the caller.
+ */
+ SQLITE_API int sqlite3_wal_checkpoint_v2(
+   sqlite3 *db,                    /* Database handle */
+   const char *zDb,                /* Name of attached database (or NULL) */
+   int eMode,                      /* SQLITE_CHECKPOINT_* value */
+   int *pnLog,                     /* OUT: Size of WAL log in frames */
+   int *pnCkpt                     /* OUT: Total number of frames checkpointed */
+ );
+ /*
+ ** CAPI3REF: Checkpoint operation parameters
+ **
+ ** These constants can be used as the 3rd parameter to
+ ** [sqlite3_wal_checkpoint_v2()].  See the [sqlite3_wal_checkpoint_v2()]
+ ** documentation for additional information about the meaning and use of
+ ** each of these values.
+ */
+ #define SQLITE_CHECKPOINT_PASSIVE 0
+ #define SQLITE_CHECKPOINT_FULL    1
+ #define SQLITE_CHECKPOINT_RESTART 2
+ /*
+ ** CAPI3REF: Virtual Table Interface Configuration
+ **
+ ** This function may be called by either the [xConnect] or [xCreate] method
+ ** of a [virtual table] implementation to configure
+ ** various facets of the virtual table interface.
+ **
+ ** If this interface is invoked outside the context of an xConnect or
+ ** xCreate virtual table method then the behavior is undefined.
+ **
+ ** At present, there is only one option that may be configured using
+ ** this function. (See [SQLITE_VTAB_CONSTRAINT_SUPPORT].)  Further options
+ ** may be added in the future.
+ */
+ SQLITE_API int sqlite3_vtab_config(sqlite3*, int op, ...);
+ /*
+ ** CAPI3REF: Virtual Table Configuration Options
+ **
+ ** These macros define the various options to the
+ ** [sqlite3_vtab_config()] interface that [virtual table] implementations
+ ** can use to customize and optimize their behavior.
+ **
+ ** <dl>
+ ** <dt>SQLITE_VTAB_CONSTRAINT_SUPPORT
+ ** <dd>Calls of the form
+ ** [sqlite3_vtab_config](db,SQLITE_VTAB_CONSTRAINT_SUPPORT,X) are supported,
+ ** where X is an integer.  If X is zero, then the [virtual table] whose
+ ** [xCreate] or [xConnect] method invoked [sqlite3_vtab_config()] does not
+ ** support constraints.  In this configuration (which is the default) if
+ ** a call to the [xUpdate] method returns [SQLITE_CONSTRAINT], then the entire
+ ** statement is rolled back as if [ON CONFLICT | OR ABORT] had been
+ ** specified as part of the users SQL statement, regardless of the actual
+ ** ON CONFLICT mode specified.
+ **
+ ** If X is non-zero, then the virtual table implementation guarantees
+ ** that if [xUpdate] returns [SQLITE_CONSTRAINT], it will do so before
+ ** any modifications to internal or persistent data structures have been made.
+ ** If the [ON CONFLICT] mode is ABORT, FAIL, IGNORE or ROLLBACK, SQLite
+ ** is able to roll back a statement or database transaction, and abandon
+ ** or continue processing the current SQL statement as appropriate.
+ ** If the ON CONFLICT mode is REPLACE and the [xUpdate] method returns
+ ** [SQLITE_CONSTRAINT], SQLite handles this as if the ON CONFLICT mode
+ ** had been ABORT.
+ **
+ ** Virtual table implementations that are required to handle OR REPLACE
+ ** must do so within the [xUpdate] method. If a call to the
+ ** [sqlite3_vtab_on_conflict()] function indicates that the current ON
+ ** CONFLICT policy is REPLACE, the virtual table implementation should
+ ** silently replace the appropriate rows within the xUpdate callback and
+ ** return SQLITE_OK. Or, if this is not possible, it may return
+ ** SQLITE_CONSTRAINT, in which case SQLite falls back to OR ABORT
+ ** constraint handling.
+ ** </dl>
+ */
+ #define SQLITE_VTAB_CONSTRAINT_SUPPORT 1
+ /*
+ ** CAPI3REF: Determine The Virtual Table Conflict Policy
+ **
+ ** This function may only be called from within a call to the [xUpdate] method
+ ** of a [virtual table] implementation for an INSERT or UPDATE operation. ^The
+ ** value returned is one of [SQLITE_ROLLBACK], [SQLITE_IGNORE], [SQLITE_FAIL],
+ ** [SQLITE_ABORT], or [SQLITE_REPLACE], according to the [ON CONFLICT] mode
+ ** of the SQL statement that triggered the call to the [xUpdate] method of the
+ ** [virtual table].
+ */
+ SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *);
+ /*
+ ** CAPI3REF: Conflict resolution modes
+ **
+ ** These constants are returned by [sqlite3_vtab_on_conflict()] to
+ ** inform a [virtual table] implementation what the [ON CONFLICT] mode
+ ** is for the SQL statement being evaluated.
+ **
+ ** Note that the [SQLITE_IGNORE] constant is also used as a potential
+ ** return value from the [sqlite3_set_authorizer()] callback and that
+ ** [SQLITE_ABORT] is also a [result code].
+ */
+ #define SQLITE_ROLLBACK 1
+ /* #define SQLITE_IGNORE 2 // Also used by sqlite3_authorizer() callback */
+ #define SQLITE_FAIL     3
+ /* #define SQLITE_ABORT 4  // Also an error code */
+ #define SQLITE_REPLACE  5
  /*
- Line 5410  int sqlite3_test_control(int op, ...);
+ Line 7235  int sqlite3_test_control(int op, ...);
  #ifdef __cplusplus
  }  /* End of the 'extern "C"' block */
  #endif
+ #endif /* _SQLITE3_H_ */
+ /*
+ ** 2010 August 30
+ **
+ ** The author disclaims copyright to this source code.  In place of
+ ** a legal notice, here is a blessing:
+ **
+ **    May you do good and not evil.
+ **    May you find forgiveness for yourself and forgive others.
+ **    May you share freely, never taking more than you give.
+ **
+ *************************************************************************
+ */
+ #ifndef _SQLITE3RTREE_H_
+ #define _SQLITE3RTREE_H_
+ #ifdef __cplusplus
+ extern "C" {
+ #endif
+ typedef struct sqlite3_rtree_geometry sqlite3_rtree_geometry;
+ /*
+ ** Register a geometry callback named zGeom that can be used as part of an
+ ** R-Tree geometry query as follows:
+ **
+ **   SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zGeom(... params ...)
+ */
+ SQLITE_API int sqlite3_rtree_geometry_callback(
+   sqlite3 *db,
+   const char *zGeom,
+ #ifdef SQLITE_RTREE_INT_ONLY
+   int (*xGeom)(sqlite3_rtree_geometry*, int n, sqlite3_int64 *a, int *pRes),
+ #else
+   int (*xGeom)(sqlite3_rtree_geometry*, int n, double *a, int *pRes),
+ #endif
+   void *pContext
+ );
+ /*
+ ** A pointer to a structure of the following type is passed as the first
+ ** argument to callbacks registered using rtree_geometry_callback().
+ */
+ struct sqlite3_rtree_geometry {
+   void *pContext;                 /* Copy of pContext passed to s_r_g_c() */
+   int nParam;                     /* Size of array aParam[] */
+   double *aParam;                 /* Parameters passed to SQL geom function */
+   void *pUser;                    /* Callback implementation user data */
+   void (*xDelUser)(void *);       /* Called by SQLite to clean up pUser */
+ };
+ #ifdef __cplusplus
+ }  /* end of the 'extern "C"' block */
  #endif
+ #endif  /* ifndef _SQLITE3RTREE_H_ */

E-mail:

Removed from v.1.4
changed lines
	Added in v.1.5